TECHNICAL DATA BULLETIN

Transcription

1 TECHNICAL DATA BULLETIN All-Purpose Hydraulic Oil DESCRIPTION: Anti-wear hydraulic oil designed with additives that offer excellent rust protection, strong anti-wear properties, and superior thermal stability. Contains select paraffinic base stocks which provide high oxidation resistance. PHYSICAL CHARACTERISTICS - TYPICAL LEADERS IN LUBRICANTS ISO Grade Gravity, API Viscosity 100ºF ºF ºC ºC Viscosity Index, min Color Amber Amber Amber Pour Point, F ( C) -27 (-33) -22 (-30) -17 (-27) Flash Point, F ( C) 430 (222) 445 (230) 470 (244) TEST RESULTS: Copper Corrosion, ASTM D-130 1a 1a 1a Rust Test, 48 hrs., ASTM D-665B Pass Pass Pass Four Ball Wear, ASTM D-4172 (20 kg, 54 C, 1800 rpm, 1 hr.).62 mm.32 mm.30 mm Total Acid Number (TAN), ASTM D Foam Test, ASTM D-892 Tendency/Stability Sequence I 0/0 0/0 0/0 Sequence II 0/0 0/0 0/0 Sequence III 0/0 0/0 0/0 Oxidation Test, hrs, ASTM D Water Separation, ASTM D-1401 ml oil-ml water-ml emulsion (mins.) (15) (15) (20) MEETS PERFORMANCE REQUIREMENTS OF: Denison HF-0 Vickers I-286-S (Industrial) and M-2950-S (Mobile) Cincinnati Machine P-68 (4932), P-69 (4934), and P-70 (4933) USDA H2 CETOP RP91H AFNOR NF E (HM) DIN Part II APPLICATION: Applications include both mobile and stationary hydraulic systems that call for a superior anti-wear hydraulic fluid, that will outperform conventional anti-wear hydraulic oils. 300 Bailey Ave Fort Worth, Texas LE PRODUCTS MANUFACTURED UNDER AN fax ISO 9001:2000 CERTIFIED QUALITY SYSTEM

2 BENEFICIAL QUALITIES: Contains 100% paraffinic base oils which provide high oxidation resistance. Special anti-wear additive package greatly reduces wear to assure longer life for bearings and rubbing surfaces. Excellent rust protection. Nonfoaming in service. LI50025 Rev SS TDB/

