Industrial Pumps MAGNETIC DRIVE PUMPS MECHANICAL DRIVE PUMPS VERTICAL PUMPS
|
|
|
- Pamela Lee
- 5 years ago
- Views:
Transcription
1 1 Lindenwood Drive, Suite 5 Malvern Pennsylvania T F E sales@specialtyplastics.com Industrial Pumps MAGNETIC DRIVE PUMPS MECHANICAL DRIVE PUMPS VERTICAL PUMPS
2 Magnetic Drive Pumps M15 M50 M7 HMT (m CE) 1 M5 Models M7 to M70 8 advised operating range M7 M15 M5 M35 M50 M Flow rate (m3/h) HMT (m CE) M0 advised operating range M10 M00 M50 Models M0 to M390 M90 M Flow rate (m 3 /h) CALL OR SALES@SPECIALTYPLASTICS.COM
3 M00 M390 M0 M90 Pump body made of injected plastic Polypropylene (PP) or Polyvinylidene Fluoride (PVDF) Closed centrifugal pump impeller with diffuser Impeller driven by hight capacity magnetic coupler Excellent resistance to strong acids Max. fluid temperature = 10ºF (70ºC) PP, 30ºF (1ºC) PVDF Very good efficiency No gaskets, no risk of leaks Compatible with fluids of density up to according to models Ceramic / ceramic impeller bearing oversized with ceramic / PTFE stop Integrated electric motor Automatic repriming Optional dry run detector Very long lifetime (running dry prohibited) Reduce dimensions Suction head up to m Enables to shut down the pump in case the volute case is empty Models M7 M15 M5 M35 M50 M70 M0 M10 M00 M50 M90 M390 Motor power rating (kw) 0,01 0,05 0,1 0, 0, 0,5 0,75 1,5, Maximum flow rate (m 3 /h) 0, Maximum manometric head (m) 7 9, ,5 3 diameter (inlet) Ø 1 G 1" DN15 G 1" DN15 G 1" ¼ DN0 G " Tr 8x5 DN5 diameter (outlet) Ø 1 G 1" DN15 G 1" DN15 G 1" ¼ DN0 CALL OR SALES@SPECIALTYPLASTICS.COM
4 Mechanical Drive Pumps A15A30 A15 Pump body made of injected plasticpolypropylene (PP) or Polyvinylidene Fluoride (PVDF) A A7 Excellent resistance to strong acids and bases Max fluid temperature = 10ºF (70ºC) PP, 30ºF (1ºC) PVDF Closed centrifugal pump impeller with diffuser Impeller on drive shaft with mechanical seals Very good efficiency Carbide / carbide gasket, very resistant to wear Integrated electric motor Automatic repriming Reduced demensions Suction head up to m Models A15 A A19 A7 A30 Motor power rating (kw) 0, 0,75, Maximum flow rate (m 3 /h), Maximum manometric head (m) diameter (inlet) Tr 8x5 DN5 Tr 8x5 DN5 diameter (outlet) Manometric head (m CE) Models A15 to A range operating opera advised 15 A30 A7 5 A15 A A Flow rate (m 3 /h) CALL OR SALES@SPECIALTYPLASTICS.COM
5 Mechanical Drive Pumps A31PA33P Pump body made of injected plasticpolypropylene (PP) A 3 PP Excellent resistance to strong acids and bases Max fluid temperature = 10ºF (70ºC) Polypropylene Centrifugal closed impeller and diffuser Very good efficiency Impeller backbalanced on drive shaft with rotating ring Carbide / carbide gasket, very resistant to wear Integrated motor Reduce dimensions Models A33 A31 A3 A33PP A31PP A3PP Motor power rating (kw) 5,5 7,5 5,5 7, Maximum flow rate (m 3 /h) Maximum manometric head (m) diameter (inlet) Ø 5 Ø 5 Ø 5 Tr 8x5 DN5 Tr 8x5 DN5 Tr 8x5 DN5 diameter (outlet) Ø 5 Ø 5 Ø 5 G 3/ DN50 G 3/ DN50 G 3/ DN50 * Optional flange inlet / outlet Manometric head (m CE) 50 5 advised operating range Models A31 to A A33 A33P A30 A31 A31P A3 A3P Flow rate (m 3 /h) CALL OR SALES@SPECIALTYPLASTICS.COM
