PERSONAL: Date of Birth, 27 September 1965

Transcription

1 CURRICULUM VITAE Associated Professor Dr. SOMRAT KERDSUWAN Department of Mechanical Engineering King Mongkut s Institute of Technology North Bangkok (KMITNB) 1518 Pibulsongkram Rd., Bangsue, Bangkok, THAILAND Tel : ext 8324, Fax : , srk@kmitnb.ac.th NAME: ACADEMIC POSITION: Somrat KERDSUWAN Associated Professor PERSONAL: Date of Birth, 27 September 1965 EDUCATION: 1994 : Diplome de Docteur de l Universite de Poitiers, Specialite Energetique (Tres horonable) 1991 : Diplome d Etude Approfondie d Energetique de l Universite de Poitiers, France, Specialite Energetique, Option Combustion : B.Eng (Mechanical Engineering) (2 nd Class Hornor) King Mongkut s Institute of Technology North Bangkok WORK EXPERIENCE 1998 Present : Director of Research Center The Waste Incineration Research Center (WIRC), KMITNB Present : Lecturer Department of Mechanical Engineering Faculty of Engineering, KMITNB : Engineer The Concrete Product and Aggregate Co.,Ltd. SPECIAL TRAINING Sep 2005 : Municipal Solid Waste Incineration Hitachi Zosen, Mitsubishi Heavy Industry Japan August 2005 : Municipal Solid Waste Incineration Richway, Hitachi Zosen, Mitsubishi Heavy Industry China, Taiwan April 2005 : Biomass Gasification Royal Institute of Technology, Sweden Nov 2003 : Automotive Engineering Institute of Automotive Engineering, RWTH-AACHEN University of Technology, C.V. of Dr. Somrat Kerdsuwan 1/7

2 Germany May 2003 : Municipal and Industrial Waste Incineration Ebara, Hitachi Zosen, NKK (JFE), Japan Dec 2002 : Dioxin Sample and Analysis SGS Belgium May 2002 : Environmental Technology Verification US. EPA USA Sep 1999 : Acoustic Leak Detection, Environmental Protection Agency of United State New Jersey, USA. April 1998 : Powerplant Simulation CORYS TESS, Oct 1997 : Landfill Symposium The Solid Waste Association of North America, USA. April 1996 : Air Pollution Measurement Environment SA., March 1995 : Municipal and Hospital Waste Management in Paris, TIRU Co.,Ltd, and ELYO Co.,Ltd. Sep 1992 : Waste Incineration Technology, Federation International of Flame. The Netherland. Dec 1991 : Municipal Waste Management in Paris, TIRU Co.,Ltd. Sep 1991 : Trosium Ecole de Combustion, COMBUSTION ENGINEERING Combustion Engineering Expert in the field of solid waste incineration, boiler and furnace and air pollution control (see project conducted and publications and communications) AUTOMOTIVE ENGINEERING Project Coordinator for Master of Science in Automotive Engineering (International Program) for Thai-German Graduate School of Engineering (TGGS), Industry Oriented Education and Research in Thailand based on the RWTH-AACHEN University of Technology model. C.V. of Dr. Somrat Kerdsuwan 2/7

3 ENERGY CONSERVATION Energy Conservation Expert with the project funding by Department of Alternative Energy Development and Efficiency, Ministry of Energy, with the following factory; 1. Molinke Health Care 2. CP Meji 3. Lucky Union Food 4. Takahata Precision (Thailand) 5. Thai Glass Industry 6. Tharn Samut Food 7. Vichien Textile Industry 8. Banglen Papermill 9. Ueno Fine Chemical PUBLICATION AND COMMUNICATION 1. Effects of operating parameters on the combustion of medical waste in a controlled air incinerator, Energy Conversion and Management, Vol. 46, pp , Effect of secondary air supply rate on the combustion of volatile gas in a controlled-air incinerator, International Journal of Energy Research, Volume 29, Issue 6, pp , An Application of High Temperature Air Combustion in A Municipal Solid Waste Combustor for Energy Saving, 5th Asia Pacific Conference on Sustainable Energy and Environmental Technologies, Wellington, New Zealand, Effect of Highly Preheated Combustion Air on Fuel Saving in a Municipal Solid Waste Incinerator, 3rd International Conference on Combustion, Incineration/Pyrolysis and Emission Control (3rd i-cipec), Zhejiang University, Hangzhou, China, October 21-23, Environmental Technology Verification for Thailand Market, 23 rd International Conference on Incineration and Thermal Treatment Technology, Phoenix, USA, High Temperature Air Combustion for Solid Waste Incineration: Effect of Air Preheating on Fuel Saving, 23 rd International Conference on Incineration and Thermal Treatment Technology, Phoenix, USA, Comparison of Three Oxidizing Agents for Efficiency of Mercury Removal in Packed-Bed Wet Scrubber From Infectious Waste Incinerator, 7 th International Conference on Energy for a Clean Environment, Lisbon, Protugal, Thermal Decomposition Characteristics of Major Components of Infectious Waste : Application to a Controlled-Air Incinerator, The 4 th Asia Pacific Conference on Sustainable Energy and Environmental Technology, Yokkaichi University, Yokkaichi, Japan, Performance Evaluation of Laboratory Waste Incineration System of Research Center of Thailand, 22 th International Conference on Incineration and Thermal Treatment Technology, Orlando,USA, Laboratory Waste Management at Research Center of Thailand, 18 th International Conference of Solid Waste Treatment & Technology, Widener University, Philadelphia, USA, C.V. of Dr. Somrat Kerdsuwan 3/7