3 LUBRICATION ENGINEERS, INC. P.O. Box 7128 FORT WORTH, TX MATERIAL SAFETY DATA SHEET SECTION I - PRODUCT IDENTIFICATION SUPPLIER: EMERGENCY TELEPHONE NUMBERS.: Lubrication Engineers, Inc. Company: (817) P.O. Box 7128 In the event of an emergency spill, fire, or exposure Call: Fort Worth, TX Chemtrec: (Within USA) (800) (Outside USA call collect) (703) CHEMICAL NAME AND SYNONYMS: TRADE NAME AND SYNONYMS: 4932 All-Purpose Hydraulic Oil CHEMICAL FAMILY: Hydrocarbon FORMULA: SECTION II - TYPICAL CHEMICAL AND PHYSICAL PROPERTIES APPEARANCE: 210 F, 100 C, cst Dark amber lubricant ODOR: 100 F, 40 C, cst Lube oil odor RELATIVE DENSITY: SOLUBILITY IN WATER: PH: 6-8 (Air=1) >1 Negligible MELTING POINT: F POUR POINT: F -27 BOILING POINT: F FLASH POINT: F (Method) > (C.O.C.) VAPOR PRESSURE: SPECIFIC GRAVITY: (H 2 O=1) (mm 60 F) < SECTION III - INGREDIENTS WT PCT TLV ORAL DERMAL (APPROX) LD 50 LD 50 HAZARDOUS INGREDIENTS: Oil Mist (mineral) > mg/m 3 -TWA Unknown Unknown Zinc dialkyldithiophosphate Unknown Unknown Unknown NON-HAZARDOUS INGREDIENTS: ADDITIVES AND/OR OTHER INGREDIENTS: This product is a mixture. The specific chemical identity of hazardous ingredients and non-hazardous ingredients, their C.A.S. numbers and their exact percent of composition are proprietary to Lubrication Engineers, Inc. and are being withheld as Trade Secrets. The above listing of hazardous ingredients discloses the properties, approximate concentration and known toxicological effects of the hazardous ingredients. This material is an automotive/industrial lubricant with a low order of toxicity and irritancy. The product is formulated with ingredients that are not designated as harmful to the ozone. REGULATORY INFORMATION: SARA Title III: This product does not contain any chemical substance on the SARA Extremely Hazardous Substances list. If this product contains any chemicals that are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372, they will be listed in the above HAZARDOUS INGREDIENTS section. TSCA: This material is in compliance with the Toxic Substances Control Act (15 USC ) and all components of this product appear on the Toxic Substance Control Act (TSCA) inventory list. Clean Air Act: No ozone depleting chemicals listed in Title VI, Stratospheric Ozone Protection, Section 602 of the Clean Air Act are present or used in the manufacturing process of this product. SECTION IV - FIRE AND EXPLOSION HAZARD DATA FLASH POINT: F (Method) FLAMMABLE LIMITS: LEL UEL 430(C.O.C.) Unknown EXTINGUISHING MEDIA: Foam, dry chemical, water fog, or carbon dioxide SPECIAL FIRE FIGHTING PROCEDURES: Do not direct a solid stream of water into fire. Treat as a petroleum oil fire. Respiratory protection required for fire fighting personnel. UNUSUAL FIRE AND EXPLOSION HAZARDS: None SECTION V - HEALTH HAZARD DATA THRESHOLD LIMIT VALUE: (If Established) Not established. Oil mist = 5mg/m 3 EFFECTS OF OVEREXPOSURE: Although there are no consistent primary routes of entry, the product may cause mild dermatitis upon prolonged contact and is expected to be an eye and lung irritant. Any existing skin, eye, or lung irritation may be aggravated by direct contact. No components are listed on OSHA, I.A.R.C., or N.T.P. lists for carcinogens. SECTION VI - EMERGENCY AND FIRST AID PROCEDURES EYE CONTACT: Flush immediately with water until irritation subsides. SKIN CONTACT: Wash affected skin area with mild soap and water. INGESTION: Do not induce vomiting. Contact a physician. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Contact a physician. SECTION VII - REACTIVITY DATA STABILITY: (Thermal, Light, Etc.) CONDITIONS TO AVOID: 4932 All-Purpose Hydraulic Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 1

4 Stable Contact with nuclear radiation and strong oxidizing materials. INCOMPATIBILITY: (Materials to avoid) Strong oxidizing materials. HAZARDOUS DECOMPOSITION PRODUCTS: Dense smoke; oxides of C, S, Zn and P; hydrogen sulfide. HAZARDOUS POLYMERIZATION: Will not occur. SECTION VIII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Treat as a petroleum oil spill. WASTE DISPOSAL METHOD: Incinerate where permitted under federal, state, and local laws. Used petroleum products may be recycled through re-refining processes. SECTION IX - SPECIAL PROTECTION INFORMATION EYE PROTECTION: Sufficient to avoid direct contact. SKIN PROTECTION: Protective neoprene or plastic gloves may be desired. RESPIRATORY PROTECTION: VENTILATION: OTHER: Usually not needed. SECTION X - SPECIAL PRECAUTIONS Close containers when not in use. Keep away from heat, sparks, open flames, and strong oxidants. Avoid eye contact and prolonged skin contact. Avoid breathing oil mists. Wash thoroughly after handling. SECTION XI - HAZARD RATINGS There are several recognized and accepted systems that assign hazard ratings to materials. Although this product has not been evaluated specifically against these systems, the ratings for the National Fire Protection Association (NFPA) and the National Paint and Coatings Association's Hazardous Material Identification System (HMIS) are: NFPA HMIS Health 2 1 Flammability 1 1 Reactivity All-Purpose Hydraulic Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 2

