Ambient Dust Sampling

Transcription

1 Air/ Dust Ambient Dust Sampling Dust Deposit Gauge A low cost dust gauge that measures dust deposition, i.e. dust falling from the sky and is measured in milligrams per square meter per day (mg/m 2 /day) Anodized aluminium frisbee-type collector with 227mm diameter aperture Large capacity collecting bottle will accommodate 120mm rain (240mm with the 10-litre bottle) and has wide neck permitting easy access for cleaning and removal of Polyester foam dust trap Spare dust trap and bottle Sticky pad adapter for determining prevailing direction Bird guard reduces risk of polluted samples from bird strikes Tripod base, which can be spiked down, ensures stability on uneven surfaces Weight approx. 8kg EN EN EN Dust Deposit Gauge Dust Deposit Gauge-Frisbee Type-Complete Kit with sticky pad adapter and 2 x 5 litre bottles. Spare HDPE Bottle-5litre-with standard cap A low cost dust gauge that measures dust flux, ie the horizontal component of wind-blown dust and is measured in milligrams per square meter per day (mg/m 2 /day). The unit complies with BS1747 part5. 4 x 1000ml HDPE collecting bottles with internal seal 1 x 600ml wash bottle 4 spare collecting bottles Calibration data Overall height 1.6m, weight approx 14kg EN EN Spare Foam Particle Trap Directional Dust Gauge, complete kit Spare Collecting Bottle for Directional Dust Gauge EN EN

2 Air/ Dust Water Quality Soil/ Soil Sedi- / Sam- & EN Air Sampling Pump This highly versatile air sampling pump provides high-performance sampling for asbestos and other particulates. The unit is enclosed in a robust steel casing, a front mounted power socket to provide easy access for charging or powering, and a sturdy handle for easy portability. Use the fully programmable timer to set a manual run, a timed run with or without delayed start, or intermittent sampling. Ideal for: area and environmental monitoring, bio-aerosol sampling, indoor air studies, asbestos monitoring, long term background monitoring, and stack sampling Wide flow range: 2 to 26 L/min to free air Fully programmable Manual run Timed run and delayed start Intermittent sampling Robust steel casing with sturdy handle for easy portability Long run times High-performance sampling capabilities Convenient front mounted power socket Battery or mains AC operation Flow fault feature ensures sample integrity Run time display is retained during fault Operating temperature: -5 to 50 o C Weight: 6.9kg Size 18 x 11 x 20 cm EN EN Air Sampling Pump, 2-26 litres / min, supplied complete with rechargeable battery, charger & 1m tubing Aluminium Sampling Mast, 1m Air / Dust EN EN EN mm Open Face Sampling Head G.F / A filters for general sampling of Inhalable and Respirable dusts 25mm, pkt 100 Rotameter L/min, calibration accuracy Class 2.5 VDI / VDE EN General Dust Kit Designed for personal monitoring in work areas this kit will help you to maintain a record of dust levels in the workplace at minimal cost. Rotameter and stand, I.O.M sampling head with cassette, tweezers, accessory container, all in a plastic carry case. EN General Dust Kit EN GFA Pre-Weighed Filters 25mm (Pkt of 10) 107

3 Air/ Dust Ambient Dust Hand Held Airborne Particulate Monitor The Handheld Airborne Particulate Monitor is a small and compact instrument that can be used to study short to long term monitoring of airborne dust particles in both indoor and outdoor environments. Real time air quality monitoring Simultaneous TSP, PM10, PM2.5 and PM1 monitoring Ideal for portable workplace monitoring of atmospheric dust Detector Standard inlet Environmental mode Range limit Particle size range Flow Rate Internal Memory Dimensions, mm / weight, kg EN Handheld Airborne Particulate Monitor, supplied with battery pack, charger, PC cable, software, spare filters, and carrying case. Airborne Particulate Monitor Airborne Particulate Monitor is a small and compact instrument that can be used to study short to long term monitoring of airborne dust particles. The particulate monitor can be used effectively to determine particle concentration in the local area along with wind speed and direction. Real time air quality monitoring Simultaneous TSP, PM10, PM2.5 and PM1 monitoring Multiple units can be installed in networks EN EN EN EN Laser nephelometer TSP (1mm stainless mesh) TSP, PM10, PM2.5, PM1.0 0 to 6000 micrograms per cubic meter 0.01 micrograms per cubic meter 0.5 to 20 micron diameter 600cc per minute 32kB Rechargeable battery 160 x 100 x 100, 1.2 Detector Laser nephelometer Standard inlet TSP (1mm stainless mesh) Heated inlet Heating to 60 C Environmental mode TSP, PM10, PM2.5, PM1.0 Range 0 to 6000 micrograms per cubic meter limit 0.01 micrograms per cubic meter Particle size range 0.5 to 20 micron diameter Flow Rate 600cc per minute Alarm to phone or Internal memory 128kB Rechargeable battery Dimension, mm / weight, kg 260 x 160 x 150 / 11.8 Airborne Particulate Monitor, includes lamp post box, battery, charger, PC cable, software, and spare filters Anemometer GSM / GPRS modem Solar Panel Kit EN EN EN