6 Vertical Pumps T050 T00 T0 Vertical design Pump body made of injected plasticpolypropylene (PP) or Polyvinylidene Fluoride (PVDF) Impeller driven by a cantilever shaft (T050/00 and T07/) Impeller driven by a long drive shaft with ceramic / ceramic bearing (T1/01) Version with backimpeller (T07/) Assembly immersed in bath Excellent resistance to strong acids and bases Max fluid temperature = 10ºF (70ºC) PP, 30ºF (1ºC) PVDF No gaskets, no risk of leaks No wearing parts No gaskets, no risk of leaks Drive shaft height up to 75 mm Operation possible outside bath Models T050 T070 T0/T1 T10/T11 T00/T01 T07 T T1 T0 T Motor power rating (kw) 0,5 0,55 0,75 0,75 1,5 1,5 Max flow rate (m 3 /h) 5 7, 1, ,5 Max manometric head (m) 9 13/1 1,5/17 15,5/.5, diameter (inlet) G 1 ½ DN5 diameter (outet) G " DN3 G " DN3 G " DN3 G 1 ½ DN5 Manometric head (m CE) 1 1 advised operating range Models T050 T 1 8 T050 T070 T07 T0 T T10 T1 T00 T0 T T flow rate (m 3 /h) CALL OR SALES@SPECIALTYPLASTICS.COM
7 Dosing Pumps SPP SPP50 SPP90 Ergonomic design with translucent rotative cover Easy hose replacement Three pump body sizes V or 30V motor Flow from 0.08 l/m to 1 l/h Speed from to 15 rpm Large choice of hoses Teknoprène, Silicona, Viton Agitation Nozzles 5 volumes of liquid at the outlet Injector 1 volume of liquid at the inlet Venturi effect Diffusor Nozzles PVDF Nozzles Venturi designed nozzles Mounting on pipes immersed in the bath and connected to a pump Allows multiplying the flow rate by five Agitates and homogenizes the bath, accelerates the electrolytic metal deposition rate Made of PP or PVDF Excellent resistance to acids and bases CALL OR SALES@SPECIALTYPLASTICS.COM
8 1 Lindenwood Drive, Suite 5 Malvern Pennsylvania T F E sales@specialtyplastics.com Your Engineering Plastics Experts Our experts can provide complete solutions to your fl uid handling problems. We are highly knowledgeable about the various types of engineering plastics available, and we can help you determine what materials or products are best suited for your specifi c process. We can manage the project for you, from start to fi nish, or we can advise you on certain aspects of your project. Our Expert Services Include: Product Selection Material Selection Specifi cation Assistance Engineering and Design Technical Support Plastics Testing Consulting Services Project Management Feasibility Studies Complete Filtration Systems for Your Plating and Industrial Applications Specialty Plastics SIEBEC offers Complete Molded Filtration Systems made with PP or PVDF featuring superior corrosion resistance for your plating and industrial applications. SIEBEC systems have provided solutions in applications for over 50 years worldwide. cartridges pumps FilteRs eductor NoZZles (Including highcapacity LTECH pleated reusable cartridges) Fourpoint Guarantee * Performance Manufacturing Satisfaction Price Reducing Cost of Ownership Speedchange Assembly in 30 Seconds * ReUsable Filter Cartridges Magnetic Drive Pumps Mechanical Drive Pumps Vertical Pumps *Contact us for details. SPP 150 v
NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI
LER half open impeller SILENT spacer coupling ATEX BORN TO RESIST CORROSION compac O 2858 BACK PULL-OUT bare shaft HiEff 3D impeller solid liquid end materials S EL etic drive Viton PEEK flexible diaphragm
AM PUMP RANGE. Part of the MAGNETIC DRIVE Pump Range AM OVERVIEW YOUR PROCESS COVERED MINIMAL MAINTENANCE HIGH EFFICIENCY DESIGN
CAPACITY
NPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI
LER half open impeller SILENT spacer coupling ATEX BORN TO RESIST CORROSION compac O 2858 BACK PULL-OUT bare shaft HiEff 3D impeller solid liquid end materials S EL etic drive Viton PEEK flexible diaphragm
INDUSTRIAL FILTERS APPLICATIONS. Filtration of galvanic baths (Nickel, Zinc, Copper, Chromium, Gold ).
