Leading and Lagging Indicators Evolution of Health & Safety Measurement. Alan D. Quilley CRSP

Transcription

1 Leading and Lagging Indicators Evolution of Health & Safety Measurement Alan D. Quilley CRSP

2 Session Description Measuring safety performance by measuring what doesn t happen to us (incidents and loss) is an extremely poor process measure. The discussion will reveal practical ways to link safety creating activities to our goals of creating safe and healthy places for our employees to productively produce our goods and services.

3 Session Description Through lecture and demonstration the participant will be exposed to how to evolve from measuring what happens and doesn t happen to your company to positively measuring safety creating activities. A process will be revealed that is practical and immediately actionable for those companies who want to move beyond the measurements of negative incident counting.

4 Reducing the Confusion Between LUCKY and SAFE!

5 Safety Excellence Evolution Injury Prevention Injuries by Severity Type Focus on Prevention Lower makes us FEEL Better Manipulate Injury Data through Modified Work Efforts Tend to Diminish With Lower Injury Rates Safety Culture Maturity Through Activities Safety Excellence Safety Creating Activities Safe Production Feel Successful When Safety Activities are Observed Behaviours & Assess Integrity Evidence of Activities Leading to Results

6 Self-Reflection Our Journey Goals & Results VS Leading Indicators of Safety Developing Valid Measures of Safety Evolving Your H&S Management Systems Through Valid Measurements Using Your OWN Evidence

7 We All Want SAFETY But what is it REALLY?

8 Safety Excellence? ALL OF THEM!

9 Is this guy Safe?

10 or this guy?

11 or these two fellows? 11

12 We ve Experienced No Negative Results! This CAN BE the Result of Working/Playing Safely Unfortunately It Can Also Happen By Luck!

13 Let s Do A Little Test Please Raise Your Hand If You Have Children OR YOU Were Once a Child Yourself?

14 Kitchen Safety #101 THE TOOLS MATTER! Have YOU Ever Used a KNIFE as a SCREWDRIVER In YOUR Page 86 CMPBSC Kitchen?

15 What ONE Thing Can YOU Do To Almost guarantee that you will NEVER use a knife as a screwdriver in your Kitchen ever again?

16

17

18 Everything in health & safety is connected!

19 Let s Go SEE Safety

20 Integrated Safety Management System Company Culture Mission, Vision & Values Commitment of Time & Money Safe Behaviour Standards, Practices & Procedures Tools Accountability Activities, Measurements & Rewards Safe Environment Tools, Equipment, Materials, Environment Page 2 CMPBSC Encourage Engage Evolve Evidence-Based

21 Integrated Safety Management System Company Culture Mission, Vision & Values Commitment of Time & Money Safe Behaviour Standards, Practices & Procedures Tools Accountability Activities, Measurements & Rewards Safe Environment Tools, Equipment, Materials, Environment Encourage Engage Evolve Evidence-Based

22 Culture How a group of people behave habitually More simply put, it s just

23 Just the Way It Is Around Here!

24 Company Culture What You Say Mission, Vision, Values, Policies & Statements of Commitment What You Do How You Demonstrate You Mean What You Say How You Allocate Your Resources Time & Money

25 WORDS ARE ALSO ACTIONS, AND ACTIONS ARE A KIND OF WORDS.

26 Safety Culture is Observable

27 Safety Culture is Observable What You Say What You Do

28 Integrated Safety Management System Company Culture Mission, Vision & Values Commitment of Time & Money Safe Behaviour Standards, Practices & Procedures Tools Accountability Activities, Measurements & Rewards Safe Environment Tools, Equipment, Materials, Environment Encourage Engage Evolve Evidence-Based

29 Safety Culture Continuum Integrated Safety Management System Culture, Behaviour, Environment, Accountability Engineering/Procedural The 3 E s, Audits, Procedures, Physical Plant Traditional Elements Awareness, Posters, Awards Be Careful Page 280 Emperor

30 Daily Support for Safety: Who s Engaged? Every person at every level in the company is actively engaged in creating a safe work environment. Accountability flows upward; support flows downward. Safety activities (Observations, procedure reviews, suggestions, etc.) are shared by all employees. Management offers verbal support but is often unacquainted with, and uninvolved in, safety issues. First line supervisors and safety committee members do most of the safety activities (Inspections, Investigations, Follow-up). The safety officer is the primary driving force. Management is often unacquainted with safety matters.

