National Occupational Standards Developer s pack for Specialist Installation Occupations (Construction)

Transcription

1 National Occupational Standards Developer s pack for Specialist Installation Occupations (Construction) Project 2016 COSVR683, COSVR684 PART TWO OPTION 4: Loading Bay Equipment (Installation and Maintenance) (See Standard Template Update 2010 and for full details of generic template changes) November 2016

2 Contents Page no. Revised NOS: VR683 v2 Install loading bay equipment 1 VR684 v2 Service and maintain loading bay equipment 7

3 NOS list Specialist Installation Operations Import Interior Systems COSVR125 Install suspended ceiling systems Import OWS COSVR209 Confirm work activities and resources for the work Import OWS COSVR210 Develop and maintain good working relationships Import SCO COSVR211 Confirm the occupational method of work Import SCO COSVR222 Form saw cuts in structural fabric Existing COSVR228 Remove and repair eaves and verge finishings Existing COSVR229 Install eaves, verge and rainwater systems Existing COSVR230 Prepare rainwater systems resources Existing COSVR231 Repair rainwater systems Existing COSVR240 Install insulated enclosures Existing COSVR241 Install insulated enclosure floors Existing COSVR242 Install insulated cladding walls Existing COSVR243 Apply sealants to structural fabric Existing COSVR244 Apply fire rated sealants Existing COSVR245 Apply sealants mechanically Import AOR COSVR250 Erect and dismantle access/working platforms Existing COSVR267 Install internal display systems Existing COSVR268 Install display sign Existing COSVR269 Install graphic displays Import CCEO COSVR360 Install, maintain and remove work area protection and safety equipment Import Plant COSVR387 Operate plant or machinery to lift and transfer loads Import Plant COSVR392 Operate plant or machinery used as work platforms Import Plant COSVR400 Operate powered units, tools or pedestrian plant, machinery or equipment Import Controlling Lifting COSVR402 Slinging and signalling the movement of suspended loads Existing COSVR503 Install door, blind or shutter wiring systems Existing COSVR504 Install industrial pallet racking systems Existing COSVR505 Install industrial shelving systems Existing COSVR506 Maintain and repair industrial storage systems Existing COSVR507 Inspect industrial storage systems Import Wood COSVR641 Conform to general workplace health, safety and welfare Import Wood COSVR642 Conform to productive work practices Import Wood COSVR643 Move, handle or store resources Existing COSVR676 Install door systems Existing COSVR677 Install shutter systems Existing COSVR678 Service and maintain door or shutter systems Existing COSVR679 Dismantle and repair door or shutter systems Existing COSVR680 Install internal blinds or solar shading systems Existing COSVR681 Install external blinds, screens or solar shading systems Existing COSVR682 Service and maintain blinds, screens or solar shading systems Existing COSVR683 Install loading bay equipment Existing COSVR684 Service and maintain loading bay equipment Import CIC COSCCOO04 Prepare for, collect, analyse and present survey data in construction Import Proskills PROHSS6 Conduct a health and safety risk assessment of a workplace Import SEMPTA SEMPEO1 15 Using manual metal arc welding equipment Import SEMPTA SEMPEO1 17 Using semi-automatic MIG or MAG welding equipmenti Abbreviations: OWS SCO AOR CCEO Occupational Work Supervision Specialist Concrete Occupations Accessing Operations and Rigging Construction and Civil Engineering Occupations

4

5 COSVR683 Install loading bay equipment Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components, equipment and consumables installing and commissioning loading bay equipment in completed civil engineering works or existing structures This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting and using materials, components, tools and equipment, and installing and commissioning loading bay equipment in completed civil engineering works or existing structures This standard is for people working in the occupational area of specialist installation and can be used by operatives, supervisors and managers Please note; 2015 Additional template items marked in Green PC4 minimise/prevent damage removed from template 1