INDUSTRIAL FILTERS APPLICATIONS Filtration of galvanic baths (Nickel, Zinc, Copper, Chromium, Gold ). Filtration of chemical products, process fluids and effluents. Filtration and oil removal of pretreatment
High Performance, Corrosive Handling Pleated Filters
High Performance, Corrosive Handling Pleated Filters WARCO FILTERS WARCO absolute rated filtration systems set the standard for demanding corrosive chemical process filters. WARCO highly engineered, glass-free
AMX - GG PUMP RANGE. Part of the MAGNETIC DRIVE Pump Range AMX-GG OVERVIEW REDUCED LIFE CYCLE COST HIGH EFFICIENCY DESIGN PLASTIC MAGNETIC DRIVE PUMPS
AMX - GG PUMP RANGE CAPACITY
T Series. Self-Priming Centrifugal Pumps
T Series Self-Priming Centrifugal Pumps The World Leader in Solids Handling Self-Priming Pumps. When industry looks for more reliable and efficient ways to move waste, they look to Gorman-Rupp self-priming
Close Coupled Sump Pumps Type ETLB
Close Coupled Sump Pumps Type ETLB»dry running safe«technical data Flow rate Q up to 104 m 3 /h Head H up to 36 m Submersion depth up to 775 (795) mm Suction extension up to 1500 mm Materials limits of
Product Range Abrasion and corrosion resistant pumps
Product Range Abrasion and corrosion resistant pumps PP / PVDF / PE / PE-HD / PFA / PTFE AISI 1 / AISI 1 L / AISI 90 L / HASTELLOY Non-metallic normalized Non-metallic close coupled Stainless steel normalized
Product Range PP / PVDF / PE / PE-HD / PFA / PTFE AISI 316 / AISI 316 L / AISI 904 L / HASTELLOY
Product Range Abrasion and corrosion resistant pumps PP / PVDF / PE / PE-HD / PFA / PTFE AISI 1 / AISI 1 L / AISI 90 L / HASTELLOY NON-METALLIC NORMALIZED NON-METALLIC CLOSE COUPLED STAINLESS STEEL NORMALIZED
FILTRATION FOR INDUSTRIAL APPLICATIONS FILTRATION AND OIL REMOVAL OF PRETREATMENT BATHS, DEGREASING BATHS, CLEANING BATHS
FOR INDUSTRIAL APPLICATIONS AND OIL REMOVAL OF PRETREATMENT BATHS, DEGREASING BATHS, CLEANING BATHS OF INDUSTRIAL PROCESS LIQUIDS OF ELECTROPLATING BATHS, AUTO-CATALYTIC CHEMISTRY AND SURFACE CONVERSION
Introduction. Ultra Reliable
Introduction Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump constructed
Hot dip G ALVANISING SERIES P FILTERS.
SERIES P FILTERS Oil removal from degreasing baths Skimming of the surface of rinsing and pickling baths Agitation of pickling baths Filtration of flux baths OIL REMOVAL FROM DEGREASING, PICKLING, OR RINSING
Introduction. Ultra Reliable
Introduction Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump constructed
PLASTIC PUMPS CPDR and RCNKu
PLASTIC PUMPS CPDR and RCNKu Horizontal Standardised Chemical Pumps in a wide Range of Sizes and Materials. Rheinhuette Pumps, LLC 971 Virginia Avenue Suite B Palm Harbor, FL 34683 USA Phone: 727-753-0880
Introduction. Ultra Reliable
Introduction www.finishthompson.com Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional
Magnetic pumps with small capacity
Magnetic pumps with small capacity Magnetic pumps to suitable for wide High reliability and long life faith Models with 6W-250W of various motor General purpose small capacity magnetic pump TEN type GFR-PP
CREATING POWER SOLUTIONS. Hatz Pumps. Hatz Systems Made in Germany.
CREATING POWER SOLUTIONS. Hatz Pumps Hatz Systems Made in Germany EN www.hatz-diesel.com Hatz Systems develops and produces special systems based on industrial engines. Hatz Systems Key areas of focus
WARRENDER, LTD. Services. Ammonia & CO² Circulation and Transfer Pumps
WARRENDER, LTD. Seal-less Mag-Drive Pumps From Stock or Built-to-Spec Ammonia & CO² Circulation and Transfer Pumps Providing environmentally safe seal-less magnetic pumps of the highest quality for over
Construction features Completely made in stainless steel AISI 304. Automatic cleaning. Permanent magnets, in neodymium
DISCONTINUOUS REFINING MILL SMD 800-1200 Double action refining mill (dispersion + milling) with discontinuous operation and wet milling for printing pastes, colorants and ceramic glaze. The belt transmission
Self-Priming pumps, when it really matters
Self-Priming pumps, when it really matters Horizontal Self-Priming pump www.komak.nl Engineered pump solutions Specially designed and manufactured, by KOMAK, to operate under the most difficult conditons.
