Dutiability of Site related Activities

Size: px
Start display at page:

Download "Dutiability of Site related Activities"

Transcription

1 Dutiability of Site related Activities Background cases

2 Parts required for manufacture of paper making Machine

3 Motor used for rolling Rollers Raw Pulp extractor Belts Paper making and designing plate Paper Pulvarizer Waste ejector Misc. parts

4 The paper making machine

5 Departments contention Assembly of a paper making machine and its erection at site mainly from bought out components and by fabricating the rest of the parts at site, amounts to manufacture.

6 Assessee s contention The paper making machine after assembly at site is an immovable good. As immovable goods are not covered under excise, the said paper making machine does not amount to manufacture

7 Sirpur Paper Mills Ltd. v. CCE 1998 Decision by supreme court: The machine is good" under excise. It was only fixed to the ground for the purpose of wobble-free operation and the attachment was not critical to its functioning. The court opined that even when unattached to the ground, the paper making machine retained its characteristics and the embedding for better functioning does not make it immovable property. Further the court stated that paper making machine is not immovable property as something attached to the earth like a building or tree.

8 + Steam Turbine Alternator = Turbo alternator

9 What is Turbo Alternator An alternator is an electromechanical device that converts mechanical energy to electrical energy in the form of alternating current. Most alternators use a rotating magnetic field but linear alternators are occasionally used. In principle, any AC electrical generator can be called an alternator, but usually the word refers to small rotating machines driven by automotive and other internal combustion engines. Alternators in power stations driven by steam turbines are called turboalternators.

10 Triveni Engineering & Industries Ltd. v. CCE 2000 Supreme courts decision: while fixing of steam turbine, alternator and coupling them to form a turbo alternator amounts to a manufacturing process, the resultant property being immovable the same cannot be brought to excise.

11 Quality Steel Tubes P. Ltd. V. CCE (1995) Tube Mill Welding Head

12 Quality Steel Tubes P. Ltd. V. CCE (1995) Supreme court held that tube mill and welding head erected and installed are not capable of being brought to the market for being sold. Therefore these are not goods under excise Goods erected and installed in the premises and embedded to earth cease to be goods and cannot held to be excisable goods.

13

14 Cement Plant V. Component in cement plant Plant, as such being immovable. So not goods under excise Components like kiln are dutiable

15 Air conditioning plant V. Air conditioning unit Plant as a whole cannot be considered as good, but each component is dutiable. Air conditioning units are considered as goods and are dutiable

16 Permanent V. Temporary lifts Lifts permanently fitted into civil structure are not goods Lifts temporarily installed at construction site are goods

17 Fuel storage tanks Tanks, though not embedded in the earth, are erected at site, stage by stage, and after completion they cannot be physically moved. On sale/disposal they have necessarily to be dismantled and sold as metal sheets/scrap. It is not possible to assemble the tank all over again. Such tanks are therefore not moveable and cannot be considered as excisable goods CCE Chandigarh V. Bhagwanpura Sugar Mills

18 Larsen & Toubro Limited v. UOI 2009 (Bom. HC) Whether the fabrication, assembly and erection of waste water treatment plant amounts to manufacture?

19 Engaged in the business of fabrication and erection of structures of various types on contract basis contract for fabrication, assembly and erection of waste water treatment plant. Activities Involved Procurement, supply, fabrication of various components Making of carbon steel tanks Various platforms walkways and ladders are fabricated at site by process of rolling, welding, grinding etc. Civil construction is also done Water treatment plant which will be an immovable structure

20 Department issued a notice to the assessee alleging that assessee had fabricated/manufactured the waste water treatment plant in the premises of BPCL and The waste water treatment plant falls under Chapter Heading No on which excise duty was payable. Plant came into existence in unassembled form as per the drawings and designs approved by the BPCL before the same was installed and assembled to the ground with civil work. Thus excise duty was payable on the value of the plant excluding the value of the civil work The plant cannot function as such until it is wholly built including the civil construction.

21 Mere bringing of the duty paid parts in an unassembled form at one place, i.e. at the site does not amount to manufacture of a plant. Unless an excisable movable product (say a plant) comes into existence by assembly of such parts. In the present case, as the petitioner had stated that the waste water treatment plant did not come into existence unless all the parts were put together and embedded in the civil work. Waste water treatment plant did not become a plant until the process which included the civil work, was completed. Thus, the Court held that no commercial movable property came into existence until the assembling was completed by embedding different parts in the civil works.

22 CCE v. Solid & Correct Engineering Works and Ors 2010 (SC) Whether the machine which is not assimilated in permanent structure would be considered to be moveable so as to be dutiable under the Central Excise Act?

23 Solid & Engineering works, a company situated in Ahmedabad, engaged in manufacture of parts and components for road and civil construction machinery and equipments like Asphalt Drum/Hot Mix Plants and Asphalt Paver Machine etc. Asphalt Drum Hot mix plant Asphalt paver machine

24 Soild & Correct Engg. Works Supplies components Soildmec Equipments Ltd. (Marketing company) manufactures Asphalt Drum/ Hot mix plants at the sites of purchasers of such plants

25 CCE v. Solid & Correct Engineering Works and Ors 2010 (SC) Department s Contention: Department issued the show cause notice alleged that the process of assembly of the parts and components at the site provided by the customer was tantamount to manufacture of Asphalt Batch Mix, Drum Mix/Hot Mix plants as a distinct product with a new name, quality, usage and character emerged out of the said process. Thus Asphalt Drum/Hot Mix Plants became exigible to Central Excise duty. Assessee s Contention: Such plants (Asphalt Drum/Hot Mix) have to be permanently embedded in earth as it required to be fixed to a foundation that is 1 and ½ ft. deep for the sake of stability of the plant which causes heavy vibrations while in operation. Thus, the setting up of the plant is result into immovable property and not subject to excise duty.

