SAFETY DATA SHEET. PC29: Pharmaceuticals. PC39: Cosmetics, personal care products. Technical applications.

Transcription

1 Page: 1 Compilation date: 17/10/2016 Revision date: 08/02/2017 Revision No: 1 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: * REACH registered number(s): N/A CAS number: * EINECS number: * - INCI name: * SIMMONDSIA CHINESIS SEED OIL 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of substance / mixture: PC29: Pharmaceuticals. PC39: Cosmetics, personal care products. Technical applications Details of the supplier of the safety data sheet Company name: Naissance Unit 9 Milland Road Industrial Estate Neath Neath Port Talbot SA11 1NJ Tel: info@enaissance.co.uk 1.4. Emergency telephone number Section 2: Hazards identification 2.1. Classification of the substance or mixture Classification under CLP: This product has no classification under CLP Label elements Label elements: This product has no label elements Other hazards PBT: This product is not identified as a PBT/vPvB substance. Section 3: Composition/information on ingredients 3.1. Substances Chemical identity: CAS number: *

2 Page: 2 EINECS number: * - REACH registered number(s): Contains: N/A Simmondsia CAS no not classified as a hazardous substance. Chinensis, seed Oil. Section 4: First aid measures 4.1. Description of first aid measures Skin contact: Eye contact: Ingestion: Inhalation: Wash immediately with plenty of soap and water. Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues 4.2. Most important symptoms and effects, both acute and delayed Skin contact: Eye contact: Ingestion: Inhalation: Delayed / immediate effects: No specific health warnings noted Indication of any immediate medical attention and special treatment needed Immediate / special treatment: Section 5: Fire-fighting measures 5.1. Extinguishing media Extinguishing media: Dry chemical powder. Carbon dioxide. Foam. Do not use direct water jet on burning material Special hazards arising from the substance or mixture Exposure hazards: This product is made up of inflammable material with a low risk. The product may only form ignitable mixtures or burn only above the flash point. However, minor contamination by lightly volitile hydrocarbons may increase the hazard. Ignition hazard at welding at the empty container. Dangerous combustion residues: smoke, carbon monoxide, carbon dioxide Advice for fire-fighters Advice for fire-fighters: Wear self-contained breathing apparatus.

3 Page: 3 Section 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: Remove sources of ignition. Ensure adequate ventilation. Avoid skin and eye contact Environmental precautions Environmental precautions: Land spill: Shut off source. Gather product mechanically if possible. Prevent from entering sewers, surface and ground waters. Dispose of product in suitable containers and according to local regulations 6.3. Methods and material for containment and cleaning up Clean-up procedures: Water spill: Confine the spill immediately with booms. Warn other ships. Notify port and relevent authorities. Remove from surface by skimming or with suitable absorbants. In running waters apply appropriate dispersants inaccordance with regulations. Land Spill: Shut off source. Prevent product from entering sewage, water courses or low lying areas. Contain and absorb spillage with sand, earth or other non-combustible material. Collect and place in suitable waste disposal containers and seal securely Reference to other sections Section 7: Handling and storage 7.1. Precautions for safe handling Handling requirements: Keep containers leak proof, tightly closed and dry. Handle with care and avoid spillage on the floor (spillage can cause slipping hazard). Protect against sun/ light Conditions for safe storage, including any incompatibilities Storage conditions: Suitable packaging: Intrusion into soil to be avoided Store in a cool (max room temp) and well ventilated environment and keep away from sources of ignition, heat and sunlight. Provide suitable mechanical equipment for the safe handling of drums and heavy packages. Electrical equipment and fittings must comply with local regulations Specific end use(s) Specific end use(s): This material is formulated for various uses. Section 8: Exposure controls/personal protection 8.1. Control parameters Workplace exposure limits: DNEL/PNEC Values DNEL / PNEC

4 Page: Exposure controls Engineering measures: Respiratory protection: Hand protection: Eye protection: Skin protection: Environmental: Section 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties State: Liquid Colour: Colourless or pale yellow liquid Odour: Characteristic odour Also soluble in: Oils. Boiling point/range C: >350 Flash point C: 200 Relative density: Other information Other information: Section 10: Stability and reactivity Reactivity Reactivity: Oxidation with atmospheric oxygen. Formation of free fatty acids Chemical stability Chemical stability: Product is stable Possibility of hazardous reactions Hazardous reactions: Reacts with oxidants Conditions to avoid Conditions to avoid: keep away from heat sources, open flames and sunlight Incompatible materials Materials to avoid: Strong oxidising agents. Avoid strong oxidants such as liquid chlorine, and concentrated oxygen Hazardous decomposition products Haz. decomp. products: Does not decompose with proper handling. Section 11: Toxicological information

5 Page: Information on toxicological effects Toxicity values: Symptoms / routes of exposure Skin contact: Eye contact: Ingestion: Inhalation: Delayed / immediate effects: Other information: No specific health warnings noted. Section 12: Ecological information Toxicity Ecotoxicity values: Persistence and degradability Persistence and degradability: Biologically well degradable Bioaccumulative potential Bioaccumulative potential: possible Mobility in soil Mobility: Results of PBT and vpvb assessment PBT identification: This product is not identified as a PBT/vPvB substance Other adverse effects Other adverse effects: Section 13: Disposal considerations Waste treatment methods Disposal operations: Disposal of packaging: NB: Collect and dispose of waste product, in accordance with local authority guidelines, at an authorised disposal facility. Product remainders should not intrude in soil or waters. Product remainders should not intrude in soil or waters Dispose of as normal industrial waste. The user's attention is drawn to the possible existence of regional or national regulations regarding disposal. Section 14: Transport information Transport class: This product does not require a classification for transport.

6 Page: 6 Section 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture Chemical Safety Assessment Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture by the supplier. Section 16: Other information Other information Other information: Legal disclaimer: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 2015/830. * indicates text in the SDS which has changed since the last revision. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product. [final page]