Krauss-Maffei Dynamic Crossflow Filter Efficient crossflow filtration

Transcription

1 Krauss-Maffei Dynamic Crossflow Filter Efficient crossflow filtration ASK YOUR SEPARATION SPECIALIST andritz.com/separation

2 Krauss-Maffei Dynamic Crossflow Filter Efficient crossflow filtration Crossflow filters are state-of-the-art for substances with poor filtration characteristics. The use of ceramic filter membranes is gaining popularity in successful implementation when other separation processes, besides cake-forming filtration, do not achieve the desired results. Innovative, dynamic crossflow filtration for challenging separation tasks With the Krauss-Maffei Dynamic Crossflow Filter (DCF), ANDRITZ KMPT was able to successfully enhance dynamic crossflow filtration using two shafts. The improved process is especially suited for processing sensitive or viscous products. The DCF is able to concentrate the retentate to achieve a pasty or sludge consistency. As a result, it is more efficient in recovering valuable elements than any other crossflow filtration technology. Conventional, circulating crossflow filtration minimizes the formation of a clogging layer on the filter s surface by passing a process medium over the membrane. However, this procedure is inefficient when processing sensitive or viscous products and is generally not advisable. Under these conditions, the feed cannot be concentrated into a high-viscosity retentate. This design generates a turbulent crossflow without using a pump to circulate the retentate. The wall shear stress generated is 50% higher than found in conventional crossflow filters. This greatly reduces formation of a Hermetic design Pressure up to 6 bar clogging layer, while substantially improving the filtration rate at the same time. This advantage is most evident when dealing with high-viscosity retentates. Retentate housing No circulation needed Feed slurry inlet Retentate outlet Single pass Permeate outlet The technology of the Krauss-Maffei Dynamic Crossflow Filter generates a differential speed in the oosite direction between overlaing membrane discs rotating in the same direction. Membrane discs High turbulent shear zone Shaft with permeate outlet Shaft connection Synchronization Section of a test module 2

3 Your benefits Higher permeate flux achievable Higher yield due to higher retentate concentration Processing of highly concentrated suspensions with viscosities of up to 5,000 mpas Reduced operating pressure thanks to more effective cleaning of the clogging layer (no pressure drop as in tubular membranes) Homogeneous trans-membrane pressure over the entire membrane surface Very low process volume in relation to the membrane surface Easy to inspect because the filtration surface is outside on the membrane Product subjected to low thermal load by reducing the energy input by 80% compared to conventional crossflow filters Low or no cooling required Low energy costs Substantial energy savings for subsequent drying processes Inner speed of discs Rotation of discs Outer speed of discs Relative speed of discs Krauss-Maffei Dynamic Crossflow Filter an open design Illustration of wall shear stress 3

4 Optimal process performance thanks to smarter and more compact crossflow filtration technology Do you want to increase your throughput? Or intensify your process? Or perhaps reduce your energy costs? Regardless of the demands placed on your production, we can help you lower your operating costs and improve your product quality. Generally, the main reason for installing a Krauss-Maffei Dynamic Crossflow Filter is to overcome capacity bottlenecks. The DCF represents compact technology that is straightforward to install. Retrofitting is possible in practically any building and is simpler than adding a larger dryer or a second one. When it comes to existing, conventional crossflow filters, a downstream DCF steps up the process: energy consumption is decreased, while the yield and the throughput are increased. When preparing circuit flows, contaminating particulates can be reduced significantly. For example, the Krauss-Maffei Dynamic Crossflow Filter can be installed in the bypass of a separator. Flux (llh/m²) Performance comparison Traditional crossflow Dynamic crossflow Retentate concentration (mg/ml) When we deliver our DCF with peripherals and control system in a skid-mounted format, we can put the unit into operation within two days after setting it up, thanks to the pre-configured design. GUNNAR GRIM PRODUCT MANAGER DCF CROSSFLOW-FILTER ANDRITZ SEPARATION DCF skid 4