4 Air/ Dust Water Quality Soil/ Soil Sedi- / Sam- & Air / Dust EN Portable Ambient Air Sampler (PAAS) The Portable Ambient Air Sampler (PAAS) is an air sampler for particulate matter. The patented low flow technology used in the PAAS was developed with the USEPA in an effort to address the need for portable air pollution sampling technology. Whilst not a reference method sampler, the PAAS gives results that closely approximate reference method air quality data. Both accurate and precise, the battery operated, lightweight PAAS is ideal for sampling at remote sites or areas without power. In addition, the low cost of the sampler allows a network of PAAS to be deployed at a fraction of the cost for a similar reference station network. The PAAS features a 7-day programmable timer, a constant flow control system, an elapsed time totaliser, rechargeable battery packs, and all-weather PVC enclosure. The PAAS can separately sample particulate matter in the TSP, PM10, and PM2.5 range. Pump Timer Pre-separator / Cassette Filter Holder Assembly Electronics Battery Pack Enclosure EN Double-diaphragm with laminar flow valve technology Rated for 10,000 hours continuous operation Flow range 0-10 Litres / min Up to six sample periods per day Easily removed for cleaning Standard 47mm filter holder Nominal 10 micron or 2.5 micron cut-point at 5 litres / minute sample rate AC or DC operation Variable flow adjustment Elapsed time totaliser Low battery indicator and shut-off Low flow rate indicator and shutoff 14.8V / 118 Watt Hours 1.2 amp external battery charger, VAC, 47-63Hz, Full recharge in less than 6 hours Dimensions: 25 x 30 x 18cm Weight: less than 5kg fully configured All-in-one transport case Dimensions: 50 x 30 x 46cm Weight: less than 18kg with all accessories Portable Ambient Air Sampler for TSP & PM-10 sampling includes: Pump Module, 2 x PM-10 Impactors, 2 x Louvered Inlets, 2 x Filter Holder Assemblies, 2 x Battery Packs, Battery Charger, Universal Mounting Bracket, and an all-weather transport case. EN Portable Ambient Air Sampler for TSP, PM10 & PM-2.5 sampling includes; Pump Module 2 x PM-10 Impactors, 2 x PM-2.5 Impactors, 2 x Multiple Impactor Adapters, 2 x Louvered Inlets, 2 x Filter Holder Assemblies, 2 x Battery Packs, Battery Charger, Universal Mounting Bracket, and an all-weather transport case EN Fibre film filters, recommended for PM10 gravimetric analysis, 47mm dia, pack of 50 EN Pure Teflon filters, recommended for PM2.5 gravimetric analysis, 47mm dia, pack of 50 EN Quartz filters, alternative to Teflon filters, 47mm dia, pack of 100 EN Petrislides, plastic cassettes for shipping and storage of filters, pack of 100 EN Field Calibration Kit w / Digital Manometer EN Solar Panel Assembly for Portable Ambient Air Sampler 109 Telephone: +44 (0)1635 Telephone:

5 Air/ Dust Micro Balance Ideal for weighing dust samples this micro balance is equipped with a high performance force compensation weigh cell that is very precise, but also exceptionally reliable and durable. The built-in, motorized calibration weight activates by the touch of a key and activates automatically when the ambient temperature changes by a specific value. The internal ionizer neutralizes electrostatically charged objects instantly, which removes errors caused by static electricity. The balance automatically adjusts its response characteristics (FAST, MID, or SLOW) by analyzing the influence of drafts or vibrations on the stability of the display value. Built in Fanless Ionizer Interlockable Sliding Doors Internal Calibration Mass Automatic Response Adjustment Reverse Backlit LCD Display Twelve weighing units GLP / GMP / GCP / ISO compliant output Data memory function RS-232C and Quick USB interfaces as standard Counting mode Automatic Counting Accuracy Improvement (ACAI) Percent mode function Comparator function with buzzer Auto power on function Underhook function Density determination function Built-in temperature, humidity & atmospheric pressure sensors Special pans and holder for dust particulate filter weighing EN Capacity Minimum Capacity Readability Resolution Repeatability (std. deviation) Linearity Pan Size EN EN EN g / 22g 0.004mg (for 1g) / 0.01mg +/-: 0.010mg / 0.02mg 25mm Ø 220 / 240VAC 50 / 60Hz mains adapter Micro Balance, dual range, capacity 5.1g x 0.001g and 22g x 0.01g, includes weighing pan for 50 and 95mm dia dust filters Anti Table Table Top Breeze Break Note: Unable to locate the precise instrument you require? Please contact us for expert advice. 110