MANUAL OF INSTRUCTIONS NANODRONE VCAM HD 3

Transcription

1 Age: 14+ MANUAL OF INSTRUCTIONS NANODRONE VCAM HD 3 Thank you for purchasing our Nanodrone VCAM HD 3. Please read the manual carefully in order to know in detail the drone and fly it safely. Keep this instruction manual for possible future reference. 1

2 WARNING 1. This aircraft is not a toy. It is a quipment that integrates electronic and mechanical with aerodynamic design and it emits high-frequency signals. You need to handle (assembly and disassembly) correctly to avoid accidents. The owner shall drive it and control it always attending some minimum security standards. 2. JUGUETRÓNICA is not responsible for any damage that may suffer the owner due to misuse. 3. This aircraft requires certain knowledge of piloting and flying experience and the age of 14 years. 4. After purchasing the product, JUGUETRÓNICA is not responsible of the security of the owner or of the environment while the aircraft is being flown by its owner. 5. If you detect any malfunction, contact the establishment where you purchased the drone. PRECAUTIONS AND SAFETY WARNINGS This drone has hazardous parts, so it is important to consider the following recommendations: You should always maintain eye contact with your drone not exceeding, in any case, the 1.20m high. Although it is not necessary to be a professional pilot, you must always fly safely. You can fly your drone only in areas suitable for this as flight camps or unpopulated areas. The damage to the drone is the responsibility of who handles. You can never: Flying in urban areas. Fly over crowds of people: parks, beaches, concerts, events, etc. Flying night. Fly near airports, airfields, etc. Flying in areas where conduct flights with other low-altitude aircraft (paragliding, parachuting, heliports, etc). Do not expose others to danger. For more information visit: CONTEÚDO DA CAIXA Lista de componentes: 1 x Nanodrone vcam HD 3 2 x BaterIas 4 x Hélices de reposição 1 x Controle 2,4Ghz 1 x Carregador USB 1 x Chave de fenda 1 x Cartão microsd e leitor 1 x Manual de instruções 2

3 PARTS OF THE CONTROL On/Off Photo/Video Capture Acceleration and turns Absolute Control Return Home acrobatics Trimming Forwards Trimming Backwards Light Control Speeds Steering Control Trimming Turn Right Trimming Turn Left Trimming Left Displacement Trimming Right Displacement BATTERIES INSTALLATION IN THE CONTROL Battery cover 4 x AAA 1,5V 1 Place the batteries according to the polarity. 2 Do not mix new and old batteries. 3. Do not mix different types of batteries. Remove the battery cover unscrew the screws. Place 4 AAA batteries (not included) and place back the cover of the batteries and screw it. 3

4 DEPARTURE 1Turn on the Nanodrone VCam HD 3 Turn the drone and changes the switch on the bottom, to the right ( ON ). CHA OFF ON 2. Turn on the control by pressing the on / off button. The control will emit 3 beeps and the red LED will light flashing. 3. Move up the power lever to the maximum and then lower it to the maximum. The control emits a long beep which means that the control and the drone are synchronized. Your Nanodrone vcam HD 3 is ready to fly. ADVICES: When you synchronize your Nanodrone vcam HD 3 ensured that it is on a flat, horizontal surface so that the flight is stable. Horizontal position PRECAUTIONS 1 When the control LED of the drone remains on but flashes slowly, it indicates that synchronization has not been performed correctly. Turn off the drone and returns to perform the departure from the beginning. 2. If to start flying the drone does not remain stable, lands, turn off the control and the drone and returns to synchronize them watching drone position on a flat, horizontal surface. 3. When the drone LED blinking slowly means that the battery is running out. Lands and carries the drone of the battery with the USB charger provided. 4

5 CHARGE OF THE BATTERY OF THE DRONE CHA off ON CHA ON off 1. Turn off the Nanodrone vcam HD 3 Turn your drone and move the switch on the bottom left ( OFF ) Now extract the battery by removing following the direction of the arrow. 3. To charge the battery, insert it into the charger as shown in the picture (watch the correct position and not use force). Now connect the other end to the USB port of a PC. The charger LED is off during charging, lighting when the battery is charged. CHARGING TIME: 3 The battery takes about 70 minutes to load for 6-8 minutes per battery flight autonomy. PRECAUTIONS FOR BATTERY CHARGING 1. During charging, place the battery and charger in a dry, ventilated area away from sources of intense heat or flammable products. 2. During charging, disconnects the battery of the drone. It is important that the battery charge be supervised by an adult to prevent accidents. 3. Do not charge the battery as soon as you finish flying. Wait for the battery to cool down, otherwise the battery may swell, explode or burn. 4. ensured you to use the original USB charger provided with the drone. When you ve used enough battery or see it s a little swollen, exchange the battery for another. 5. A battery that is not used for a long period of time lose their charge. Charge or discharge a battery often shortens its lifetime. 5