26 Decision of supreme court: The expression attached to the earth has three distinct dimensions, viz. (a) Rooted in the earth as in the case of trees and shrubs (b) Imbedded in the earth as in the case of walls or buildings or (c) Attached permanently for the purpose of working (If removed the machine wont work) Attachment of the plant in question with the help of nuts and bolts to a foundation not more than 1½ feet deep intended to provide stability to the working of the plant and prevent vibration/wobble free operation does not qualify as attached to the earth under any one of the three clauses extracted above. Hence, the Supreme Court held that the plants in question were not immovable property so as to be immune from the levy of excise duty. Consequently, duty would be levied on them.

Cement mill Cracks in the mill ends

Cement mill Cracks in the mill ends Short Paper on an interesting case of damage Machinery Insurance Prepared for IMIA Cement mill Cracks in the mill ends This case of damage was investigated to decide if repair-welding is a sufficient solution

More information

Star Trace Pvt. Ltd., manufacturer of magnetic equipment, accelerate efficiency, reduces your cost and increases your profits without compromising on

Star Trace Pvt. Ltd., manufacturer of magnetic equipment, accelerate efficiency, reduces your cost and increases your profits without compromising on Star Trace Pvt. Ltd., manufacturer of magnetic equipment, accelerate efficiency, reduces your cost and increases your profits without compromising on quality. We make products like magnets, magnetic lifters,

More information

BEARINGS FOR HEAVY INDUSTRY

BEARINGS FOR HEAVY INDUSTRY BEARINGS FOR HEAVY INDUSTRY PROFESSIONAL APPROACH TO WORLD INDUSTRY BEARINGS FOR STEEL INDUSTRY The working conditions of bearings in steel industry are characterized by high temperatures and dust and

More information

INTRODUCTION WORK FORCE INFORMATION

INTRODUCTION WORK FORCE INFORMATION INTRODUCTION We M/s Laxmi Engineers are leading company from Ahmadabad specialized Scaffolding Services providing, Foundation bolts manufacturing & Industrial Fabrication work. We are undertaking the Many

More information

CHAPTER 162 HEAVY INDUSTRIAL (IH) ZONING DISTRICT Use Department of Environmental Quality Approval

CHAPTER 162 HEAVY INDUSTRIAL (IH) ZONING DISTRICT Use Department of Environmental Quality Approval CHAPTER 162 HEAVY INDUSTRIAL (IH) ZONING DISTRICT 162.010. Use 162.020. Department of Environmental Quality Approval 162.030. Conditional Uses C:\Documents and Settings\friesel\Local Settings\Temp\Heavy

More information

INDUSTRIAL ACCESSORIES COMPANY

INDUSTRIAL ACCESSORIES COMPANY INDUSTRIAL ACCESSORIES COMPANY Biofuels Energy Centers Clean Alternative Power from Biomass PP020 10/2/09 1 IAC Products and Systems OEM Baghouse and Pneumatic Conveyor Supplier Technology for SOx, HCl

More information

+91-8071684092 Narayan Industries http://www.narayanindustries.org/ We are Manufacturing, Supplying and Exporting Materials Handling Equipment & Systems, Conveying Systems, Impact Idler etc. in specific

More information

View of Promac s Engineering Works, Bangalore, India

View of Promac s Engineering Works, Bangalore, India Promac Engineering Industries Ltd, was established in the year 1972 and its modern and full fledged manufacturing works is located in Bangalore, India. Promac has successfully executed modern cement plants

More information

SECTION METAL FABRICATIONS FOR STEAM UTILITY DISTRIBUTION

SECTION METAL FABRICATIONS FOR STEAM UTILITY DISTRIBUTION PAGE 055015-1 SECTION 055015 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,

More information

Chapter Four. Process Selection

Chapter Four. Process Selection Chapter Four Process Selection Reading : Reference book M.F. Ashby- Chapter 7 There is an interaction between material, shape and process Function Materials properties and shape limit the choice of process.

More information

SECTION 2 DIVISION 05 METALS

SECTION 2 DIVISION 05 METALS SECTION 2 DIVISION 05 METALS DIVISION 5 - METALS Note: This is a guide for Designers only. Contents shall not be used in lieu of specifications as part of the Designer s Contract Documents. GENERAL DESIGN:

More information

CHAPTER 28. Solid-State Welding Processes. Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 28-1

CHAPTER 28. Solid-State Welding Processes. Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 28-1 CHAPTER 28 Solid-State Welding Processes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 28-1 Roll Bonding Figure 28.1 Schematic illustration of the roll bonding, or cladding, process

More information

SOLUTIONS, AS SOLID AS STEEL

SOLUTIONS, AS SOLID AS STEEL AN ISO 9001-2008 CERTIFIED COMPANY Al Qaser Steel Fabrication Solutions SOLUTIONS, AS SOLID AS STEEL MILD STEEL FABRICATION STAINLESS STEEL FABRICATION ALUMINIUM FABRICATION About Us Al Qaser Fabrication

More information

Chapter 31. Solid-State Welding Processes

Chapter 31. Solid-State Welding Processes Chapter 31 Solid-State Welding Processes Roll Bonding Figure 31.1 Schematic illustration of the roll bonding or cladding process. Ultrasonic Welding Figure 31.2 (a) Components of an ultrasonic welding

More information

Curing Racks for the Concrete Block Industry.