4 11. Utilization of Fuel Briquette Derived from Mixing Fat Oil and Greased with Sawdust, 95 th Annual Conference of Air & Waste Management Association, Baltimore, Maryland, U.S.A., June 23 27, Optimization of Operating Conditions of A Compacted Used-Oil Incinerator, 21 st International Conference on Incineration and Thermal Treatment Technology, New Orleans, Louisiana, U.S.A., May 13 17, Correlation Between Excess Oxygen Level and Secondary Combustion Chamber Temperature on the Efficiency of Real Infectious Waste in a Controlled-Air Incinerator, Fourth International Symposium on High Temperature Air Combustion and Gasification, Rome, Italy, Nov 26 30, Simulation of Combine Cycle Cogeneration Powerplant, 6 th World Chemical Congress, Melbourne, Australia, September Optimization of The Operating Conditions of Infectious Waste Incineration in a Controlled-Air Incinerator: Effects of Primary Chamber Temperature on The Combustion Efficiency, 94 th Annual Conference of Air & Waste Management Association, Orlando, Florida, USA, June Combustion Study of the Incineration of Major Components of Infectious Waste in a Controlled-Air Incinerator : The influence of Bed Temperature and Feed Rate on the Evolution of Temperature and Gaseous Emission, International Conference on Incineration and Thermal Treatment Technology, Philadelphia, PA., USA, May On the Performance Testing of the 50 kg/hr Prototype Controlled-Air Incinerator, 16 th International Conference of Solid Waste Treatment & Technology, Journal of Solid Waste Treatment and Technology, Philadelphia, USA, December Experience of Hospital Waste Incineration in Thailand, ISWA Symposium in Solid Waste Management, Hong Kong Waste Management Association, Hong Kong, October Design of 50 kg/hr Hospital Waste Incinerator, 93 rd Conference of Air & Waste Management Association, Salt Lake City, Utah, USA, June Case Study of Using Hospital Waste Incinerator in Thailand, 93 rd Conference of Air & Waste Management Association, Salt Lake City, Utah, USA, June Pyrolysis of the Major Components of Industrial Waste; Influence of the Temperatures and the Residence Times of Gases on Nitrogen Oxides Production, The Fourth Princess Chulaborn International Congress, Thailand, November, NO x Emissions of Municipal Solid Wastes Incineration : Combustion Experiments in a Counter Flow Fixed Bed Reactor and in a Rotary Kiln Incinerator, The Third Asian Pacific International Symposium on Combustion and Energy Utilization, Hong Kong Polytechnic University, Hong Kong, Incineration of Urban Waste in a rotary kiln : Optimization and Thermal Modeling of its operating conditions, European - Asean Conference on Combustion of Solids and Treatment of Products, Hua-Hin, Thailand, Etude des caracteristique de la combustion des dechets urbains dans un incinerateur rotatif : optimisation de fonctionnement et emissions de NO x, Journee international sur les flammes, Biarrtiz, France, Combustion characteristics study of urban waste incineration in a rotary kiln: optimization of its operating conditions and NO x emission, The 5 th ASEAN Conference on Energy Technology, Thailand, C.V. of Dr. Somrat Kerdsuwan 4/7