31 The Safety Culture Continuum Factor Traditional Elements-Based Programs The 3 E s: Educate, Engineer, and Enforce Integrated Safety Management System Goals of the Safety Program No stated goals or measurement systems. Goals & measurements are imposed by management and are based on changing trailing indicators (Lost Time Claims, Days Lost). General direction and vision set by management. Entire organization sets safety goals and individual work groups have great input into setting goals and choosing the means to achieve them. Leading indicators and activities are the focus. Management s Attitude to Safety Management believes that more than a minimum spend on safety is not justifiable. Safety is seen as a COST. In accidents, management may believe that workers are at fault for not following the prescribed safety rules ( stupid worker syndrome). Management may have an understanding of the ROI for safety, but sees safety efforts as competing with production. Management believes that workers should be valued and protected, and that doing so is good for the company. Safety is Free! The ROI is significant. Employees Attitude to Safety Employees are indifferent to safety rules, or believe that they will be punished for taking the time to be safe. Employees feel that the rules aren t there for the workers. Feel that their ideas and opinions don t count. Employees believe that safety is the way it is around here. They feel valued, and feel enabled to value the safety of themselves and others. How Management Views Workers Managers at all levels think the people who report to them need to be continually watched and threatened in order to behave safely. Incentives and performance evaluations are often used, along with a carrot-and-stick motivational approach. Often group management, with a standard reward for everyone. Managers at all levels believe that the people who report to them want to be safe and will do so if they are properly motivated. Management understands that individuals are motivated differently.

32 The Safety Culture Continuum Factor Traditional Elements- Based Programs The 3 E s: Educate, Engineer, and Enforce Integrated Safety Management System How Workers View Management Workers believe that management puts safety rules on paper but has no real interest in safety. Workers may believe that management means well, but management is not perceived as taking a strong interest in safety. Safety is traded for production. Workers believe that management is both interested in, and involved with, creating safety. They believe that management really does want them to work safely and that safety, like quality, is not in competition with production efforts. Decision-Making: Who Does It? Management or safety officer makes the decisions. Management or safety officer makes the decisions. Employees are consulted in matters that affect them. Management sets broad goals, workers given day-to-day decision-making authority. Individual workers choose how they want to be recognized and rewarded. Daily Support for Safety: Who s Engaged? The safety officer is the primary driving force. Management is often unacquainted with safety matters. Management offers verbal support but is often unacquainted with, and uninvolved in, safety issues. First line supervisors and safety committee members do most of the safety activities (Inspections, Investigations, Follow-up). Every person at every level in the company is actively engaged in creating a safe work environment. Accountability flows upward; support flows downward. Safety activities (Observations, procedure reviews, suggestions, etc.) are shared by all employees. Communications & Information Flow Little communication from management about safety matters. Safety meetings infrequent and/or ineffective. Procedural reviews may be regular, but information going to workers is limited. Safety meetings are regular and may be mandatory, but are often educate/enforce in nature. Safety information is communicated regularly to employees. People are shown the results of their efforts. Employees are actively involved in safety meetings, which focus on hazard correction and information flow.

