12 Natural Creations Luxury Flooring

Transcription

1 Environmental Product Declaration Environmental Parallel Product Declaration Vinyl Composition 20 Parallel Tile 12 Natural Creations Luxury Flooring Luxury Flooring (LVT) Committed to Sustainability. Armstrong Flooring is committed to delivering solutions that reduce the environmental impact of the buildings you create, from product design and raw material selection, to how our products are produced and delivered. This Environmental Product Declaration (EPD) was developed to document the sustainability of our products. Inside this ASTM certified ISO compliant EPD is the following: Product application and use Product ingredients and their sources Information on how LVT flooring is produced Life Cycle Assessment (LCA) results including global warming potential and primary energy usage Total impacts over the life cycle of the product Performance attributes LVT is designed to be durable, beautiful and easy to install, making it a great product for commercial applications. Luxury Flooring Parallel 20 Parallel 12 J6224 / J6124 huntington pier Functional Unit 1 m 2 of LVT 1 year service life LCA IMPACT* MEASURES Flooring Ingredients: Limestone, Polyvinyl Chloride (PVC), Dioctyl Terephthalate (DOTP), Rigid Vinyl Films * Based on CML2010 Impact Factors Visit ArmstrongFlooring.com for further information. TOTAL Primary Energy (MJ) Global Warming Potential (kg CO 2 equivalent) Acidification Potential (kg SO 2 equivalent) 7.65E Eutrophication Potential (kg PO 4 equivalent) 7.10E-03 Ozone Depletion Potential (kg R11 equivalent) 9.87E-09 Photochem Ozone Creation Potential (kg Ethene equivalent) 5.20E-03 PERFORMANCE ATTRIBUTES Acoustics NRC (Absorption) 0.05 Static Load (psi) 250 Light Reflectance up to 64% ASTM F1700 Meets Page 1 of 18

2 This document is a Type III Environmental Product Declaration by Armstrong Flooring that is certified by ASTM as conforming to the requirements of ISO ASTM has assessed that the Life Cycle Assessment (LCA) information fulfills the requirements of ISO in accordance with the instructions listed in the product category rules cited below. The intent of this document is to further the development of environmentally compatible and sustainable construction methods by providing comprehensive environmental information related to potential impacts in accordance with international standards. Declaration Number: Program Operator: Declared Product Armstrong Flooring Natural Creations, Parallel 20, and Parallel 12 captures the essence of earth's woods, stones, metals and textile designs in a wide array of tile and plank sizes. Commercial LVT combines the best of durability, ease of installation, and design to give you the look and performance you expect. Armstrong Flooring LVT is FloorScore and NSF/ANSI 332 Gold Level Certified. Declaration Type Cradle-to-Grave. Intended for Business-to-Business (B-to-B) audiences. Represents Average Performance. Applicable Countries U.S. and Canada, consistent with Product Category Rules for Environmental Product Declarations. Flooring: Carpet, Resilient, Laminate, Ceramic, Wood. NSF International. Product Application Floor covering choice in commercial spaces: Hospitality Office Education Retail Healthcare Assisted Living Content of the Declaration This declaration is complete and contains in its full form: Product Definition End of Life Stage Material Content Life Cycle Assessment Production of the Flooring Systems Additional Information, Evidence, Test Certificates Installation of Flooring Systems PCR Documentation and Verification Use Stage References Extraordinary Effects PCR Development New or Revised X Existing - For details on PCR Review, contact ncss@nsf.org PCR Reference Product Category Rules for Environmental Product Declarations. Flooring: Carpet, Resilient, Laminate, Ceramic, Wood. NSF International, Michael Overcash, PCR Review Chair. Per ISO 14025, environmental declarations from different programs (PCR) may not be comparable. EPD Date of Issue: Aug 14, 2014 EPD Period of Validity: Aug 14, 2019 Verification and Authorization of the Declaration EPD Barr Harbor Drive, West Conshohocken, PA, USA Declaration Holder: Armstrong Flooring, Inc Columbia Avenue, Lancaster, PA This declaration and the rules on which this EPD is based have been examined by an independent external verifier in accordance with ISO X Tim Brooke Vice President, Certification Date Aug 14, 2014 X Tom Gloria External Verifier Date Aug 14, 2014 ASTM certification of this EPD is not to be construed as representing aesthetics or any other attributes not specifically addressed, nor should it be construed as an ASTM endorsement of the subject of the EPD or a recommendation for its use. There is no warranty by ASTM, express or implied, as to any finding or other matter in the EPD, or as to any product covered by the EPD. The EPD holder is liable for the information and evidence on which the EPD is based. Page 2 of 18