6 COSVR683 Install loading bay equipment Additional Information Scope/range related to performance criteria Performance Criteria 1 1 interpretation of drawings, specifications, schedules, method statements, risk assessments and manufacturers' information related to the work to be carried out Performance Criteria 2 2 avoidance of risk by complying with the given information relating to the following 2.1 methods of work 2.2 safe use of health and safety control equipment 2.3 safe use of access equipment 2.4 safe use, storage and handling of materials, tools and equipment 2.5 specific risks to health Performance Criteria 3 3 selection of resources associated with own work 3.1 materials, components and fixings 3.2 tools and equipment 3.3 consumables Performance Criteria 4 4 protection of the work and its surrounding area from damage 5 maintain a clean work space 6 disposal of waste in accordance with current legislation 2

7 COSVR683 Install loading bay equipment Performance Criteria 5 7 demonstration of work skills to measure, mark out, check, align, level, plumb, position, fit, adjust, fix and secure 8 use and maintain hand tools, portable power tools, power tools and ancillary equipment 9 install at least six of the following loading bay equipment in newly completed structures or existing structures to given working instructions 9.1 dock levellers (hinged lip, telescopic lip or drawbridge) 9.2 scissor lifts 9.3 dock seals 9.4 wheel guides 9.5 vehicle restraints 9.6 bumpers 9.7 traffic lights, traffic and/or dock lights 9.8 dock lights 9.9 composite or standard control panesl panels Performance Criteria 6 10 completion of own work within the estimated, allocated time to meet the needs of other occupations and/or client 3

8 COSVR683 Install loading bay equipment Scope/range related to knowledge and understanding Disposal of waste 1 environmental responsibilities, organisational procedures, manufacturers information, statutory regulations and official guidance Emergencies 2 operative's response to situations in accordance with organisational authorisation and personal skills when involved with 2.1 fires, spillages, injuries 2.2 emergencies relating to occupational activities Hazards 3 those identified by risk assessment, methods of work, manufacturers technical information, statutory regulations and official guidance Health and safety control equipment 4 identified by the principles of prevention for occupational use, types and purpose of each type, work situations and general work environment 4.1 collective protective measures 4.2 personal protective equipment (PPE) 4.3 respiratory protective equipment (RPE) 4.4 local exhaust ventilation (LEV) Information 5 drawings, specifications, schedules, method statements, risk assessments, manufacturers' information, official guidance and current regulations governing buildings and official guidance associated with the installation of loading bay equipment Legislation and official guidance 6 this relates to the operative's responsibilities regarding potential accidents, health hazards and the environment whilst working in the workplace, below ground level, in confined spaces, at height, with tools and equipment, with materials and substances, with movement/ and storage of materials and by manual handling and mechanical lifting Maintenance 7 operative care of hand tools, and/or portable power tools, power tools and ancillary equipment 4

9 COSVR683 Install loading bay equipment Methods of work 8 application of knowledge for safe and healthy work practices, procedures and skills relating to the method,/ and area of work and materials used to 8.1 confirm installation type 8.2 check and confirm the dimensions of new and existing structures 8.3 agree appropriate ways in which the work should be carried out 8.4 maintain the principles of minimum intervention and reversible alterations 8.5 stop work at the point when guesswork begins and report findings 8.6 recognise the structural composition of mounting and fixing points 8.7 identify parts and components of loading bay equipment 8.8 assemble loading bay equipment 8.9 control and guide lifting appliances 8.10 install loading bay equipment, dock levellers: hinged lip, telescopic lip and drawbridge, scissor lifts, dock seals, wheel guides, vehicle restraints, bumpers, traffic and dock lights and composite and standard control panels 8.11 install ready assembled (dock pod) loading bay equipment 8.12 check the integrity, fit, installation of loading bay equipment 8.13 position, align and secure cables, conduits and pipes 8.14 test operation functions 8.15 inspect, check and test safety devices 8.16 weld equipment 8.17 recognise and determine when specialist skills and knowledge are required and report accordingly 8.18 work on buildings of historical significance 8.19 describe the operation for optimal energy saving performance 8.20 provide operation, safety and maintenance information to client, customer or their representative 8.21 determine specific requirements for structures of special interest, traditional build (pre 1919) and historical significance?? 8.22 identify and follow the installation quality requirements 8.23 work with, around and in close proximity to plant and machinery 5

