PRICE LIST 10/2017-WW-S.1 SYSTEM SALVAGNINI

Size: px

Start display at page:

Download "PRICE LIST 10/2017-WW-S.1 SYSTEM SALVAGNINI"

Solomon Hardy
5 years ago
Views:

1 PRICE LIST 10/2017-WW-S.1 SYSTEM SALVAGNINI SALVAGNINI THICK TURRET TRUMPF

From this date old price lists lose their validity.

are payable in full 30 days after the submission of the invoice.

Stanztechnik AG are effected exclusively according to PASS

These conditions shall be deemed accepted at the latest upon

2 PRICE LIST 10/2017-WW-S.1 VALIDITY OF PRICES: This pricelist is valid from From this date old price lists lose their validity. CONDITIONS OF PAYMENT: Unless otherwise stipulated, our invoices are payable in full 30 days after the submission of the invoice. SCOPE OF APPLICATION: Deliveries and services provided by PASS Stanztechnik AG are effected exclusively according to PASS delivery and payment conditions. These conditions shall be deemed accepted at the latest upon receipt of the goods or services. 2 CONTACT: / GENERAL REMARKS: You can find our general terms and conditions on our Homepage under:

3 INDEX TOOLS FOR STATION P1 - P20 PASS System Standard (compact version)... up to 33 mm...page 6 PASS System P1 (needle insert)... up to 6 mm...page 7 PASS System P1 (needle insert)... up to 10,5 mm...page 8 PASS System P2 (for 2 mm additional regrind length)... up to 16 mm...page 9 PASS System P4 (blank-holder style and needle insert)... up to 6 mm... page 10 PASS System P4 (blank-holder style and needle insert)... up to 10,5 mm... page 11 PASS System P5 (blank-holder style and punch insert)...up to 12,5 mm... page 12 PASS System P6 (blank-holder style and punch insert)...up to 12,5 mm... page 13 PASS System P7 (blank-holder style and punch insert)... up to 26 mm... page 14 PASS System P8 (punch insert)... up to 33 mm... page 15 PASS System P9 (blank-holder style and punch insert)... up to 26,5 mm... page 16 PASS System P10 (blank-holder style and needle insert)... up to 10,5 mm... page 17 PASS STANDARD SYSTEM FOR P2R PASS System Standard (blank-holder style)... up to 42 mm...page 20 PASS System Standard (blank-holder style)... up to 50,8 mm... page 21 PASS System Standard (compact version)... up to 60 mm...page 22 PASS STANDARD SYSTEM FOR P21 - P24 PASS System Standard (compact version) Type x90 mm... page 26 PASS System Standard (compact version) Type x90 mm... page 27 PASS System Standard (compact version) Type x90 mm... page 28 TOOLING CASSETTES PASS Tooling Cassette to Type Salvagnini S4... up to 33 mm...page 32 PASS Tooling Cassette to Type Salvagnini S4... up to 42 mm...page 33 PASS Tooling Cassette to Type Salvagnini S4... up to 50,8 mm...page 34 PASS Tooling Cassette to Type Salvagnini S4... up to 60 mm...page 35 PASS Tooling Cassette to Type Salvagnini S4... up to 33 mm...page 36 PASS Tooling Cassette to Type Salvagnini S x90 mm... page 37 PASS Tooling Cassette to Type Salvagnini S x90 mm / 90x90 mm...page 38 PASS Tooling Cassette to Type Salvagnini S x90 mm / 90x90 mm...page 39 PASS Tooling Cassette to Type Salvagnini S x90 mm / 90x90 mm...page 40 PASS Tooling Cassette to Type Salvagnini S2... up to 33 mm... page 41 PASS Tooling Cassette Polypunch to Type Salvagnini S4... up to 33 mm... page 42 ACCESSORIES ps: shear-blades mm...page 46 ps: shear-blades mm... page 47 TECHNICAL INFORMATION O.D. Ground Special Shapes...page 50 EDM Required Special Shapes... page 51 PASS Tool Variety... page 52 Life-time of Tools / Regrind Advice...page 53 PASS Coating Versions/Draw-Polishing...page 54 Die Versions...page 55 Punches with Different Shear Types...page 56 Back Taper on Punches... page 57 PASS Corner Edges on Punches...page 58 PASS Punches with Reinforced Shoulder...page 59 Index...page 63 CONTACT: /

4 4 CONTACT: /

5 TOOLS FOR STATION P1 - P20 PASS TOOLS FOR YOUR SALVAGNINI SYSTEM INDEX PASS System Standard (compact version) up to 33 mm page 6 PASS System P1 (needle insert) up to 6 mm page 7 PASS System P1 (needle insert) up to 10,5 mm page 8 PASS System P2 (for 2 mm additional regrind length) up to 16 mm page 9 PASS System P4 (blank-holder style and needle insert) up to 6 mm page 10 PASS System P4 (blank-holder style and needle insert) up to 10,5 mm page 11 PASS System P5 (blank-holder style and punch insert) up to 12,5 mm page 12 PASS System P6 (blank-holder style and punch insert) up to 12,5 mm page 13 PASS System P7 (blank-holder style and punch insert) up to 26 mm page 14 PASS System P8 (punch insert) up to 33 mm page 15 PASS System P9 (blank-holder style and punch insert) up to 26,5 mm page 16 PASS System P10 (blank-holder style and needle insert) up to 10,5 mm page 17 CONTACT: /

6 PASS SYSTEM STANDARD (COMPACT VERSION) TYPE: 33 MM / 70 KN / P1 - P20 MAX. DIAMETER: 33 MM POS.-NO. PART.-NO. PRICE IN 1 PUNCH (H-PM ) Round ,69 Square ,22 Rectangle ,22 Oblong ,22 O.D. Ground Special Shape G 167,89 EDM Required Special Shape E 301,94 2 STRIPPER Round ,00 Square ,31 Rectangle ,31 Oblong ,31 O.D. Ground Special Shape G 48,56 EDM Required Special Shape E 51,76 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 94,76 EDM Required Special Shape E 111,24 3 SPARE PARTS ADDITIONAL COSTS FOR PUNCH Shims for die t=0,3 203A33 3,19 TICN coating 35,02 Shims for die t=0,5 205A35 3,19 T-MAX coating 70,04 A-MAX coating 56,65 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR STRIPPER Polypunch 4,22 6 CONTACT: / ADDITIONAL COSTS FOR DIE Reinforced 49,44 slug-snap on request

