SAFETY DATA SHEET. 1. Identification. 2. Hazard(s) identification. 3. Composition/information on ingredients. 4. First-aid measures

Transcription

1 SAFETY DATA SHEET 1. Identification Product identifier Other means of identification Product code Gap Pad 1000HD, 1500, 2500, 1450, 1500S30, 2000S40, , 2500S20, 3000S30, 3500ULM, HC1000, A2000, A3000, HC 3.0 VO, VO Soft, VO Ultrasoft, VO Ultrasoft-Black, VO Ultrasoft-AB, VO Ultimate, HC 5.0, 1500R, With/without Adhesives AC, AAC, AC2, ACA, EAAC, TAC, TAAC, ACL Synonyms GP Recommended use Thermally Conductive Silicone Pad. Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Manufacturer/Supplier The Bergquist Company Address: West 78th Street Chanhassen, MN n-emergency calls: Contact person: Emergency telephone number Chemical Emergency Call CHEMTREC Day or Night Within USA and Canada: Outside USA and Canada: (Collect Calls Accepted) 2. Hazard(s) identification Physical hazards Health hazards OSHA defined hazards Label elements Hazard symbol Signal word Hazard statement Precautionary statement Prevention Response Storage Disposal Hazard(s) not otherwise classified (HNOC) Supplemental information ne. t applicable. t applicable. Observe good industrial hygiene practices. Wash thoroughly after handling. Store away from incompatible materials. Dispose of waste and residues in accordance with local authority requirements. This product is not hazardous according to OSHA 29 CFR requirements, therefore a hazard label does not apply. 3. Composition/information on ingredients Mixtures The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR First-aid measures Inhalation Move to fresh air. Get medical attention if symptoms occur Version #: 04 Revision date: 13-April-2016 Issue date: 20-October / 6

2 Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed General information 5. Fire-fighting measures Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire fighting equipment/instructions General fire hazards Wash skin with soap and water. Get medical attention if irritation persists after washing. Flush thoroughly with water. If irritation occurs, get medical assistance. Rinse mouth thoroughly. Get medical attention if any discomfort occurs. Under normal conditions of intended use, this material does not pose a risk to health. Treat symptomatically. Get medical attention if any discomfort develops. Use fire-extinguishing media appropriate for surrounding materials. ne. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Selection of respiratory protection for firefighting: follow the general fire precautions indicated in the workplace. Move containers from fire area if you can do so without risk. This product is not flammable. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Environmental precautions Avoid contact with skin and eyes. Sweep up or gather material and place in appropriate container for disposal. For waste disposal, see Section 13 of the SDS. Environmental manager must be informed of all major spillages. 7. Handling and storage Precautions for safe handling Conditions for safe storage, including any incompatibilities Provide adequate ventilation. Avoid inhalation of dust and contact with skin and eyes. Observe good industrial hygiene practices. Wear appropriate personal protective equipment (See Section 8). Store in closed original container in a dry place. Store away from incompatible materials. 8. Exposure controls/personal protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR ) Components Aluminum oxide (CAS ) US. ACGIH Threshold Limit Values Type Value Form PEL 5 mg/m3 Respirable fraction. 15 mg/m3 Total dust. Components Aluminium nitride (CAS ) Aluminum hydroxide (CAS ) Aluminum oxide (CAS ) Biological limit values Exposure guidelines Appropriate engineering controls Type Value Form TWA 1 mg/m3 Respirable fraction. TWA 1 mg/m3 Respirable fraction. TWA 1 mg/m3 Respirable fraction. biological exposure limits noted for the ingredient(s). Follow standard monitoring procedures. Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits Version #: 04 Revision date: 13-April-2016 Issue date: 20-October / 6

3 Individual protection measures, such as personal protective equipment Eye/face protection Risk of contact: Wear approved safety goggles. Skin protection Hand protection Use suitable protective gloves if risk of skin contact. Suitable gloves can be recommended by the glove supplier. Other If prolonged or repeated contact is likely, chemical resistant clothing is recommended. Respiratory protection In case of inadequate ventilation, use respiratory protection. Thermal hazards Wear appropriate thermal protective clothing, when necessary. General hygiene considerations 9. Physical and chemical properties Appearance Solid. Physical state Solid. Form Solid. Color Various. Odor Slight. Odor threshold ph Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) Flammability limit - upper (%) Explosive limit - lower (%) Explosive limit - upper (%) Vapor pressure Vapor density Solubility(ies) Solubility (water) Insoluble in water. Partition coefficient (n-octanol/water) Auto-ignition temperature Decomposition temperature t available. Viscosity Other information Bulk density t available. Density (25 C) Explosive properties t explosive. Oxidizing properties t oxidizing. VOC (Weight %) t available. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Discard contaminated clothing and footwear that cannot be cleaned. 10. Stability and reactivity Reactivity Chemical stability The product is stable and non-reactive under normal conditions of use, storage and transport. Material is stable under normal conditions Version #: 04 Revision date: 13-April-2016 Issue date: 20-October / 6

