Document under wide circulation

Transcription

1 Address: Manak Bhavan 9, Bahadur Shah Zafar Marg, New Delhi Ph: , , Production and General Engineering Department Document under wide circulation DOCUMENT DESPATCH ADVICE Ref. PGD 15 (12924) Date TECHNICAL COMMITTEE: Ergonomics Sectional Committee, PGD 15 The Chairman and Members of 1. Production and General Engineering Division Council 2. Ergonomics Sectional Committee, PGD Other Interested Members Dear Sir(s), Please find enclosed the following documents prepared by the Ergonomics Sectional Committee, PGD 15: DOCUMENT NO. PGD 15(12924) IS XXXX : XXXX/ ISO : 2012 TITLE Ergonomics of the physical environment Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people ICS (adoption of ISO 28802:2012) Kindly examine the draft standards and forward your views stating any difficulties which you are likely to experience in your business or profession, if this is finally adopted as National Standard. Last date for comments: Comments, if any, may please be made in the format as given in overleaf and mailed to the undersigned at the above address. In case, no comments are received or comments received are of editorial nature, you will kindly permit us to presume your approval for the above document as finalized for adoption as Indian Standard. However, in case of comments of technical in nature are received then it may be finalized either in consultation with the Chairman, Sectional Committee or referred to the Sectional Committee. Thanking you Encls.: As above Yours faithfully, A Renga Rajan Head (PGD) hpgd@bis.org.in Telefax:

2 Document under wide circulation Production and General Engineering Department प ल प ज पन दर भ. प ड 15/( 12924) ददन न म म : श दक स म य म म, प ड 15 र दस य, 1. दषप दन य य मनय प व म र व य प प द 2. श दक स म य म म, प ड र म प न ल य दस य य प, पय म य म म, प ड 15 द प य प द य वय मनम मलम लग प ल प प प प ल ख य भ /TITLE प ड 15(12924) र म प प वभन म क - प प य क ध य IS XXXX : XXXX/ ISO प प लन म प प र म पन प ल व : 2012 व म पप प म द य ऐ मनम पय यन प ल ल न प प पन म म य य ब ह र द यदद य न र प : प म य पप ल पन प व य र प ब प क य हन य म म य र न म म मर: यदद प म म पय ददय वय प र प द स क प दपप प पप र. यदद प म म य प प न य ल म प द य म म य प प दपप प स र प य न म र प म ग पन प म न ल न न म द पप यदद न म म य प प ब य म य म म ध यक पप भ पश र प य न म र प प प प म ग म द य व र दन यच न प यकय यभ म य म म म प रभ र व य द, लग.: दपप र द य, प व प न प (प ड ) hpgd@bis.org.in Telefax:

3 FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS (Please use A4 size sheet of paper only and type within fields indicated. Comments on each clauses/sub-clauses/table/fig. etc are started on a fresh box. Information in Column 4 should include reasons for the comments and suggestions for modified wording of the clauses when the existing text is found not acceptable. Adherence to this format facilitates Secretariat s work) Sl. प ल ख य /DOCUMENT भ /TITLE No NO. 1 PGD 15(12924) IS XXXX : XXXX/ ISO : 2012 Ergonomics of the physical environment Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people ICS (adoption of ISO 28802:2012) LAST DATE OF COMMENTS: NAME OF THE COMMENTATOR/ORGANIZATION: प ल ख य /DOC NO. Sl. Clause/Subclause/ No. para/table/fig. No. commented भ /TITLE Commentator/ Organization/ Abbreviation Type of Comments (General/Editorial/ Technical) Justification Proposed change For Bureau s Use