10 COSVR683 Install loading bay equipment Methods of work (continued) 8.24 direct and guide the operations and movement of plant and machinery 8.25 use hand tools, portable power tools, power tools and equipment 8.26 work at height 8.27 use access equipment 9 team work and communication 10 needs of other occupations associated with installing loading bay equipment Problems 11 those arising from information, resources and methods of work 11.1 own authority to rectify 11.2 organisational reporting procedures Programme 12 types of progress charts, timetables, productivity targets and time scales 13 how times are estimated times 14 organisational procedures for reporting circumstances which will affect the work programme Protect work 15 protect work against damage from general workplace activities, other occupations and adverse weather conditions Resources 16 materials, components and equipment relating to types, quantity, quality, sizes and the sustainability of standard and/or specialist 16.1 fittings and fixings 16.2 motorised equipment 16.3 consumables 16.4 hand tools, portable power tools, power tools and equipment 16.5 operation, safety and maintenance documentation 17 confirm resources and materials conform with the specification 18 methods of calculating quantity, length, area and wastage associated with the method/ and procedure to install loading bay equipment Security procedures 19 site, workplace, company and operative, vehicles 6

11 COSVR684 Service and maintain loading bay equipment Overview This standard is about 1 interpreting information 2 adopting safe and healthy working practices 3 selecting materials, components, equipment and consumables 4 servicing and maintaining loading bay equipment This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting and using materials, components, tools and equipment, and servicing and maintaining loading bay equipment This standard is for people working in the occupational area of specialist installation and can be used by operatives, supervisors and managers Please note; 2015 Additional template items marked in Green PC4 minimise/prevent damage removed from template 7

12 COSVR684 Service and maintain loading bay equipment Additional Information Scope/range related to performance criteria Performance Criteria 1 1 interpretation of drawings, specifications, schedules, method statements, risk assessments, parts manuals and manufacturers' information related to the work to be carried out Performance Criteria 2 2 avoidance of risk by complying with the given information relating to the following 2.1 methods of work 2.2 safe use of health and safety control equipment 2.3 safe use of access equipment 2.4 safe use, storage and handling of materials, tools and equipment 2.5 specific risks to health Performance Criteria 3 3 selection of resources associated with own work 3.1 materials, components and fixings 3.2 tools and equipment 3.3 consumables Performance Criteria 4 4 protection of the work and its surrounding area from damage 5 maintain a clean work space 6 disposal of waste in accordance with current legislation 8

13 COSVR684 Service and maintain loading bay equipment Performance Criteria 5 7 demonstration of work skills to dismantle, assess, repair, replace, lubricate, assemble and check 8 use and maintain hand tools, portable power tools, power tools and ancillary equipment 9 service and maintain loading bay equipment to given working instructions 10 test operation functions and safety devices 11 record and report findings Performance Criteria 6 12 completion of own work within the estimated, allocated time to meet the needs of other occupations and/or client 9