ZGE solid non-metallic centrifugal pumps
ZGE solid non-metallic centrifugal pumps IN COMPLIANT TO ISO 1 ZGE ARGAL chemical pumps Quality, Experience, Innovation. THE COMPANY Established as supplier of the galvanic industry the Company ARGAL has
Product Range Non-Metallic Pumps
Product Range Non-Metallic Pumps In / PE-UHMW / / PFA Types Horizontal with Magnetic Drive Horizontal with Mechanical Seal Vertical with Labyrinth Seal Vertical with Mechanical Seal Cantilever Pump Your
APPLICATIONS. This circulator is suitable for drinking water only. Hot water accelerated circulation in distribution loops.
OPERATING LIMITS Flow rates up to : m /h Heads up to :, m Max. operating pressure : bar Max. loop temperature : +8 C Max. circulator temperature: C Max. ambient temperature : + C Water hardness (TH) :
SMP. Single-channel closed impeller. submersible pumps PRODUCT CATALOGUE General characteristics
submersible pumps PRODU AALOGUE 04 Single-channel closed impeller All product images are indicative only General characteristics Single-channel closed impeller motor power,0 kw 6,4 kw poles / 4 / 6 discharge
All product images are indicative only General characteristics
submersible pumps PRODU AALOGUE 0 Multi-channel open impeller All product images are indicative only General characteristics Multi-channel open impeller motor power, 9, kw poles / / 6 discharge DN80 DN50
NUCLEAR POWER CORPORATION OF INDIA LTD TECHNICAL SPECIFICATION ON SUBMERSIBLE PUMPS PAGE NO: 1 OF 4 REV NO : 0 DATA SHEET A
TECHNICAL SPECIFICATION ON SUBMERSIBLE PUMPS PAGE NO: 1 OF 4 DATA SHEET A ANNEXURE - A Sr. Item Description Sr. Item Description A. GENERAL DATA B. PUMP DUTY PARAMETERS 1. System Name 1. Rated capacity,
H-25 Series. Up to 20 gpm (75.7/min) H-25 Specialized Designs
H-25 Series Up to 2 gpm (75.7/min) H-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 72 for complete specifications. The H-25 Hydra-Cell
Product information. UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.
Product information Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.4581 Description Normal priming centrifugal pumps with a double Mechanical seal Application:
MIT - GemmeCotti Magnetic Coupling Centrifug Pumps
MIT - GemmeCotti Magnetic Coupling Centrifug Pumps Our Main Focus Heat Transfer Section Plate Heat Exchangers Brazed Heat Exchangers Flat Access Stations Shell and TubeHeat Exchangers Pressure Vessel Section
D-35 Series. Up to 37 gpm (140 l/min) D-35 Specialized Designs
D-35 Series Up to 37 gpm (14 l/min) D-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 72 for complete specifications. The D-35 Hydra-Cell
Series MTD Magnetic Pump
Magnetic Pump Features Close-coupled design. Polypropylene or PVDF construction. Replaceable shaft. Neodmium magnets to handle specific gravity (SG.8). Mounts to standard NEMA and IEC motor frames. Mounts
Dirty paper take up and filter cake stripper for separation of paper and waste are optional.