3 Summary LCA Results Scope and Boundaries of the Life Cycle Assessment Luxury Flooring (LVT) The Life Cycle Assessment (LCA) was performed according to ISO and followed the PCR instructions. The cradle-to-grave LCA encompasses raw material production; transport of raw materials to the production facility; manufacturing of flooring; packaging; transportation to job site; use phase; and end of life including disposal or recycling. Detailed information regarding the LCA is found in Section 10. Life Cycle Assessment Summary Declared Unit: 1 m 2 of installed flooring tiles for use over 1 year, impacts based on CML 2010 Impact Factors Table 1. Life Cycle Assessment of Luxury Flooring SOURCING / IMPACT MEASURE 1,2 PRODUCTION INSTALLATION USE STAGE EXTRACTION 3 END OF LIFE TOTAL Primary Energy (MJ) Global Warming Potential (kg CO 2 equivalent) Acidification Potential (kg SO 2 equivalent) Eutrophication Potential 3- (kg PO 4 equivalent) Ozone Depletion (kg R11 equivalent) Photochem Ozone Creation Potential (kg Ethene equivalent) 1 Additional Impact Measures are included in Section Impact as based on CML 2001-Nov Use stage impacts are based on medium intensity maintenance practices as described in Section E E E E E E E E E E E E E E E E E E E E E E E E-03 Additional Information This declaration contains additional information, as listed below, that is outside the scope of the LCA. This additional information, provided by Armstrong Flooring, has not been evaluated by ASTM, but is considered useful for the purpose of comparing this EPD to other EPDs developed from the same PCR. Guidance is recommended in comparing performance data and LCA information for products that perform the same in the areas of Acoustics, Stain Resistance, Light Reflectance, Durability, Maintenance and End of Life Recyclability. Please refer to page 4 for a summary of performance attributes by item number and note the website references listed below for additional information. Resistance to Staining and Reagents: ArmstrongFlooring.com/stainresistance Health, Safety, and Installation Information: ArmstrongFlooring.com/LVT Page 3 of 18

4 Detailed LCA Results 1.0 Product Definition Luxury Flooring (LVT) 1.1 Product Definition and Description Armstrong Luxury Flooring captures the essence of earth s woods, stones, metals and original graphic designs in a wide array of tile and plank sizes. Commercial LVT combines the best of durability, technology, and design to give you the look and performance you expect. The durable, abrasionresistant wear layer allows for years of good looks while the UV-cured urethane coating provides low-maintenance options and may eliminate the need for polishes in some areas. 2.0 Product Application Armstrong Luxury Flooring is a commercial interior floor covering. To achieve consistent, high-quality installation of all products in our flooring portfolio, we have created the Armstrong Flooring Guaranteed Installation Systems manual, F This comprehensive guide to our flooring installation provides all the information needed to properly install Armstrong Flooring LVT and ensure it will look great and perform exactly as it should. This document can be referenced at: ArmstrongFlooring.com/commflooringna/guaranteed-installation-systems.html 3.0 Product Performance Attributes All Armstrong Luxury Flooring meets or exceeds the performance requirements of ASTM F 1700, Standard Specification for Solid Vinyl Floor Tile. Properly installed and maintained, LVT provides decades of performance across all commercial segments. 3.1 Performance Selection Table 2. Performance of Luxury Flooring ITEMS INCLUDED IN THIS EPD Armstrong Luxury Flooring Installation Materials: Armstrong Flooring S-288, S-543, S-240 or Flip Spray Adhesives ATTRIBUTES NRC 0.05 PSI Light Reflectance up to 64% Thermal Resistance Maintenance Materials: Armstrong Flooring S-485 Commercial Floor Cleaner (Neutral Detergent) 3.2 Key Selection Attributes Armstrong Luxury Flooring offers unique visuals, exceptional durability and easy cleanability. Designed for application over concrete, terrazzo, and other dry, structurally sound monolithic subfloors on all grade levels Armstrong Luxury Flooring will provide decades of performance. All Armstrong Luxury Flooring products are FloorScore certified and are tested and comply with the requirements of the California Department of Public Health Standard Method for the Testing & Evaluation of VOC Emissions (CDPH V1.1., 2010). Page 4 of 18