Curing Racks for the Concrete Block Industry. always the better choice Curing Racks for the Concrete Block Industry. Durable. Flexible. Good. www.curingracks.com Elifraf Curing Racks The Company Since more than two decades, ARTEK AGIR YÜK RAFLARI

More information

TCN 02, Dated: WITH REFERENCE TO ABOVE FOLLOWING CHANGES MAY PLEASE BE NOTED AND COMPLIED WHILE SUBMITTING THE OFFER FOR THE SUBJECT JOB:

TCN 02, Dated: WITH REFERENCE TO ABOVE FOLLOWING CHANGES MAY PLEASE BE NOTED AND COMPLIED WHILE SUBMITTING THE OFFER FOR THE SUBJECT JOB: Bharat Heavy Electricals Limited (A Government of India Undertaking) Power Sector Eastern Region Plot No. 9/, Block-DJ, Salt Lake City, Kolkata 700 09 (INDIA) Phone no. 033-232 69 Fax : 033-232 960 Web

More information

SECTION STRUCTURAL METAL FRAMING

SECTION STRUCTURAL METAL FRAMING SECTION 05100 STRUCTURAL METAL FRAMING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Structural steel framing including lintels, shelf angles, bearing plates, anchor bolts and other items as shown on

More information

COST CONCEPTS IN DECISION MAKING

COST CONCEPTS IN DECISION MAKING CHAPTER 2 COST CONCEPTS IN DECISION MAKING BASIC CONCEPTS & FORMULAE Basic Concepts 1. Relevant cost in decision making process: Costs which are relevant for a particular business option, which are not

More information

Ability Fabricators Inc.

Ability Fabricators Inc. Ability Fabricators Inc. Your Partner For Custom Stainless Steel Fabrication & Process Equipment Tel: 1-905-761-1401 1-877-428-4866 Fax: 1-905-761-0649 Email: sales@abilityfab.com 187 Romina Drive, Concord

More information

Manufacturing Technology

Manufacturing Technology Manufacturing Technology What is manufacturing technology? A manufacturing technology is a system of people, machines, and materials that mass-produce goods for the market. Automation is manufacturing

More information

Shree Balaad Handling Works

Shree Balaad Handling Works +91-8048762664 Shree Balaad Handling Works https://www.hydraulicliftingequipment.com/ We are into manufacturing, supplying and exporting an array of Lifting Equipment, Pallet Trucks, Hydraulic Stacker

More information

Company Profile. Chemical & Cement Industry. Petroleum, Oil & Gas. Environmental Technologies. Power & Energy

Company Profile. Chemical & Cement Industry. Petroleum, Oil & Gas. Environmental Technologies. Power & Energy Company Profile Petroleum, Oil & Gas Power & Energy Chemical & Cement Industry Environmental Technologies ABOUT US Mr. Hakan YILDIRIM Mr. Berk DAL DEHA TECH Group of companies has taken the first step

More information

DIVISION 5 METALS COLD FORMED METAL FRAMING Structural Metal Stud Framing

DIVISION 5 METALS COLD FORMED METAL FRAMING Structural Metal Stud Framing 05 40 00 COLD FORMED METAL FRAMING 05 41 00 Structural Metal Stud Framing 05 50 00 METAL FABRICATIONS 05 51 00 Metal Stairs 05 51 13 Metal Pan Stairs 05 52 00 Metal Railings 05 52 13 Pipe and Tube Railings

More information

张家港市张运机械制造有限公司 Zhangjiagang City Zhangyun Machinery Manufacturing Co.,Ltd. ZY76 (Enlarged to 114) HF Welded Pipe Mill Solution

张家港市张运机械制造有限公司 Zhangjiagang City Zhangyun Machinery Manufacturing Co.,Ltd. ZY76 (Enlarged to 114) HF Welded Pipe Mill Solution ZY76 (Enlarged to 114) HF Welded Pipe Mill Solution (Φ25.4~Φ114mm x 1.2~4.0mm x 4~10m x 30~80 m/min) To: Zehtabchiyan From: 1 / 11 I Summary 张家港市张运机械制造有限公司 This high-frequency welding pipe mill is specialized

More information

PRECISION INDUSTRIAL CONTRACTORS, INC

PRECISION INDUSTRIAL CONTRACTORS, INC PRECISION INDUSTRIAL CONTRACTORS, INC Committed to maintaining a Leadership Role in the Industrial Contracting Field by providing customers with Unparalleled Service and Safe, Efficient, Economical Solutions

More information

C. Miscellaneous Metal Fabricators are specified elsewhere in Division 5.

C. Miscellaneous Metal Fabricators are specified elsewhere in Division 5. SECTION 05 1200 - STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.01 SUMMARY A. Extent of structural steel work is shown on drawings, including schedules, notes and details to show size and location of members,