5 LUBRICATION ENGINEERS, INC. P.O. Box 7128 FORT WORTH, TX MATERIAL SAFETY DATA SHEET SECTION I - PRODUCT IDENTIFICATION SUPPLIER: EMERGENCY TELEPHONE NUMBERS.: Lubrication Engineers, Inc. Company: (817) P.O. Box 7128 In the event of an emergency spill, fire, or exposure Call: Fort Worth, TX Chemtrec: (Within USA) (800) (Outside USA call collect) (703) CHEMICAL NAME AND SYNONYMS: TRADE NAME AND SYNONYMS: 4933 All-Purpose Hydraulic Oil CHEMICAL FAMILY: Hydrocarbon FORMULA: SECTION II - TYPICAL CHEMICAL AND PHYSICAL PROPERTIES APPEARANCE: 210 F, 100 C, cst Dark amber lubricant ODOR: 100 F, 40 C, cst Lube oil odor RELATIVE DENSITY: SOLUBILITY IN WATER: PH: 6-8 (Air=1) >1 Negligible MELTING POINT: F POUR POINT: F -22 BOILING POINT: F FLASH POINT: F (Method) > (C.O.C.) VAPOR PRESSURE: SPECIFIC GRAVITY: (H 2 O=1) (mm 60 F) < SECTION III - INGREDIENTS WT PCT TLV ORAL DERMAL (APPROX) LD 50 LD 50 HAZARDOUS INGREDIENTS: Oil Mist (mineral) > mg/m 3 -TWA Unknown Unknown Zinc dialkyldithiophosphate Unknown Unknown Unknown NON-HAZARDOUS INGREDIENTS: ADDITIVES AND/OR OTHER INGREDIENTS: This product is a mixture. The specific chemical identity of hazardous ingredients and non-hazardous ingredients, their C.A.S. numbers and their exact percent of composition are proprietary to Lubrication Engineers, Inc. and are being withheld as Trade Secrets. The above listing of hazardous ingredients discloses the properties, approximate concentration and known toxicological effects of the hazardous ingredients. This material is an automotive/industrial lubricant with a low order of toxicity and irritancy. The product is formulated with ingredients that are not designated as harmful to the ozone. REGULATORY INFORMATION: SARA Title III: This product does not contain any chemical substance on the SARA Extremely Hazardous Substances list. If this product contains any chemicals that are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372, they will be listed in the above HAZARDOUS INGREDIENTS section. TSCA: This material is in compliance with the Toxic Substances Control Act (15 USC ) and all components of this product appear on the Toxic Substance Control Act (TSCA) inventory list. Clean Air Act: No ozone depleting chemicals listed in Title VI, Stratospheric Ozone Protection, Section 602 of the Clean Air Act are present or used in the manufacturing process of this product. SECTION IV - FIRE AND EXPLOSION HAZARD DATA FLASH POINT: F (Method) FLAMMABLE LIMITS: LEL UEL 445 (C.O.C.) Unknown EXTINGUISHING MEDIA: Foam, dry chemical, water fog, or carbon dioxide SPECIAL FIRE FIGHTING PROCEDURES: Do not direct a solid stream of water into fire. Treat as a petroleum oil fire. Respiratory protection required for fire fighting personnel. UNUSUAL FIRE AND EXPLOSION HAZARDS: None SECTION V - HEALTH HAZARD DATA THRESHOLD LIMIT VALUE: (If Established) Not established. Oil mist = 5mg/m 3 EFFECTS OF OVEREXPOSURE: Although there are no consistent primary routes of entry, the product may cause mild dermatitis upon prolonged contact and is expected to be an eye and lung irritant. Any existing skin, eye, or lung irritation may be aggravated by direct contact. No components are listed on OSHA, I.A.R.C., or N.T.P. lists for carcinogens. SECTION VI - EMERGENCY AND FIRST AID PROCEDURES EYE CONTACT: Flush immediately with water until irritation subsides. SKIN CONTACT: Wash affected skin area with mild soap and water. INGESTION: Do not induce vomiting. Contact a physician. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Contact a physician. SECTION VII - REACTIVITY DATA STABILITY: (Thermal, Light, Etc.) CONDITIONS TO AVOID: 4933 All-Purpose Hydraulic Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 1

