Shenzhen Bornsun Industrial Co., Ltd Material Safety Data Sheet Page 1 of 7 Revision Date: 28/01/2010

Transcription

1 Page 1 of 7 BORNSUN BN-G600 THERMALLY CONDUCTIVE COMPOUND 1 IDENTIFITACTION OF SUBSTANCE AND OF THE COMPANY 1.1 Product names : BORNSUN BN-G600 THERMALLY CONDUCTIVE COMPOUND 1.2 The manufacturer's product code: BN-G Classification of Commodities: Silicone compounds 1.4 Dangerous goods classification: Unrestricted 1.5 Corporate Profile: The manufacturer / supplier name: ADD:Blocking 7 & 17, Shanghenglang New Industrial Park, Dalang Sub-district, Bao an District, Shenzhen, China TEL: FAX: Emergency TEL: Contactor: Manager of environment, health & safety 2 COMPONENTS/COMPOSITION INFORMATION 2.1 Chemical categories: Silicone compound 2.2 Physical form: Grease 2.3 Color: Grey 2.4 The main applications:electronics / micro-electronics 2.5 Dangerous composition*: Name CAS No. % (w/w) Symbol & terms of healthy and risk No harmful ingredients *Comply to European Commission Directive 1999/45/EC (Article 3[3] 3 HAZARDS INDENTIFICATION 3.1 Risk category: No harm 3.2 Dangerous information: No harm Avoid contact with skin and eyes Using a suitable container to prevent environmental pollution The goods and containers should be as harmful waste disposal

2 Page 2 of Exposure ways: skin contact and accidental ingestion. 3.4 Health hazards: Acute Effects Eye: Direct contact may cause temporary redness and discomfort. Skin: No significant irritation expected from a single shot-term exposure. Inhalation: No significant effects expected from a single shot-term exposure. Oral: Low ingestion hazard in normal use Prolong/Repeated Exposure Effects Skin: No known applicable information Inhalation: No known applicable information Oral: No known applicable information 3.5 Signs and Symptoms of Overexposure: No known applicable information 4 FIRST AID MEASURES 4.1 Eyes: Immediately flush with water. 4.2 Skin: No first aid should be needed. 4.3 Inhalation: No first aid should be needed 4.4 Oral: No first aid should be needed 4.5:Notes to Physician: Treat symptomatically. 5 FIRE FIGHTING MEASURES 5.1 Flammability: Not burn 5.2 Flash point: Not determined 5.3 Ignition Temperature: Not determined 5.4 Flammability Limits in Air:Not determined 5.5 Extinguishing Media On large fires use dry chemical,foam or water spray. On small fires use carbon dioxide (CO2), dry chemical or water spray. Water can be used to cool fire exposed containers. 5.6 Fire Fighting Measures:Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Determine the need to evacuate or isolate the area according to your local emergency plan.

3 Page 3 of 7 Use water spray to keep fire exposed containers cool. 6 ACCIDENTAL RELEASE MEASURES Containment/Clean up: Observe all personal protection equipment recommendations described in Section 5 and 8. Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate since spilled materials, even in small quantities, may present a slip hazard. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur. Local, state and national laws and regulation may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases. 7 HANDLING AND STORAGE 7.1 Operating Note: Use with adequate ventilation. Avoid eye contact. 7.2 Storage Note: Use reasonable care and store away from oxidizing materials. 7.3 Not suitable for the packaging material: Not determined 8 EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Industrial hygiene standards: Component CAS note Contact Limits Not determined 8.2 Engineering Controls Local Ventilation: Recommended. General Ventilation: Recommended. 8.3 Personal Protective Equipment for Routing Handling Eyes: Use proper protection-safety glasses as a minimum Skin: Washing at mealtime and end of shift is adequate. Suitable Gloves:Handle in accordance with good industrial hygiene and safety practices. Inhalation: No respiratory protection should be needed. Suitable Respirator: None should be needed. 8.4 Personal Protective Equipments for spills Eyes: Use proper protection---safety glasses as a minimum. Skin: Washing at mealtime and end of shift is adequate. Inhalation/Suitable: No respiratory protection should be needed. Precautionary Measures: Avoid eye contact. Use reasonable care. Note:These precautions are for room temperature handling. Use at

4 Page 4 of 7 elevated temperature or aerosol/spray applications may require added precautions. 9 PHYSICAL AND CHEMICAL PROPERTIES 9.1 Physical Form: Grease 9.2 Color: White 9.3 Odor: Odorless 9.4 ph: Not determined 9.5 Solubility in Water: Not determined 9.6 Boiling Point: Not determined 9.7 Melting Point: Not determined 9.8 Flash Point: Not determined 9.9 Ignition Temperature :Not determined 9.10 Exposure: None 9.11 Volatile Content: Not determined 9.12 Vapor Density: Not determined 9.13 Specific Gravity: Flammability Limits in Air: Not determined 9.15 Vapor Pressure: Not determined 9.16 Viscosity: Not determined Note: The above information is not intended for use in preparing product specifications. Contact us before writing specifications. 10 STABILITY AND REACTIVITY 10.1 Chemical Stability: Stable 10.2 Reactivity Conditions to Avoid: None Hazardous Polymerization:Hazardous polymerization will not occur. Materials to Avoid: Oxidizing material can cause a reaction. Hazardous Decomposition Products: Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds; Silicon dioxide; Formaldehyde; Hydrogen; Metal oxides. 11 TOXICOLOGICAL INFORMATION

5 Page 5 of Health hazards: See section Mutagenicity: Not determined 11.3 To reproductive genetic: Not determined 11.4 Carcinogenicity: Not determined 11.5 Other health hazards information:not determined The above list of potential hazards is built on the product or similar products or components research data on product experts on the basis of the assessment. 12 ECOLOGICAL INFORMATION 12.1 Environmental Fate and Distribution: Complete information is not yet available Environmental Effects: The water organisms are toxic, and the aquatic environment has long-term harmful effects. However, due to the physical form of this product with non-water-soluble nature, the biological availability rate is very small Fate and Effects in Waste Water Treatment Plants: Complete information is not yet available. 13 DISPOSAL CONSIDERATIONS 13.1 Product Waste Disposal Methods: To be a safe approach to this product Packaging Waste Disposal Methods: In accordance with local laws and regulations on waste disposal. 14 TRANSPORT INFORMATION 14.1 DOT Road Shipment Information Not subject to DOT 14.2 Ocean Shipment(IMDG) Not subject to IMDG code 14.3 Air Shipment(IATA) Not subject to IATA regulations. 15 REGULATORY INFORMATION

6 Page 6 of 7 Chemicals stocks: IECSC: All components are listed in. EINECS: Not determined. MITI: KECL: One or more of these ingredients are not listed, or be waived or confirmation. PICCS: One or more of these ingredients are not listed or to remove TSCA: All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances. DSL: AICS: Not determined. Not determined. 16 OTHER INFORMATION Contact: Prepared by: These data are offered in good faith as typical values and not as product specifications. No warranty, either expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable. However, each user should review these recommendations in the specific context of the intended use and determine whether they are appropriate.

7 Page 7 of 7 Date: 28/01/2010 Revision