Technical Application Guide for UP-SHINE LED Downlight

Transcription

1 Technical Application Guide for UP-SHINE LED Downlight UP-CL W

2 Introduction CL81 Mini downlight is a perfect combination of traditional halogen and its installation fixture. With 7mm standard cutout size. It shares fashinable design and elegant workmanship, PC diffuser and reflector comes with an integrated design, break tradition of glass diffuser and reflector assembling, maximally reduce potential danger of glass broken. Outer trim and heatsink also come with an integrated part, aim at increasing thermal dissipation area, front surface is 6 degree rotary with a larger lighting area. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours Triac dim 15 /24 /38 /6 wide beam angle 68-74mm cutout CCT: 27K 3K 4K 5K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas it is suitable for varies residential lighting and commercial lighting applications, such as home, hotel, office, basement etc. Certificate SAA

3 Product Information Ø Technical Specifications Model Driver data Sheet Driver data DIM Non dim Input rated Voltage AC23V AC23V Frequency 5Hz 5Hz Input Voltage AC2-24V AC2-24V Efficiency 72% 8% Total load Wattage 7W±.5W 7W±.5W Power Factor Rated input current.5a.1a Full load output Voltage DC35-4V DC27-4V Rated output current 14mA 15mA Output current range 14mA±5% 15mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 1%-1% ---- Dimmer Triac dimmers ---- Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS THD 4% 2% Withstand voltage AC375V AC375V Fixture Compatibility Rated Wattage Voltage Power Power Factor Electrical Classification Lumen (±5%) Beam angle Ingress Protection CCT Lifespan CRI Dimmable Dimension UP-CL W 23V 7W /24 /38 /6 27K 4h 8 No Ø81*54mm cutout 68-74mm UP-CL W 23V 7W /24 /38 /6 3K 4h 8 No Ø81*54mm cutout 68-74mm UP-CL W 23V 7W /24 /38 /6 4K 4h 8 No Ø81*54mm cutout 68-74mm UP-CL W 23V 7W /24 /38 /6 5K 4h 8 No Ø81*54mm cutout 68-74mm UP-CL W-D 23V 7W /24 /38 /6 27K 4h 8 Yes Ø81*54mm cutout 68-74mm UP-CL W-D 23V 7W /24 /38 /6 3K 4h 8 Yes Ø81*54mm cutout 68-74mm UP-CL W-D 23V 7W /24 /38 /6 4K 4h 8 Yes Ø81*54mm cutout 68-74mm UP-CL W-D 23V 7W /24 /38 /6 5K 4h 8 Yes Ø81*54mm cutout 68-74mm Operating Temp Operating Humidity Storage Temp 7W Ⅱ IP2-2 o C~45 o C ~9% -2 o C~65 o C Ø81

4 Spectral Distribution 27K 3K.8 Max=6182 [1.=2] 2.56 SDCM F27K.8 Max=5875 [1.=2] 2.62 SDCM F3K x=.4648 y= x=.4428 y= K 5K Max=6963 [1.=2] 3.14 SDCM F4K.8 Max=159 [1.=2] SDCM F5K x=.3867 y= x=.358 y= Photometric Diagram 27K 3K / MH=1m C/18 C9/27 Flux out: lm / MH=1m C/18 C9/27 Flux out: lm AVERAGE BEAM ANGLE(5%): 38.2 DEG Height Eavg, Emax Angle: 38.25deg Diameter AVERAGE BEAM ANGLE(5%): 37.7 DEG Height Eavg, Emax Angle: 37.6deg Diameter 4K 5K / MH=1m C/18 C9/27 Flux out: lm / MH=1m C/18 C9/27 Flux out: 296. lm AVERAGE BEAM ANGLE(5%): 38.5 DEG Height Eavg, Emax Angle: 38.55deg Diameter AVERAGE BEAM ANGLE(5%): 37.9 DEG Height Eavg, Emax Angle: 38.68deg Diameter

5 Polar Diagram Comparison -15 O -/+18 O 15 O -12 O 12 O -9 O 9 O -6 O O -3 O 3 O O AVERAGE BEAM ANGLE (5%): 37.9 DEG C/18, 38.8 deg C3/21, 38. deg C6/24, 37.4 deg C9/27, 37.4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 1 Temperature ( o C) IC Capacitor MOS LED Fitting :34:57 14:46:53 14:58:53 15:1:53 15:22:53 15:34:53 15:46:53 15:58:53 16:1:53 Time 16:22:53 16:34:53 16:46:53 16:58:53 17:1:53 17:22:53 17:34:53 17:46:53 Transformer Environmental temperature The driver lifespan is based on capacitor working temperature.

6 Installation Building material above fitting A-gap above the fitting Install requirements 25mm Building material or thermal insulation Building material B-gap to the building material 25mm C-gap to the thermal insulation 25mm Ceiling Opening Connect Power supply Spring Clips 1 2 A. Hold back spring clips Finish B. Push downlight into position Spring Clips Ceiling 3 4 Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 46*46* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China