Dr. P. M. Ardhapurkar

Transcription

1 Dr. P. M. Ardhapurkar Professor and Head Department of Mechanical Engineering, MGI-COET, Shegaon (MS), India Mobile: QUALIFICATION Ph.D. (IIT Bombay, Mumbai) M.E. (Government College of Engg., Amravati) B.E. (Government College of Engg., Amravati) AREA OF SPECIALISATION CURRENT AREA OF RESEARCH Thermal Engineering Cryogenic Heat Exchangers Joule-Thomson Cryocooler Mixed Refrigerants Energy Efficient Thermo-Hydraulic systems Computational Fluid Dynamics EXPERIENCE Total: 23 Years (Teaching: 18 Years, Industrial: 02 Years, Research: 03 Years) Ph.D. THESIS Investigations on two-phase heat exchanger for mixed refrigerant Joule Thomson cryocooler COURSES TAUGHT Heat Transfer Refrigeration and Air Conditioning Fluid Power-I Fluid Power-II Energy Conversion-I I.C. Engines Power Plant Engineering-II RESEARCH WORK SCOPUS Author ID: ORCID ID: orcid.org/ Researcher ID: B PUBLICATIONS International Journals 1. R. M. Damle, P. M. Ardhapurkar, M. D. Atrey. Numerical investigation of transient behavior of the recuperative heat exchanger in a MR J T cryocooler using different heat transfer correlations, Cryogenics, 80 Part 1 (2016) pp R. M. Damle, P. M. Ardhapurkar, M. D. Atrey. Numerical analysis of the two-phase heat transfer in the heat exchanger of a mixed refrigerant Joule Thomson cryocooler, Cryogenics, 72 (2015) pp

2 PUBLICATIONS 3. P. M. Ardhapurkar, M. D. Atrey. Performance optimization of a miniature Joule Thomson cryocooler using numerical model, Cryogenics, 63 (2014) pp P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey. Performance evaluation of heat exchanger for mixed refrigerant J T cryocooler, Cryogenics, 63 (2014) pp P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey. Flow boiling heat transfer coefficients at cryogenic temperatures for multicomponent refrigerant mixtures of nitrogen hydrocarbons, Cryogenics, 59 (2014) pp P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey. Experimental investigation on temperature profile and pressure drop in two-phase heat exchanger for mixed refrigerant Joule- Thomson cryocooler, Applied Thermal Engineering, 66 (2014) pp P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey, Investigation of pressure drop in capillary tube for mixed refrigerant Joule- Thomson cryocooler, Advances in Cryogenic Engineering, 59 A, (2014) pp P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey, Investigations on two-phase heat exchanger for mixed refrigerant Joule-Thomson cryocooler Advances in Cryogenic Engineering, Vol. 57A, (2012) pp G.K. Awari, P. M. Ardhapurkar, D. G. Wakde, L. B. Bhuyar, Performance Analysis of Air-Lift Pump Design, I MECH E Part C- Journal of Mechanical Engineering Science, Vol. 218, (10), 2004, pp National Journals 10. Nupura Ravishankar, P. M. Ardhapurkar, M. D. Atrey, Prediction of differential Joule-Thomson inversion curves for cryogens using equations of state, Indian Journal of Cryogenics, Vol. 41 (1), pp , 2016, ISSN: P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey, Prediction of temperature distribution in heat exchanger for mixed refrigerant Joule Thomson cryocooler, Indian Journal of Cryogenics, Vol. 39 (1), pp , 2014, ISSN: Ritu Gavasane, P. M. Ardhapurkar, M. D. Atrey, Prediction of thermo-physical properties of Argon at cryogenic conditions using modified Benedict-Webb-Rubin equation of state, Indian Journal of Cryogenics, Vol. 39 (1), pp , 2014, ISSN: P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey, Thermodynamic studies on mixed refrigerant J-T cryocooler heat exchanger, Indian Journal of Cryogenics, Vol. 36, No. (1-4), pp , 2011, ISSN: CONFERENCE International conferences 14. R. M. Damle, P. M. Ardhapurkar, M. D. Atrey. Numerical simulation of tubes-in-tube heat exchanger in a mixed refrigerant Joule Thomson cryocooler, 26 th International Cryogenic Engineering Conference (ICEC26-ICMC 2016) organized by Inter University