K 452 World-wide the most flexible filtration system - ully automatic filtration over filter paper ecause of the possibility of using different filter papers, the desired effects can be achieved. irty
GRUNDFOS alldos Data Booklet. Configurable Dosing Tank Stations
GRUNDFOS alldos Data Booklet DTS Configurable General / Functional scheme General description Dosing tank stations are designed for storing and dosing liquid chemicals. They can be configured with the
Hannah Yan. Mobile/Skype/WhatsAPP: Wechat:yhr MSP HEAVY DUTY SUMP PUMPS
Hannah Yan Email:info@deponpump.cn Mobile/Skype/WhatsAPP:+86 11 32 3669 Wechat:yhr1381 MSP HEAVY DUTY SUMP PUMPS MSP HEAVY DUTY SUMP PUMPS Vertical, shaft driven centrifugal slurry pumps. Rugged pumping
Product Overview. Reaction Unit Filter Reactors Pressure Reactors Thin Film Evaporators Short Path Evaporators Rotary Evaporators
Product Overview Reaction Unit Filter Reactors Pressure Reactors Thin Film Evaporators Short Path Evaporators Rotary Evaporators Asahi Glassplant Inc. Reaction Unit Bench-top Reactor Pilot-plant Reactor
PREMIER Low Profile Induced Draft Cooling Tower Specifications
Fa Delta Cooling Towers, Inc. 185 US Highway 206 Roxbury Township, NJ 07836 973.586.2201 973.586.2243 fax www.deltacooling.com sales@deltacooling.com PREMIER Low Profile Induced Draft Cooling Tower Specifications
SMP. Single-channel closed impeller. motralec. electrical submersible pumps. General characteristics
motralec 4 rue Lavoisier. ZA Lavoisier. 95 HERBLAY EDEX el. : 0.9.97.65.0 / Fax. : 0.9.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com Single-channel closed impeller
PCM DELASCO. Peristaltic pumps Series DSC 65, 80, 100
17 rue Ernest Laval - BP 35-92173 Vanves Cedex France Tel (33) 01 41 08 15 15 - Telex 634 129 F - Fax (33) 01 41 08 15 00 Internet: pcmpompes.com Email: pcm@pcmpompes.com PCM DELASCO Peristaltic pumps
High Performance, Corrosive Handling Filtration Equipment WARCO FILTERS. Series-GF
High Performance, Corrosive Handling Filtration Equipment WARCO FILTERS WARCO high performance, absolute rated filtration systems set the standard for demanding corrosive chemical process filters. WARCO
Self-Priming PETROLEUM PUMPS
Self-Priming PETROLEUM PUMPS G Pumps for Every Petroleum Handling Application orman-rupp manufactures a full line of self-priming centrifugal pumps especially designed for pumping clean, non-abrasive petroleum
Experience In Motion INNOMAG U-MAG. Fluoropolymer-lined, Magnetic Drive Pump
Experience In Motion INNOMAG U-MAG Fluoropolymer-lined, Magnetic Drive Pump Performance, versatility and value The INNOMAG U-MAG fluoropolymer-lined, magnetic drive pump has been specifically designed
Setting Mechanical Seals
GB Setting Mechanical Seals Style 890 Single Stationary Multiple Spring Cartridge Flush connection Drive mechanisms external to the product; Seal faces positioned for maximum protection; A dynamic elastomer
Introduction. Ultra Reliable
Introduction Ultra Reliable Engineered for extreme reliability in the most extreme chemical processing applications, Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump constructed
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 302
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 203 PERFORMANCE CURVE VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW
Tip. For detailed information on the motors please refer to pages
48 49 We select the materials with regard to the liquids to be pumped. Both the pump tube models feature an extremely resistant pure carbon bearing and there are no grease fillings in the shaft tube, so
SEWAGE PUMPS CUTTER PUMPS NON-CLOG PUMPS DRAINAGE PUMPS GRINDER PUMPS SINGLE CHANNEL PUMPS VORTEX SEWAGE PUMPS VORTEX & AGITATOR PUMPS
SEWAGE PUMPS CUTTER PUMPS NON-CLOG PUMPS DRAINAGE PUMPS GRINDER PUMPS SINGLE CHANNEL PUMPS VORTEX SEWAGE PUMPS VORTEX & AGITATOR PUMPS 50 Hz SUBMERSIBLE SEWAGE PUMPS Robust Design, Real Quality Designed
High Pressure Centrifugal Pumps LHK & MHK & HK
High Pressure Centrifugal Pumps LHK & MHK & HK 2 Applications Technical Design Fields of Application Handling of corrosive and abrasive liquids with up to 5 % solids Design Horizontal, radial split, ring
Close Coupled Sealless Pumps
Fybroc Division SERIES 2530 ASME/ANSI SPECIFICATION B73.1 DIMENSIONS SERIES 2630 SELF-PRIMING Close Coupled Sealless Pumps B U L L E T I N 25B1 FYBROC SERIES 2530 CLOSE-COUPLED SEALLESS PUMPS Capacities
BEST ONE SUBMERSIBLE SUMP PUMPS EPA. Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103
CONTENTS -SPECIFICATIONS Page Features & Applications 100 Exploded View 101 Pump & Motor Specifications 102 Selection Chart / Type key 103 -PERFORMANCE CURVES Performance Curve Best One 200 Performance