5 4.0 Product Characteristics Table 3. Product Characteristics of Luxury Flooring COMMERCIAL TILE CHARACTERISTICS PRODUCT TILE DIMENSION (IN.) THICKNESS (IN.) AVERAGE WEIGHT Overall Wear Layer (LBS/FT 2 ) Luxury Flooring 4 x x Material Content 5.1 Definitions 6 x x 24 8 x x 16 6 x x 18 9 x x 36 Finish A factory applied UV-cured layer for low maintenance. Wear Layer A clear vinyl layer that protects the design and improves durability. Printed Layer A printed vinyl layer for beautiful designs. Base Layer A limestone base with a vinyl binder for added durability. Adhesive A field applied substance used to fasten the LVT to the subfloor. Figure 1. Composition of Installed Luxury Flooring Luxury Flooring (LVT) AVERAGE WEIGHT (kg/m 2 ) Finish Wear Layer Printed Layer Base Layer Adhesive 5.2 Production of Main Materials Calcium Carbonate (Limestone) An abundant mineral used as an inert filler. Polyvinyl Chloride (PVC) A synthetic resin made from the polymerization of vinyl chloride. Plasticizer Makes vinyl soft and flexible. Stabilizer Processing aid that prevents material degradation due to heat and light. Page 5 of 18

6 5.0 Material Content (continued) Table 4. Material Content of Luxury Flooring to a Concentration of a 1,000 ppm (0.1%) COMPONENT MATERIAL CASRN MASS % AVAILABILITY ORIGIN TRANSPORTATION MODE Filler Limestone % Abundant Mineral Non-renewable Global Truck Resin Polyvinyl Chloride (PVC) % Fossil Limited Non-renewable U.S. Rail/Ship Rigid Vinyl Films Rigid Vinyl Wear Layer and Printed Film Various 10-15% Fossil Limited Non-renewable U.S. Truck/Ship Plasticizer Dioctyl Terephthalate (DOTP) % Fossil Limited Non-renewable China Truck Stabilizer Calcium Phosphate Magnesium Phosphate % Abundant Mineral Non-renewable China Truck 5.2 Production of Luxury Flooring Figure 2. Process for Manufacturing Luxury Flooring Raw Materials Arrive Raw Materials Mixed Base Layer Formed LVT Laminated Packaged Cut Sheet Cooled LVT UV-Coated Shipped to Customer Installed and Used Removed Landfill Luxury Flooring is floor tile and planks used in residential and commercial flooring applications and is comprised mostly of limestone in a vinyl binder matrix. The manufacturing process involves the hot mixing of the raw materials milled and calendered into a hot sheet which is then laminated with different layers by a hot press machine. The sheet is coated and then slowly cooled or annealed to make it stronger, before being cut into tiles. Page 6 of 18

7 6.0 Installation of Luxury Flooring 6.1 Installation Recommendations Luxury Flooring (LVT) 5.3 Health, Safety, and Environmental Aspects During Production Armstrong Flooring has a comprehensive Environmental, Health, and Safety Management Program. Risk reduction begins in the product design process. All products go through a safety, health, and environmental review prior to sale. Armstrong Flooring also has a long standing commitment to the safety and health of all our employees. The company s Safety Management Program is considered to be World Class. Our OSHA recordable incident rate is below 1.0, meaning there is less than one injury per 100 employees per year. All employees view safety as a key responsibility of their jobs. In 2010, Armstrong Flooring was named one of America s Safest Companies by EHS Today. Armstrong is equally committed to reducing our environmental impact. As with safety goals, each manufacturing facility has annual environmental plans, tailored to meet goals on energy, water, and waste reduction. Armstrong is a registered member with The Climate Registry. This means the company gets third-party verification of our global greenhouse gas (GHG) inventories, which are then made publicly available. As part of this effort, the cumulative energy usage by our facilities is reported in the Armstrong Climate Registry certification. LVT must be installed in accordance with the current edition of the Armstrong Flooring Guaranteed Installation Systems manual, F This comprehensive guide to flooring installation provides all the information needed to properly install Armstrong Luxury Flooring and ensure it will look great and perform exactly as it should. You can reference this document at: guaranteed-installation-systems.html 6.2 Health, Safety, and Environmental Aspects During Installation There are no recognized systemic hazards associated with installing LVT flooring. 6.3 Waste Installation waste is minimized by the modular aspect of the LVT flooring. A conservative 3% waste factor was assumed on-site during construction. This value is based on historic internal studies which have documented the quantity of scrap that is generated at the job site due to needed border cuts, penetrations, or installer mistakes. For this study it is assumed that all of the on-site scrap material will be sent to a landfill located within 50 miles of the job site. 6.4 Packaging Armstrong Luxury Flooring is packaged in a recyclable corrugated box. Wooden pallets are used to protect unit loads during shipping. Page 7 of 18

