SAFETY DATA SHEET according to Regulation (EU) 2015/830

Transcription

1 SAFETY DATA SHEET according to Regulation (EU) 205/830 Page /5 date SECTION : Identification of the substance/mixture and of the company/undertaking.. Product identifier Product name.2. Relevant identified uses of the substance or mixture and uses advised against Description Building chemical..3. Details of the supplier of the safety data sheet Company Address Web SEAL IT SERVICES LTD T/A BOND IT Unit G6 Riverbank Way, Lowfields Business Park, Elland, West Yorkshire HX5 9DN Telephone Fax address of the competent person.4. Emergency telephone number sales@bond-it.co.uk philradford@bond-it.co.uk Emergency telephone number SECTION 2: Hazards identification 2.2. Label elements 8.30AM PM Mon-Fri Risk phrases No Significant Hazard 2.3. Other hazards Other hazards SECTION 3: Composition/information on ingredients SECTION 4: First aid measures 4.. Description of first aid measures Inhalation Move the exposed person to fresh air. Rinse immediately with plenty of water for 5 minutes holding the eyelids open. Wash off immediately with plenty of soap and water. Remove contaminated clothing. DO NOT INDUCE VOMITING Most important symptoms and effects, both acute and delayed

2 2/5 date 4.2. Most important symptoms and effects, both acute and delayed Inhalation May cause irritation to mucous membranes. May cause irritation to eyes. May cause irritation to skin. May cause irritation to mucous membranes Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.. Extinguishing media Use extinguishing media appropriate to the surrounding fire conditions Special hazards arising from the substance or mixture Burning produces irritating, toxic and obnoxious fumes Advice for firefighters Wear suitable respiratory equipment when necessary. SECTION 6: Accidental release measures 6.. Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation of the working area Environmental precautions Do not allow product to enter drains. Prevent further spillage if safe Methods and material for containment and cleaning up 6.4. Reference to other sections Absorb with inert, absorbent material. Sweep up. Transfer to suitable, labelled containers for disposal. Clean spillage area thoroughly with plenty of water. See section 3.Disposal Considerations for further information. See section 8.PPE for further information. SECTION 7: Handling and storage 7.. Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities 7.3. Specific end use(s) Avoid contact with eyes and skin. Ensure adequate ventilation of the working area. Adopt best Manual Handling considerations when handling, carrying and dispensing. Keep in a cool, dry, well ventilated area. Keep containers tightly closed. Store in correctly labelled containers. Building chemical. SECTION 8: Exposure controls/personal protection 8.. Control parameters 8.2. Exposure controls Appropriate engineering controls Ensure adequate ventilation of the working area.

3 3/5 date 8.2. Exposure controls Individual protection measures Eye / face protection Wear protective clothing. In case of splashing, wear:. Approved safety goggles. SECTION 9: Physical and chemical properties 9.. Information on basic physical and chemical properties Appearance Paste Colour Odour Odour threshold ph Melting point Freezing Point Initial boiling point Flash point > 00 C Evaporation rate Flammability (solid, gas) Vapour pressure Vapour density Relative density (H2O 20 C) Fat Solubility Partition coefficient Autoignition temperature 9.2. Other information Viscosity Explosive properties Oxidising properties Solubility Miscible in water Conductivity Surface tension Gas group Benzene Content Lead content VOC (Volatile organic compounds) SECTION 0: Stability and reactivity 0.. Reactivity 0.2. Chemical stability 0.3. Possibility of hazardous reactions 0.4. Conditions to avoid 0.5. Incompatible materials 0.6. Hazardous decomposition products Stable under normal conditions.

4 4/5 date 0.6. Hazardous decomposition products SECTION : Toxicological information.. Information on toxicological effects Acute toxicity..4. Toxicological Information SECTION 2: Ecological information 2.. Toxicity 2.2. Persistence and degradability 2.3. Bioaccumulative potential Partition coefficient FIRE RETARDANT INTUMESCENT ACRYLIC SEALANT CLP 2.4. Mobility in soil 2.5. Results of PBT and vpvb assessment 2.6. Other adverse effects SECTION 3: Disposal considerations 3.. Waste treatment methods Dispose of as special waste in compliance with local and national regulations. SECTION 4: Transport information 4.. UN number 4.2. UN proper shipping name 4.3. Transport hazard class(es) 4.4. Packing group 4.5. Environmental hazards 4.6. Special precautions for user

5 5/5 date 4.6. Special precautions for user 4.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Further information SECTION 5: Regulatory information 5.. Safety, health and environmental regulations/legislation specific for the substance or mixture Regulations REGULATION (EC) No 907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 488/94 as well as Council Directive 76/769/EEC and Commission Directives 9/55/EEC, 93/67/EEC, 93/05/EC and 2000/2/EC Chemical safety assessment SECTION 6: Other information Other information COMMISSION REGULATION (EU) 205/830 of 28 May 205 amending Regulation (EC) No 907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH). Further information This document differs from the previous version in the following areas:. 3 - Disposal of packaging Waste treatment methods. 5 - Further information Chemical safety assessment. 5 - Regulations. The information supplied in this Safety Data Sheet is designed only as guidance for the safe use, storage and handling of the product. This information is correct to the best of our knowledge and belief at the date of publication however no guarantee is made to its accuracy. This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process.