NOTE ON PERFORMANCE TESTING

Transcription

1 NOTE ON PERFORMANCE TESTING Performance Profile Sheet(s) are included in a format that can be easily photo cop ied for each trainee. Performance tests are designed to mea sure competency in the s taught in each module. Please note the number of s to be tested while teaching each module. Each trainee should be tested on all the s listed on the Performance Profile Sheet(s). Before performance, the instructor should brief the trainees on: Test objectives and criteria Safety precautions Procedures for each to be tested The instructor administering the performance should also do the following: Ensure that all of the needed equip ment is available and operating properly. Set up the stations. Organize and administer the test in a way that allows for optimal per for mance. Complete the Performance Profile Sheet(s) for each trainee by assigning a pass/fail score for each listed. include the date for each in the rating box. Monitor adherence to all safety regulations and precautions. Provide adequate supervision to prevent injuries. Take immediate and effective action to remedy any emergency. Performance Testing If Performance Testing is done as part of the National Center for Construction Education and Research Standardized Craft Program, the following conditions must be met: 1. The Craft Instructor must hold valid NCCER instructor cer ti fi ca tion for the craft being tested. 2. The training must be delivered through a Accredited Sponsor recognized by NCCER. 3. For every module, the specific performance must be completed to the satisfaction of the instructor. 4. The results of the must be recorded on the Report Form 200. This form must be provided to the local Accredited Sponsor to be forwarded to the NCCER National Registry. Certified Plus Credential Provided the sponsor is working through an NCCER-Accredited Assessment Center, candidates who successfully pass performance may be eligible for a Certified Plus Credential. A number of NCCER s Performance Profiles cross over to NCCER s Assessment Performance Verifications and may be completed simultaneously. Go to and select the Assessments tab to locate the Performance Verifications associated with this craft. Note two other important conditions are required for the Certified Plus Credential: 1. Candidates must first pass the associated written assessment. 2. An NCCER-Accredited Assessment Administrator must sign off on the Performance Verification before it is submitted to NCCER.

2

3 Module has no Performance Profile Sheet; no performance is required for this module.

4 (PAGE 1 OF 2) Module Number: Module Title: Plumbing Safety Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform include the date for each completion in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 4 1. Inspect the following personal protective equipment: Gloves Body harness Hard hat Safety glasses Safety shoes Hearing protection continued continued PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 2.5

5 (PAGE 2 OF 2) Module Number: Module Title: Plumbing Safety 4 2. Put on the following personal protective equipment: Hard hat Body harness Respiratory protection Eye protection 6 3. Demonstrate proper use of ladders Inspect the following power tools to ensure they are safe to use: Demolition saw Skill saw Reciprocating saw Power drill 9 5. Demonstrate/simulate the proper method of lockout/tagout. 2.6 PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE

6 Module Number: Module Title: Plumbing Tools Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform include the date for each completion in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit Performance the results Testing to the results on Program Craft Sponsor. Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 1, 6 1. Identify basic measuring, layout, and cutting tools. 1, 6 2. Identify basic drilling, boring, and reaming tools. 1, 6 3. Identify hammers, screwdrivers, and vises introduced in this module. 4, 6 4. Explain some of the basic care and maintenance procedures identified in this module. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 3.3

7 Module Number: Module Title: Introduction to Plumbing Math Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform include the date for each completion in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 8 1. Measure pipe using the following methods: End-to-end End-to-center Center-to-center End-to-face Face-to-face Face-to-throat 9, Determine end-to-end dimensions by figuring fitting allowances and thread makeup. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 4.3

8 Module Number: Module Title: Introduction to Plumbing Drawings Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform Recognition: When include the for the NCCER date Standardized for each completion Craft in the Program, rating box. Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 1, 2, 3 1. Interpret and explain information from given drawings Obtain information about piping systems from the set of drawings provided with this module. 5, 6 3. Make isometric sketches from other drawings. 3, 7 4. Explain the relationship among drawings, specification, and the local plumbing code. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 5.5