7 PASS SYSTEM P1 (NEEDLE INSERT) TYPE: 33 MM / 70 KN / P1 - P20 MAX. DIAMETER: 6 MM POS.-NO. PART-NO. PRICE IN UPPER PART Round ,58 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape PUNCH CHUCK Round ,91 3 PUNCH INSERT (SHAFT Ø 6 MM) (H-PM ) Round 3 207P1A1 12,67 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape STRIPPER Round ,00 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape DIE (SLUG-STOP*) (H-PM ) Round ,04 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 9,27 Retaining screw ,11 T-MAX coating 18,54 Shims for die t=0,3 203A33 3,19 A-MAX coating 15,45 Shims for die t=0,5 205A35 3,19 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR STRIPPER Polypunch 4,22 ADDITIONAL COSTS FOR DIE Reinforced 49,44 slug-snap on request CONTACT: /

8 PASS SYSTEM P1 (NEEDLE INSERT) TYPE: 33 MM / 70 KN / P1 - P20 MAX. DIAMETER: 10,5 MM POS.-NO. PART-NO. PRICE IN 1 2 UPPER PART Round ,69 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape PUNCH CHUCK Round , PUNCH INSERT (SHAFT Ø 10,5 MM) (H-PM ) Round 3 207P1B1 14,78 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape STRIPPER Round ,00 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape DIE (SLUG-STOP*) (H-PM ) Round ,04 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape SPARE PARTS ADDITIONAL COSTS FOR PUNCH Retaining screw ,11 TICN coating 10,30 Shims for die t=0,3 203A33 3,19 T-MAX coating 20,60 Shims for die t=0,5 205A35 3,19 A-MAX coating 16,48 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR STRIPPER Polypunch 4,22 8 CONTACT: / ADDITIONAL COSTS FOR DIE Reinforced 49,44 slug-snap on request

PASS SYSTEM P2 (FOR 2 MM ADDITIONAL REGRIND LENGTH) TYPE: 33 MM / 70 KN / P1 - P20 POS.-NO. PART-NO. PRICE IN MAX.

Shape 1-4 21544E 347,37 1 2 3 PUNCH CHUCK All shapes 1-3 219441 164,70 PUNCH INSERT (H-PM ) Round 4 207P2A1 30,64 Square 4 207P2A02 64,43 Rectangle 4 207P2A03 64,43 Oblong 4 207P2A04 64,43 O.D.

Required Special Shape 4 207P2AE 182,67 4 5 STRIPPER Round 5 210301 19,00 Square 5 2103002 43,31 Rectangle 5 2103003 43,31 Oblong 5 2103004 43,31 O.D.

9 PASS SYSTEM P2 (FOR 2 MM ADDITIONAL REGRIND LENGTH) TYPE: 33 MM / 70 KN / P1 - P20 POS.-NO. PART-NO. PRICE IN MAX. DIAMETER: 16 MM UPPER PART Round ,34 Square ,12 Rectangle ,12 Oblong ,12 O.D. Ground Special Shape G 241,79 EDM Required Special Shape E 347, PUNCH CHUCK All shapes ,70 PUNCH INSERT (H-PM ) Round 4 207P2A1 30,64 Square 4 207P2A02 64,43 Rectangle 4 207P2A03 64,43 Oblong 4 207P2A04 64,43 O.D. Ground Special Shape 4 207P2AG 77,10 EDM Required Special Shape 4 207P2AE 182, STRIPPER Round ,00 Square ,31 Rectangle ,31 Oblong ,31 O.D. Ground Special Shape G 48,56 EDM Required Special Shape E 51,76 6 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 94,76 EDM Required Special Shape E 111,24 ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 24,72 Retaining screw ,11 T-MAX coating 49,44 Set shims for punch chuck (4x0,5 mm) ,30 A-MAX coating 39,14 Shims for die t=0,3 203A33 3,19 Cutting part under 1,00 mm + 40 % Shims for die t=0,5 205A35 3,19 ADDITIONAL COSTS FOR STRIPPER Polypunch 4,22 ADDITIONAL COSTS FOR DIE Reinforced 49,44 slug-snap on request CONTACT: /

10 PASS SYSTEM P4 (BLANK-HOLDER STYLE AND NEEDLE INSERT) TYPE: 33 MM / 70 KN / P1 - P20 MAX. DIAMETER: 6 MM POS.-NO. PART-NO. PRICE IN UPPER PART Round ,00 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape PUNCH INSERT (SHAFT Ø 6 MM) (H-PM ) Round 4 207P4A1 12,67 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape BLANK-HOLDER/GUIDE Round ,46 Square Rectangle Oblong O.D. Ground Special Shape EDM required Special Shape STRIPPER Round 35 mm ,00 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape SPARE PARTS ADDITIONAL COSTS FOR PUNCH Punch head ,54 TICN coating 9,27 Retaining screw ,11 T-MAX coating 18,54 Retaining ring ,08 A-MAX coating 15,45 Spring ,33 Cutting part under 1,00 mm + 40 % Shims for die t=0,3 203A33 3,19 ADDITIONAL COSTS FOR STRIPPER Shims for die t=0,5 205A35 3,19 Polypunch 4,22 ADDITIONAL ACCESSORIES ADDITIONAL COSTS FOR DIE Assembly adapter ,45 Reinforced 49,44 slug-snap on request 10 CONTACT: /

