Why choose OKI ISOLA?

Transcription

1 EN 6

2 Why choose OKI? TAILOR-MADE CONFIGURATIONS AND SOLUTIONS Like the rest of OKI range, can be configured in compliance with any tender specification. Not only the customer can select from a range of available standard lengths for the arms and dimensions for the service head but also these components can be made to measure if needed. FUNCTIONAL DESIGN AND ERGONOMICS OKI is designed to be handled intuitively with maximum ease. Profiles shapes and the various component s proportions are well-thought-out so as to optimize handling. SAFE AND FIRM LOCKING Our enhanced PNEUMATIC BRAKE system ensures smooth controlled movements and maximum reliability in the course of time. It is designed to safely operate within 6 bar pressure system. The control keyboard is placed on the main grip of the shelf to drive all movements intuitively. 6 PAG.1

3 OKI EASY TO INSTALL, EASIER TO MAITAIN We create equipment based on two simple key principles: straightforwardness of installation and long-lasting top quality components ensuring minimum maintenance and maximum reliability. Oki is delivered pre-assembled to reduce costs of installation. POWDER COATING, POWERED HYGIENE Protecting EPOXY POWDER COATING guarantees an adequate hygienical surface for all our pendant units. This could be boosted further with our dedicated ANTIBACTERIAL paint to ensure 100% shield against infectious agents. 6 PAG.2

4 INTRODUCTION OKI supply system is a suspended unit thought specifically for special intensive care units and operating theaters. It can be configured either for the SURGEON or the ANESTHESIOLOGIST and the service head can be equipped with all the needed electrical and medical components in compliance with any specification given. It has been designed to offer the medical staff maximum flexibility and reliability. 6 PAG.3

5 OKI - MOTORIZED MAIN HEAD STRUCTURE COMPONENTS INTRODUCTION A/C A - Electrical components B - Gas piping C - Gas outlet OKI is also available with a full motorized mechanism for lifting the service head. This will allow to adjust the height to have all services always in the right place. B C/A 6 PAG.4

6 CUSTOMIZATION OKI can be fullt personilized with a broad range of accessories. Special rail supports or vertical poles are available for installing all the Oki allow fast operations by making it easier for the medical staff to use the equipment, guaranteeing an optimal care to each patient. needed complementary equipment to monitor the patients cital signs. PAINTINGS AND FINISHINGS OKI is painted with thermoset epoxy-polyester paint. Each single profile can be painted separately according to the customer s specific colour-matching. ILLUSTRATIVE COLOUR CHART 9010 MAT 9006 MAT 1013 GLOSSY The colours shown are for guidance only, please refer to the standard RAL colour chart. SPECIAL FINISHINGS The choice of any colour not commonly used might require longer delivery time. Customers are higly recommended to consult our sales office for detailed advice. ANODIZED 6 PAG.5

7 OKI ACCESSORIES Attention to details is making our units a benchmark in foreign markets. We designed a specific rubber gasket that shelters the service head s corners With an extremely simplified design the control panel is intuitive. The arms are controlled with extreme ease and all movements are smooth and precise. hiding at the same time all screws. This adds up to the overall look giving a greater appeal to the unit. 6 PAG.6

8 PROFILE OVERVIEW a - Adjustable bracket for ceiling mounting b - Technical plate c - Cover flange d - Upper rotating arm e - Lower rotating arm f - Motorized rotating junction g - Column junction h - Column arm i - Rubber gasket j - Rail track k - Service compartment l - Shelf m - Broad range of accessories n - Control panel o - Drawer a - Adjustable bracket for ceiling mounting b - Technical plate c - Cover flange d - Upper rotating arm e - Lower rotating arm f - Motorized rotating junction g - Column junction h - Column arm i - Rubber gasket j - Rail track k - Service compartment l - Shelf m - Broad range of accessories n - Control panel o - Drawer 6 PAG.7

9 OKI mm 213mm 118mm mm mm SINGLE ARM DOUBLE ARM LENGHT LOAD CAPACITY LENGHT LOAD CAPACITY 600 mm 200 kg 600 mm 150 kg 900 mm 150 kg 1500 mm 125 kg 1200 mm 150 kg 560mm 382 mm 195 mm 1800 mm 2100 mm 125 kg 90 kg 120mm mm 400mm 350mm 900mm 500mm mm 900mm 500mm mm SINGLE MOTORIZED ARM LENGHT LOAD CAPACITY 900 mm 125 kg mm DOUBLE MOTORIZED ARM LENGHT LOAD CAPACITY 1500 mm 90 kg 1800 mm 90 kg 6 PAG.8

10 SINGLE AND DOUBLE ARM FRONT VIEW SINGLE AND DOUBLE MOTORIZED ARM FRONT VIEW DOUBLE-SIDED FRONT VIEW The drawings are just for guidance. Many other configurations are available. Please contact our sales office for specific enquiries. 6 PAG.9

11 OKI 6 PAG.10

12 TECHNICAL DATA SHEET Testing in production for each single unit For each unit the following tests are performed: -grounding impedance protection in accordance with 18f) of standard standard measurement of leakage current in accordance with 19.3 and 19.4 of EN measurement of dielectric strength, in accordance with 20.3 and 20.4 of standard EN requirements as in , and ; ); b), ); BC), (c)) and b) pressure tests in accordance with d) and d) Tests carried out on end-of-line product form an integral part of this manual EC CERTIFICATE 1548/MDD The devices are made in compliance with Directive 93/42/EEC concerning medical devices Annex II with certification CE0051 Regulation Classification according to the type of protection against electrical hazards Classification according to the degree of protection against penetration of liquids and external agents The equipment should be considered class IIb Class I device. The protection against electric shock is guaranteed by the metal parts of the ground protection IP20 Classification according to the use and conditions Electromagnetic interference Protection provided on external power circuit Supply voltage Low voltage Wire minimum section Conditions for Storage Device for continuous operation The operation of other devices placed near the medical device (as portable equipment or furniture) can cause electromagnetic interference or other interference, always check with qualified personnel Provides adequate protection with circuit breakers or fuses dimensioned according to the power indicated on the label 220/230 V-AC 50/60 hz different supply voltage avaiable upon request 12/24V-AC/DC Lights 1.5 mmq Electrical sockets 2.5 mmq Ground 2.5/6 mmq Temperature: between -10 C and +40 C Relative humidity: between 30% and 75% Conditions for Usage Temperature: between +5 C and 35 C Relative humidity: between 30% and 75% Maintenance The bed head unit does not require routine standard maintenance but only longterm one. Medical gases and electrical components are kept separated : for this reason no special caution during maintenance service is needed. Cleaning Testing Ceiling fixing Aluminum Pneumatic Brakes Quality management systems The epoxy-polyester paint or the anodic oxidation guarantee the durability of all external surfaces. Cleaning is recommended with soft cloth soaked with non-alcoholic and gentle detergents and disinfectants. The products are fully tested and ready for immediate installing. Clamped onto the ceiling with an adjustable bracket Structural profile not less than 3.5mm/cover profile not less than 1.8mm Alloy BAR maximum pressure ISO 9001:2008 n 9120.LMMD EN ISO 13485:2012 n 9124.LMM2 LM MEDICAL DIVISION s.r.l. Via Bornico Palazzolo sull Oglio - Brescia - Italy Phone Fax info@lmmedicaldivision.com Follow us on: REV