Technical Application Guide for UP-SHINE LED Downlight

Size: px
Start display at page:

Download "Technical Application Guide for UP-SHINE LED Downlight"

Transcription

1 Technical Application Guide for UP-SHINE LED Downlight UP-DL W-D

2 Introduction Up-shine SMD LED Down light adopts high lumen SMD LED, PC diffuser with even light output. Plastic coated aluminum housing with internal driver design; it is our most economical and practical downlight version. Dimmable driver shares great popularity by the excellent dimming effect. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours Dimmable when using triac dimmer 9 wide beam angle 12-13mm cutout CCT: 3K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate SAA

3 Ø18.5 Product Information Ø145 Technical Specifications 61 Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-DL W-D AC23V 13W o 3K 4h 8 Yes Ø145*61mm cutout 12-13mm UP-DL W-D AC23V 13W o 4K 4h 8 Yes Ø145*61mm cutout 12-13mm UP-DL W-D AC23V 13W o 5K 4h 8 Yes Ø145*61mm cutout 12-13mm UP-DL W-D AC23V 13W o 57K 4h 8 Yes Ø145*61mm cutout 12-13mm Driver data Sheet Driver data Input rated Voltage Frequency Input Voltage DIM AC23V 5Hz AC2-24V Efficiency 85% Total load Wattage 13W±1W Power Factor.9 Rated input current.7a Full load output Voltage 65-78V Rated output current Output current range 14mA 14mA±5% Power tolerance ±5% Current output tolerance ±5% Dimming range 8%-1% Dimmer Short circuit protection Over voltage protection Over temperature protection Withstand voltage Fixture Compatibility Triac dimmers PASS PASS PASS AC375V Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 13W Ⅱ IP2-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution 3K 4K.8 Max=7655 [1.=2] 3.69 SDCM F3K.8 Max=8187 [1.=2] 1.58 SDCM F4K x=.4473 y= x=.3834 y= K 57K.8 Max=1141 [1.=2] 2.69 SDCM F5K.8 Max=6222 [1.=2] 2.23 SDCM F57K x=.351 y= x=.3252 y= Photometric Diagram 3K 4K / MH=1m C/18 C9/27 Flux out: lm / MH=1m C/18 C9/27 Flux out: lm AVERAGE BEAM ANGLE(5%): 99.3 DEG Height Eavg, Emax Angle: 98.36deg Diameter AVERAGE BEAM ANGLE(5%): 15.1 DEG Height Eavg, Emax Angle: 14.13deg Diameter 5K 57K / MH=1m C/18 C9/27 Flux out: lm / MH=1m C/18 C9/27 Flux out: lm AVERAGE BEAM ANGLE(5%): 98.4 DEG Height Eavg, Emax Angle: 96.98deg Diameter AVERAGE BEAM ANGLE(5%): 15.2 DEG Height Eavg, Emax Angle: 13.87deg Diameter

5 Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 9 O O 27 6 O 36-3 O 45 3 O O AVERAGE BEAM ANGLE (5%): 15.2DEG C/18, 15.2 deg C3/21, 15.1 deg C6/24, 15.1 deg C9/27, 15.2 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :13:13 11:25:1 11:37:1 11:49:1 12:1:1 12:13:1 12:25:1 12:37:1 12:49:1 13:1:1 13:13:1 13:25:1 13:37:1 13:49:1 14:1:1 14:13:1 14:25:1 14:37:1 14:49:1 15:1:1 15:13:1 15:25:1 15:37:1 15:49:1 16:1:1 16:13:1 16:25:1 16:37:1 Time IC Capacitor MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.

6 Installation Install requirements Building element above fitting A-gap above the fitting B-gap to the building material C-gap to the thermal insulation 25mm 25mm 25mm Building material or thermal insulation C A B Building structural membrance Ceiling Opening Connect Power supply Spring Clips 1 2 A. Hold back spring clips Spring Clips Ceiling B. Push downlight into position 3 4 Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 48.5*33* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China