8 7.0 Use Stage Table 5. Estimated Maintenance Intensity for Luxury Flooring MAINTENANCE SCHEDULE NUMBER OF TIMES PERFORMED IN 1 YEAR (365 DAYS) LOW MEDIUM HIGH Sweep /Dry Mop Damp Mop Scrubbing Luxury Flooring (LVT) For this study, it was assumed that LVT would last 30 years and therefore would need to be replaced 2 times over the building s useful life if properly installed and maintained. The useful life indicated in the PCR for flooring is 60 years. Recommended maintenance practices are provided in the Armstrong Flooring Installation Guide and required as part of the warranty. Warranty details can be found at ArmstrongFlooring.com/ commflooringna/technical-downloadcenter. asp. For LVT, the recommended maintenance is representative of medium intensity maintenance, as shown in Table 5 and Figure 3. Because maintenance procedures often vary depending on the building owner s maintenance practices, level of use, and traffic conditions, Table 5 provides low, medium and high maintenance scenarios. The normalized environmental impacts associated with these hypothetical scenarios are shown in Figure 3. The low intensity maintenance scenario results in lower environmental impacts. For example, less scrubbing means less water consumption and a lower eutrophication potential. Figure 3. LCA Results for Estimated Maintenance Intensity (1 Year) Photochemical Ozone Ozone Depletion Eutrophication Acidification Global Warming Primary Energy 84% 86% 88% 90% 92% 94% 96% 98% 100% 7.1 Cleaning and Maintenance Recommended cleaning and maintenance can be found in Armstrong Flooring Installation and Maintenance Guides: ArmstrongFlooring.com/pdbupimages/ pdf 7.2 Health Aspects During Usage High Normal Low All Armstrong Luxury Flooring products are FloorScore certified and are tested and comply with the requirements of the California Department of Public Health Standard Method for the Testing & Evaluation of VOC Emissions (CDPH V1.1., 2010). Page 8 of 18

9 8.0 Extraordinary Effects 8.1 Fire Performance Luxury Flooring demonstrates the following fire performance: Class 1 when tested in accordance with ASTM E 648/NFPA 253, Standard Test Method for Critical Radiant Flux Meets 450 or less when tested in accordance with ASTM E 662/NFPA 258, Standard Test Method for Smoke Density Flame Spread Index 85 and Smoke Developed Index 385 or less when tested in accordance with CAN/ULC S102.2, Standard Test Method for Flame Spread Rating and Smoke Development 8.2 Insulation Value ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Flow Meter Apparatus R-value = 0.07 [ft 2 F h/btu] R-value = [m 2 K/W] 9.0 End of Life Stage 9.1 Disposal Disposal in municipal landfill or commercial incineration facilities is permissible and should be done in accordance with local, state, and federal regulations Life Cycle Assessment This study provides life cycle inventory and environmental impacts relevant to Armstrong Flooring systems. This LCA was conducted to 1) better understand the environmental impacts of the life cycle of flooring systems; 2) learn how the impacts of raw material selection, product formulation, and manufacturing process influence the life cycle impacts of flooring systems, and 3) use innovation to drive reduction in the product. The methods for conducting the life cycle assessments, upon which this EPD is based, were consistent with ISO and This report is intended to fulfill the reporting requirements in Section 5 of ISO and the Product Category Rules for Flooring: Carpet, Resilient, Laminate, Ceramic, Wood Information on the Product System Definition and Modeling of the Life Cycle The functional unit for this EPD is 1 m 2 of LVT for use over 1 year. Flooring System View: In order to understand the complete view of a flooring system, life cycle information is included for the total flooring system based on 1 square meter (m 2 ) view. This includes the flooring tile, adhesives and finishes applied during the use stage. Page 9 of 18

