Section 1: PRODUCT AND COMPANY IDENTIFICATION. Section 2: HAZARDS IDENTIFICATION

Transcription

1 PreparedinaccordancewithGB/T ,GB/TGB/T ,GB ,GB/T Globally Harmonized System (GHS) Print Date: 20/Aug/2016 Page 1 of 7 Section 1: PRODUCT AND COMPANY IDENTIFICATION Product Name: Product use Uses advised against Chemical Name Company: Manufacture of pulp, paper and paper products known Sodium Aluminosilicate J.M. Huber India Private Limited 754, Jhagadia Industrial Estate, GIDC Taluka Jhagadia, Dist Bharuch Telephone: Telefax Telephone CHEMTREC: or International Internet hubermaterials@huber.com Section 2: HAZARDS IDENTIFICATION GHS Classification Physical Hazard Health Hazard Environmental Hazard GHS Label Elements, including precautionary statements Symbols/Pictogram Signal Word Precautionary Statements Prevention Response Avoid release to the environment Observe good industrial hygiene practices. Avoid breathing dust. Use mechanical ventilation (dilution and local exhaust) to control exposure Wash skin with soap and water. If skin irritation occurs: Get medical advice/attention

2 Print Date: 20/Aug/2016 Page 2 of 7 Spills and Leaks Storage Disposal Collect spillage Store in a dry place Store away from incompatible materials. Dispose in accordance with local, state and national regulations Section 3: COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS Number China (IECSC) TSCA: United States Sodium Aluminosilicate Y Y REACH China registratio classification n number Not dangerous goods. Weight-% 100 Section 4: FIRST AID MEASURES General Advice Eye Contact Skin Contact Inhalation Ingestion Notes to Physician Personal Protective Equipment For First Aid Responders Expected acute symptoms and delayed symptoms Hold eyelids apart and flush eyes with a steady, gentle stream of water for several minutes. Wash skin with soap and water Move person to fresh air If conscious, wash out mouth and give water to drink Treat symptomatically Wear suitable protective clothing IF exposed or concerned: Get medical advice/attention Section 5: FIRE FIGHTING MEASURES Flammable Properties Suitable Extinguishing Media known Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Unsuitable extinguishing media: Specific Hazards Arising from the Chemical Protective Equipment and Precautions for Firefighters Wear self-contained breathing apparatus and protective suit

3 Print Date: 20/Aug/2016 Page 3 of 7 Section 6: SPILLAGE, ACCIDENTAL RELEASE MEASURES Personal Precautions Environmental Precautions Methods for cleaning up Ensure adequate ventilation. Avoid dust formation. Avoid inhalation of dust. Refer to Section 8 for personal protective equipment. Prevent from entering into soil, ditches, sewers and waterways. Sweep or vacuum spilled material Dispose of according to local and regional authority requirements Section 7: HANDLING AND STORAGE Handling Storage In case of exposure to environments exceeding the occupational exposure limit, wear a respirator in compliance with national legislation. Keep container tightly closed in a dry and well-ventilated place Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Chemical Name China Japan ISHL ACL Japan JSOH TWA Personal Protective Equipment Eye/Face Protection TWA: 1 mg/m 3 respirable fraction Not established Not established Tightly fitting safety goggles Sodium Aluminosilicate Skin and Body Protection Hand Protection Respiratory Protection Hygiene Measures Wear body protection appropriate to handling activities Protective gloves. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Handle in accordance with good industrial hygiene and safety practice Section 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on basic physical and chemical properties Physical State Odor Threshold ph: Solid Powder No information available % Water suspension Melting point / Freezing point > 3092 F (> 1700 C) 101,3 kpa Flash Point:

4 Print Date: 20/Aug/2016 Page 4 of 7 Evaporation Rate Flammability (solid, gas) Upper flammability limit: Lower flammability limit: Vapor Pressure Vapor Density Relative Density No data available No data available 2,2 g/m³ Water Solubility mg/l (Na+, Al3+, SiO2) (20 C, ph ~9) Partition coefficient Autoignition Temperature Decomposition Temperature Viscosity Viscosity, kinematic Not available No data available No data available. Explosive Properties Oxidizing Properties 9.2. Other information Section 10: STABILITY AND REACTIVITY Stability Conditions to avoid: Incompatible Products: Hazardous decomposition products Hazardous Reactions Hazardous polymerization: Stable No materials to be especially mentioned under normal processing under normal processing Product Information Section 11: TOXICOLOGICAL INFORMATION Inhalation Eye Contact

5 Print Date: 20/Aug/2016 Page 5 of 7 Skin Contact Acute Toxicity Chemical Name Oral LD50 Dermal LD50 Inhalation LC50 Sodium Aluminosilicate >5000 mg/kg (rat) >2000 mg/kg (rat) >18.3 mg/l 1-hour (rat) Chronic Toxicity Carcinogenicity Corrosivity Sensitization Mutagenic effects Reproductive Toxicity Developmental Toxicity Target Organ Effects Section 12: ECOLOGICAL INFORMATION Ecotoxicity Chemical Name Toxicity to Algae Toxicity to Fish Toxicity to Microorganisms Daphnia Magna (Water Flea) Sodium Aluminosilicate EC0 (Fish) > 1000 mg/l EC0 (Daphnia = 1800 mg/l) Persistence / Degradability This substance does not meet the criteria for classification as PBT or vpvb Bioaccumulation Mobility No information available No information available Section 13: DISPOSAL CONSIDERATIONS Waste from Residues/Unused Products Contaminated Packaging: Dispose of in accordance with local regulations Dispose of contents/container to an approved waste disposal plant Section 14: TRANSPORT INFORMATION Mode of Transportation (Road, Water, Air, Rail) DOT ADR

6 Print Date: 20/Aug/2016 Page 6 of 7 RID ADN IATA IMDG/IMO ICAO UN number UN proper shipping name Transport hazard class(es) Packing group Environmental hazards No Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Section 15: REGULATORY INFORMATION Safety, health and environmental regulations/legislation specific for the substance or mixture Global Inventories Chemical Name Sodium Aluminosilicate CAS Number Legend Y: Yes N: No Exempt EC No REACH registration number Australia (AICS) Canada (DSL) China (IECSC ) Japan South Korea (KECL) Mexico New Philippin Zealand es (PICCS) Taiwan TSCA: United States Y Y Y Y KE Y Y Y Y Y Section 16: OTHER INFORMATION Prepared by Huber Engineered Materials Global Regulatory Affairs regulatory.affairs@huber.com Reason for Revision GB/T GB/T GB GB/T Physical Hazard

7 Print Date: 20/Aug/2016 Page 7 of 7 Health Hazard Environmental Hazard GHS Label Elements, including precautionary statements Symbols/Pictogram Signal Word Disclaimer The information provided in this is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text End of