11 PASS SYSTEM P4 (BLANK-HOLDER STYLE AND NEEDLE INSERT) TYPE: 33 MM / 70 KN / P1 - P20 POS.-NO. PART-NO. PRICE IN MAX. DIAMETER: 10,5 MM UPPER PART Round ,11 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape PUNCH INSERT (SHAFT Ø 10,5 MM) (H-PM ) Round 4 207P4B1 14,78 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape BLANK-HOLDER/GUIDE Round ,46 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape STRIPPER Round 35 mm ,00 8 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 10,30 Punch head ,54 T-MAX coating 20,60 Retaining screw ,11 A-MAX coating 16,48 Retaining ring ,08 Cutting part under 1,00 mm + 40 % Spring ,33 ADDITIONAL COSTS FOR STRIPPER Shims for die t=0,3 203A33 3,19 Polypunch 4,22 Shims for die t=0,5 205A35 3,19 ADDITIONAL COSTS FOR DIE ADDITIONAL ACCESSORIES Reinforced 49,44 Assembly adapter ,45 slug-snap on request CONTACT: /

12 PASS SYSTEM P5 (BLANK-HOLDER STYLE AND PUNCH INSERT) TYPE: 33 MM / 70 KN / P1 - P20 MAX. DIAMETER: 12,5 MM POS.-NO. PART-NO. PRICE IN UPPER PART Round ,33 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape PUNCH INSERT (H-PM ) Round 5 207P5A1 16,89 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape BLANK-HOLDER/GUIDE Round ,46 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape STRIPPER Round 35 mm ,00 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square Rectangle Oblong O.D. Ground Special Shape EDM Required Special Shape SPARE PARTS ADDITIONAL COSTS FOR PUNCH Punch head ,65 TICN coating 13,39 Retaining screw ,11 T-MAX coating 25,75 Pin ,08 A-MAX coating 20,60 Retaining ring ,08 Cutting part under 1,00 mm + 40 % Spring ,33 ADDITIONAL COSTS FOR STRIPPER Shims for die t=0,3 203A33 3,19 Polypunch 4,22 Shims for die t=0,5 205A35 3,19 ADDITIONAL ACCESSORIES ADDITIONAL COSTS FOR DIE Assembly adapter ,45 Reinforced 49,44 slug-snap on request 12 CONTACT: /

13 PASS SYSTEM P6 (BLANK-HOLDER STYLE AND PUNCH INSERT) TYPE: 33 MM / 70 KN / P1 - P20 MAX. DIAMETER: 12,5 MM POS.-NO. PART-NO. PRICE IN UPPER PART Round Square ,34 Rectangle ,34 Oblong ,34 O.D. Ground Special Shape G 232,27 EDM Required Special Shape E 361,07 PUNCH INSERT (H-PM ) Round Square 5 207P6A02 55,98 Rectangle 5 207P6A03 55,98 Oblong 5 207P6A04 55,98 O.D. Ground Special Shape 5 207P6AG 68,65 EDM Required Special Shape 5 207P6AE 194, BLANK-HOLDER/GUIDE Round Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 89,76 EDM Required Special Shape E 92,91 STRIPPER Round 35 mm ,00 9 DIE (SLUG-STOP*) (H-PM ) Round Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 94,76 EDM Required Special Shape E 111,24 ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 13,39 Punch head ,57 T-MAX coating 25,75 Retaining screw ,11 A-MAX coating 20,60 Pin ,08 Cutting part under 1,00 mm + 40 % Retaining ring ,08 ADDITIONAL COSTS FOR STRIPPER Spring ,33 Polypunch 4,22 Shims for die t=0,3 203A33 3,19 Shims for die t=0,5 205A35 3,19 ADDITIONAL COSTS FOR DIE ADDITIONAL ACCESSORIES Reinforced 49,44 Assembly adapter ,45 slug-snap on request CONTACT: /

14 PASS SYSTEM P7 (BLANK-HOLDER STYLE AND PUNCH INSERT) TYPE: 33 MM / 70KN / P1 - P20 DIAMETER: UP TO 26 MM POS.-NO. PART-NO. PRICE IN UPPER PART Round ,90 Square ,94 Rectangle ,94 Oblong ,94 O.D. Ground Special Shape G 281,91 EDM Required Special Shape E 393,82 PUNCH INSERT (H-PM ) Round 3 207P7B1 58,09 Square 3 207P7B02 97,13 Rectangle 3 207P7B03 97,13 Oblong 3 207P7B04 97,13 O.D. Ground Special Shape 3 207P7BG 109,80 EDM Required Special Shape 3 207P7BE 219,60 9 BLANKHOLDER/GUIDE Round ,46 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 89,76 EDM Required Special Shape E 92,91 10 STRIPPER Round 35 mm ,00 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 94,76 EDM Required Special Shape E 111,24 SPARE PARTS ADDITIONAL COSTS FOR PUNCH Punch head ,35 TICN coating 24,72 Retaining screw ,11 T-MAX coating 49,44 Pin ,08 A-MAX coating 39,14 Spring ,33 Cutting part under 1,00 mm + 40 % Spacer ,67 Retaining ring ,08 ADDITIONAL COSTS FOR STRIPPER Shims for die t=0,3 203A33 3,19 Polypunch 4,22 Shims for die t=0,5 205A35 3,19 ADDITIONAL ACCESSORIES ADDITIONAL COSTS FOR DIE Assembling circlip pliers ,09 Reinforced 49,44 Assembling pin ,20 slug-snap on request 14 CONTACT: /

Ground Special Shape 1-3 21565G 268,16 EDM Required Special Shape 1-3 21565E 398,04 1 2 PUNCH BODY All shapes 1+2 219651 164,70 PUNCH INSERT (H-PM ) Round 3 207P8B1 66,54 Square 3 207P8B02 90,79

15 PASS SYSTEM P8 (PUNCH INSERT) TYPE: 33 MM / 70 KN / P1 - P20 DIAMETER: UP TO 33 MM POS.-NO. PART-NO. PRICE IN UPPER PART Round ,24 Square ,49 Rectangle ,49 Oblong ,49 O.D. Ground Special Shape G 268,16 EDM Required Special Shape E 398, PUNCH BODY All shapes ,70 PUNCH INSERT (H-PM ) Round 3 207P8B1 66,54 Square 3 207P8B02 90,79 Rectangle 3 207P8B03 90,79 Oblong 3 207P8B04 90,79 O.D. Ground Special Shape 3 207P8BG 103,46 EDM Required Special Shape 3 207P8BE 233, STRIPPER Round ,00 Square ,31 Rectangle ,31 Oblong ,31 O.D. Ground Special Shape G 48,56 EDM Required Special Shape E 51,76 5 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 94,76 EDM Required Special Shape E 111,24 ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 35,02 Retaining screw ,19 T-MAX coating 70,04 Shims for die t=0,3 203A33 3,19 A-MAX coating 56,65 Shims for die t=0,5 205A35 3,19 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR STRIPPER Polypunch 4,22 ADDITIONAL COSTS FOR DIE Reinforced 49,44 slug-snap on request CONTACT: /

