Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet Product Name: Strawberry Juice Powder 1. Identification of the substance/preparation and company 1.1 Trade Name and Synonym: Strawberry Juice Powder 1.2 Company Responsible (Producer): Address: Manufacturer: SanSavon Alexandra Ticar Albstr. 6 D Eningen u. A. Tel: info@sansavon.com 2. Composition/Information on ingredients: 2.1 Identification Number: CAS Number(s): INCI Name: Hazardous Ingredients: None 3. Harzards Identification: Specific Risks: None 4. First Aid Measures: 4.1 First Aid Measures/General Information: After adequate first aid, no further treatment is required unless symptoms reappear. 4.2 Skin Contact: Flush skin with plenty of water. Wash clothing before reuse. Get medical attention if symptoms occur. 4.3 Eye Contact: Immediately rinse with clean water. Retract eyelids often. Obtain emergency medical attention if pain, blinking, tears or redness persist. 4.4 Inhalation: Remove to fresh air. If breathing is difficult, give oxygen and get medical attention. 4.5 Ingestion: For ingestion of large quantities, call a physician. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an 1

2 unconscious person. Get medical attention. 5.Fire-fighting measures: 5.1 Suitable extinguishing media: Use alcohol type aqueous film forming foam for large fires. Use CO2 or dry chemical for small fires. 5.2 Extinguishing media that must not be used for safety reasons: None known at this time. 6. Accidental release measures: 6.1 Environmental precautions-waste disposal method: Landfill solids at permitted sites. Use registered transports. Assure emissions comply with applicable regulations. Contaminated product soil, water, container residues and spill cleanup materials should not be designated as hazardous wastes. 6.2 Methods for cleaning up/taking up: Prevent flow to sewer/public waters. Spread granular cover. Soak up small spills with inert solids. Dispose of in compliance with Federal. State and Local regulations. Contain/collect rapidly to minimize dispersion. 7. Handling and Storage: 7.1 Handling: Normal handling and storage consistent with good manufacturing practices should be used. 7.2 Storage: Keep containers closed until used. To maintain product quality, do not store in heat or direct sunlight. 7.3 Reactivity Data: Not reactive. 8. Exposure controls/ personal protection: 8.1 Personal Protective Equipment: Eyes: Eye protection such as chemical splash goggles and /or face shield must be worn when possibility exits for eye contract due to splashing or spraying liquid, airborne particles, or vapor. Contract lenses must not be worn. Skin: Where use can result in skin contact, practice good personal hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking, smoking and when leaving work. Respiratory: Based on workplace contaminate level and working limits of the respirator, use a respirator approved by NIOSH/MSHA. 2

3 8.2 Hygiene measures: Use good personal hygiene practices. Wash hands before eating, drinking, smoking or using toilet facilities. Promptly remove soiled clothing wash thoroughly before reuse. Shower after work using plenty of soap and water. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. 9. Physical and chemical properties: 9.1 Appearance: Light Red Powder 9.2 Odor: Characteristic 9.3 Color: Light Red 9.4 Data relevant to safety: Avoid strong oxidizing agents. 9.5 Flash point (method N/A used): 9.6 Flammable limits: % LFL: No Information UFL: No Information 9.7 Boiling point: N/A 9.8 Specific Gravity (25C) N/A 9.9 Vapor density (air-1) N/A 9.10 Evaporation rate (buty1 N/A acetate=1) 9.11 Solubility in water Good solubility in water/ alcohol 9.12 ph(neat) (25 ): N/A 9.13 Refractive index (25 ) N/A 10. Stability and reactivity: 10.1 Hazardous reactions: Hazardous polymerization will not occur Stability Stable 10.3 Incompatibility: Keep away from sulfuric acid, phosphoric acid, acetic anhydride, strong oxidizing agent such as peroxides, oxygen, nitric acid, perchloric acid, alkaline substance or chromium trioxide Hazardous decomposition products: N/A 11. Toxicological information: 11.1 Skin: N/A 3

4 11.2 Ingestion: N/A 11.3 Inhalation: N/A 11.4 Eyes: N/A Based on information supplied to us on the chemical vendor s MSDS. 12. Ecological information: 12.1 Ecotoxicity: No aquatic toxicity information available. 13. Advice on disposal: 13.1 Contaminated packaging: Should not be considered hazardous waste. 14. Transport information: 14.1 Land Transport-Marine Transport-Air Transport: Other than normal shipping instructions and information given in the MSDS, there are no other specific U.S. Department of Transportation (DOT) regulations governing the shipment of this material. 15. Regulatory information 15.1 Labeling-(Hazardes Symbols) National Fire Protection Association Health=1 Flammability=1 Reactivity=0 Special hazard-none Hazardous Material Information System (HMIS) Health=1 Flammability=1 Reactivity=0 Personal Protection=D 16. Other information: Hazardous Products of combustion: Carbon monoxide, butadiene, acrid smoke, irritating fumes. Disclaimer: The information in this MSDS was obtained from sources, which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the material are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with handling, storage, use or disposal of the material. 4

5 This MSDS was prepared and is to be used only for this material. If the material is used as a component in another material, this MSDS information may not be applicable. 5