33 The Safety Culture Continuum Factor Traditional Elements-Based Programs The 3 E s: Educate, Engineer, and Enforce Integrated Safety Management System Who s Managing the Environment? Unclear who is responsible. Often strong cultural pressures against reporting problems. Supervisors inspect occasionally. Maintenance is spotty. Fault finding after the incident happens. Engineering is planned and carried out by management without worker input. Rules are made with little or no worker input. May be inconsistently enforced. There are regular inspections, but things are often not fixed. Workers are encouraged and supported in bringing forth problems. Workers are consulted in developing solutions and in deciding how those solutions will be applied. There are regular inspections, with a focus on fixing problems. What s the Company Culture? Workers perceive that safety and production are in competition. Workers perceive that safety is more about following rules than a genuine concern for their welfare. Management is doing this to protect their liabilities. Management walks the talk ; management actions are in support of safety and are perceived to be in support of safe work practices. Safe Behaviour and Rules Rules are either absent or cast in stone. Punishment is often severe or violations may be overlooked entirely until an accident happens, after which punishment is severe only if you are caught! Rules are usually cast in stone but may be violated by management ( do what I say but not what I do syndrome). Violations can be overlooked until an accident happens. Employees are directly involved in developing the rules. They re shown WHY things have to be done in a certain way. Employees decide on the consequences, which are then administered fairly. Peer support helps with encouragement. How is Accountability Managed? Unclear. Rule compliance is important only after an incident, when there s a scramble for someone to blame. Supervisors carry the brunt of the blame for poor accident statistics Safe Behaviour is encouraged, but consequences are managed only infrequently. Accountability for safety is unclear. Supervisors and Workers may be considered responsible, but are often denied the necessary conditions (time, resources) to fulfill their responsibilities. Every person in the organization has clear responsibilities and accountabilities around safety, and is evaluated on safety performance. The definition of safe behaviour relates directly to each person s job function. Even the CEO is accountable for behaving safely!

34 The Safety Culture Continuum Factor Traditional Elements- Based Programs The 3 E s: Educate, Engineer, and Enforce Integrated Safety Management System Motivation, Feedback, & Rewards for Safety Performance People performing tasks are given little or no feedback from their immediate supervisor. Recognition is often limited to criticism. Few or no rewards. Perhaps a yearly safety award. Management-prescribed motivational initiatives. Possibly group incentives, tied to trailing indicator statistics that may or may not be directly related to worker effort. Employees may see these as irrelevant or even hypocritical. Employees may be given information on whether management s goals were attained. Typically a yearly report style. Positive reinforcement. Workers are consulted about what it would take for them to be safe, and on what kind of rewards they would like for safety performance. Recognition is soon, reliable, appropriate to the job position, and tailored to the individual. Feedback and rewards are as immediate as possible. Information on the progress towards OH&S goals is readily available through reports, meetings, and discussions. People are urged and helped to celebrate successes. Safety Related Training Both worker and supervisor safety training is poor or nonexistent. May involve only the bare minimum to meet legal requirements. May involve reading the rule book. Training may be required, but it is not usually validated. Supervisors are trained in management but may not be trained in safety-specific techniques. Supervisors are expected to manage training for their employees with little or no support. Training is specific to the worker s needs, delivered in a quality fashion, and validated afterwards. Supervisors are fully trained in how to motivate behaviour, give feedback, conduct inspections, etc. Training is validated by safe behaviour observations and coaching How are Employees Problems Dealt With? No counseling is available. Reprimand and/or dismissal are the usual management tools. Counseling may be available. Entry is usually through disciplinary process. Company culture and peer concern are a major factor in surfacing problems. Employees are offered help within a context of responsibility and accountability.

35 The Safety Culture Continuum Factor Traditional Elements- Based Programs The 3 E s: Educate, Engineer, and Enforce Integrated Safety Management System How Indicators are Used to Evolve the Safety Efforts Incident Investigation Little or no focus on leading indicators. Poor results on trailing indicators will often cause knee-jerk reactions and result in increased safety activities until numbers improve.. The goal is to assign responsibility (blame someone). Deficiencies in the safety system may be hidden. Most measurements focus on trailing indicators. Some safety-related activities are measured (incident investigations, workplace inspections, etc.) Efforts increase when trailing indicator numbers look poor. Investigator attempts to understand the immediate causes of the accident and assign responsibility. Underlying factors are investigated in a superficial way. Leading indicators are measured, then evaluated against the resulting trailing indicator. Safety efforts are evolved as the evidence either demonstrates success or indicates that alterations are in order. Investigator thoroughly explores all contributing aspects of culture, behaviour, environment, and accountability. The goal is to address underlying causes so the conditions are not repeated. Inspired by : Charles W. Bailey - Using Behavioural techniques to Improve Safety Program Effectiveness Based on a study conducted for the Safety Section of the AAR and the FRA