16 PASS SYSTEM P9 (BLANK-HOLDER STYLE AND PUNCH INSERT) TYPE: 33 MM / 70 KN / P1 - P20 DIAMETER: UP TO 26,5 MM POS.-NO. PART-NO. PRICE IN UPPER PART Round ,90 Square ,94 Rectangle ,94 Oblong ,94 O.D. Ground Special Shape G 281,91 EDM Required Special Shape E 393,82 PUNCH INSERT (H-PM ) Round 6 207P9B1 58,09 Square 6 207P9B02 97,13 Rectangle 6 207P9B03 97,13 Oblong 6 207P9B04 97,13 O.D. Ground Special Shape 6 207P9BG 109,80 EDM Required Special Shape 6 207P9BE 219,60 BLANKHOLDER/GUIDE Round ,46 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 89,76 EDM Required Special Shape E 92,91 10 STRIPPER Round 35 mm ,00 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 94,76 EDM Required Special Shape E 111,24 SPARE PARTS ADDITIONAL COSTS FOR PUNCH Punch head ,35 TICN coating 24,72 Retaining screw ,11 T-MAX coating 49,44 Pin ,08 A-MAX coating 39,14 Spring ,33 Cutting part under 1,00 mm + 40 % Spacer ,67 Retaining ring ,08 ADDITIONAL COSTS FOR STRIPPER Shims for die t=0,3 203A33 3,19 Polypunch 4,22 Shims for die t=0,5 205A35 3,19 ADDITIONAL ACCESSORIES ADDITIONAL COSTS FOR DIE Assembly adapter ,45 Reinforced 49,44 slug-snap on request 16 CONTACT: /

17 PASS SYSTEM P10 (BLANK-HOLDER STYLE AND NEEDLE INSERT) TYPE: 33 MM / 70 KN / P1 - P20 POS.-NO. PART-NO. PRICE IN MAX. DIAMETER: UP TO 10,5 MM UPPER PART Round ,34 Square ,68 Rectangle ,68 Oblong ,68 O.D. Ground Special Shape G 238,60 EDM Required Special Shape E 367,40 PUNCH INSERT (SHAFT Ø10,5 MM) (H-PM ) Round 4 207P10A1 30,64 Square 4 207P10A02 54,95 Rectangle 4 207P10A03 54,95 Oblong 4 207P10A04 54,95 O.D. Ground Special Shape 4 207P10AG 68,65 EDM Required Special Shape 4 207P10AE 194,26 BLANKHOLDER/GUIDE Round ,46 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 89,76 EDM Required Special Shape E 92, STRIPPER Round 35 mm ,00 8 DIE (SLUG-STOP*) (H-PM ) Round ,04 Square ,46 Rectangle ,46 Oblong ,46 O.D. Ground Special Shape G 94,76 EDM Required Special Shape E 111,24 ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 24,72 Punch head ,90 T-MAX coating 49,44 Retaining screw ,11 A-MAX coating 39,14 Spring ,33 Cutting part under 1,00 mm + 40 % Special-threadscrew ,22 Shims for die t=0,3 203A33 3,19 ADDITIONAL COSTS FOR STRIPPER Shims for die t=0,5 205A35 3,19 Polypunch 4,22 ADDITIONAL COSTS FOR DIE ADDITIONAL ACCESSORIES Reinforced 49,44 Assembly adapter ,45 slug-snap on request CONTACT: /

18 18 CONTACT: /

19 PASS STANDARD SYSTEM FOR P2R PASS TOOLS FOR YOUR SALVAGNINI SYSTEM INDEX PASS System Standard (blank-holder style) up to 42 mm page 20 PASS System Standard (blank-holder style) up to 50,8 mm page 21 PASS System Standard (compact version) up to 60 mm page 22 CONTACT: /

Ground Special Shape 1 215L0G 204,82 EDM

20 PASS SYSTEM STANDARD (BLANK-HOLDER STYLE) TYPE: 42 MM / 120 KN / P2R MAX. DIAMETER: 42 MM POS.-NO. PART-NO. PRICE IN 1 2 PUNCH (H-PM ) Round 1 201L01 166,81 Square 1 201L ,01 Rectangle 1 201L ,01 Oblong 1 201L ,01 O.D. Ground Special Shape 1 215L0G 204,82 EDM Required Special Shape 1 215L0E 375,85 STRIPPER Round 2 210L01 86,57 Square 2 210L002 88,68 Rectangle 2 210L003 88,68 Oblong 2 210L004 88,68 O.D. Ground Special Shape 2 217L0G 93,99 EDM Required Special Shape 2 217L0E 101,35 4 DIE (SLUG-STOP*) (H-PM ) Round 3 206L01 166,81 Square 3 206L ,92 Rectangle 3 206L ,92 Oblong 3 206L ,92 O.D. Ground Special Shape 3 216L0G 179,48 EDM Required Special Shape 3 216L0E 189,01 3 SPARE PARTS ADDITIONAL COSTS FOR PUNCH Shims for die t=0,3 203A01 7,42 TICN coating 36,05 Shims for die t=0,5 205A01 8,45 T-MAX coating 72,10 Brush inserts Ø 13 mm (piece) 4 200B00 1,70 A-MAX coating 57,68 Brush inserts Ø 8 mm (piece) 4 200B01 2,78 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR DIE Reinforced 66,95 slug-snap on request 20 CONTACT: /