6 Stable Contact with nuclear radiation and strong oxidizing materials. INCOMPATIBILITY: (Materials to avoid) Strong oxidizing materials. HAZARDOUS DECOMPOSITION PRODUCTS: Dense smoke; oxides of C, S,Zn and P; hydrogen sulfide. HAZARDOUS POLYMERIZATION: Will not occur. SECTION VIII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Treat as a petroleum oil spill. WASTE DISPOSAL METHOD: Incinerate where permitted under federal, state, and local laws. Used petroleum products may be recycled through re-refining processes. SECTION IX - SPECIAL PROTECTION INFORMATION EYE PROTECTION: Sufficient to avoid direct contact. SKIN PROTECTION: Protective neoprene or plastic gloves may be desired. RESPIRATORY PROTECTION: VENTILATION: OTHER: Usually not needed. SECTION X - SPECIAL PRECAUTIONS Close containers when not in use. Keep away from heat, sparks, open flames, and strong oxidants. Avoid eye contact and prolonged skin contact. Avoid breathing oil mists. Wash thoroughly after handling. SECTION XI - HAZARD RATINGS There are several recognized and accepted systems that assign hazard ratings to materials. Although this product has not been evaluated specifically against these systems, the ratings for the National Fire Protection Association (NFPA) and the National Paint and Coatings Association's Hazardous Material Identification System (HMIS) are: NFPA HMIS Health 2 1 Flammability 1 1 Reactivity All-Purpose Hydraulic Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 2