36 Communicate & Manage The Positive Actions Safe Behaviours % Positive Perception Safety Activities

37 Communicate & Manage CELEBRATE The Positive Actions the Results! Safe Behaviours % Positive Perception Safety Activities Trailing Indicators

38 If Safe Production Is The Goal How Can We Measure That We Are Accomplishing Our Goal?

39 Leadership Behaviour Matters! Ralph Waldo Emerson What you do speaks so loudly that I cannot hear what you say

40 Leadership Behaviour Matters! 1. What did you do today to make safety more likely? 2. What did your subordinates do today to make safety more likely? 3. How did you measure how well they did it? 4. How did you reward them for doing it?

41 Leading Indicators To Success

42 Leading Indicators To Failure

43 Leading Indicators Of Safety Safety is Assigned Workplace Observations Completed Time To Resolve Safety Issues Processes Reviewed Management Of Change Completed Safety Meetings & Discussions Recommendations Implemented Cultural Analysis

44 What Makes YOU Believe Your Company Is CREATING Safety?

45 Honourable Mention Globe & Mail's Best Business Books of 2006 Available

46 Thank You For Your Kind Attention Questions?

47 Additional Materials

48 Evidence-Based Criteria to Increase Safety Performance Judith A. Erickson, PhD 1. Safety performance is dependent upon two factors: The safety program and the safety process a. Safety Program: Legislative and regulatory issues; compliance b. Safety Process: Elements within the organization that help or hinder the safety program

49 Evidence-Based Criteria to Increase Safety Performance Judith A. Erickson, PhD 2. Primary factors for successful safety performance: a. Technical/engineering: Equipment, processes, quality control, continuous improvement, maintenance, physical structure, PPE b. Organizational: Formal hierarchy, reporting relationships, budget, employee selection c. Psychosocial: Employees work /personal relationships and psychological responses to work

50 Evidence-Based Criteria to Increase Safety Performance Judith A. Erickson, PhD 3. Safety should be integrated into the organization. It should not be addressed in isolation because it is part of and affects nearly all aspects of the organization. 4. Systems approach: Safety, management, and sociotechnical systems are interrelated; what affects one affects the others so all should be addressed and evaluated simultaneously

51 Evidence-Based Criteria to Increase Safety Performance Judith A. Erickson, PhD 5. Employees do not want to be injured. They usually work unsafely because they: a.) cannot (i.e., production stressed over safety) or b.) will not work safely (i.e., psychological interference by work or personal conditions/situations).

52 Evidence-Based Criteria to Increase Safety Performance Judith A. Erickson, PhD 6. Behavior of employees influenced by what management: a.) does; b.) pays attention to; c.) measures; and d) uses as controls

53 Evidence-Based Criteria to Increase Safety Performance Judith A. Erickson, PhD 7. Evaluating company s effect on safety performance using validated perception surveys: a.) Predictive as well as descriptive; b.) Desired responses already known; c.) Every question scientifically and statistically related to safety; d.) Recommendations based on scientific, meaningful, and real data

54 Evidence-Based Criteria to Increase Safety Performance Judith A. Erickson, PhD 8. Validated perception surveys measure: a.) Organizational importance of safety; b.) Management commitment to safety; c.) Employee involvement, participation, decision making, attitudes; d.) Safety responsibility and accountability; e.) Communication Erickson, J.A. (1994). The effect of corporate culture on injury and illness rates within the organization. Dissertation Abstracts International, 55 (6).