: ROYAL FLUSH TOILET FLUID

Transcription

1 Date of issue: Revision date: Supersedes: Version: 10.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Trade name : ROYAL FLUSH TOILET FLUID Product code : UNI 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Intended for general public Main use category Use of the substance/mixture Function or use category : Consumer use : Additive for the waste-holding tank of mobile toilets. : Cleaning/washing agents and additives, Odour agents Uses advised against 1.3. Details of the supplier of the safety data sheet UNIPART LEISURE Parkwood House, Charter Avenue, CV4 8DA Canley, Coventry - UNITED KINGDOM T +44(0) /2 leisure@unipart.co.uk Emergency telephone number Country Organisation/Company Address Emergency number UNITED KINGDOM SECTION 2: Hazards identification 2.1. Classification of the substance or mixture National Poisons Information Service (Birmingham Centre) City Hospital Classification according to Regulation (EC) No. 1272/2008 [CLP] Not classified Classification according to Directive 67/548/EEC or 1999/45/EC Not classified Adverse physicochemical, human health and environmental effects 2.2. Label elements Labelling according to Directive 67/548/EEC or 1999/45/EC Extra phrases 2.3. Other hazards SECTION 3: Composition/information on ingredients 3.1. Substances 3.2. Mixture Dudley Road B18 7QH Birmingham : Safety data sheet available for professional user on request This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II (UK only) EN (English) SDS Ref: /5

2 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Not expected to require first aid measures. : Remove contaminated clothing and shoes. Flush with plenty of water. : In case of eye contact, immediately rinse with clean water for minutes. Seek medical attention if irritation develops. : Rinse mouth. If swallowed, seek medical advice immediately and show this container or label Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Carbon dioxide. Dry powder. Water spray. Foam. Unsuitable extinguishing media : Do not use a heavy water stream Special hazards arising from the substance or mixture Fire hazard : The product is not flammable. Hazardous decomposition products in case of fire : In case of fire, product can produce hazardous vapours and fumes Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Avoid (reject) fire-fighting water to enter environment. : Self-contained breathing apparatus recommended. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Can be slippery on hard, smooth walking area. Clean spills promptly. Wear suitable protective clothing For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent any contamination of surface water or groundwater by the undiluted product. Product should be treated (biological waste water treatment) before entering surface waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Storage temperature : C 7.3. Specific end use(s) : Use sand or absorptive granules to soak up any spilled product and store it in a container. Next, rinse the contaminated surface with water and leave it to dry. Dispose of in accordance with the procedure set out in section 13. : Avoid contact with skin and eyes. Keep container tightly closed. : Keep away from food, drink and animal feeding stuffs. Store at a temperature between -20 C and 40 C. Maintain adequate ventilation. Store away from reducing agents. : Strong bases. Strong acids. Royal Flush Toilet Fluid keeps your waste-holding tank clean and helps to prevent gas build-up, as well as reducing and masking unpleasant smells EN (English) SDS Ref: /5

3 SECTION 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Personal protective equipment Hand protection Eye protection Respiratory protection : Avoid all unnecessary exposure. : Read the instructions for use before handling and dispensing this product. When using, do not eat, drink or smoke. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Colour Odour Odour threshold : Liquid : Blue. ph : 5-6 Relative evaporation rate (butylacetate=1) : characteristic. Melting point : -20 C Freezing point Boiling point : ~ 100 C Flash point : > 100 C Self ignition temperature Decomposition temperature Flammability (solid, gas) Vapour pressure Relative vapour density at 20 C Relative density Density : Non flammable : 1,29-1,31 g/ml Solubility : Water: 100 % Log Pow Log Kow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits 9.2. : > 100 mpa.s. : Not known. VOC content : 1,25 % SECTION 10: Stability and reactivity Reactivity Chemical stability Stable up to 50 C. At an average temperature of 30 C, Royal Flush Toilet Fluid can be kept for several years. After a few years, there might be a slight reduction in strength Possibility of hazardous reactions None under normal conditions Conditions to avoid Direct sunlight. Extremely high or low temperatures EN (English) SDS Ref: /5

4 10.5. Incompatible materials Reducing agents Hazardous decomposition products According to process conditions, hazardous decomposition products may be generated. Carbon dioxide. Carbon monoxide. Nitrogen oxides. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Irritation Corrosivity Sensitisation Repeated dose toxicity Carcinogenicity Mutagenicity Toxicity for reproduction Potential Adverse human health effects and symptoms ph: 5-6 ph: 5-6 : Based on available data, the classification criteria are not met. SECTION 12: Ecological information Toxicity Persistence and degradability ROYAL FLUSH TOILET FLUID Persistence and degradability The surfactant used in this product shows a biodegradability of > 60 % (readily biodegradable), according to OECD 301 D, Closed Bottle Test (Information of manufacturer). The fragrance is > 60 % biodegradable according to OECD 301D, Closed Bottle Test Bioaccumulative potential ROYAL FLUSH TOILET FLUID Bioaccumulative potential Not established Mobility in soil Results of PBT and vpvb assessment Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations Ecology - waste materials : Avoid release to the environment : Product residues should be treated as chemical waste in accordance with government regulations. Rinsed packaging may be used for recycling. : Avoid release to the environment. SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA UN number No dangerous good in sense of transport regulations UN proper shipping name Transport hazard class(es) Packing group EN (English) SDS Ref: /5

5 14.5. Environmental hazards : No supplementary information available Special precautions for user Overland transport Transport by sea Air transport Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations No REACH Annex XVII restrictions Contains no REACH candidate substance VOC content : 1,25 % National regulations Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Indication of changes: Revised safety data sheet in accordance with commisssion regulation (EU) No 453/2010. Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and mixturejs, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. : None. SDS EU (REACH Annex II) - TBV This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product EN (English) SDS Ref: /5