21 PASS SYSTEM STANDARD (BLANK-HOLDER STYLE) TYPE: 50,8 MM / 120 KN / P2R POS.-NO. PART-NO. PRICE IN MAX. DIAMETER: 50,8 MM PUNCH (H-PM ) Round ,69 Square ,06 Rectangle ,06 Oblong ,06 O.D. Ground Special Shape G 319,92 EDM Required Special Shape E 499,40 STRIPPER Round ,77 Square ,88 Rectangle ,88 Oblong ,88 O.D. Ground Special Shape G 116,13 EDM Required Special Shape E 123, DIE (SLUG-STOP*) (H-PM ) Round ,81 Square ,92 Rectangle ,92 Oblong ,92 O.D. Ground Special Shape G 179,48 EDM Required Special Shape E 189, ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 36,05 Shims for die t=0,3 203A01 7,42 T-MAX coating 72,10 Shims for die t=0,5 205A01 8,45 A-MAX coating 57,68 Brush inserts Ø 13 mm (piece) 4 200B00 1,70 Cutting part under 1,00 mm + 40 % Brush inserts Ø 8 mm (piece) 4 200B01 2,78 ADDITIONAL COSTS FOR DIE Reinforced 66,95 slug-snap on request CONTACT: /

PASS SYSTEM STANDARD (COMPACT VERSION) TYPE: 60 MM / 120 KN / P2R MAX. DIAMETER: 60 MM POS.-NO. PART-NO.

Ground Special Shape 1 215L1G 193,23 EDM Required Special Shape 1 215L1E 364,26 STRIPPER Round 2 210L11 66,54 Square 2 210L102 70,76 Rectangle 2 210L103 70,76 Oblong 2 210L104 70,76

22 PASS SYSTEM STANDARD (COMPACT VERSION) TYPE: 60 MM / 120 KN / P2R MAX. DIAMETER: 60 MM POS.-NO. PART-NO. PRICE IN 1 2 PUNCH (H-PM ) Round 1 201L11 173,14 Square 1 201L ,37 Rectangle 1 201L ,37 Oblong 1 201L ,37 O.D. Ground Special Shape 1 215L1G 193,23 EDM Required Special Shape 1 215L1E 364,26 STRIPPER Round 2 210L11 66,54 Square 2 210L102 70,76 Rectangle 2 210L103 70,76 Oblong 2 210L104 70,76 O.D. Ground Special Shape 2 217L1G 76,01 EDM Required Special Shape 2 217L1E 83,43 4 DIE (SLUG-STOP*) (H-PM ) Round L11 166,81 Square L ,92 Rectangle L ,92 Oblong L ,92 O.D. Ground Special Shape L1G 179,48 EDM Required Special Shape L1E 189,01 3 SPARE PARTS ADDITIONAL COSTS FOR PUNCH Shims for die t=0,3 203A11 7,42 TICN coating 39,14 Shims for die t=0,5 205A11 8,45 T-MAX coating 78,28 Brush inserts Ø 13 mm (piece) 4 200B00 1,70 A-MAX coating 62,83 Brush inserts Ø 8 mm (piece) 4 200B01 2,78 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR DIE Reinforced 66,95 slug-snap on request 22 CONTACT: /

23 CONTACT: /

24 24 CONTACT: /

25 PASS STANDARD SYSTEM FOR P21 - P24 PASS TOOLS FOR YOUR SALVAGNINI SYSTEM INDEX PASS System Standard (compact version) Type 90 70x90 mm page 26 PASS System Standard (compact version) Type 90 90x90 mm page 27 PASS System Standard (compact version) Type 70 70x90 mm page 28 CONTACT: /

26 PASS SYSTEM STANDARD (COMPACT VERSION) TYPE 90 TYPE: 90 MM / 260 KN / P22 AND P23 MAX. DIAMETER: 70X90 MM POS.-NO. PART-NO. PRICE IN PUNCH BODY All shapes 1 200L61 288, PUNCH (H-PM ) Round 2 201L61 242,82 Square 2 201L ,82 Rectangle 2 201L ,82 Oblong 2 201L ,82 O.D. Ground Special Shape 2 215L6G 263,94 EDM Required Special Shape 2 215L6E 898, STRIPPER Round L61 156,25 Square L ,25 Rectangle L ,25 Oblong L ,25 O.D. Ground Special Shape L6G 164,70 EDM Required Special Shape L6E 190, DIE (SLUG-STOP*) (H-PM ) Round L61 314,61 Square L ,61 Rectangle L ,61 Oblong L ,61 O.D. Ground Special Shape L6G 330,48 EDM Required Special Shape L6E 414,94 SPARE PARTS ADDITIONAL COSTS FOR PUNCH Shims for die t=0,3 203A06 12,67 TICN coating 50,47 Shims for die t=0,5 205A06 13,75 T-MAX coating 100,94 Brush inserts Ø 13 mm (piece) 5 200B00 1,70 A-MAX coating 82,40 Brush inserts Ø 8 mm (piece) 5 200B01 2,78 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR DIE Reinforced 144,20 slug-snap on request 26 CONTACT: /

D Ground Special Shape 2 215L7G 294,58 EDM Required Special Shape 2 215L7E 1.

27 PASS SYSTEM STANDARD (COMPACT VERSION) TYPE 90 TYPE: 90 MM / 260 KN / P21 AND P24 POS.-NO. PART-NO. PRICE IN MAX. DIAMETER: 90X90 MM PUNCH BODY All shapes 1 200L71 360,04 PUNCH (H-PM ) Round 2 201L71 273,47 Square 2 201L ,47 Rectangle 2 201L ,47 Oblong 2 201L ,47 O.D Ground Special Shape 2 215L7G 294,58 EDM Required Special Shape 2 215L7E 1.164,52 1 STRIPPER Round L71 168,92 Square L ,92 Rectangle L ,92 Oblong L ,92 O.D Ground Special Shape L7G 177,37 EDM Required Special Shape L7E 208, DIE (SLUG-STOP*) (H-PM ) Round L71 360,04 Square L ,04 Rectangle L ,04 Oblong L ,04 O.D Ground Special Shape L7G 375,85 EDM Required Special Shape L7E 445, ADDITIONAL COSTS FOR PUNCH SPARE PARTS TICN coating 55,62 Shims for die t=0,3 203A07 13,75 T-MAX coating 111,24 Shims for die t=0,5 205A07 14,78 A-MAX coating 88,58 Brush inserts Ø 13 mm (piece) 5 200B00 1,70 Cutting part under 1,00 mm + 40 % Brush inserts Ø 8 mm (piece) 5 200B01 2,78 ADDITIONAL COSTS FOR PUNCH Reinforced 155,53 slug-snap on request CONTACT: /