7 LUBRICATION ENGINEERS, INC. P.O. Box 7128 FORT WORTH, TX MATERIAL SAFETY DATA SHEET SECTION I - PRODUCT IDENTIFICATION SUPPLIER: EMERGENCY TELEPHONE NUMBERS.: Lubrication Engineers, Inc. Company: (817) P.O. Box 7128 In the event of an emergency spill, fire, or exposure Call: Fort Worth, TX Chemtrec: (Within USA) (800) (Outside USA call collect) (703) CHEMICAL NAME AND SYNONYMS: TRADE NAME AND SYNONYMS: 4934 All-Purpose Hydraulic Oil CHEMICAL FAMILY: Hydrocarbon FORMULA: SECTION II - TYPICAL CHEMICAL AND PHYSICAL PROPERTIES APPEARANCE: 210 F, 100 C, cst Dark amber lubricant ODOR: 100 F, 40 C, cst Lube oil odor RELATIVE DENSITY: SOLUBILITY IN WATER: PH: 6-8 (Air=1) >1 Negligible MELTING POINT: F POUR POINT: F -17 BOILING POINT: F FLASH POINT: F (Method) > (C.O.C.) VAPOR PRESSURE: SPECIFIC GRAVITY: (H 2 O=1) (mm 60 F) < SECTION III - INGREDIENTS WT PCT TLV ORAL DERMAL (APPROX) LD 50 LD 50 HAZARDOUS INGREDIENTS: Oil Mist (mineral) > mg/m 3 -TWA Unknown Unknown Zinc dialkyldithiophosphate Unknown Unknown Unknown NON-HAZARDOUS INGREDIENTS: ADDITIVES AND/OR OTHER INGREDIENTS: This product is a mixture. The specific chemical identity of hazardous ingredients and non-hazardous ingredients, their C.A.S. numbers and their exact percent of composition are proprietary to Lubrication Engineers, Inc. and are being withheld as Trade Secrets. The above listing of hazardous ingredients discloses the properties, approximate concentration and known toxicological effects of the hazardous ingredients. This material is an automotive/industrial lubricant with a low order of toxicity and irritancy. The product is formulated with ingredients that are not designated as harmful to the ozone. REGULATORY INFORMATION: SARA Title III: This product does not contain any chemical substance on the SARA Extremely Hazardous Substances list. If this product contains any chemicals that are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372, they will be listed in the above HAZARDOUS INGREDIENTS section. TSCA: This material is in compliance with the Toxic Substances Control Act (15 USC ) and all components of this product appear on the Toxic Substance Control Act (TSCA) inventory list. Clean Air Act: No ozone depleting chemicals listed in Title VI, Stratospheric Ozone Protection, Section 602 of the Clean Air Act are present or used in the manufacturing process of this product. SECTION IV - FIRE AND EXPLOSION HAZARD DATA FLASH POINT: F (Method) FLAMMABLE LIMITS: LEL UEL 470(C.O.C.) Unknown EXTINGUISHING MEDIA: Foam, dry chemical, water fog, or carbon dioxide SPECIAL FIRE FIGHTING PROCEDURES: Do not direct a solid stream of water into fire. Treat as a petroleum oil fire. Respiratory protection required for fire fighting personnel. UNUSUAL FIRE AND EXPLOSION HAZARDS: None SECTION V - HEALTH HAZARD DATA THRESHOLD LIMIT VALUE: (If Established) Not established. Oil mist = 5mg/m 3 EFFECTS OF OVEREXPOSURE: Although there are no consistent primary routes of entry, the product may cause mild dermatitis upon prolonged contact and is expected to be an eye and lung irritant. Any existing skin, eye, or lung irritation may be aggravated by direct contact. No components are listed on OSHA, I.A.R.C., or N.T.P. lists for carcinogens. SECTION VI - EMERGENCY AND FIRST AID PROCEDURES EYE CONTACT: Flush immediately with water until irritation subsides. SKIN CONTACT: Wash affected skin area with mild soap and water. INGESTION: Do not induce vomiting. Contact a physician. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Contact a physician. SECTION VII - REACTIVITY DATA STABILITY: (Thermal, Light, Etc.) CONDITIONS TO AVOID: 4934 All-Purpose Hydraulic Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 1

8 Stable Contact with nuclear radiation and strong oxidizing materials. INCOMPATIBILITY: (Materials to avoid) Strong oxidizing materials. HAZARDOUS DECOMPOSITION PRODUCTS: Dense smoke; oxides of C, S, Zn and P; hydrogen sulfide. HAZARDOUS POLYMERIZATION: Will not occur. SECTION VIII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Treat as a petroleum oil spill. WASTE DISPOSAL METHOD: Incinerate where permitted under federal, state, and local laws. Used petroleum products may be recycled through re-refining processes. SECTION IX - SPECIAL PROTECTION INFORMATION EYE PROTECTION: Sufficient to avoid direct contact. SKIN PROTECTION: Protective neoprene or plastic gloves may be desired. RESPIRATORY PROTECTION: VENTILATION: OTHER: Usually not needed. SECTION X - SPECIAL PRECAUTIONS Close containers when not in use. Keep away from heat, sparks, open flames, and strong oxidants. Avoid eye contact and prolonged skin contact. Avoid breathing oil mists. Wash thoroughly after handling. SECTION XI - HAZARD RATINGS There are several recognized and accepted systems that assign hazard ratings to materials. Although this product has not been evaluated specifically against these systems, the ratings for the National Fire Protection Association (NFPA) and the National Paint and Coatings Association's Hazardous Material Identification System (HMIS) are: NFPA HMIS Health 2 1 Flammability 1 1 Reactivity All-Purpose Hydraulic Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 2