More information

Signage Code. H101.2 Signs exempt from permits. The following signs are exempt from the requirements to obtain a permit before erection:

Signage Code. H101.2 Signs exempt from permits. The following signs are exempt from the requirements to obtain a permit before erection: Signage Code ICC Code: Appendix H: Signs SECTION H101 GENERAL H101.1 General. A sign shall not be erected in a manner that would confuse or obstruct the view of or interfere with exit signs required by

More information

.1 American Institute of Steel Construction (AISC) Specifications for Steel Buildings AISC

.1 American Institute of Steel Construction (AISC) Specifications for Steel Buildings AISC 05 12 00 STRUCTURAL STEEL FRAMING Page 1 of 3 1 General 1.1 SECTION INCLUDES.1 Structural steel framing and support members 1.2 RELATED SECTIONS.1 Section 05 50 00 Metal Fabrications 1.3 REFERENCES.1 American

More information

Product Evaluation Report

Product Evaluation Report Product Evaluation Report PER-09040 Page 1 of 5 This Document Published By: Initial Listing Re-Approved 5/12/2010 Progressive Engineering Inc. 58640 State Road 15 Goshen, Indiana 46528 574-533-0337 www.p-e-i.com

More information

STEAM TURBINE-GENERATOR & AUXILLIARY SYSTEMS Presentation by: RANA NASIR ALI General Manager, Power Plants Projects, at PITCO November 02, 2017

STEAM TURBINE-GENERATOR & AUXILLIARY SYSTEMS Presentation by: RANA NASIR ALI General Manager, Power Plants Projects, at PITCO November 02, 2017 STEAM TURBINE-GENERATOR & AUXILLIARY SYSTEMS Presentation by: RANA NASIR ALI General Manager, Power Plants Projects, at PITCO November 02, 2017 CO-GENERTATION POWER PLANT CONCEPT For dimensioning, design

More information

MODIFICATIONS IN COAL PULVERISERS TO INCREASE AVAILABILITY OF COAL FIRED BOILERS (3 x 35 TPH - RUSSIAN MAKE) - A Case Study

MODIFICATIONS IN COAL PULVERISERS TO INCREASE AVAILABILITY OF COAL FIRED BOILERS (3 x 35 TPH - RUSSIAN MAKE) - A Case Study MODIFICATIONS IN COAL PULVERISERS TO INCREASE AVAILABILITY OF COAL FIRED BOILERS (3 x 35 TPH - RUSSIAN MAKE) - A Case Study Tej Bahadur Additional General Manager Pollution Control Research Institute BHEL,

More information

Insulating Cellular Concrete Steel Joists Painting. A. America Society for Testing and Materials (ASTM):

Insulating Cellular Concrete Steel Joists Painting. A. America Society for Testing and Materials (ASTM): SECTION 05120 STRUCTURAL STEEL PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03342 - Insulating Cellular Concrete. 2. 05210 - Steel Joists. 3. 09900 - Painting. 1.02 REFERENCES A. America Society

More information

HEAVY MOVABLE STRUCTURES, INC. THIRTEENTH BIENNIAL SYMPOSIUM

HEAVY MOVABLE STRUCTURES, INC. THIRTEENTH BIENNIAL SYMPOSIUM THIRTEENTH BIENNIAL SYMPOSIUM October 25-28, 2010 Enclosed Drives for Movable Bridges Specification Consistency John G Proven, P.E. Nuttall Gear CARIBE ROYALE HOTEL ORLANDO, FLORIDA INTRODUCTION As a manufacturer

More information

K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.

K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011. DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:

More information

SUGGESTED SPECIFICATIONS Pump Frames through 64132

SUGGESTED SPECIFICATIONS Pump Frames through 64132 TYPE HBB - HORIZONTAL SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames 44081 through 64132 GENERAL Furnish and install Horizontal Flexible Coupled Dry Pit Pumping Units complete with all accessories and appurtenances

More information

SECTION METAL STAIRS

SECTION METAL STAIRS SECTION 05 51 00 METAL STAIRS PART 1 GENERAL 1.1 SUMMARY A. Section includes steel stair frame of structural sections, with closed risers; pan to receive concrete fill stair treads and landings; integral

More information

RECOMMANDATIONS TO MAINTAIN TOWER CRANES IN SAFE CONDITIONS

RECOMMANDATIONS TO MAINTAIN TOWER CRANES IN SAFE CONDITIONS FEDERATION EUROPEENNE DE LA MANUTENTION SECTION I HEAVY LIFTING APPLIANCES F.E.M. 1.007 November 2003 RECOMMANDATIONS TO MAINTAIN TOWER CRANES IN SAFE CONDITIONS This edition is also available in French

More information

Municipal solid / hazardous waste

Municipal solid / hazardous waste (10) ENVIRONMENTAL MANAGEMENT PLAN The mitigation measures for reducing the adverse environmental impacts together constitute a part of EMP. The environmental issues, which need management, plan for the

More information

FACULTY OF ENGINEERING AND THE BUILT ENVIRONMENT. Department of Chemical, Metallurgical and Materials Engineering Metallurgical Engineering