28 PASS SYSTEM STANDARD (COMPACT VERSION) TYPE 70 TYPE: 70 MM / 260 KN / P21 TO P24 MAX. DIAMETER: 70X90 MM POS.-NO. PART-NO. PRICE IN PUNCH BODY All shapes 1 200L81 288, PUNCH (H-PM ) Round 2 201L81 242,82 Square 2 201L ,82 Rectangle 2 201L ,82 Oblong 2 201L ,82 O.D. Ground Special Shape 2 215L8G 263,94 EDM Required Special Shape 2 215L8E 898,47 STRIPPER Round L81 156,25 Square L ,25 Rectangle L ,25 Oblong L ,25 O.D. Ground Special Shape L8G 164,70 EDM Required Special Shape L8E 190, DIE (SLUG-STOP*) (H-PM ) Round L81 314,61 Square L ,61 Rectangle L ,61 Oblong L ,61 O.D. Ground Special Shape L8G 330,48 EDM Required Special Shape L8E 414,94 SPARE PARTS ADDITIONAL COSTS FOR PUNCH Shims for die t=0,3 203A08 12,67 TICN coating 50,47 Shims for die t=0,5 205A08 13,75 T-MAX coating 100,94 Brush inserts Ø 13 mm (piece) 5 200B00 1,70 A-MAX coating 82,40 Brush inserts Ø 8 mm (piece) 5 200B01 2,78 Cutting part under 1,00 mm + 40 % ADDITIONAL COSTS FOR DIE Reinforced 144,20 slug-snap on request 28 CONTACT: /

29 CONTACT: /

30 30 CONTACT: /

31 TOOLING CASSETTES PASS TOOLS FOR YOUR SALVAGNINI SYSTEM INDEX PASS Tooling Cassette to Type Salvagnini S4 up to 33 mm page 32 PASS Tooling Cassette to Type Salvagnini S4 up to 42 mm page 33 PASS Tooling Cassette to Type Salvagnini S4 up to 50,8 mm page 34 PASS Tooling Cassette to Type Salvagnini S4 up to 60 mm page 35 PASS Tooling Cassette to Type Salvagnini S4 up to 33 mm page 36 PASS Tooling Cassette to Type Salvagnini S4 70x90 mm page 37 PASS Tooling Cassette to Type Salvagnini S4 70x90 mm / 90x90 mm page 38 PASS Tooling Cassette to Type Salvagnini S4 70x90 mm / 90x90 mm page 39 PASS Tooling Cassette to Type Salvagnini S2 90x90 mm / 90x90 mm page 40 PASS Tooling Cassette to Type Salvagnini S2 up to 33 mm page 41 PASS Tooling Cassette Polypunch to Type Salvagnini S4 up to 33 mm page 42 CONTACT: /

32 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 33 MM / 120 KN / P2R (COMPACT VERSION) MAX. DIAMETER: 33 MM PART-NO. PRICE IN CASSETTE FOR PUNCH 299X ,08 CASSETTE FOR DIE 299X ,93 32 CONTACT: /

33 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 42 MM / 120 KN / P2R (SPRING LOADED VERSION) PART-NO. PRICE IN MAX. DIAMETER: 42 MM CASSETTE FOR PUNCH 299X ,68 CASSETTE FOR DIE 299X ,58 CONTACT: /

34 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 50,8 MM / 120 KN / P2R (SPRING LOADED VERSION) MAX. DIAMETER: 50,8 MM PART-NO. PRICE IN CASSETTE FOR PUNCH 299X ,54 CASSETTE FOR DIE 299X ,58 34 CONTACT: /

35 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 60 MM / 120 KN / P2R (COMPACT VERSION) MAX. DIAMETER: 60 MM PART-NO. PRICE IN CASSETTE FOR PUNCH 299X ,15 CASSETTE FOR DIE 299X ,58 CONTACT: /

PRICE IN CASSETTE FOR PUNCH 299X33020 804,48 CASSETTE

36 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 33 MM / 70 KN / P1 TO P20 MAX. DIAMETER: 33 MM PART-NO. PRICE IN CASSETTE FOR PUNCH 299X ,48 CASSETTE FOR DIE 299X ,69 36 CONTACT: /

DIAMETER: 70X90 MM CASSETTE FOR PUNCH 299X77010 1.

37 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 70 MM / 260 KN / P21 TO P24 / FRONT & REAR PART-NO. PRICE IN MAX. DIAMETER: 70X90 MM CASSETTE FOR PUNCH 299X ,50 CASSETTE FOR DIE 299X ,14 CONTACT: /

38 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 90 MM / 260 KN / P21 AND P22 / REAR MAX. DIAMETER: 70X90 MM / 90X90 MM PART-NO. PRICE IN CASSETTE FOR PUNCH 299X ,50 CASSETTE FOR DIE 299X ,14 38 CONTACT: /

DIAMETER: 70X90 MM / 90X90 MM CASSETTE FOR PUNCH 299X79020 1.

39 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S4 TYPE: 90 MM / 260 KN / P23 AND P24 / FRONT PART-NO. PRICE IN MAX. DIAMETER: 70X90 MM / 90X90 MM CASSETTE FOR PUNCH 299X ,50 CASSETTE FOR DIE 299X ,14 CONTACT: /

40 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S2 TYPE: 90 MM / 260 KN / P21 TO P24 MAX. DIAMETER: 90X90 MM / 90X90 MM PART-NO. PRICE IN CASSETTE FOR PUNCH 299X ,90 CASSETTE FOR DIE 299X ,15 40 CONTACT: /

DIAMETER: 33 MM CASSETTE FOR PUNCH 299X33520 1.