6 BATTERY MAINTENANCE 1. The battery must be placed in a dry, ventilated place at room temperature between 18 and 25º C. 2. To make the most of the life of your battery, avoid performing repeated loads or ecessivas discharges. 3. When you are storing the battery for a long period of time, and first charges the battery with the umbrella at least 50-60% of the total load allowed. 4. If you are not using it for more than a month, it is recommended to measure it the battery voltage each month to assure you that is not below 3V. Otherwise back to point number 3. MOVEMENT CONTROL UP AND DOWN FORWARD AND BACKWARD Move up the power lever (left) to the drone go up. Lowers the power lever (left) to the drone down. TURN RIGHT AND LEFT Move up the direction lever (right) to the drone go forward. Lowers the direction lever (left) to the drone go backward. LATERAL DISPLACEMENTS Move the power lever (left) to the right or left so that the drone turn to the corresponding side. Move the direction lever (right) to the right or left so that the drone to move to the corresponding side. FLIGHT SPEED In order to enhance the level of difficulty according to your experience Nanodrone vcam HD 3 has a 3-speed sector: low, medium and high. This speed can be selected by pressing the lower cursor, as on the image. 6

7 TRIMMING TRIMMING OF FORWARD AND BACKWARD TRIMMING OF LATERAL DISPLACEMENT TRIMMING OF TURNS LEFT RIGHT When the drone moves forward and backward incorrectly, you can correct the flight by pressing the button trimming of forward and backward according to the need. When the drone moves sideways incorrectly, you can correct the flight pressing the trimming button to displace to the left or right, according to necessity. When the drone turns uncontrolled, you can correct the flight by pressing the trimming button to turn the right or left according to need. FUNCTIONS OF THENANODRONE VCAM HD 3 Low-voltage protection: When the drone of the battery is not charging enough, the motors interrupt its power. It is an automatic protection system battery. Overcurrent protection: When the drone of propellers collide against an object or lock, the power control system momentarily paralyzes the engines, reactivating when the propeller is released. Lights control: The LEd lights drone can be activated or deactivated by pressing the control of top courses as shown in the side image. The first press turns on the LED lights, the following pressure turns them off. Function Return to Home: When you want the drone returns to the starting point automatically, place yourself in front of him, and pressing the button marked in the left image once. When the drone is returning, you should only maintain stable the power lever (left). 7

8 Absolute Control function: While the drone is operating in the normal way, without absolute control, the pilot must master which is the front and rear of the drone, as well as the side, so that, during the flight provides the correct order of movements. In this flight mode when the drone face you it is to know that the controls are reversed. The Nanodrone vcam HD 3 integrates a complete control system that is much simpler to piloting. When the absolute control is on, the direction of the drone does not influence the movements since the drone moves towards its own direction. To activate the mode absolute control press the button shown on the right side image. To disable this mode, simply press it again. Hard Reset: When the drone fly uncontrolled and it is impossible to perform a trimming to correct the flight errors, it is better to perform a factory reestablishment. This setting lets the drone with the fabrication settings that it had when you bought it. To perform the hard reset following the steps: 1. Turn on the drone. 2. Trun on the control. CHA off ON 3. When the drone LED flash quickly, move up and lowers the power lever (left) to the maximum. Now the LED stops flashing to keep fixed. 4. Place the drone on a flat, horizontal surface and moves the right and left control levers the lower left corner for 2-3 seconds and the LED indicator will change to steady light flashing rapidly. When, after 2-3 seconds, the LED back light fixed the drone will be restored correctly. ACROBATIC FLIGHT MODE ADVICES: ACROBATIC MODE: When you ve controlled the flight and basic operation of the drone, you re ready to perform some tricks and impressive stunts. The first of all is that you fly at a height of more than 3 meters, since all the stunts lead to a loss of height, and so avoiding that the drone crashes into the ground. To perform its acrobatics, you have to press the button aerobatics (button located on the front right) and then push the direction lever (right) in the desired direction to make an acrobatic 360. The drone must be with battery charged to perform the stunts. 8

9 USING THE CAMERA Photo capture: Before you start flying insert a microsd card (included) in the entry and assures you that it is properly connected. Once the drone is flying, press the capture button (located on the left front of the control). The front lights drone light up for one second indicating that the capture s been done. Indicadores da câmera Videos capture: To capture videos, press the capture button (located on the left front of the control) for at least for 3 seconds and release it. The camera will start recording while the front lights of drone light up and start flashing. Press the button again to stop recording. LED indicators stop flashing indicating that the recording is interrupted. ACCESSORIES AND EXCHANGES Replacement and/or accessories that can be acquired to complete your Nanodrone vcam HD 3. Propellers Battery Charger PROBLEMS AND SOLUTIONS PROBLEM REASON SOLUTION The drone does not respond to commands. 1. The drone does not have enough battery. 2. The control does not have enough battery. 3. The control of the frequency does not correspond with the drone. 1. Charge the drone. 2. Change the control batteries. 3. Performs a resynchronization of the control and drone. The drone slow to respond or responds with difficulty the commands. 1. The control does not have enough power. 2. There are other radio frequency equipment close to the same frequency control. 1. Exchange the control battery. 2. Remove the other radio frequency equipment from the drone coverage area. 9

10 JUGUETRÓNICA, SL - NIF: B Thank you for purchasing this product. Shop: C/ Alberto Aguilera, Madrid - España After-sales service: C/ Acuerdo, Madrid - España Domestic Warranty and Technical Support