: Ferric Ammonium Sulfate, Saturated

Transcription

1 Date of issue: 09/27/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Ferric Ammonium Sulfate, Saturated : LC Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : For laboratory and manufacturing use only Details of the supplier of the safety data sheet LabChem Inc Jackson's Pointe Commerce Park Building 1000, 1010 Jackson's Pointe Court Zelienople, PA USA T F info@labchem.com Emergency telephone number Emergency number : CHEMTREC: or SECTION 2: Hazards identification 2.1. Classification of the substance or mixture GHS-US classification Skin Irrit. 2 H315 Eye Irrit. 2A H Label elements GHS-US labelling Hazard pictograms (GHS-US) : Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHS-US) 2.3. Other hazards Other hazards not contributing to the classification 2.4. Unknown acute toxicity (GHS-US) No data available GHS07 : Warning : H315 - Causes skin irritation H319 - Causes serious eye irritation : P264 - Wash exposed skin thoroughly after handling P280 - Wear protective gloves, eye protection P302+P352 - IF ON SKIN: Wash with plenty of soap and water P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P332+P313 - If skin irritation occurs: Get medical advice/attention P337+P313 - If eye irritation persists: Get medical advice/attention P362 - Take off contaminated clothing : None. SECTION 3: Composition/information on ingredients 3.1. Substances Full text of H-phrases: see section Mixture Name Product identifier % GHS-US classification Ferric Ammonium Sulfate, Dodecahydrate (CAS No) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Water (CAS No) Not classified 09/27/2013 EN (English) Page 1

2 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Assure fresh air breathing. Allow the victim to rest. : Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects, both acute and delayed Symptoms/injuries after skin contact : Causes skin irritation. Symptoms/injuries after eye contact : Causes serious eye irritation Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. Unsuitable extinguishing media : Do not use a heavy water stream Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Avoid (reject) fire-fighting water to enter environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Protective equipment : Safety glasses. Gloves. Emergency procedures : Evacuate unnecessary personnel For emergency responders Protective equipment Emergency procedures : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Keep container closed when not in use. Incompatible products : Strong oxidizers. Incompatible materials : Sources of ignition. Direct sunlight Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. : Wash contaminated clothing before reuse. Wash exposed skin thoroughly after handling. 09/27/2013 EN (English) 2/6

3 USA ACGIH ACGIH TWA (mg/m³) 1 mg/m³ 8.2. Exposure controls Appropriate engineering controls Personal protective equipment Hand protection Eye protection Skin and body protection Respiratory protection : Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Provide adequate general and local exhaust ventilation. : Avoid all unnecessary exposure. : Wear protective gloves. : Chemical goggles or safety glasses. : Wear suitable protective clothing. : Wear appropriate mask. : Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Colour : brown. Odour : None. Odour threshold ph Relative evaporation rate (butylacetate=1) Melting point Freezing point Boiling point Flash point Self ignition temperature Decomposition temperature Flammability (solid, gas) Vapour pressure Relative vapour density at 20 C Relative density Solubility : Soluble in water. Log Pow Log Kow Viscosity, kinematic Viscosity, dynamic Explosive properties :. Oxidising properties. Explosive limits 9.2. SECTION 10: Stability and reactivity Reactivity Chemical stability Stable under normal conditions Possibility of hazardous reactions Not established Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials Strong oxidizers Hazardous decomposition products Sulfur compounds. Gaseous ammonia. Nitrogen oxides. 09/27/2013 EN (English) 3/6

4 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Water ( ) LD50 oral rat Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) mg/kg : Causes skin irritation. : Causes serious eye irritation. Specific target organ toxicity (repeated exposure) Aspiration hazard Potential Adverse human health effects and symptoms Symptoms/injuries after skin contact Symptoms/injuries after eye contact : Based on available data, the classification criteria are not met. : Causes skin irritation. : Causes serious eye irritation. SECTION 12: Ecological information Toxicity Persistence and degradability Ferric Ammonium Sulfate, Saturated Persistence and degradability Not established. Persistence and degradability Biodegradability in water: no data available. Biochemical oxygen demand (BOD) Chemical oxygen demand (COD) ThOD BOD (% of ThOD) Bioaccumulative potential Ferric Ammonium Sulfate, Saturated Bioaccumulative potential Not established. Bioaccumulative potential No bioaccumulation data available Mobility in soil Other adverse effects : Avoid release to the environment. SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information In accordance with DOT UN number No dangerous good in sense of transport regulations UN proper shipping name 09/27/2013 EN (English) 4/6

5 14.3. Additional information : No supplementary information available. Overland transport Transport by sea Air transport SECTION 15: Regulatory information US Federal regulations Listed on the United States TSCA (Toxic Substances Control Act) inventory International regulations CANADA Ferric Ammonium Sulfate, Saturated WHMIS Classification Class D Division 2 Subdivision B - Toxic material causing other toxic effects Not listed on the Canadian DSL (Domestic Sustances List) inventory. WHMIS Classification Class D Division 2 Subdivision B - Toxic material causing other toxic effects EU-Regulations Classification according to Regulation (EC) No. 1272/2008 [CLP] Classification according to Directive 67/548/EEC or 1999/45/EC Not classified National regulations US State regulations SECTION 16: : None. Full text of H-phrases: see section 16: Eye Irrit. 2A Serious eye damage/eye irritation, Category 2A Skin Irrit. 2 Skin corrosion/irritation, Category H315 Causes skin irritation H319 Causes serious eye irritation NFPA health hazard NFPA fire hazard NFPA reactivity : 1 - Exposure could cause irritation but only minor residual injury even if no treatment is given. : 0 - Materials that will not burn. : 0 - Normally stable, even under fire exposure conditions, and are not reactive with water. 09/27/2013 EN (English) 5/6

6 HMIS III Rating Health Flammability Physical Personal Protection : 1 Slight Hazard - Irritation or minor reversible injury possible : 0 Minimal Hazard : 0 Minimal Hazard : B SDS US (GHS HazCom 2012) Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and LabChem Inc assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for his application. 09/27/2013 EN (English) 6/6