41 PASS TOOLING CASSETTE TO TYPE SALVAGNINI S2 TYPE: 33 MM / 70 KN / P1 TO P20 PART-NO. PRICE IN MAX. DIAMETER: 33 MM CASSETTE FOR PUNCH 299X ,49 CASSETTE FOR DIE 299X ,15 CONTACT: /

42 PASS TOOLING CASSETTE POLYPUNCH TO TYPE SALVAGNINI S4 TYPE: 33 MM / 40 KN / P31 TO P35 MAX. DIAMETER: 33 MM PART-NO. PRICE IN CASSETTE FOR PUNCH 299XPO ,02 CASSETTE FOR DIE 299XPO ,16 42 CONTACT: /

43 CONTACT: /

44 44 CONTACT: /

45 ACCESSORIES PASS ACCESSORIES FOR SALVAGNINI SYSTEM INDEX ps: shear-blades 400 mm page 46 ps: shear-blades 500 mm page 47 CONTACT: /

46 ps: shear-blades TYPE: 400 MM MADE OF X3-PM STEEL FOR LONG-LASTING LIFETIME PART-NO. PRICE IN SHEAR BLADES MM Set SCHER- MESSER ,72 TOP X TOP Y BOTTOM X BOTTOM Y 46 CONTACT: /

47 ps: shear-blades TYPE: 500 MM MADE OF X3-PM STEEL FOR LONG-LASTING LIFETIME PART-NO. PRICE IN SHEAR BLADES MM Set SCHER- MESSER ,54 TOP X TOP Y BOTTOM X AND Y CONTACT: /

48 48 CONTACT: /

49 TECHNICAL INFORMATION INFORMATION ABOUT OUR TOOLS FOR YOUR SALVAGNINI SYSTEM INDEX O.D. Ground Special Shapes page 50 EDM Required Special Shapes page 51 PASS Tool Variety page 52 Life-time of Tools / Regrind Advice page 53 PASS Coating Versions/Draw-Polishing page 54 Die Versions page 55 Punches with Different Shear Types page 56 Back Taper on Punches page 57 PASS Corner Edges on Punches page 58 PASS Punches with Reinforced Shoulder page 59 Index page 63 CONTACT: /

50 O.D. GROUND SPECIAL SHAPES 50 CONTACT: /

51 EDM REQUIRED SPECIAL SHAPES CONTACT: /

52 PASS TOOL VARIETY HWS HWS tools are made of a secondary hardened cold work steel with superior toughness. This type of steel is especially suitable for dies. Advantage for customer: excellent cost in accordance to performance H-PM H-PM tools are produced with steel made on powder-metallurgical base with a high degree of purity. This guarantees a segregational uniformed microstructure in the complete cross-section of the tool. Advantage for customer: excellent cost in accordance to performance good stability for edges by increased toughness high tool life time due to the unformed microstructure increased current hit-flex-capability; suitable as an excellent base for dies X3-PM The X3-PM tools are made of a high-end powder-metallurgical steel with the best possible performance characteristics for punches in the punching technology due to the best possible degree of purity. The segregational uniformed microstructure with high vanadium concentration in the complete crosssection of the punch guarantees best possible wear resistance regarding tool life time. Advantage for customer: best efficiency by multiple increase of the punch hit count best possible stability for cutting edges extremely high abrasion resistance utmost compressive strength X8-PM The X8-PM tools are made of a highend powder-metallurgical steel with the best possible performance characteristics for dies in the punching technology caused by best possible degree of purity. The high ductility of the segregational uniformed microstructure guarantees best possible fatigue limit. This kind of steel is especially suitable for dies with risk-breakage in regards to special contours. Advantage for customer: best possible absorption of hit-flex stress; prevents fatigue breakage. high abrasion resistance 52 CONTACT: /

53 LIFE-TIME OF TOOLS / REGRIND ADVICE PASS punches and dies are made of high-end special steel in order to guarantee best life-time of tools together with high robustness. Hints Test situation: - H-PM punch in flat version - lubrication of sheet and tool - punch without coating and with ground surface - punch rate approx. 180 hits/min - no nibbling 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 Sheet thickness Square in stainless steel Round in stainless steel Square in mild steel Round in mild steel Square in aluminium Round in aluminium INFLUENCING FACTORS FACTOR Zinc coated sheet / stainless steel with foil / aluminium anodized 0,5-0,8 No sheet-lubrication 0,4-0,6 Punch coating (TICN for stainless steel / T-MAX for zinc coated steel / A-MAX for aluminium) 2,0-4,0 PASS-X3-PM punch 6,0-10,0 Nibbling 0,7-0,9 Notching 0,5-0,7 Whisper tool 0,8-0,9 Punching rate > 300 hits / min. 0,8-0,9 Cutting part with EDM surface 0,4-0,8 Cutting part with polished surface 1,5-3,0 Cutting part smaller than 1,5x sheet thickness 0,6-0,8 Cutting part smaller than 1,0x sheet thickness 0,3-0,5 Using of too small clearance 0,4-0,9 An average decrease of the tool life of 5-10% per regrind has to be taken in account for the first regrind. CONTACT: /

PASS COATING VERSIONS/DRAW-POLISHING TO REDUCE MATERIAL BUILD-UP H-PM tools are produced with steel made on powder-metallurgical base with a high degree of purity to fullfil the highest punching

This process guarantees an extremely high hardness with an outstanding wear resistance of our punching tools.

600 N/mm² - no matter if it concerns mild alloyed aluminium, mild steel, stainless steel or spring band steel.

Tests show us that the well-known TICN coating is a good coating to increase the lifetime (especially working with stainless steel).

54 PASS COATING VERSIONS/DRAW-POLISHING TO REDUCE MATERIAL BUILD-UP H-PM tools are produced with steel made on powder-metallurgical base with a high degree of purity to fullfil the highest punching demands. Furthermore we attach great importance to a high quality hardening process by repeated temporing and deep-freeze subsequently. This process guarantees an extremely high hardness with an outstanding wear resistance of our punching tools. Associated with modern production methods (grinding of the cutting edges with special grinding wheels) we can ensure that the wide range of different sheet qualities can be punched up to N/mm² - no matter if it concerns mild alloyed aluminium, mild steel, stainless steel or spring band steel. A high punch hardness as well as an excellent grinding surface are important in order to counteract the problem with edge build-up. Tests show us that the well-known TICN coating is a good coating to increase the lifetime (especially working with stainless steel). However, the problem of material buildup on the edges have not really been counteracted. Built-up edges are known especially when working with zinced steel aluminium sheets After specialized tests at PASS Stanztechnik AG the below mentioned coatings turned out to be the most successful coatings: TICN A-MAX T-MAX for working with stainless steel for dry processing with aluminium sheet for working with galvanized sheet We recommend draw-polished punch edges to increase tool lifetime and reduce material build up (prices on request). 54 CONTACT: /

DIE VERSIONS SLUG-STOP AND SLUG-SNAP (AVOID THE BUILD-UP OF THE PULLING SLUGS) SLUG-STOP (STANDARD) SLUG-SNAP (SPECIAL VERSION - ADDITIONAL COSTS) PASS dies for tooling system Salvagnini are produced

The pulling slug will be held with the complete circumference in the die. This is not recommended for: - shapes smaller 2,5 mm Alternatively we offer our slug-snap version (additional costs).