4 Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products Hazardous polymerization does not occur. Contact with incompatible materials. Strong oxidizing agents. ne. 11. Toxicological information Information on likely routes of exposure Inhalation Elevated temperatures or mechanical action may form dust and fumes which may be irritating to the mucous membranes and respiratory tract. Skin contact Prolonged skin contact may cause temporary irritation. Eye contact Elevated temperatures or mechanical action may form dust and fumes which may be irritating to the eye. Ingestion t likely, due to the form of the product. Symptoms related to the Under normal conditions of intended use, this material does not pose a risk to health. physical, chemical and toxicological characteristics Information on toxicological effects Acute toxicity Under normal conditions of intended use, this material does not pose a risk to health. Skin corrosion/irritation Serious eye damage/eye irritation Respiratory or skin sensitization Respiratory sensitization Skin sensitization Germ cell mutagenicity Carcinogenicity IARC Monographs. Overall Evaluation of Carcinogenicity NTP Report on Carcinogens OSHA Specifically Regulated Substances (29 CFR ) Reproductive toxicity Specific target organ toxicity - single exposure Specific target organ toxicity - repeated exposure Aspiration hazard Chronic effects Further information 12. Ecological information Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects The product is not classified as environmentally hazardous. data available. data available. The product is insoluble in water. 13. Disposal considerations Disposal instructions Dispose of contents/container in accordance with local/regional/national/international regulations. Local disposal regulations Dispose of in accordance with local regulations Version #: 04 Revision date: 13-April-2016 Issue date: 20-October / 6

5 Hazardous waste code Waste from residues / unused products Contaminated packaging Waste codes should be assigned by the user based on the application for which the product was used. Disposal recommendations are based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal. Since emptied containers retain product residue, follow label warnings even after container is emptied. 14. Transport information DOT t regulated as dangerous goods. IATA t regulated as dangerous goods. IMDG t regulated as dangerous goods. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information t applicable. US federal regulations This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR All components are on the U.S. EPA TSCA Inventory List. TSCA Section 12(b) Export tification (40 CFR 707, Subpt. D) OSHA Specifically Regulated Substances (29 CFR ) CERCLA Hazardous Substance List (40 CFR 302.4) Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories Immediate Hazard - Delayed Hazard - Fire Hazard - Pressure Hazard - Reactivity Hazard - SARA 302 Extremely hazardous substance SARA 311/312 Hazardous chemical SARA 313 (TRI reporting) Chemical name CAS number % by wt. Aluminum oxide Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR ) Safe Drinking Water Act (SDWA) US state regulations WARNING: This product contains a chemical known to the State of California to cause cancer. US. Massachusetts RTK - Substance List US. New Jersey Worker and Community Right-to-Know Act US. Pennsylvania Worker and Community Right-to-Know Law US. Rhode Island RTK Version #: 04 Revision date: 13-April-2016 Issue date: 20-October / 6

6 US. California Proposition 65 US - California Proposition 65 - Carcinogens & Reproductive Toxicity (CRT): Listed substance Carbon black (CAS ) International Inventories Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Domestic Substances List (DSL) Canada n-domestic Substances List (NDSL) China Inventory of Existing Chemical Substances in China (IECSC) Europe European Inventory of Existing Commercial Chemical Substances (EINECS) Europe European List of tified Chemical Substances (ELINCS) Japan Inventory of Existing and New Chemical Substances (ENCS) Korea Existing Chemicals List (ECL) New Zealand New Zealand Inventory Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "" indicates this product complies with the inventory requirements administered by the governing country(s). A "" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision Issue date 20-October-2014 Revision date 13-April-2016 Version # 04 NFPA ratings References Disclaimer HSDB - Hazardous Substances Data Bank IARC Monographs. Overall Evaluation of Carcinogenicity National Toxicology Program (NTP) Report on Carcinogens The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation and its affiliates ( Henkel ) does not assume responsibility for any results obtained by persons over whose methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any Henkel s products. In light of the foregoing, Henkel specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel products. Henkel further disclaims any liability for consequential or incidental damages of any kind, including lost profits. The information in the sheet was written based on the best knowledge and experience currently available Version #: 04 Revision date: 13-April-2016 Issue date: 20-October / 6