10 10.0 Life Cycle Assessment (continued) System Boundaries: The system boundaries studied as part of this life cycle assessment include extraction of primary materials, raw materials manufacture, flooring panel production, installation and end of life. The phases below outline a cradle-to-grave life cycle assessment for flooring tiles (Figure 4). Figure 4. Life cycle phases included for the Luxury Flooring in study: Sourcing / Extraction Production / Packaging Installation Phase Use Phase End of Life Figure 5. Life cycle phases included in the adhesive and polish used during the use stage of the study: Sourcing / Extraction Polish/Adhesive Production Polish/ Adhesive Packaging Installation Site As Shown in Figures 4 and 5, the Cradle-to-Grave Assessment Includes: Production including raw material and packaging materials for Luxury Flooring. Installation includes raw material for adhesive and polish Transportation of raw materials to the manufacturing facility Manufacturing of the tiles at the manufacturing facility Packaging of finished products including energy to operate packaging equipment Transportation from manufacturing facility to distribution centers, retailers, and job site (assumed to be 500 miles by truck) Use phase covers a useful life of 60 years as required by the PCR and includes the transportation and installation of the system including adhesive, polish and maintenance End of life includes landfill disposal of LVT with assumed 50 miles by truck The Cradle-to-Grave Assessment Excludes: Overhead energy usage (heating, lighting) of manufacturing facilities Maintenance and operation of support equipment Page 10 of 18

11 10.0 Life Cycle Assessment (continued) Assumptions: Armstrong Flooring began conducting life cycle assessments in 2006 and completed a baseline LCA of key flooring products in This map shows the location of the Armstrong Luxury Flooring manufacturing facility. Transportation emissions and fuels throughout the life cycle phases are included. All transportation associated with raw materials reflects the actual modes of transportation and mileage. Disposal transportation at end of life is assumed to be 50 miles. Cutoff Criteria: The cutoff criteria for the study are as follows: Mass If a flow is less than 1% of the cumulative mass of the model, it is excluded, providing its environmental relevance is not a concern. Energy If a flow is less than 1% of the cumulative energy of the model, it is excluded, providing its environmental relevance is not a concern. Environmental relevance If a flow meets the above criteria for exclusion, yet is believed to potentially have a significant environmental impact, it is included. Shanghai Luxury Flooring Manufacturing Data Quality: The LCA model was created using the GaBi 6 Software system for life cycle engineering, developed by PE INTERNATIONAL GmbH. The GaBi database provides the life cycle inventory data for several of the raw and process materials obtained from the background system. The data quality is considered to be good to high quality. With the exception of supplier specific data, all other relevant background data was taken from the GaBi database software. No data set was over 10 years old. All gate-to-gate, primary foreground data was collected for the flooring manufacturing process. This foreground data was from annual production for the year of Background data was collected from suppliers or generic data was used. When generic data was used, it was verified and triangulated against several sources. Allocation: Co-Product Allocation No co-product allocation occurs in the product system. Multi-Input Processes Allocation No multi-input allocation occurs in the product system. Reuse, Recycling, and Recovery Allocation The cut-off allocation approach is adopted in the case of any recycled content, which is assumed to enter the system burden-free. Only environmental impacts from the point of recovery and forward (e.g., collection, sorting, processing, etc.) are considered. Product and packaging waste is modeled as being disposed in a landfill rather than incinerated or recycled. Plastic and other construction waste is assumed to be inert in landfills so no system expansion or allocation is necessary as landfill gas is not produced. In the case of biobased packaging waste disposed during installation, landfill gas from the decomposition of this waste is assumed to be collected and used to produce electricity. It is assumed that this recovered energy offsets energy produced by the US average grid. Page 11 of 18

