: Hydrogen Sulfide Water

Transcription

1 Date of issue: 07/30/2014 Revision date: 10/31/2017 Supersedes: 07/30/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Hydrogen Sulfide Water : LC Recommended use and restrictions on use Use of the substance/mixture Recommended use Restrictions on use 1.3. Supplier : For laboratory and manufacturing use only. : Laboratory chemicals : Not for food, drug or household use LabChem Inc Jackson's Pointe Commerce Park Building 1000, 1010 Jackson's Pointe Court Zelienople, PA USA T F info@labchem.com Emergency telephone number Emergency number : CHEMTREC: or SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Hazardous to the aquatic environment - Acute Hazard Category 2 H401 Full text of H statements : see section 16 Toxic to aquatic life 2.2. GHS Label elements, including precautionary statements GHS-US labeling Hazard statements (GHS-US) Precautionary statements (GHS-US) 2.3. Other hazards which do not result in classification Other hazards not contributing to the classification 2.4. Unknown acute toxicity (GHS US) Not applicable : H401 - Toxic to aquatic life : P273 - Avoid release to the environment P501 - Dispose of contents/container to comply with local, state and federal regulations : None under normal conditions. SECTION 3: Composition/Information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification Water (CAS-No.) Not classified Hydrogen Sulfide (CAS-No.) Flam. Gas 1, H220 Acute Tox. 2 (Inhalation), H330 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 STOT SE 3, H335 Aquatic Acute 1, H400 10/31/2017 EN (English US) Page 1

2 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects (acute and delayed) Symptoms/effects Symptoms/effects after inhalation Symptoms/effects after ingestion : Not expected to present a significant hazard under anticipated conditions of normal use. : Dizziness. Headache. : Dizziness. Headache. Gastrointestinal complaints Immediate medical attention and special treatment, if necessary Obtain medical assistance. SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media Unsuitable extinguishing media 5.2. Specific hazards arising from the chemical : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream Special protective equipment and precautions for fire-fighters Firefighting instructions Protection during firefighting SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection For non-emergency personnel Protective equipment Emergency procedures For emergency responders Protective equipment Emergency procedures : Safety glasses. Gloves. Combined gas/dust mask with filter type E/P2. : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Avoid release to the environment Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. : Keep container closed when not in use. 10/31/2017 EN (English US) 2/7

3 Incompatible products Incompatible materials : Strong oxidizers. Strong acids. : Sources of ignition. Direct sunlight. SECTION 8: Exposure controls/personal protection 8.1. Control parameters ACGIH ACGIH TWA (ppm) 1 ppm ACGIH ACGIH STEL (ppm) 5 ppm OSHA OSHA PEL (TWA) (mg/m³) 14 mg/m³ OSHA OSHA PEL (TWA) (ppm) 10 ppm OSHA OSHA PEL (STEL) (mg/m³) 21 mg/m³ OSHA OSHA PEL (STEL) (ppm) 15 ppm OSHA OSHA PEL (Ceiling) (ppm) 20 ppm IDLH US IDLH (ppm) 100 ppm NIOSH NIOSH REL (ceiling) (mg/m³) 15 mg/m³ 10 min. NIOSH NIOSH REL (ceiling) (ppm) 10 ppm 10 min. Not applicable 8.2. Appropriate engineering controls Appropriate engineering controls : Emergency eye wash fountains should be available in the immediate vicinity of any potential exposure Individual protection measures/personal protective equipment Personal protective equipment: Safety glasses. Hand protection: Wear protective gloves Eye protection: Chemical goggles or safety glasses Respiratory protection: Respiratory protection not required in normal conditions Other information: Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Color : Colorless Odor : characteristic Rotten eggs Odor threshold ph 10/31/2017 EN (English US) 3/7

4 Melting point Freezing point Boiling point Flash point Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density Specific gravity / density Solubility Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosion limits Explosive properties Oxidizing properties : Non flammable. : 1 g/ml : Soluble in water Other information SECTION 10: Stability and reactivity Reactivity Chemical stability Self-heating: may catch fire Possibility of hazardous reactions Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials Strong acids. Strong oxidizers Hazardous decomposition products May release poisonous hydrogen sulfide. SECTION 11: Toxicological information Information on toxicological effects Likely routes of exposure Acute toxicity LC50 inhalation rat (mg/l) LC50 inhalation rat (ppm) ATE US (gases) ATE US (vapors) ATE US (dust, mist) LD50 oral rat ATE US (oral) Skin corrosion/irritation : Inhalation; Skin and eye contact mg/l/4h 467 ppm/4h 467 ppmv/4h mg/l/4h mg/l/4h mg/kg mg/kg body weight 10/31/2017 EN (English US) 4/7

5 Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity single exposure Specific target organ toxicity repeated exposure Aspiration hazard Potential Adverse human health effects and symptoms Symptoms/effects after inhalation Symptoms/effects after ingestion SECTION 12: Ecological information Toxicity Ecology - water LC50 fish 1 LC50 fish 2 : Based on available data, the classification criteria are not met. : Dizziness. Headache. : Dizziness. Headache. Gastrointestinal complaints. : Toxic to aquatic life mg/l Pimephales promelas, 96H, flow-through mg/l Lepomis macrochirus, 96H, flow-through Persistence and degradability Hydrogen Sulfide Water Persistence and degradability Persistence and degradability Bioaccumulative potential Hydrogen Sulfide Water Bioaccumulative potential Bioaccumulative potential Mobility in soil Other adverse effects Effect on the global warming GWPmix comment Other information : No known effects from this product. : No known effects from this product. : Avoid release to the environment. SECTION 13: Disposal considerations Disposal methods Waste disposal recommendations Ecology - waste materials SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated : Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to comply with local, state and federal regulations. : Avoid release to the environment. 10/31/2017 EN (English US) 5/7

6 SECTION 15: Regulatory information US Federal regulations All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory RQ (Reportable quantity, section 304 of EPA's List of Lists) SARA Section 302 Threshold Planning Quantity (TPQ) 100 lb 500 lb SARA Section 311/312 Hazard Classes Delayed (chronic) health hazard Fire hazard Immediate (acute) health hazard Sudden release of pressure hazard SARA Section Emission Reporting 1 % International regulations CANADA EU-Regulations National regulations US State regulations California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or reproductive harm SECTION 16: Other information Revision date : 10/31/2017 Other information Full text of H-phrases: see section 16: H220 H315 H319 H330 H335 H400 H401 NFPA health hazard NFPA fire hazard NFPA reactivity : None. Extremely flammable gas Causes skin irritation Causes serious eye irritation Fatal if inhaled May cause respiratory irritation Very toxic to aquatic life Toxic to aquatic life : 1 - Materials that, under emergency conditions, can cause significant irritation. : 0 - Materials that will not burn under typical dire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. : 0 - Material that in themselves are normally stable, even under fire conditions. 10/31/2017 EN (English US) 6/7

7 Hazard Rating Health Flammability Physical Personal protection : 1 Slight Hazard - Irritation or minor reversible injury possible : 0 Minimal Hazard - Materials that will not burn : 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives. : G G - Safety glasses, Gloves, Vapor respirator SDS US LabChem Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and LabChem Inc assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for his application. 10/31/2017 EN (English US) 7/7