Technical Application Guide for UP-SHINE LED Downlight

Transcription

1 Technical Application Guide for UP-SHINE LED Downlight UP-DL54-3-1W

2 Introduction SMD LED Down light adopts high lumen SMD LED, PC diffuser with even light output. V fire rated plastic housing with internal driver design; it is our most economical and practical downlight version. Dimmable version available, it shares great popularity by the excellent dimming effect. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours Dimmable when using triac dimmer 9 wide beam angle 9-95mm cutout CCT: 3K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate

3 Product Information 61 Ø115 Ø86.5 Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-DL54-3-1W AC1-24V 1W o 3K 4h 8 No Ø115*61mm cutout 9-95mm UP-DL54-3-1W AC1-24V 1W o 4K 4h 8 No Ø115*61mm cutout 9-95mm UP-DL54-3-1W AC1-24V 1W o 5K 4h 8 No Ø115*61mm cutout 9-95mm UP-DL54-3-1W AC1-24V 1W o 57K 4h 8 No Ø115*61mm cutout 9-95mm UP-DL54-3-1W-D AC23V 1W o 3K 4h 8 Yes Ø115*61mm cutout 9-95mm UP-DL54-3-1W-D AC23V 1W o 4K 4h 8 Yes Ø115*61mm cutout 9-95mm UP-DL54-3-1W-D AC23V 1W o 5K 4h 8 Yes Ø115*61mm cutout 9-95mm UP-DL54-3-1W-D AC23V 1W o 57K 4h 8 Yes Ø115*61mm cutout 9-95mm Driver data Sheet Driver data DIM Non-DIM Input rated Voltage AC23V AC1-24V Frequency 5Hz 5/6Hz Input Voltage AC2-24V AC85-265V Efficiency 83% 84% Total load Wattage 1W±1W 1W±1W Power Factor.9.9 Rated input current.6a.12a Full load output Voltage 35-38V 35-38V Rated output current 23mA 23mA Output current range 23mA±5% 23mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 1%-1% Dimmer Triac dimmers Withstand voltage AC375V AC375V Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 1W Ⅱ IP2-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution 3K 4K.8 Max=869 [1.=2] 3.4 SDCM F3K.8 Max=822 [1.=2] 4.21 SDCM F4K x=.4463 y= x=.389 y= K 57K.8 Max=11139 [1.=2] 2.7 SDCM F5K.8 Max=676 [1.=2] 4.91SDCM F57K x=.351 y= x=.3316 y= Photometric Diagram 3K 4K / MH=1m C/18 C9/27 Flux out: lm / MH=1m C/18 C9/27 Flux out: lm AVERAGE BEAM ANGLE(5%): 98.9 DEG Height Eavg, Emax Angle: 97.73deg Diameter AVERAGE BEAM ANGLE(5%): 99. DEG Height Eavg, Emax Angle: 97.76deg Diameter 5K 57K / MH=1m C/18 C9/27 Flux out: lm / MH=1m C/18 C9/27 Flux out: 64.1 lm AVERAGE BEAM ANGLE(5%): 99.6 DEG Height Eavg, Emax Angle: 98.42deg Diameter AVERAGE BEAM ANGLE(5%): 99. DEG Height Eavg, Emax Angle: 98.29deg Diameter

5 Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 9 O O 24 6 O 32-3 O 4 3 O O AVERAGE BEAM ANGLE (5%): 99.DEG C/18, 98.9 deg C3/21, 99. deg C6/24, 99.1 deg C9/27, 99. deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :13:13 11:25:1 11:37:1 11:49:1 12:1:1 12:13:1 12:25:1 12:37:1 12:49:1 13:1:1 13:13:1 13:25:1 13:37:1 13:49:1 14:1:1 14:13:1 14:25:1 14:37:1 14:49:1 15:1:1 15:13:1 15:25:1 15:37:1 15:49:1 16:1:1 16:13:1 16:25:1 16:37:1 Time IC Capacitor MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.

6 Installation Install requirements Building element above fitting A-gap above the fitting B-gap to the building material C-gap to the thermal insulation 25mm 25mm 25mm Building material or thermal insulation C A B Building structural membrance Ceiling Opening Connect Power supply Spring Clips 1 2 A. Hold back spring clips Spring Clips Ceiling B. Push downlight into position 3 4 Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 39*26.5* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China