12 10.0 Life Cycle Assessment (continued) 10.2 Results of the Life Cycle Assessment The LCA results are documented separately for the following stages: 1. Sourcing/Extraction 2. Production 3. Installation 4. Use Phase 5. End of Life Table 6 shows the results for 1 m 2 of Luxury Flooring installed and maintained for one year. Table 6. LCA of LVT for 1 m 2 of installed LVT flooring including medium intensity maintenance for 1 year IMPACT MEASURE 1,2 SOURCING / EXTRACTION PRODUCTION INSTALLATION USE PHASE 3 END OF LIFE TOTAL 1 Year Use Primary Energy (MJ) Global Warming Potential (kg CO 2 equivalent) Acidification Potential (kg SO 2 equivalent) 3.34E E E E E E Eutrophication Potential (kg PO 4 equivalent) 2.80E E E E E E-03 Ozone Depletion Potential (kg R11 equivalent) 1.57E E E E E E-09 Photochem Ozone Creation Potential (kg Ethene equivalent) 60 Year Use 5.00E E E E E E-03 Primary Energy (MJ) Global Warming Potential (kg CO2 equivalent) Acidification Potential (kg SO2 equivalent) 6.67E E E E E E Eutrophication Potential (kg PO 4 equivalent) 5.60E E E E E E-02 Ozone Depletion Potential (kg R11 equivalent) 3.13E E E E E E-08 Photochem Ozone Creation Potential (kg Ethene equivalent) 1.10E E E E E E-02 1 Additional Impact Measures are included in Section Impact as based on CML 2001-Nov Use phase impacts are based on medium intensity maintenance practices as described in Section 7. Page 12 of 18

13 10.0 Life Cycle Assessment (continued) Table 7. Cradle to Gate Life Cycle Assessment Results for 1 m 2 of LVT for 1 Year IMPACT MEASURE (CML 2001-Nov. 2010) SOURCING / EXTRACTION PRODUCTION CRADLE GATE TOTAL Primary Energy (MJ) Global Warming Potential (kg CO 2 equivalent) Acidification Potential (kg SO 2 equivalent) 3.34E E E-02 Eutrophication Potential (kg PO 4 3- equivalent) 2.80E E E-03 Ozone Depletion Potential (kg R11 equivalent) 1.57E E E-09 Photochem Ozone Creation Potential (kg Ethene equivalent) 5.00E E E-03 Abiotic Depletion, Elements (kg Sb-equivalent) 3.12E E E-05 Abiotic Depletion, Fossil (MJ) Table 8. Cradle to Grave Life Cycle Assessment Results for 1 m 2 of LVT for 1 Year IMPACT MEASURE (CML 2001-Nov. 2010) CRADLE GATE INSTALLATION TOTAL IMPACTS MAINTENANCE INTENSITY END OF (Cradle Grave) LIFE LOW MED HIGH LOW MED HIGH Primary Energy (MJ) Global Warming Potential (kg CO 2 equivalent) Acidification Potential (kg SO 2 equivalent) Eutrophication Potential (kg PO 4 3- equivalent) Ozone Depletion Potential (kg R11 equivalent) E E E E E E E E E E E E E E E E E E E E E E E E E E E-09 Photochem Ozone Creation Potential 2.00E E E E E E E E E-03 (kg Ethene equivalent) Abiotic Depletion, Elements 3.13E E E E E E E E E-05 (kg Sb-equivalent) Abiotic Depletion, Fossil (MJ) Page 13 of 18

14 10.0 Life Cycle Assessment (continued) Figure 6. Life Cycle Impact Results for LVT (1 year)* Figure 6 shows the relative importance in percentage terms for the raw material Sourcing/Extraction, Production, Installation, Use, and End of Life stages for Luxury Flooring. Photochem. Ozone Creation Potential Ozone Depletion Potential Eutrophication Potential Acidification Potential Global Warming Potential 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% *Based on CML 2010 Impact Factors. Sourcing/Extraction Production Installation Use Phase End of Life Table 9. TRACI 2.0 LCA Results for 1 m 2 of LVT for 1 year IMPACT MEASURE (TRACI 2.0) SOURCING / EXTRACTION PRODUCTION INSTALLATION USE PHASE (1 yr) END OF LIFE TOTAL Global Warming Potential (kg CO 2 equivalent) Acidification Potential (kg mol H+ equivalent) Eutrophication Potential (kg PO 4 3- equivalent) Ozone Depletion Potential (kg CFC11 equivalent) Smog (kg 0 3 equivalent) E E E E E E E E E E E E Page 14 of 18