9 Module Number: Module Title: Plastic Pipe and Fittings Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform Recognition: When include the for the NCCER date Standardized for each completion Craft the Program, rating box. be sure to record Per for mance results on Craft Report Recognition: When for the NCCER Standardized Craft Program, Form 200, and submit the results to the Program Sponsor. be sure to record performance results on Craft Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 1, 2 1. Select correct types of materials for plastic piping systems Identify types of fittings and valves and their uses Select the appropriate personal protective equipment for working with plastic piping Correctly measure, cut, and join plastic piping. 4, 5 5. Select the correct hanger or support for the application. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 6.3

10 Module Number: Module Title: Copper Pipe and Fittings Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform include the date for each completion in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 1, 2 1. Select correct types of materials for copper piping systems Identify types of fittings and valves and their uses Select the appropriate personal protective equipment for working with copper piping Correctly measure, cut, ream, join, and groove copper piping Select the correct hanger or support for the application. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 7.3

11 Module Number: Module Title: Cast-Iron Pipe and Fittings Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the date performed the for (2) each Failed: was did not completed. perform Recognition: When include for the the NCCER date Standardized for each Craft completion Program, in the rating b be sure to record Per for mance results on Craft Report Recognition: When for the NCCER Standardized Craft Program, Form 200, and submit the results to the Program Sponsor. be sure to record performance results on Craft Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 1, 2, 3 1. Select correct types of materials for cast-iron piping systems Identify types of fittings and their uses Select the appropriate personal protective equipment for working with cast-iron piping Correctly measure, cut, and join cast-iron pipe Select the correct hanger or support and spacing for the application. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 8.5

12 (PAGE 1 OF 2) Module Number: Module Title: Carbon Steel Pipe and Fittings Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform include the date for each completion in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 1, 2 1. Identify the common types of materials, schedules, sizes, and labels used with carbon steel piping Identify the common fittings and valves used with carbon steel piping Properly measure, cut, groove, and join carbon steel pipe. continued PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 9.5

13 (PAGE 2 OF 2) Module Number: Module Title: Carbon Steel Pipe and Fittings 2 4. Identify the hazards and safety precautions associated with carbon steel piping Identify the various techniques used in hanging and supporting carbon steel piping. 9.6 PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE

14 Module Number: Module Title: Corrugated Stainless Steel Tubing Rating Rating Levels: Levels: (1) (1) Passed: Passed: performed performed (2) (2) Failed: Failed: did did not not perform perform include list the date the the date for for each each was completion completed. in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Form 200, and submit the results to the Program Sponsor. Certified Plus Credential: Trainees who successfully complete these performance s may be 4 1. Simulate and/or demonstrate how to join corrugated stainless steel tubing. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 10.3

15 Module Number: Module Title: Fixtures and Faucets Rating Rating Levels: Levels: (1) (1) Passed: Passed: performed performed (2) (2) Failed: Failed: did did not not perform perform include list the date the the date for for each each was completion completed. in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Form 200, and submit the results to the Program Sponsor. Certified Plus Credential: Trainees who successfully complete these performance s may be 2, 3, 4 1. Identify the most commonly installed lavatories, tubs, sinks, and toilets. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 11.3

16 Module Number: Module Title: Introduction to Drain, Waste, and Vent (DWV) Systems Rating Levels: (1) Passed: performed (2) Failed: did not perform Rating Levels: (1) Passed: list the performed date the for (2) each Failed: did was not completed. perform Recognition: When include the for the NCCER date Standardized for each completion Craft in the Program, rating box. Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Certified Plus Form 200, and submit the results to the Program Sponsor. Credential: Trainees who successfully complete these performance s may be 2 1. Sketch a simple DWV system, label its components, and size the pipe. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 12.3

17 Module Number: Module Title: Introduction to Water Distribution Systems Rating Rating Levels: Levels: (1) (1) Passed: Passed: performed performed (2) (2) Failed: Failed: did did not not perform perform include list the date the the date for for each each was completion completed. in the rating box. Recognition: When for the NCCER Standardized Craft Program, Recognition: When be sure to record for the Per NCCER for mance Standardized results Craft on Craft Program, Report be Form sure 200, to record and submit performance the results to the results on Craft Program Sponsor. Report Form 200, and submit the results to the Program Sponsor. Certified Plus Credential: Trainees who successfully complete these performance s may be 2 1. Identify the major components of a water distribution system, and describe the function of each component. PLUMBING LEVEL ONE MODULE PERFORMANCE PROFILE 13.3