DIAGRAM FOR CALCULATING PIPE SIZES, DISCHARGE VELOCITIES AND LOSS OF HEAD IN STANDARD STEEL PIPE PIPE FRICTION LOSS CHART
DIAGRAM FOR CALCULATING PIPE SIZES, DISCHARGE VELOCITIES AND LOSS OF HEAD IN STANDARD STEEL PIPE PIPE FRICTION LOSS CHART (For Cast Iron and Concrete Pipes See Note at Right) Lay a straightedge on scales
SAMSON LIQUID RING VACUUM PUMPS. 33 mbar absolute to 1013 mbar absolute. DATASHEET ME-SERIES DOC1005A
TRUCKS FOOD OFFSHORE FISH PROCESS DATASHEET ME-SERIES DOC1005A ME-SERIES Range: 33 mbar absolute to 1013 mbar absolute. Capacity: From 50 m3/h to 165 m3/h Index Page About SAMSON PUMPS...4 Materials...5
Submersible Axial Flow Propeller Pumps
Submersible Axial Flow Propeller Pumps water wastewater flood control EBARA Fluid Handling an EBARA International Corporation company Features Watertight cable entry system prevents capillary action and
INDEX WARRENDER...3 OVERVIEW...4 APPLICATIONS...5. WMCA (Centrifugal alloy pumps) WMCP (Centrifugal non-metallic pumps)...
Mag-Drive Pump Range Our company goal is to provide the solutions that protect our surroundings, raise the environmental awareness, and promote the growth of the community. INDEX WARRENDER...3 OVERVIEW...4
Weir Specialty Pumps. WEMCO Torque-Flow
Weir Specialty Pumps WEMCO Torque-Flow HIGH LOW OIL LEVEL WEMCO Torque-Flow Model C WEMCO Torque-Flow Model C Materials of Construction Ni-Hard, High Chrome Configurations Horizontal Sealing Multiple options
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART 204 PERFORMANCE CHART VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART BEST ONE 204 PERFORMANCE CHART BEST ONE VOX 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPEFICATIONS 203 PERFORMANCE CHART 204 PERFORMANCE CHART VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW
All product images are indicative only General characteristics
submersible pumps PRODU AALOUE 04 Multi-channel open impeller All product images are indicative only eneral characteristics Multi-channel open impeller motor power poles discharge free max flow rate max
MJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps
MJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps PFA PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Lined Type Sealless Corrosion Resistant Chemical Pumps MJ / MJ-B Series Sealless, Fluoropolymer Lined,
INDEX ZGE CENTRIFUGAL PUMPS ISO 2858 FOR CHEMICAL PROCESSING
INDEX ZGE CENTRIFUGAL PUMPS ISO 2 FOR CHEMICAL PROCESSING ARGAL chemical pumps QUALITY AND EXPERIENCE From the artisan's workshop to the modern industrial plant, the strategy of Argal has always been the
FLOWSERVE CORPORATION Guardian Pumps. Centrifugal ANSI Pumps Product Training Program
FLOWSERVE CORPORATION Guardian Pumps Centrifugal ANSI Pumps Product Training Program April 2017 Sealless Pumps Definition A pump that is designed with no externally actuated shaft penetrating the pump
60Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials
6Hz Route range ZMR mechanical sealed TMR magnetical driven centrifugal pumps in thermoplastic materials 2 Route TMR - ZMR In this catalog Argal proposes the range of ROUTE pumps, inclusive of magnetical
KGK chemical sump pump
KGK chemical sump pump the most compact long coupled vertical pump KGK MAIN FEATURES The KGK series Argal pumps are centrifugal and designed for vertical installations. They have column and volute casing
FYBROC SERIES 2530 CLOSE-COUPLED SEALLESS PUMPS
FYBROC SERIES 2530 CLOSE-COUPLED SEALLESS PUMPS Capacities to 1500 GPM (350 m 3 /hr) Heads to 00 feet (125 m) Powers to 100 HP (75 kw) Temperatures to 200 F (93 C) Working Pressures to 200 PSI (1,380 kpa)
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SWP. Self Priming Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SWP For more than 60 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is
- SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE OPTIMA 203
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 203 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE
VSS S U B M E R S I B L E S E W A G E P U M P S
7 2 9 8 / 2 3 HP % % 64% 7 5 HP HP 5 HP % % C u r v e P a g e V S S - 4 5 R P M M O D E L : V S S - 4 E I M P E L L E R : V S A - 4 C - 2-5 A l s o a p p l i e s t o V S S - 5 E & V S S - 6 E 7 7 65 55
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
SAMSON LIQUID RING VACUUM PUMPS KE-SERIES. 33 mbar, absolute to 3.5 bar, gauge DATASHEET KE-SERIES DOC1013
TRUCKS FOOD OFFSHORE FISH PROCESS DATASHEET KE-SERIES DOC113 KE-SERIES Range: 33 mbar, absolute to 3.5 bar, gauge Capacity: From 15 m3/h to 32 m3/h KE SERIES Index Page About SAMSON PUMPS... 4 Materials...