4 For Comments only Doc. No.: PGD 15 (12924) ISO : 2012 July 2018 Draft Indian Standard Ergonomics of the physical environment Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people ICS (Adoption of ISO : 2012) Not to be reproduced without permission Last date for receipt of comment of BIS or used as Standard is NATIONAL FOREWORD This draft Indian Standard which is identical with ISO : 2012 Ergonomics of the physical environment Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the Ergonomics Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are however not identical to those used in Indian Standards. Attention is particularly drawn to the following a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the currentpractice is to use a point (.) as the decimal marker. In this adopted standard, reference appears to certain International Standard for which Indian Standard also exist. The corresponding Indian Standard which is to be substituted in its respective place is listed below along with its degree of equivalence for the edition indicated: International Standard Corresponding Indian Standard Degree of Equivalence ISO 7726 Ergonomics of the thermal environment Instruments for measuring physical quantities ISO 8041 Human Response to vibration Measuring IEC Electroacoustics Sound level meters Part 1: Specifications IS : 2017 Ergonomics of the thermal environment Instruments for measuring physical quantities IS/ISO 8041 : 2005 Human Response to vibration Measuring IS Part 1 : 2016 Electroacoustics Sound level meters Part 1 Specifications Identical with ISO 7726 : 1998 Identical Identical with IEC : 2013

5 The technical committee responsible for the preparation of this standard has reviewed the provisions of the below mentioned international standard and has decided that it is acceptable for use in conjunction with this standard: International Standard Title ISO 7730 Ergonomics of the thermal environment Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria ISO 8996 Ergonomics of the thermal environment Determination of metabolic rate ISO 9612 Acoustics Determination of occupational noise exposure Engineering method ISO 9920 ISO ISO CIE 69 Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble Ergonomics of the thermal environment Vocabulary and symbols Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions Methods of Characterizing Illuminance Meters and Luminance Meters: Performance, characteristics and specifications In reporting the result of a test or analysis made in accordance with this standard, is to be rounded off, it shall be done in accordance with IS 2 : 1960 Rules for rounding off numerical-values (revised). For complete text please refer to ISO : If anyone requires a copy of the same please contact the undersigned. Shri A Renga Rajan Sc-E & Head (PGD), PGD, ROOM NO: 355 MANAK BHAVAN 9 BHADURSHAH ZAFAR MARG NEW DELHI TELEFAX hpgd@bis.gov.in, pgd@bis.gov.in

6 For Comments only Doc. No.: PGD 15 (12924) ISO : 2012 July 2018 Draft Indian Standard Ergonomics of the physical environment Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people ICS (Adoption of ISO : 2012) Not to be reproduced without permission Last date for receipt of comment of BIS or used as Standard is NATIONAL FOREWORD This draft Indian Standard which is identical with ISO : 2012 Ergonomics of the physical environment Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the Ergonomics Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are however not identical to those used in Indian Standards. Attention is particularly drawn to the following a) Wherever the words International Standard appear referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the currentpractice is to use a point (.) as the decimal marker. In this adopted standard, reference appears to certain International Standard for which Indian Standard also exist. The corresponding Indian Standard which is to be substituted in its respective place is listed below along with its degree of equivalence for the edition indicated: International Standard Corresponding Indian Standard Degree of Equivalence ISO 7726 Ergonomics of the thermal environment Instruments for measuring physical quantities ISO 8041 Human Response to vibration Measuring IEC Electroacoustics Sound level meters Part 1: Specifications IS : 2017 Ergonomics of the thermal environment Instruments for measuring physical quantities IS/ISO 8041 : 2005 Human Response to vibration Measuring IS Part 1 : 2016 Electroacoustics Sound level meters Part 1 Specifications Identical with ISO 7726 : 1998 Identical Identical with IEC : 2013

7 The technical committee responsible for the preparation of this standard has reviewed the provisions of the below mentioned international standard and has decided that it is acceptable for use in conjunction with this standard: International Standard Title ISO 7730 Ergonomics of the thermal environment Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria ISO 8996 Ergonomics of the thermal environment Determination of metabolic rate ISO 9612 Acoustics Determination of occupational noise exposure Engineering method ISO 9920 ISO ISO CIE 69 Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble Ergonomics of the thermal environment Vocabulary and symbols Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions Methods of Characterizing Illuminance Meters and Luminance Meters: Performance, characteristics and specifications In reporting the result of a test or analysis made in accordance with this standard, is to be rounded off, it shall be done in accordance with IS 2 : 1960 Rules for rounding off numerical-values (revised). For complete text please refer to ISO : If anyone requires a copy of the same please contact the undersigned. Shri A Renga Rajan Sc-E & Head (PGD), PGD, ROOM NO: 355 MANAK BHAVAN 9 BHADURSHAH ZAFAR MARG NEW DELHI TELEFAX hpgd@bis.gov.in, pgd@bis.gov.in