FACULTY OF ENGINEERING AND THE BUILT ENVIRONMENT. Department of Chemical, Metallurgical and Materials Engineering Metallurgical Engineering FACULTY OF ENGINEERING AND THE BUILT ENVIRONMENT Department of Chemical, Metallurgical and Materials Engineering Metallurgical Engineering Particle size reduction using simple Comminution Plant Prototype

More information

TRI-M Mecano Metal de Moçambique

TRI-M Mecano Metal de Moçambique Our Vision is to have a competitive advantage through our combined management and work force. Our Mission is to deliver quality service agreements, engineering services and labour on a continuous basis,

More information

EXPERTS IN TANK CONSTRUCTION

EXPERTS IN TANK CONSTRUCTION EXPERTS IN TANK CONSTRUCTION EXPERTS IN TANK CONSTRUCTION Upgrade Storage is a construction company and turnkey installer of industrial, large size tanks and silos used for the handling, processing and

More information

SPECIAL INSPECTION AND OBSERVATION PROGRAM CITY OF CONCORD BUILDING DIVISION. Project Address:

SPECIAL INSPECTION AND OBSERVATION PROGRAM CITY OF CONCORD BUILDING DIVISION. Project Address: SPECIAL INSPECTION AND OBSERVATION PROGRAM CITY OF CONCORD BUILDING DIVISION Permit Application #: Project Address: Purpose: To meet the requirements of CBC Section 1704.3 this form may be used as a statement

More information

CATALOGUE Double Vertical Ring High Magnetic Separator Series DLS

CATALOGUE Double Vertical Ring High Magnetic Separator Series DLS CATALOGUE Double Vertical Ring High Magnetic Separator Series DLS For processing fine, feebly magnetic minerals, such as hematite, limonite, ilmenite, wolframite, tantalumniobium, and etc. For purifying

More information

Introduction to manufacturing

Introduction to manufacturing Corso di Studi di Fabbricazione 1 Introduction to manufacturing 1 MANUFACTURING - TECHNOLOGICALLY IMPORTANT Technology provides the products that help our society and its members to live better What do

More information

STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS

STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS SOUTHEASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY 1234 MARKET STREET, PHILADELPHIA, PA 19107 STANDARD SPECIFICATION FOR ALUMINUM FRAMING FOR RAILROAD PASSENGER SHELTERS REVISION DATE SPECIFICATION # F-S-304_

More information

American Railway Engineering & Maintenance-of-Way Association Letter Ballot

American Railway Engineering & Maintenance-of-Way Association Letter Ballot Assignment: At the January 2017 meeting in Ft. Myers, FL ballot 15-17-01 was proposed by the subcommittee and general committee to combine Sections 4.11 and 4.13 into a single Section and add Commentary.

More information

SECTION STRUCTURAL STEEL

SECTION STRUCTURAL STEEL SECTION 051200 STRUCTURAL STEEL PART 1 GENERAL 1.01 SECTION INCLUDES A. Structural steel framing members and support members. B. Base plates, shear stud connectors. C. Grouting under base plates. 1.02

More information

WIRE DRAWING. Profile No.: 12 NIC Code: INTRODUCTION: 2. PRODUCT & ITS APPLICATION:

WIRE DRAWING. Profile No.: 12 NIC Code: INTRODUCTION: 2. PRODUCT & ITS APPLICATION: Profile No.: 12 NIC Code: 24108 WIRE DRAWING 1. INTRODUCTION: Drawing of wire from metal rod is a metal working process that reduces the cross-section and elongates in to wire. During wire drawing the

More information

N-SERIES: NTH3500 SPECIFICATIONS Hollow Metal Sliding Door System

N-SERIES: NTH3500 SPECIFICATIONS Hollow Metal Sliding Door System Version 5.22.13 N-SERIES: NTH3500 SPECIFICATIONS Hollow Metal Sliding Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER FOR ADDITONAL

More information

1.6S PP SPUNBOND NONWOVEN PRODUCTION LINE. Ⅰ. Application

1.6S PP SPUNBOND NONWOVEN PRODUCTION LINE. Ⅰ. Application 1.6S PP SPUNBOND NONWOVEN PRODUCTION LINE Ⅰ. Application This equipment is suitable for the production of spunbond nonwovens with a variety of colors and different properties using PP chips as main material

More information

Numerous road and bridge construction pay items are measured by weight -- usually tons or pounds.

Numerous road and bridge construction pay items are measured by weight -- usually tons or pounds. INTRODUCTION TO WEIGHT MEASUREMENTS Numerous road and bridge construction pay items are measured by weight -- usually tons or pounds. METHODS Several different techniques can be employed for weight measurement.