5

6 Krauss-Maffei Dynamic Crossflow Filter Technical data and design Model Membrane Number of Filter Retentate Length Width Height Oparating Number ø membranes area volume weight of shafts (mm) (m 2 ) (l) (mm) (mm) (mm) (kg) DCF 152/S DCF 152/0, DCF 312/ /40* 1,700 1,500 1,800 1,200 2 DCF 312/ /60* 1,700 1,500 1,800 1,280 2 DCF 312/ /80* 1,300 1,500 1,900 1,350 2 DCF 312/ /100* 1,300 1,000 2,100 1,400 2 DCF 312/ /120* 1,300 1,000 2,300 1,450 2 DCF 312/ /180* 1,400 2,300 2,500 2,550 2 DCF 312/ ,450 2,400 2,500 2,900 4 DCF 312/ ,500 2,500 2,500 2,900 4 DCF 312/ ,500 2,600 2,600 3,150 4 DCF 312/ ,600 2,600 2,600 3,400 4 * = Housing available in round or oval version. All technical data are aroximate and subject to change without notice. Technical data (per module) Filter area m² Viscosity up to 5,000 mpas Membrane pore size 5 nm-2 µm Customized design Normally, standard ceramic filter membranes are installed. Upon request, we also offer metal filter membranes. p p Krauss-Maffei Dynamic Crossflow Filter a fully enclosed design 6

7 Your full-service provider With ANDRITZ SEPARATION, you gain access to one of the world s largest OEM manufacturers for solid/liquid separation systems, including such well-known brands as Bird, KHD, Guinard, and more. Whether you need spare parts, rentals, local service, repairs, upgrades, or modernization of your equipment, ANDRITZ SEPARATION is your true full-service provider. From initial consulting through to service agreements, process optimization, and training programs, we are always looking for ways to minimize downtime and increase predictability in operations while raising your overall production efficiency. Wherever you operate, our net work of 550 service specialists and global service centers ensures we ll always be there to suport you for many life cycles to come. Let s sit down and see how we could take your operations to the next level. Local suort Responsive local service centers and field service technicians Repairs & upgrades Optimization of machine and process performance, repair work, retrofitting, and modernization Second-hand & rentals Certified second-hand and rental machines Training Operator training and tailored seminars for operating and maintenance personnel OEM spare parts Filter cloths, spare and wear parts from OEM s or with OEM level quality, all readily available Service agreements Preventive maintenance, contracts for spare parts, maintenance, inspections, repairs, upgrades, operation, and equipment monitoring Process optimization Automation tools and process expertise to boost your profit Lab and on-site tests Lab and testing capabilities for process optimization and machine upgrades 7

8 What s your biggest separation challenge? ANDRITZ SEPARATION is the world s leading separation specialist with the broadest technology portfolio and more than 2,000 specialists in 40 countries. For more than 150 years, we have been a driving force in the evolution of separation solutions and services for industries ranging from environment to food, chemicals, and mining & minerals. As the OEM for many of the world s leading brands, we have the solutions and services to transform your business to meet tomorrow s changing demands wherever you are and whatever your separation challenge. Ask your separation specialist AFRICA ANDRITZ Delkor (Pty) Ltd. Phone: +27 (11) separation.za@andritz.com ASIA ANDRITZ Singapore Pte. Ltd. Phone: +65 (6512) 1800 separation.sg@andritz.com AUSTRALIA ANDRITZ Pty. Ltd. Phone: +61 (3) separation.au@andritz.com CHINA ANDRITZ (China) Ltd. Phone: +86 (757) separation.cn@andritz.com NORTH AMERICA ANDRITZ SEPARATION Inc. Phone: +1 (817) separation.us@andritz.com SOUTH AMERICA ANDRITZ SEPARATION Ltda. Phone: +55 (47) separation.bra@andritz.com PRODUCT HOME ANDRITZ KMPT GmbH Industriestrasse Vierkirchen, Germany Phone: +49 (8139) kmpt@andritz.com andritz.com/separation All data, information, statements, photographs, and graphic illustrations in this leaflet are without any obligation and raise no liabilities to or form part of any sales contracts of ANDRITZ AG or any affiliates for equipment and/or systems referred to herein. ANDRITZ AG All rights reserved. No part of this copyrighted work may be reproduced, modified or distributed in any form or by any means, or stored in any database or retrieval system, without the prior written permission of ANDRITZ AG or its affiliates. Any such unauthorized use for any purpose is a violation of the relevant copyright laws. ANDRITZ AG, Stattegger Strasse 18, 8045 Graz, Austria. PB DCF Dynamic Crossflow Filter 1.0/ EN