ADVANCED ANALYTICAL TECHNOLOGIES, INC.

Transcription

1 ADVANCED ANALYTICAL TECHNOLOGIES, INC. Safety Data Sheet SECTION 1: Identification 1.1 Product identifier Product name 1.2 Recommended use of the chemical and restrictions on use For Research and Development/Experimental Use Only 1.3 Supplier s details Name Address Advanced Analytical Technologies, Inc SE Oak Tree Ct. Suite 101 Ankeny, IA USA Telephone Fax Emergency phone number(s) (Monday-Friday 8:00AM-5.00PM CST) SECTION 2: Hazard identification 2.1 Classification of the substance or mixture GHS classification in accordance with OSHA (29 CFR ) - Toxic to reproduction (chapter 3.7), Cat. 1B 2.2 GHS label elements, including precautionary statements Pictogram Version: 1.0, Date of issue: , p. 1 of 7

2 Signal word Hazard statement(s) H360 Precautionary statement(s) P201 P202 P280 P308+P313 P405 P501 Danger May damage fertility or the unborn child Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/protective clothing/eye protection/face protection. IF exposed or concerned: Get medical advice/attention. Store locked up. Dispose of contents/container to an approved waste disposal plant. 2.3 Other hazards which do not result in classification SECTION 3: Composition/information on ingredients 3.1 Substances Hazardous components 1. Sodium Tetraborate Decahydrate Concentration < 5 % (Weight)* Other names / synonyms borax; Borax (B4Na2O710H2O); Sodium borate; Sodium borate decahydrate; sodium pyroborate CAS no Non-hazardous components 2. WATER Concentration > 95 % (Weight)* Other names / synonyms DIHYDROGEN OXIDE; HYDROGEN OXIDE CAS no Trade secret statement (OSHA (i)) *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First-aid measures 4.1 Description of necessary first-aid measures If inhaled In case of skin contact Move to fresh air. If breathing is difficult, give oxygen. Wash off immediately with plenty of water for at least 15 minutes. In case of eye contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Version: 1.0, Date of issue: , p. 2 of 7

3 If swallowed Do not induce vomiting. Obtain medical attention. SECTION 5: Fire-fighting measures 5.1 Suitable extinguishing media Water spray. Carbon dioxide (CO2). Dry chemical foam. 5.2 Specific hazards arising from the chemical Keep product and empty container away from heat and sources of ignition. 5.3 Special protective actions for fire-fighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. SECTION 6: Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation. Use personal protective equipment. 6.2 Environmental precautions Should not be released into the environment. 6.3 Methods and materials for containment and cleaning up Sweep up or vacuum up spillage and collect in suitable container for disposal. SECTION 7: Handling and storage 7.1 Precautions for safe handling Avoid contact with skin and eyes. Avoid contact with clothing. Wash hands before breaks and immediately after handling the product. Ensure adequate ventilation. 7.2 Conditions for safe storage, including any incompatibilities Keep containers tightly closed in a dry, cool and well-ventilated place. SECTION 8: Exposure controls/personal protection 8.2 Appropriate engineering controls Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. 8.3 Individual protection measures, such as personal protective equipment (PPE) Eye/face protection Wear appropriate protective eyeglasses or chemical safety goggles. Skin protection Wear appropriate protective gloves and clothing to prevent skin exposure. Body protection Version: 1.0, Date of issue: , p. 3 of 7

4 Wear appropriate protective gloves and clothing to prevent skin exposure. Respiratory protection Wear appropriate respiratory protection when needed. SECTION 9: Physical and chemical properties Information on basic physical and chemical properties Appearance/form Odor Odor threshold ph Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) Upper/lower flammability limits Upper/lower explosive limits Vapor pressure Vapor density Relative density Solubility(ies) Partition coefficient: n-octanol/water Auto-ignition temperature Decomposition temperature Viscosity Explosive properties Oxidizing properties Liquid SECTION 10: Stability and reactivity 10.1 Reactivity None known, based on information available 10.2 Chemical stability Stable under normal conditions Possibility of hazardous reactions None under normal processing Conditions to avoid Incompatible materials Strong oxidizing agents, Strong acids, Powdered metal salts 10.6 Hazardous decomposition products Oxides of boron Version: 1.0, Date of issue: , p. 4 of 7

5 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA. Reproductive toxicity Experiments have shown reproductive toxicity effects on laboratory animals. STOT-single exposure STOT-repeated exposure Aspiration hazard SECTION 12: Ecological information Toxicity Sodium Tetraborate Decahydrate Freshwater Algae Freshwater Fish Water Flea mg/l EC50 96h 340 mg/l LC50 96h mg/l LC mg/l EC50 = 96h 708 mg/l LC50 96h 48h (Pimephales promelas) Version: 1.0, Date of issue: , p. 5 of 7

6 Persistence and degradability Persistence is unlikely based on information available. Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment PBT/vPvB assessment not available as chemical safety assessment not required/not conducted SECTION 13: Disposal considerations Disposal of the product Dispose of material in accordance with all federal, state, and local regulations. Disposal of contaminated packaging Dispose of as unused product. SECTION 14: Transport information DOT (US) Not dangerous goods IMDG Not dangerous goods IATA Not dangerous goods SECTION 15: Regulatory information 15.1 Safety, health and environmental regulations specific for the product in question SARA 311/312 Hazards Chronic Health Hazard No components are subject to the Massachusetts Right to Know Act. SARA 313 Components This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. Massachusetts Right To Know Components Sodium Tetraborate Decahydrate New Jersey Right To Know Components Sodium Tetraborate Decahydrate Pennsylvania Right To Know Components Sodium Tetraborate Decahydrate Version: 1.0, Date of issue: , p. 6 of 7

7 California Prop. 65 Components This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. SECTION 16: Other information Revision date: November 2, 2015 This information provided concerning this Safety Data Sheet is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, expressed or implied, with respect to such information and we assume no liability resulting from its use. Users should make their own investigations to determining the suitability of the information for their particular purposes. This material is for R&D/experimental use only. In no event shall Advanced Analytical be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, however arising, even if Advanced Analytical has been advised of the possibility of such damages. Responsibility for SDS: Advanced Analytical Technologies, Inc SE Oak Tree Ct., Suite 101 Ankeny, IA Version: 1.0, Date of issue: , p. 7 of 7