CombiSump. Vertical long shaft sump pump, according to ISO 2858, EN 733, API 610 (VS4)
CombiSump Vertical long shaft sump pump, according to ISO 2858, EN 33, API 6 (VS4) Johnson Pump, An SPX FLOW Brand CombiSump SPX FLOW develops, manufactures and markets Johnson Pump branded positive displacement
Close Coupled Sealless Pumps
Fybroc Division SERIES 2 ASME/ANSI SPECIFICATION B73.1 DIMENSIONS SERIES 26 SELF-PRIMING Close Coupled Sealless Pumps B U L L E T I N 2B1 FYBROC SERIES 2 CLOSE-COUPLED SEALLESS PUMPS Capacities to 60 GPM
Fristam FZX Sanitary Liquid-Ring Pumps
Fristam FZX Sanitary Liquid-Ring Pumps Reduce Product Loss and Ensure Consistent CIP Cycles Fristam s FZX Series sanitary liquid-ring pumps provide new capabilities for handling products with entrained
GM-V. Chemical gear pumps Highly Corrosion-Resistant Sealless Gear Pump
GM-V s e r i e s Chemical gear pumps Highly Corrosion-Resistant Sealless Gear Pump Iwaki's Chemical Gear Pump GM-V is an internal gear pump made of highly corrosion-resistant materials. During pump operation,
Operating & Maintenance Manual JEC JCP Series. Centrifugal Pumps
Operating & Maintenance Manual JEC JCP Series Centrifugal Pumps JEC LTD. 408, Cheongyo-ri, Bibong-myun, Hwaseong-si, Gyeonggi-do, South Korea Tel: +82 31 355 0316 Fax: +82 31 355 0319 www.jecpump.com E-mail:
3M High Flow. Filtration System. Performance in a Compact Design. Lenntech. 3M Purification. Full Line Brochure
3M Purification Full Line Brochure Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 3M High Flow Filtration Performance in a Compact Design Innovative technology to
OF CENTRIFUGAL TYPE ba.
Pumps Mixers Aeration Controls Services SCANPUMP PROCESS pumps OF CENTRIFUGAL TYPE ba. www.scanpump.com Reliable process pumps Application BA-pumps have an extensive range of applications and a rugged
ECLIPSE. NSF/ANSI 61* *Non-metallic Only EXTERNAL GEAR PUMP ENGINEERED PRODUCTS. Flow: up to 33 gpm (125 lpm)
ECLIPSE EXTERNAL GEAR PUMP Flow: up to 33 gpm (125 lpm) Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 3 psi (2.7 bar) Temperature: from -4 to 45 F (-4 to 232 C) Viscosity: up to
GVSO chemical submersible pump: The safe pumping solution for high-pressure and high-temperature applications
For direct publiction GVSO chemical submersible pump: The safe pumping solution for high-pressure and high-temperature applications Wiesbaden, June 2015. The GVSO chemical submersible pump from FRIATEC
FS 1000/3000 SIP BIOREACTORS/FERMENTORS FOR INDUSTRIAL PROCESSES
FS 1000/3000 SIP BIOREACTORS/FERMENTORS FOR INDUSTRIAL PROCESSES THE COMPANY Bionet is a specialist in bioprocesses engineering. We provide equipment (Bioreactors, Cross-Flow Filtration Systems and Cleaning-In-Place
Download From:
Fluid Mechanics 1. A single acting reciprocating pump, running at 60 r.p.m, delivers 0.01 m2/sec of water. The area of the piston is0.05m2 and stroke length is 40 cm. Then theoretical discharge of the
CombiSump. Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610
CombiSump Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610 CombiSump CombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump s Combi-system,
F3 50/500 PILOT AND SMALL INDUSTRIAL PRODUCTION SIP BIOREACTORS/FERMENTORS
F3 50/500 PILOT AND SMALL INDUSTRIAL PRODUCTION SIP BIOREACTORS/FERMENTORS THE COMPANY Bionet is a specialist in bioprocesses engineering. We provide equipment (Bioreactors, Cross-Flow Filtration Systems
MANUFACTURING PROGRAMME