More information

Khodiyar Industrial Corporation

Khodiyar Industrial Corporation RAJKOT - GUJARAT 9-Navarangpara, Opp-Poonam Foundry, Rajkot-360004, Gujarat (INDIA) Phone: +91-281-2388697, Fax: +91-281-2388697 Email: info@kic.co.in, sales@kic.co.in www.kicdieselengineparts.com 1 Introduction

More information

Course Description EMME 1

Course Description EMME 1 Course Description 01211211 Introduction to CAD/CAM 3(2 3 6) CAD/CAM systems for production engineering, hardwares and softwares for CAD/CAM systems, wireframe, surface and solid design, three dimension

More information

C H R I S K O Z I C K I F E E C O I N T E R N A T I O N A L

C H R I S K O Z I C K I F E E C O I N T E R N A T I O N A L AGGLOMERATING BULK SOLIDS: FROM IDEA TO PRODUCTION C H R I S K O Z I C K I F E E C O I N T E R N A T I O N A L A G G L O M E R A T I O N AGGLOMERATION WHY AGGLOMERATE? RAW MATERIAL BENEFITS Simplified

More information

REGULATION OF THE MINISTER OF COMMUNITY, ABORIGINAL AND WOMEN S SERVICES. Safety Standards Act M 62

REGULATION OF THE MINISTER OF COMMUNITY, ABORIGINAL AND WOMEN S SERVICES. Safety Standards Act M 62 PROVINCE OF BRITISH COLUMBIA REGULATION OF THE MINISTER OF COMMUNITY, ABORIGINAL AND WOMEN S SERVICES Safety Standards Act M 62 I, Murray Coell, Minister of Community, Aboriginal and Women s Services,

More information

RELIABLE WOOD CHIPPING PTO PRODUCT CATALOGUE. Reliable machines designed for demanding users

RELIABLE WOOD CHIPPING PTO PRODUCT CATALOGUE. Reliable machines designed for demanding users RELIABLE WOOD CHIPPING PTO PRODUCT CATALOGUE Reliable machines designed for demanding users RELIABLE WOOD CHIPPING PERFECT RESULTS HIGH EFFICIENCY. DANISH QUALITY. TP Wood Chippers are designed and manufactured

More information

Divine Engineering Service

Divine Engineering Service Divine Engineering Service An ISO 9001:2015 Certified Company Company Overview Divine Engineering Service is one of the leading metal fabricator specializing in engineering works in the field of unlimited

More information

Steam Turbine Vibration Resonance of Pedestal, Vibration Investigation with Countermeasures in Singapore. Kyoichi Ikeno

Steam Turbine Vibration Resonance of Pedestal, Vibration Investigation with Countermeasures in Singapore. Kyoichi Ikeno Steam Turbine Vibration Resonance of Pedestal, Vibration Investigation with Countermeasures in Singapore Kyoichi Ikeno Presenter/Author bios Makoto Katagake is Senior Mechanical Engineer of the Turbine

More information

Causes for residual magnetism on parts. Residual magnetism of steel products:

Causes for residual magnetism on parts. Residual magnetism of steel products: Causes for residual magnetism on parts Residual magnetism of steel products: Physical background, causes, existing field configurations, hard magnetic spots, recurrence of magnetism, concentration effects

More information

INDUSTRIAL ACCESSORIES COMPANY

INDUSTRIAL ACCESSORIES COMPANY INDUSTRIAL ACCESSORIES COMPANY Industrial Accessories Company is an industrial design/build and original equipment manufacturer of baghouses, flue gas desulfurization, heavy metal mitigating sorbent injection

More information

40 CFR Part 63, Subpart XXXXXX, (6X Area Source NESHAP)

40 CFR Part 63, Subpart XXXXXX, (6X Area Source NESHAP) 40 CFR Part 63, Subpart XXXXXX, (6X Area Source NESHAP) http://www.iowadnr.gov/air/prof/neshap/ Background of the 6X rule Applicability Facilities covered by rule SIC/NAICS codes Examples of types of facilities

More information

DESIGN CRITERIA. Allowable Stress Design (ASD) AISC-1999.

DESIGN CRITERIA. Allowable Stress Design (ASD) AISC-1999. DESIGN CRITERIA 1. INTRODUCTION This appendix summarizes the codes, standards, criteria, and practices that are generally used in the design and construction structural engineering system for the Sarker

More information

ARCHITECTURE RANCH CHARRETTE TEAM B

ARCHITECTURE RANCH CHARRETTE TEAM B ARCHITECTURE RANCH CHARRETTE TEAM B Architecture Ranch Charette Group 205ASimulate hospital patient or surgery rooms with L/R displays. Compare to physical mock-up rooms nearby. Need reception and waiting

More information

M/s MH ENGINEERING. Company Profile. Safety Quality Progress. www. mhengg.in.

M/s MH ENGINEERING. Company Profile. Safety Quality Progress. www. mhengg.in. Company Profile M/s MH ENGINEERING Safety Quality Progress www. mhengg.in Registered office : 12/A, ROAD NO.1,PARTAPUR CHAUDHARY, IZZAT NAGAR,BAREILLY -243122 (U.P.) INDIA Mobile No +91 9410248294, Email

More information

Facility Repairs - MCAS Cherry Point - Tank Farm A SECTION STRUCTURAL STEEL 05/14

Facility Repairs - MCAS Cherry Point - Tank Farm A SECTION STRUCTURAL STEEL 05/14 SECTION 05 12 00 STRUCTURAL STEEL 05/14 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the

More information

DOMKINUT STEEL FABRICATION LTD.