15 Header 10.0 Life Cycle Assessment (continued) Figure 7 shows the sources of primary energy separated into non-renewable and renewable resources. Figures 8 and 9 show the contribution of different resources to renewable and non-renewable primary energy. All figures refer to energy sources used to manufacture Luxury Flooring in Sources of Primary Energy Figure 7. Sources of Primary Energy Non-Renewable 97% (215 MJ) Renewable 3% (6.2 MJ) Renewable Energy by Source Figure 8. Renewable Energy by Source Solar Energy 25% Figure 9. Non-Renewable Energy by Source Oil 43% Wind Power 14% Natural Gas 36% Hydro Power 60% Lignite 1% Nuclear 7% Mineral Coal 13% Page 15 of 18

16 10.0 Life Cycle Assessment (continued) Waste and Water Consumption The waste shown in Table 10 accounts for the waste generated at Armstrong Flooring manufacturing facilities ( Production ). The Use phase waste accounts for the disposal of the packaging and scrap materials generated during installation; the quantity of flooring disposed of following removal from a building is shown in the End of Life phase. These waste values do not include the waste generated in the upstream processes. Other waste categories specified in the PCR were excluded due to data quality. The life cycle of this product consumes water during production while producing non-hazardous wastes. The quantities are separated into contribution per life cycle stage as shown in Table 10 for 1 m2 of Luxury Flooring. Table 10. Resources and Wastes for LVT (1 m 2 ) RESOURCES AND WASTES UNIT SOURCING / EXTRACTION PRODUCTION INSTALLATION USE PHASE (1 YR) END-OF-LIFE Non Renewable Material Sources kg Water Use kg Hazardous Waste Production kg Non Hazardous Waste Production kg Secondary Fuels (Net) MJ Interpretation of Life Cycle Assessment From the results of the flooring system life cycle covered in this study, it was concluded that the flooring manufacturing process and raw materials specifically, PVC in the binder have the greatest impact on Primary Energy Demand (PED) and carbon footprint (represented by Global Warming Potential [GWP]). As shown in Figure 6, End of Life impacts are minimal when compared to other life cycle stages Flooring Impacts: As shown in Table 6 on page 12, the majority of the environmental impacts for this product occurs during the extraction and processing of raw materials detailed in the Production Stage. For most flooring, the opportunity for reduction is in the manufacturing process as well as reductions associated with raw materials Use Stage: The use stage is defined in the PCR at 60 years and this is what was used in the LCA. The assumption is that the flooring requires normal maintenance as shown in Table 5. Additional details regarding the assumptions and details of how the use phase was modeled in this study can be found in Section 7. Impacts associated with the Use Stage vary depending on the building owner s maintenance practices, level of use, and traffic conditions. Figure 5 provides details of three (3) maintenance scenarios and the impacts resulting from the scenarios are provided in Table 8. The low intensity maintenance scenario results in lower environmental impacts. For example, less scrubbing means less water consumption and a lower eutrophication potential End of Life Impacts: End of Life Impacts associated with landfilling of Luxury Flooring flooring had the greatest impact on eutrophication and acidification potential. TOTAL Page 16 of 18

17 11.0 Additional Information, Evidence, Test Certificates 11.1 VOC Emissions All Armstrong Luxury Flooring products are FloorScore certified and are tested and comply with the requirements of the California Department of Public Health Standard Method for the Testing & Evaluation of VOC Emissions (CDPH V1.1., 2010) Sustainability Certifications Armstrong Luxury Flooring has been certified by ULE at the Gold Level per the NSF/ANSI 332 Standard for Sustainability Assessment for Resilient Floor Coverings References 12.1 PCR Product Category Rules for Environmental Product Declarations. Flooring: Carpet, Resilient, Laminate, Ceramic, Wood. NSF International. (2012) 12.2 Standards ISO 14025:2006 Environmental labels and declarations Type III environmental declarations - Principles and procedures ISO 14040:2006 Environmental management Life cycle assessment Principles and framework ISO 14044:2006 Environmental management Life cycle assessment Requirements and guidelines ASTM E Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source ASTM E Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials ASTM C Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ASTM C423-09a Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method ASTM F 1700, Standard Specification for Solid Vinyl Floor Tile CAN/ULC-S102, Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies and Miscellaneous Material and Assemblies 2010 Standard Method for the Testing and Evaluation of Volatile Organic Chemical Emissions from Indoor Sources Using Environmental Chambers Version 1.1 California 13.0 Third Party Evaluations Certificate of Compliance for VOC Emissions: Berkeley Analytical and FloorScore Climate Registry certification of our greenhouse gas (GHG) inventories Certificate for NSF-332 Gold Page 17 of 18