14 COSVR684 Service and maintain loading bay equipment Scope/range related to knowledge and understanding Disposal of waste 1 environmental responsibilities, organisational procedures, manufacturers information, statutory regulations and official guidance Emergencies 2 operative's response to situations in accordance with organisational authorisation and personal skills when involved with 2.1 fires, spillages, injuries 2.2 emergencies relating to occupational activities Hazards 3 those identified by risk assessment, methods of work, manufacturers technical information, statutory regulations and official guidance Health and safety control equipment 4 identified by the principles of prevention for occupational use, types and purpose of each type, work situations and general work environment 4.1 collective protective measures 4.2 personal protective equipment (PPE) 4.3 respiratory protective equipment (RPE) 4.4 local exhaust ventilation (LEV) Information 5 drawings, specifications, schedules, method statements, risk assessments, manufacturers' information, official guidance and current regulations governing buildings and official guidance associated with servicing and maintaining loading bay equipment Legislation and official guidance 6 this relates to the operative's responsibilities regarding potential accidents, health hazards and the environment whilst working in the workplace, below ground level, in confined spaces, at height, with tools and equipment, with materials and substances, with movement/ and storage of materials and by manual handling and mechanical lifting Maintenance 7 operative care of hand tools, and/or portable power tools, power tools and ancillary equipment 10

15 COSVR684 Service and maintain loading bay equipment Methods of work 8 application of knowledge for safe and healthy work practices, procedures and skills relating to the method/ and area of work and materials used to 8.1 refer to parts manuals, guides and technical service bulletins, electronic data and cross reference information 8.2 agree appropriate ways in which the work should be carried out 8.3 apply routine and non-routine maintenance service methods and procedures required by the manufacturer and owner 8.4 maintain the principles of minimum intervention and reversible alterations 8.5 stop work at the point when guesswork begins and report findings 8.6 ensure power supply is isolated and locked off 8.7 install safety props and guards 8.8 control and guide lifting appliances 8.9 identify requirements of periodic, scheduled and event based servicing methods for loading bay equipment; hinged lip, telescopic lip, drawbridge scissor lifts, dock seals, wheel guides, vehicle restraints, bumpers, traffic and dock lights and composite or standard control panels 8.10 replace serviceable items 8.11 lubricate parts, components, linkages, cables 8.12 clean parts and components 8.13 remove, repair and replace unserviceable components and parts 8.14 remove and replace damaged, worn and unserviceable components and parts 8.15 secure fastenings, nuts, bolts etc 8.16 fit safety devices in accordance with current legislation as required for the type of equipment 8.17 recognise and determine when specialist skills and knowledge are required and report accordingly 8.18 complete sensory checks for leaks, defects by sight, touch, smell, sound 8.19 test the operation of loading bay equipment 8.20 inspect, check and test safety devices 11

16 COSVR684 Service and maintain loading bay equipment Methods of work (continued) 8.21 work on buildings of historical significance 8.22 determine specific requirements for structures of special interest, traditional build (pre 1919) and historical significance 8.23 identify and follow the installation quality requirements 8.24 work with, around and in close proximity to plant and machinery?? 8.25 direct and guide the operations and movement of plant and machinery?? 8.26 use hand tools, portable power tools, power tools and equipment 8.27 work at height 8.28 use access equipment 8.29 record and report findings, maintain records 9 team work and communication 10 needs of other occupations associated with the servicing and maintaining of loading bay equipment Problems 11 those arising from information, resources and methods of work 11.1 own authority to rectify 11.2 organisational reporting procedures Programme 12 types of progress charts, timetables, productivity targets and time scales 13 how times are estimated times 14 organisational procedures for reporting circumstances which will affect the work programme Protect work 15 protect work against damage from general workplace activities, other occupations and adverse weather conditions 12

17 COSVR684 Service and maintain loading bay equipment Resources 16 materials, components and equipment relating to types, quantity, quality, sizes and the sustainability of standard and/or specialist 16.1 consumables, lubricants and fluids, cleaning materials and equipment 16.2 components and associated ancillary items 16.3 ancillary equipment for the service and maintenance work 16.4 test and inspection equipment 16.5 fittings and fixings 16.6 hand tools, portable power tools, power tools and equipment 17 confirm resources and materials conform with the specification 18 methods of calculating quantity, length, area and wastage associated with the method/ and procedure to install loading bay equipment Security procedures 19 site, workplace, company and operative, vehicles 13