DOMKINUT STEEL FABRICATION LTD. DOMKINUT STEEL FABRICATION LTD. INDUSTRIAL PARTS AND MACHINES FABRICATION, HOTEL AND HOSPITAL STEEL EQUIPMENT, INDUSTRIAL MAINTENANCE, CONSULTATION SERVICES, WELDING AND FOUNDRY SERVICES. Address: Behind

More information

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL CASES WHERE THE CE MARKING IS NOT POSSIBLE ON THE BASIS OF EN

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL CASES WHERE THE CE MARKING IS NOT POSSIBLE ON THE BASIS OF EN EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and Europe 2020 Sustainable Industrial Policy and Construction CPR 07/04/3 CASES WHERE THE CE MARKING IS NOT POSSIBLE

More information

Explanation of the Handling of Trademark Application Consisting of Geographical Names in Japan and overseas

Explanation of the Handling of Trademark Application Consisting of Geographical Names in Japan and overseas 41.103.03 Explanation of the Handling of Trademark Application Consisting of Geographical Names in Japan and overseas 1. With regard to the handling of trademarks consisting of geographical names both

More information

Civil Engineering Construction I (CBE5031)

Civil Engineering Construction I (CBE5031) Civil Engineering Construction I (CBE5031) Precast Concrete 1 Definition of Precast Concrete Precasting means casting a concrete member at a place other than where it will be used and then moving it to

More information

CF50/100 KW TURBINE ACCESS ROAD, CRANE PLATFORM, CONCRETE, AND LIFTING SPECIFICATIONS C&F GREEN ENERGY REVISION PREPARED BY APPROVED BY DATE

CF50/100 KW TURBINE ACCESS ROAD, CRANE PLATFORM, CONCRETE, AND LIFTING SPECIFICATIONS C&F GREEN ENERGY REVISION PREPARED BY APPROVED BY DATE CF50/100 KW TURBINE ACCESS ROAD, CRANE PLATFORM, CONCRETE, AND LIFTING SPECIFICATIONS C&F GREEN ENERGY REVISION PREPARED BY APPROVED BY DATE 001 First Draft W Hession 12.02.2014 Introduction This document

More information

MANUFACTURING PROCESSES

MANUFACTURING PROCESSES 1 MANUFACTURING PROCESSES - AMEM 201 Lecture 1: DR. SOTIRIS L. OMIROU The Manufacturing is a DRIVING FORCE for any economy We are living in an environment that is created and reshaped by manufacturing

More information

N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System

N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System Version 5.22.13 N-SERIES: NTH2700 SPECIFICATIONS Tubular Composite Top Hung Sliding Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER

More information

Determination 2018/001 Regarding a notice to fix and whether a relocated unit is a building at 17 Pembertons Road, Sefton

Determination 2018/001 Regarding a notice to fix and whether a relocated unit is a building at 17 Pembertons Road, Sefton Determination 2018/001 Regarding a notice to fix and whether a relocated unit is a building at 17 Pembertons Road, Sefton Summary The determination considers whether a unit relocated onto a residential

More information

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &

More information

Bi-Directional Static Load Testing of Drilled Shafts

Bi-Directional Static Load Testing of Drilled Shafts Supplemental Technical Specification for Bi-Directional Static Load Testing of Drilled Shafts SCDOT Designation: SC-M-712 (9/15) September 2, 2015 1.0 GENERAL This work shall consist of furnishing all

More information

Bi-Directional Static Load Testing of Drilled Shafts

Bi-Directional Static Load Testing of Drilled Shafts Supplemental Technical Specification for Bi-Directional Static Load Testing of Drilled Shafts SCDOT Designation: SC-M-712 (01/18) 1.0 GENERAL This work shall consist of furnishing all materials, equipment,

More information

Solid-State Welding Processes. Solid State Bonding 12/2/2009. Cold Welding

Solid-State Welding Processes. Solid State Bonding 12/2/2009. Cold Welding Solid-State Welding Processes Solid-State Welding Processes Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 31 Joining takes place without fusion at the

More information

Mixtures in Industry

Mixtures in Industry 3.7 Mixtures in Industry Key Question: How are mixtures separated in industry? Many industries separate mixtures to make pure products. In this section, you will learn about three industries that separate

More information

Maximize Your Space. Mezzanines are ideal for:

Maximize Your Space. Mezzanines are ideal for: www.vertispace.ws Maximize Your Space Worker productivity and manufacturing efficiencies are under constant scrutiny in today s business world. Whether you re an operations manager charged with expanding

More information

Vardhaman Engineering

Vardhaman Engineering +91-8048763430 Vardhaman Engineering https://www.vardhamanengg.in/ Manufacturing & supplying construction equipment to our customers. Equipment include material handling equipment, hollow block making

More information

SECTION ALTERNATING TREAD STEEL STAIRS

SECTION ALTERNATING TREAD STEEL STAIRS SECTION 05 51 33.23 - ALTERNATING TREAD STEEL STAIRS PART 1 - GENERAL 1.1 SCOPE OF WORK Fabricate and Install metal alternating tread stair assemblies in accordance with the requirements set forth in this

More information

TECHNICAL BID. Name of the party :

TECHNICAL BID. Name of the party : TENDER FORM FOR QUOTED RATE FOR THE SUPPLY OF. TENDER FORM II TECHNICAL BID Name of the party : --------------------------------------- Address : ---------------------------------------- ----------------------------------------

More information

Experience since Bellows Sealed Globe Valve Model protected bellows design

Experience since Bellows Sealed Globe Valve Model protected bellows design Bellows Sealed Globe Valve Model 350 - protected bellows design Successful Concept The industrial success of PHOENIX bellows sealed globe valves in critical service applications is based on: Over 40 years