5 26. Experimental results concerning thermal parameters and pollutants emissions during combustion of wood in a rotary kiln, International Congress, Energy and the Environment, Croatia, Methode de determination des caracteristiques de combustion et du pouvoir calorifique inferieur de combustible solides heterogenes, Colloque Franco- Marocain, Marrakech,Morocco, RESEARCH WORK 1. Research and Development of High Temperature Air Combustion for Municipal Solid Waste Incinerator 2. LPG vehicle- the clean air project 3. Establishment of Center for Incinerator s Environmental Technology Verification 4. Research & Development of Infectious Waste Controlled-Air Incinerator - 50 kg/hr of waste destruction capacity, installed at Sampran Hospital kg/hr of waste destruction capacity, installed at Lung Disease Hospital 5. Research & Development of Laboratory Waste Rotary Kiln Incinerator kg/hr of waste destruction capacity, installed at National Science & Technology Development Agency (NSTDA) 6. Combustion of Infectious Waste in a Rotary Kiln Incinerator 7. Combustion of Hazardous Waste in a Rotary Kiln Incinerator 8. Combustion of Sludge Waste in a Rotary Kiln Incinerator 9. Co-firing of Liquid Waste (DMF) and Diesel Oil in a Rotary Kiln Incinerator 10. Co-firing of Municipal Waste with Lignite in a Fixed Bed Combustor 11. Co-firing of Municipal Waste with Lignite in a Fluidized Bed Combustor AWARD Innovation Award of the year 2000, Infectious Waste Incineration System, King Mongkut s Institute of Technology North Bangkok TEXT BOOK 1. Combustion & Emission Control, King Mongkut s Institute of Technology North Bangkok, 353 pp, Incineration Technology, The Waste Incineration Research Center, King Mongkut s Institute of Technology North Bangkok, 160 pp., Handbook of Operating & Maintenance of Infectious Waste Incinerator, The Waste Incinerator Research Center, King Mongkut s Institute of Technology North Bangkok, 190 pp., Powerplant Engineering, King Mongkut s Institute of Technology North Bangkok, 220 pp., Internal Combustion Engine, King Mongkut s Institute of Technology North Bangkok, 180 pp., COURSES OFFER C.V. of Dr. Somrat Kerdsuwan 5/7

6 - Automotive Engineering - Powerplant Engineering - Internal Combustion Engine - Combustion and Emission Control - Principle of Combustion - Application of Combustion - Steam Boiler & Furnace Technology - Thermodynamic PROJECT CONDUCTED (1) Research and Development of 500 kg/hr High Temperature Air Combustion for Municipal Solid Waste Incinerator - Position : Combustion Expert - Funding : National Metal and Materials Technology Center - Years : Project Values : 6,400,000 (2) Study of Waste-to-Energy from Municipal Solid Waste in Thailand - Position : Combustion Expert - Funding : Ministry of Energy - Years : Project Values : 12,000,000 (3) Research & Development of Laboratory Waste Rotary Kiln Incinerator - Position : Project Manager - Funding : National Science & Technology Development Agency (NSTDA) - Years : Project Values : 5,300,000 (4) Establishment of Center for Incinerator Environmental Technology Verification - Position : Project Manager - Funding : Thailand Research Fund (TRF) - Years : Project Values : 4,200,000 (5) Research & Development of Infectious Waste Controlled-Air Incinerator - Position : Project Manager - Funding : Pollution Control Department (MOSTE) - Years : Project Values : 3,290,000 (6) Co-Combustion of Lignite and Municipal Waste in Fluidized Bed Incinerator - Position : Researcher - Funding : National Energy Policy Office (NEPO) - Years : Project Values : 4,200,000 (7) Construction of 100 kg/hr Infectious Waste Controlled-Air Incinerator of Lung Disease Hospital at Nontaburi - Funding : Ministry of Public Health C.V. of Dr. Somrat Kerdsuwan 6/7

7 - Years : Projects Values : 2,760,000 (8) Construction of 250 kg/hr Infectious Waste Controlled-Air Incinerator of Srinakarintara Hospital at Khon Khan - Funding : Ministry of Public Health - Years : Projects Values : 3,250,000 (9) Construction of 100 kg/hr Municipal Waste Controlled-Air Incinerator of Kabinburi Industrial Estate at Prachinburi Province - Funding : Private Company - Years : Projects Values : 1,000,000 (10) Mobile Air Monitoring Unit - Funding : Eastern Thai Consulting 1992 Co.,Ltd. - Years : Project Values : 10,000,000 C.V. of Dr. Somrat Kerdsuwan 7/7