3 Accelerator Center (IUAC), Delhi and Indian Cryogenics Council (ICC) held at Manekshaw Center, New Delhi, March 7 11, Arvind A. Dev, P. M. Ardhapurkar, Numerical analysis of a miniature helically coiled heat exchanger, Proceedings of the 23rd National Heat and Mass Transfer Conference and 1st International ISHMT- ASTFE Heat and Mass Transfer Conference (IHMTC2015) December, 2015, Thiruvananthapuram, India, IHMTC P. M. Ardhapurkar, M. D. Atrey. Prediction of two-phase pressure drop in heat exchanger for mixed refrigerant Joule-Thomson cryocooler, Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC-ICMC 2015), Tucson, Arizona, USA, June 28 July 2, IOP Conference Series: Materials Science and Engineering, Vol. 101(1), Arvind A. Dev, P. M. Ardhapurkar, Numerical analysis of multistream cross-counter flow heat exchanger using computational fluid dynamics, International conference on recent advances in Mechanical Engineering (ICRAME 2015) held at G. H. Raisoni College of Engineering and Management, Pune, February 26-28, D. S. Pachpor, P. M. Ardhapurkar, Productivity improvement of glycerin soap processing plant- A case study, International conference on recent advances in Mechanical Engineering (ICRAME 2015) held at G. H. Raisoni College of Engineering and Management, Pune, February 26-28, P. V. Bhale, P. M. Ardhapurkar, N. V. Deshpande, Experimental Investigations to study the comparative effect of LPG and Gasoline on Performance and Emissions of SI Engine, ICES , Proceedings of ICES 2005 ASME Internal Combustion Engine Division, 2005 Spring Technical Conference, April 5-7, 2005, Chicago, IL, USA, ISBN: , pp P. M. Ardhapurkar, A. M. Mahalle, Energy Auditing A Systematic Search for an Energy Conservation Opportunities, Proceedings of the International Conference on Recent Advances in Mechanical and Materials Engineering (ICRAMME 2005), May 30-31, 2005, Kuala Lumpur, Malaysia, ISBN: , pp G. K. Awari, P. M. Ardhapurkar, D.G. Wakde, An Experimental Analysis of Two Phase Flow for Air Lift Pump Design, 5th International Conference on Advances in Fluid Mechanics, on March 22-24, 2004, proceedings Advances in Fluid Mechanics, Vol. 40, 2004, ISBN: , pp P. M. Ardhapurkar, H. R. Saboo, G. K. Awari, Reduction in Energy Consumed through an Energy Audit of a Biscuit Manufacturing Plant, Proceeding of International Conference on Energy and Environmental Technologies for Sustainable Development held at Malviya National Institute of Technology, Jaipur, (India), Nov. 8-10, 2003, pp