18 Header 14.0 Quality Assurance Luxury Flooring (LVT) Armstrong Flooring has a robust internal Quality Assurance process that is based on industry-accepted best practices and is led by a team of quality professionals who have been certified by the American Society for Quality. The process involves several hundred different measures made throughout the manufacturing processes. All Armstrong Luxury Flooring is manufactured in ISO 9001 certified plants References Table 11. Life Cycle Impact Assessment Categories, Indicators of Contribution to Environmental Issues, Units of Measure, and Brief Descriptions IMPACT CATEGORY INDICATOR DESCRIPTION UNIT REFERENCE Acidification Climate Change Eutrophication Ozone Creation 15.1 Definitions Acidification Potential (AP) Global Warming Potential (GWP) Eutrophication Potential (EP) Photochemical Oxidant Potential (POCP)/Smog Potential Primary Energy Demand Water Consumed Waste Disposed A measure of emissions that cause acidifying effects to the environment. The acidification potential is assigned by relating the existing S -, N -, and halogen atoms to the molecular weight. A measure of greenhouse gas emissions, such as CO 2 and methane. These emissions are causing an increase in the absorption of radiation emitted by the earth, magnifying the natural greenhouse effect. An indicator of the potential to cause an increase in biomass production. In water, this can lead to algal blooms resulting in oxygen depletion that affects higher species such as fish. Undesirable shifts in numbers of species can also occur, resulting in a threat to biodiversity. A measure of emissions of precursors that contribute to low level smog, produced by the reaction of nitrogen oxides and VOC s under the influence of UV light. A measure of the total amount of primary energy extracted from the earth. PED is expressed in energy demand from non renewable resources (e.g., petroleum, natural gas, etc.) and energy demand from renewable resources (e.g., hydropower, wind energy, solar, etc.). Efficiencies in energy conversion (e.g., power, heat, steam, etc.) are taken into account. Water consumption is the sum of all water inputs to the life cycle. Includes water required for production of raw materials, upstream datasets, and manufacturing processes. Does not capture the end of life of the water consumed. Waste disposed is the sum of all waste outputs from the life cycle. This includes hazardous and non-hazardous wastes and does not capture end of life of the waste generated. mol H + equivalent kg CO 2 equivalent kg Nitrogen equivalent kg NO X equivalent MJ gal/ft 2 lbs/ft 2 J. Bare, TRACI: The Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts 2.0, Intergovernmental Panel on Climate Change (IPCC). IPCC Guidelines for National Greenhouse Gas Inventories J. Bare, TRACI: The Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts 2.0, J. Bare, TRACI: The Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts 2.0, GaBi 6.3 LCA Modeling Software CML-2010 is an impact assessment tool developed by the Center of Environmental Science of Leiden University (CML). The CML methodology groups the LCI results into midpoint categories, according to themes. These themes are common mechanisms (e.g. climate change) or groupings. The impact categories used in this report are Global Warming Potential (GWP), Acidification Potential (AP), Eutrophication Potential (EP), Ozone Depletion Potential (ODP), Photochemical Ozone Creation Potential (POCP), Abiotic Depletion Elements (ADE) and Abiotic Depletion Fossil (ADF). F Armstrong and Armstrong Logo are trademarks of AWI Licensing LLC. FloorScore is a registered trademark of the Resilient Floor Covering Institute. is a trademark of American Society for Testing and Materials. All other marks are trademarks of Armstrong Flooring, Inc., or its subsidiaries. Page 18 of 18