Overview of Standard 189.1

Transcription

1 Applying ASHRAE Standards for Success Overview of Standard Don Horn, FAIA U.S. General Services Administration August 16, 2017 Tampa Convention Center Tampa, Florida

2 ANSI/ASHRAE/USGBC/IES Standard Overview of Standard 189.1, Standard for the Design of High-Performance Green Buildings What is it? Why was it created? Highlights 2

3 ANSI/ASHRAE/USGBC/IES Standard Versions (1 st released in January 2010) addenda to be added Will become the technical content for IGCC-2018 IGCC-2018 powered by Standard

4 ANSI/ASHRAE/USGBC/IES Standard Standard is: A standard Applies to all buildings except low-rise residential buildings Intended for adoption into building codes & regulations Standard is not: A design guide A rating system 4

5 ANSI/ASHRAE/USGBC/IES Standard Section 1 Purpose 1.1 The purpose of this standard is to provide minimum requirements for the siting, design, construction, and plans for operation of highperformance green buildings to a. reduce emissions from buildings and building systems, enhance building occupant health and comfort, conserve water resources, protect local biodiversity and ecosystem services, promote sustainable and regenerative materials cycles, enhance building quality, and enhance resilience to natural, technological, and human-caused hazards; and b. support the goal of development that meets the needs of the present without compromising the ability of future generations to meet their own needs. 5

6 ANSI/ASHRAE/USGBC/IES Standard Adopt, with modifications Adopt, with minor modifications Adopt 6

7 Highlights of Standard Section 5 Site Sustainability Site Selection Predesign Site Inventory and Assessment Plants Stormwater Management Mitigation of Heat Island Effect Reduction of Light Pollution Mitigation of Transportation Impacts Building Site Waste Management 7

8 Highlights of Standard Section 6 Water Use Efficiency Site Water Use Reduction Building Water Use Reduction Special Water Features Water Softeners Reverse Osmosis Water Treatment Systems Onsite Reclaimed Water Treatment Systems Water Consumption Measurement 8

9 Highlights of Standard Section 7 Energy Efficiency General comply with sections of 90.1 On-Site Renewable Energy Systems Energy Consumption Management Automated Demand Response On-Site Renewable Energy Systems Building Envelope Heating, Ventilating, and Air Conditioning Service Water Heating Lighting Other Equipment Energy Cost Budget Annual Energy Cost Annual Carbon Dioxide Equivalent 9

10 Highlights of Standard Section 8 Indoor Environmental Quality Indoor Air Quality Thermal Environmental Conditions for Human Occupancy Acoustical Control Soil Gas Control Lighting Quality Moisture Control Daylighting Materials Lighting for Presentations Daylight Simulation Materials Lighting for Presentations 10

11 Highlights of Standard Section 9 Materials and Resources Construction Waste Management Extracting, Harvesting, and/or Manufacturing Refrigerants Areas for Storage and Collection of Recyclable and Discarded Goods Mercury Content Levels of Lamps Reduced Impact Materials Life-Cycle Assessment (LCA) 11

12 Highlights of Standard Section 10 Construction and Plans for Operation Construction Building Systems Functional and Performance Testing Building Project Commissioning Process Project Commissioning Documents Building Envelope Airtightness Erosion and Sedimentation Control IAQ Construction Management Moisture Control Idling of Construction Vehicles Protection of Occupied Areas Construction Waste Management 12

13 Highlights of Standard Section 10 Construction and Plans for Operation Plans for Operation High-Performance Building Operation Plan Maintenance Plan Service Life Plan Transportation Management Plan 13

14 ANSI/ASHRAE/USGBC/IES Standard Standard is: An indication of future industry trends Currently referenced in: Unified Facilities Criteria (DoD) Facilities Standards for the Public Buildings Service (GSA) Guiding Principles for Sustainable Federal Buildings State of Maryland District of Columbia City of Dallas 14