55 DIE VERSIONS SLUG-STOP AND SLUG-SNAP (AVOID THE BUILD-UP OF THE PULLING SLUGS) SLUG-STOP (STANDARD) SLUG-SNAP (SPECIAL VERSION - ADDITIONAL COSTS) PASS dies for tooling system Salvagnini are produced in standard version with a slug-stop version (without additional costs). This means that the upper part of the cutting part is produced with a negative angle. The pulling slug will be held with the complete circumference in the die. This is not recommended for: - shapes smaller 2,5 mm Alternatively we offer our slug-snap version (additional costs). In this case special holding bolts are included in the die, clamping the pulling slug positively (better than the slugstop version). The slug-snap version is also more convenient for: - shapes smaller than 2,5 mm - clearance smaller 0,1 mm - clearance smaller 0,1 mm CONTACT: /

PUNCHES WITH DIFFERENT SHEAR TYPES WT WT DESCRIPTION - Advantage: easy regrindable -

Disadvantage: only reasonable for big contours 2 PT - Advantage: no lateral forces optimal

2 PT 4 PT - Advantage: no lateral forces optimal die cutting suitable for trimming -

56 PUNCHES WITH DIFFERENT SHEAR TYPES WT WT DESCRIPTION - Advantage: easy regrindable - Disadvantage: lateral forces DOWT - Advantages: easy regrindable no lateral forces DOWT - Disadvantage: only reasonable for big contours 2 PT - Advantage: no lateral forces optimal die cutting - Disadvantages: only reasonable for big and slim contours difficult to regrind 2 PT 4 PT - Advantage: no lateral forces optimal die cutting suitable for trimming - Disadvantages: only reasonable for big contours difficult to regrind 4 PT 56 CONTACT: /

reduce galling and eliminate breakage of the tool corners and edges.

57 BACK TAPER ON PUNCHES PASS punches are normally produced with back taper to reduce galling and premature punch wear. However it should be mentioned that back taper is very important when punching materials such as stainless steel or very thick material to reduce galling and eliminate breakage of the tool corners and edges. We recommend a line polished version for cutting parts, which have to be produced sink-eroded (special shape with internal contour, e.g. cross-form, U-form, etc.) and in high qualitity sheets. Back taper CONTACT: /

PASS CORNER EDGES ON PUNCHES PASS punches are automatically produced with corner

This process increases the life-time as the corner abrasive wear will be decreased

: square- and triangle punch R=0,15 R=0,15 The corner radius can be changed on

58 PASS CORNER EDGES ON PUNCHES PASS punches are automatically produced with corner radius R = 0,15 mm. This process increases the life-time as the corner abrasive wear will be decreased considerably. e.g.: square- and triangle punch R=0,15 R=0,15 The corner radius can be changed on customer s request. e.g.: R = 0,05 mm instead of R = 0,15 mm for electronical parts. R = 0,5 mm instead of R = 0,15 mm for stainless steel in order to increase tool-life. R=0,05 R=0,5 58 CONTACT: /

PASS PUNCHES WITH REINFORCED SHOULDER All PASS punches are produced with a 4 mm reinforced

This guarantees that you will get a tool with highest stability in order to punch also

However, the correct stripper size has to be selected in subject to machine type, tool

59 PASS PUNCHES WITH REINFORCED SHOULDER All PASS punches are produced with a 4 mm reinforced shoulder as soon as the cutting section is required smaller than 4 mm. This guarantees that you will get a tool with highest stability in order to punch also thicker and high-strength sheets. However, the correct stripper size has to be selected in subject to machine type, tool design, sheet thickness (2), immersion depth (4), stripper thickness (1) and stripper overlap (3). It might be possible that it gets necessary to use a stripper with an appropriate big shape (width min. 4,5 mm) in order to get sure that the reinforced punch shoulder can immerse into the stripper. Collision sector 4 mm CORRECT WRONG CONTACT: /

60 NOTES 60 CONTACT: /

61 NOTES CONTACT: /

62 NOTES 62 CONTACT: /

63 INDEX A Accessories Additional regrind length... 9 A-MAX B Back taper Blank-holder style.10, 11, 12, 13, 14, 16, 17, 20, 21 C Coating versions Compact version...6, 22, 26, 27, 28 Corner radius D Die versions Draw-polishing E EDM required special shapes H H-PM Tool variety HWS Tool variety I Information L Lifetime...46, 47, 53 Life-time of tools Line polished version M Material build up N Needle insert...7, 8, 10, 11, 17 O O.D. ground special shapes P P2R PASS punches Polypunch ps: shear-blades... 46, 47 Punches with different shear types Punch insert... 12, 13, 14, 15, 16 R Regrind advice Reinforced shoulder S slug-snap slug-stop Special shapes... 50, 51 Standard System for P2R Standard System for P21 - P System P1...7, 8 System P System P4...10, 11 System P System P System P System P System P System P System Standard T Blank-holder style... 20, 21 Compact version...6, 22, 26, 27, 28 TICN T-MAX Tooling cassette Polypunch Tooling cassettes Tooling cassette to type Salvagnini S , 41 Tooling cassette to type Salvagnini S4.. 32, 33, 34, 35, 36, 37, 38, 39 Tool lifetime, increased... 54, 58 Tools... 5 Tool variety X X3-PM Tool variety X8-PM Tool variety CONTACT: /