MANUFACTURING PROGRAMME Equipment for corrosive solutions and environments CEPIC has specialized in the manufacture of anti-corrosion equipment since 1958. Our experience enables us to offer a range of
AME PUMP RANGE. Part of the MAGNETIC DRIVE Pump Range AME OVERVIEW ROBUST DESIGN PROVEN RELIABILITY PLASTIC MAGNETIC DRIVE PUMPS CAPACITY <180M /HR
CAPACITY
Pumps Mixers Aeration Controls Services ABS PROCESS PUMPS OF CENTRIFUGAL TYPE BA. 1
Pumps Mixers Aeration Controls Services ABS PROCESS PUMPS OF CENTRIFUGAL TYPE BA. www.absgroup.com 1 Reliable process pumps Application BA-pumps have an extensive range of applications and a rugged design
ROWA-HP. High-Pressure Centrifugal Pump
ROWA-HP High-Pressure Centrifugal Pump Fields of Application Handling of clean to slightly contaminated corrosive liquids up to discharge pressures of 120 bar Design Horizontal, radial split, ring section
Product Catalog. For use with Mildly-Corrosive, Semi-Corrosive, and Highly-Corrosive Liquids
Product Catalog For use with Mildly-Corrosive, Semi-Corrosive, and Highly-Corrosive Liquids For Chemical Plating Electroplating circuit boards involves high heat and the circulation of incredibly caustic
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTG. Vertical Turbine Generator
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y VTG For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an
Minerals. WARMAN Centrifugal Slurry Pumps WBV Vertical Cantilever Slurry Sump Pump Series
Minerals WARMAN Centrifugal Slurry Pumps WBV Vertical Cantilever Slurry Sump Pump Series The Warman WBV ultra heavy-duty range of vertical cantilevered slurry pumps sets a new industry benchmark for general
RRB TECHNICAL EXAM QUESTIONS
RRB TECHNICAL EXAM QUESTIONS Fluid Mechanics 1. A single acting reciprocating pump, running at 60 r.p.m, delivers 0.01 m2/sec of water. The area of the piston is0.05m2 and stroke length is 40 cm. Then
SXVS HEAVY DUTY SUMP PUMPS
SXVS HEAVY DUTY SUMP PUMPS VOLUME ONE ISSUED FEBRUARY 14 SXVS HEAVY DUTY SUMP PUMPS Vertical, shaft driven centrifugal slurry pumps. Rugged pumping solution for the transfer of slurries and large particles
griswold EF&G Heavy Duty end suction
griswold EF&G Heavy Duty end suction centrifugal pumps H E A V Y D U T Y E N D S U C T I O N C E N T R I F U G A L P U M P S GRISWOLD H E A V Y D U T Y E N D FLANGED CAST IRON CASING Our class 30 grade
TM Series Induced Draft Cooling Tower Specifications
Delta Cooling Towers, Inc. 41 Pine Street P.O. Box 315 Rockaway, New Jersey 07866-0315 Telephone 973.586.2201 Fax 973.586.2243 www.deltacooling.com sales@deltacooling.com TM Series Induced Draft Cooling
Best Practice Pump Control
Best Practice Pump Control Contents 1 Introduction 4 General Recommendations 5 2 Eff icient Pumping System Operation 6 3 Types of Control 7 3.1 Stop/start control 7 3.2 Flow control valve 7 3.3 By-pass
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Vertical
C o l u m n S u m p P u m p s
Column Sump Pumps Column Sump Pumps Regent Column Sump Pumps are column versions of the popular Regent end suction centrifugal models. This style of pump is advantageous when pumping high temperature liquids
A HISTORY OF AQUATIC EXCELLENCE
A HISTORY OF AQUATIC EXCELLENCE Ever since our modest beginnings in 1934, Danner Manufacturing has developed and produced innovative products for aquarium hobbyists and professionals. We introduced the
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202-203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300-301 QUANTITY FOR