More information

Pre-Bid Clarification

Pre-Bid Clarification I Bidder I Pre-Bid Clarification ANNEXURE A A. TECHNICAL Sr. No Section Clause No Queries by Vendors NPCIL's response 1 C 1.1 (D) Ventilation fans for DG room: Ventilation system is a part of civil work

More information

8367 TRANSPORTATION WORKER 3

8367 TRANSPORTATION WORKER 3 TRANSPTATION WKER 3 Nature of Work Under limited supervision, at the journey level performs skilled work in the construction and maintenance of highways, related buildings and structures, and erecting

More information

Northpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017

Northpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017 SECTION 055213 - PIPE AND TUBE RAILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SECTION STRUCTURAL STEEL

SECTION STRUCTURAL STEEL SECTION 05120 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this

More information

Development of 700 C Class Steam Turbine Technology

Development of 700 C Class Steam Turbine Technology 10 Development of 700 C Class Steam Turbine Technology EIJI SAITO *1 SHIN NISHIMOTO *2 HIROYUKI ENDO *3 RYUICHI YAMAMOTO *4 KENJI KAWASAKI *5 JUN SATO *6 Mitsubishi Hitachi Power Systems, Ltd. (MHPS) has

More information

NATIONAL INSTITUTE OF TECHNOLOGY DURGAPUR

NATIONAL INSTITUTE OF TECHNOLOGY DURGAPUR NATIONAL INSTITUTE OF TECHNOLOGY DURGAPUR MAHATMA GANDHI AVENUE DURGAPUR 713 209, WEST BENGAL, INDIA FAX: 0343-2546406; Website: www.nitdgp.ac.in Telephones: +91-343- 2545290 (Registrar Office) BID REFERENCE:

More information

MM Despro Engineering Pvt. Ltd.

MM Despro Engineering Pvt. Ltd. MM Despro Engineering Pvt. Ltd. (AN ENGINEERING SOLUTION FOR CEMENT, STEEL & POWER PLANT MACHINARY) ISO 9001:2008 CERTIFIED COMPANY 303, Guru Ram Das Bhawan, Ranjit Nagar Commercial Complex, New Delhi-8

More information

Storage & loading on site SOFREGAZ

Storage & loading on site SOFREGAZ Large Cryogenic above ground LNG Tank Full Containment (9% inner wall + Pre-stressed concrete outer wall) Typical Construction Sequence March 4 th 2011 Storage & loading on site Storage & loading on site

More information

Installation Manual For Conical Tanks. INSTALLATION and MAINTENANCE INSTRUCTIONS FOR CONICAL TANKS

Installation Manual For Conical Tanks. INSTALLATION and MAINTENANCE INSTRUCTIONS FOR CONICAL TANKS INSTALLATION and MAINTENANCE INSTRUCTIONS FOR CONICAL TANKS Page 1 of 10 INDEX 1. Health & Safety 3 2. Introduction 3 3. Requirements 3 4. Working Area 3 5. Equipment 3 6. 2 and 3 metre tank above ground

More information

conveyor solutions Quality Performance Reliability

conveyor solutions Quality Performance Reliability conveyor solutions Quality Performance Reliability 2 3 4 Belt Conveyor For careful and extremely low noise conveying. 10 1 Lineshaft Powered Roller Conveyor The most versatile and economical powered conveyor

More information

Special Application Chain Engineered Steel Chains with Rollers Engineered Steel Chains without Rollers... 14

Special Application Chain Engineered Steel Chains with Rollers Engineered Steel Chains without Rollers... 14 Special Application Chain... 4-9 Engineered Steel Chains with Rollers... 10-13 Engineered Steel Chains without Rollers... 14 Engineered Steel Chain Attachments... 15-29 Drive Chains... 30-35 Welded Steel

More information

Solid-State Welding Processes

Solid-State Welding Processes Solid-State Welding Processes Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 31 Solid-State State Welding Processes Joining takes place without fusion

More information

INDUSTRIAL STORAGE TANKS & SILOS

INDUSTRIAL STORAGE TANKS & SILOS INDUSTRIAL STORAGE TANKS & SILOS THE IMPERIAL ADVANTAGE When it comes to specifying industrial bulk storage needs, trade expertise and trusted consultation from a manufacturer is paramount. But at Imperial

More information

Cantilever Loading Platform Erection Procedures and Guidance Notes

Cantilever Loading Platform Erection Procedures and Guidance Notes Cantilever Loading Platform Erection Procedures and Guidance Notes Please note this is a six page document. 1 Introduction 1 Issue Date: January 2007 It is essential that the procedures are read and fully

More information

Pre-Cast Machine Bases

Pre-Cast Machine Bases Pre-Cast Machine Bases BY WG ENGINEERING Contents Page Product Introduction 1 Justification and Benefits 2 Detailed Illustration 3 Examples for Improvement 5 Our Offer 7 REVISION 1.0-27/09/2016 WG ENGINEERING

More information

L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System

L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System Version 5.22.13 L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER

More information

Company Introduction

Company Introduction Company Introduction TIONG SENG PREFAB HUB (RVD) is a subsidiary of Tiong Seng Holdings Limited. RVD is a precaster specialising in fabrication of concrete components from design development, production

More information