4 National conferences 23. P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey, Effect of heat exchanger on thermo-hydraulic performance of mixed refrigerant Joule-Thomson cryocooler, 25 th National Symposium on Cryogenics (NSC -25) held at Hyderabad University, Hyderabad, during December 8-10, A. Markan, P. M. Ardhapurkar, M. D. Atrey, Design of a cryopreservation chamber using mixed refrigerant Joule-Thomson cryocooler technology, 25 th National Symposium on Cryogenics (NSC -25) held at Hyderabad University, Hyderabad, during December 8-10, P. M. Ardhapurkar, Arunkumar Sridharan, M. D. Atrey, Performance study on helical coil heat exchanger for mixed refrigerant J-T cryocooler, Mechanical Engineering Graduate Research Symposium 2014 (MEGRES 2014), held at IIT Bombay, January 11, 2014, pp H. R. Saboo, P. M. Ardhapurkar, S. H. Wankhade, Enhancing Dehumidification with Heat Pipes for Air Conditioning- An Energy Conservation Technique in National Seminar on Renewable Energy Sources and other Technologies for Rural Development RESTRD held at SSGMCE Shegaon, March 9-10, 2002, pp J. Varghese, G. K. Awari, P. M. Ardhapurkar, Reduction of Pollutants in C.I. Engine by Introduction of Heat Exchanger, in Proceedings of National Conference on Control of Industrial Pollution and Environmental Degradation, organized by PSG College of Technology, Coimbatore, Sep , 2001, pp INVITED LECTURES 1. Lecture on Cryogenics, College of Engineering and Technology, Akola, (October 3, 2015). 2. Lecture on Cryogenic Heat Exchangers (CHE), in Two-week STTP on Advances in Heat Transfer, Fluid Mechanics and Mass Transfer, JDIET, Yavatmal, (December 2-11, 2013). 3. Lecture on Two-phase Heat Exchangers in the CEP Short term course on Advances in Cryocooler Technology organized by IIT Bombay, Mumbai (October 21-25, 2013). 4. Lecture on Gas mixture property data using Aspen/Refprop in the CEP Short term course on Advances in Cryocooler Technology organized by IIT Bombay, Mumbai (October 21-25, 2013). 5. Lecture on Thermo physical properties of fluids and mixtures in the CEP Short term course on Advances in Cryocooler Technology organized by IIT Bombay, Mumbai (May 02-06, 2011). 6. Lecture in the two-day workshop on Computational Fluid Dynamics organized at SSGMCE, Shegaon, (March 30-31, 2009). 7. Lecture on Computational Fluid Dynamics in the Staff Development Program sponsored by AICTE, New Delhi and organized by Department of Mechanical Engineering, SSGMCE, Shegaon (March 26 to April 6, 2007). 8. Lecture on Energy conservation and Management in the STTP sponsored by AICTE, New Delhi and ISTE, New Delhi, organized by Department of Electrical Engineering, Government Polytechnic, Yevatmal (MS) (December 6 17, 2004).

5 ABROAD CONFERENCES Paper presentation in International conference on cryogenics (CEC- ICMC 2015) Tucson, Arizona, USA (June 28 July 2, 2015). Paper presentation in International conference on cryogenics (CEC- ICMC 2011) Spokane, Washington, USA (June 13-17, 2011). INDUSTRIAL TRAININGS Industrial Training Programme for Faculty under the scheme of Industry Education Partnership Cell (IEPC) at Siemens, Nashik (May 29- June 1, 2006). Programme on Steam Engineering and Energy Conservation for Engineering College faculty at Forbes Marshall, Pune (June 21-23, 2001). INDUSTRIAL PROJECTS MEMBERSHIP OF SCIENTIFIC AND PROFESSIONAL BODIES Productivity improvement in glycerin soap processing unit at Yash Enterprise, MIDC Khamgaon, ( ). Thermal Energy Auditing at Marico Ltd. Jalgaon, ( ). Energy Auditing at Raymond Ltd. Chhindwara (MP), ( ). Layout and Facilities for continuous production of Brahma (Bullock driven sprayer) at Padsons Industries Pvt. Ltd. Akola, ( ). Design and positioning of accelerator and braking system for Sector-M&M Vehicle at Mahindra & Mahindra, Nagpur ( ). Disposal of solid waste and its effective utilization- A case study at Gujrat Heavy Chemicals Ltd. ( ). Design and fabrication of hydraulic power pack, CNC Engineers and Technical consultants, Ghaziabad, ( ). Design of Dehumidifier for VK3-200 blow moulding Machine at National Organic Chemical Industries Ltd. (NOCIL), Akola, ( ). Indian Cryogenic Council (Life Member: LM 669) SAE India (Member, No ) Indian Society for Technical Education (Life Member: LM 22274) The Combustion Institute (Life Member, LMC 998) Indian Society of Mechanical Engineers (ISME) (Life Member: L 1096)