ISO/IEC JTC1/SC7 /N3556

Transcription

1 ISO/IEC JTC1/SC7 Software and Systems Engineering Secretariat: CANADA (SCC) ISO/IEC JTC1/SC7 /N Document Type Title Source WG Meeting Minutes Meeting Minutes, WG04, Software and Systems Engineering Tools and Environment, Thailand, to 19 WG04 Convener Project Status Final Reference Action ID Distribution FYI or ACT AG No. of Pages 6 Note Address reply to: ISO/IEC JTC1/SC7 Secretariat École de technologie supérieure Departement of Software and IT Engineering 1100 Notre Dame Ouest, Montréal, Québec Canada H3C 1K3 secretariat@jtc1-sc7.org

2 Software and Systems Engineering - Tools and Environment Convenor: Prof. Dan Hyung Lee(Korea) Information and Communications University Software Technology Institute Dogok-dong, Kangnam-gu, Seoul, KOREA TEL : FAX : danlee@icu.ac.kr Title: Minutes SC7/WG4 Bangkok, Thailand May 15 th 19 th, 2006 Date: Friday, May 19 th, 2006 Source: Action: D. Lee J. Garbajosa For information and action as noted

3 1. General 1.1 Meeting Objectives Minutes TWENTY EIGHTH MEETING OF JTC1/SC7/WG4 Bangkok, Thailand, May 15 th 19 th, Approval of 2006 Plenary Meeting Agenda 2. Approval of Meeting Minutes on 2005 Interim Meeting 3. Review FDIS ballot results of SEE Services if available by the meeting date 4. Produce draft CD/FCD ballot document for Requirement Engineering Tool Requirements 5. Produce comment resolution report for IS revision 6. Produce comment resolution report for IS revision 7. Produce comment resolution report for IS revision 8. Produce draft 2 nd FCD ballot document for revision 9. Produce draft FDIS ballot document for revision 10. Produce draft FCD/DIS ballot document for CM Tool Requirements 11. Plan for NWI 12. Plan for 2006 Interim meeting 13. Update WG4 business plan 14. Improve the WG4 web page 15. Recruit new WG4 members 1.2 Reference Documents 4/N-001 WG4 Document Register 4/N-005 WG4 Membership List 4/N-252 Terms of Reference for an Initial Study Period on Requirement Engineering Tool Requirements 4/N WD 2.0 4/N WD 1.0 4/N-344 Draft FCD (CM Tool Requirements) for ballot 4/N-345 Draft CD/FCD (Requirement Engineering Tool Requirements) for ballot 4/N-346 Bari Draft Interim Meeting Minutes 1

4 4/N-347 FDIS ballot document for /N-348 Draft Bangkok Meeting Agenda 4/N-351 Comments from the letter ballot of FCD /N-352 Comments from the letter ballot of FCD /N-353 Comments from the letter ballot of FDIS IS Information Technology - Software life cycle processes IS Information Technology - Guideline for the evaluation and selection of CASE tools. TR Information Technology - Software life cycle processes - Configuration Management for software TR Information Technology - Process assessment reference model DTR 19759:2004 ISO/IEC DTR Guide to the software engineering body of knowledge SWEBOK IS 12207:1995 /Amd.1 Information Technology - Software life cycle processes 12207:2001 IS 12207:1995 /Amd.2 Information Technology - Software life cycle processes 12207:2002 1:1998 model: Overview 2:1996 model: Foundation 3:1996 model: Architecture 4:1998 model: Architectural semantics IS :2002 Information Technology Product Quality Part 1: Quality Model FDIS 15288:2002 Information Technology Systems engineering System life cycle processes IEEE-828:1998 IEEE Standard for Software Configuration management plans INCOSE web site SE Tools Taxonomy- Requirements Classification tools 1.3 WG4 Delegates Present Juan Garbajosa, Technical University of Madrid, Spain Hyuk Soo Han, Sang Myung University, Korea Ian Hirst, Birchgrove Technology Management Consulting, Australia Michael Krueger, ASE Consulting LLC, USA Byong-Gul Lee, Seoul Women s University, Korea Dan Lee, Information and Communication University, Korea Eric De Pauw, ERLI Software Quality Management, Canada (remotely) Sara Raskin, Celepar, Brazil (remotely) Yuji Shinoki, Hitachi, Ltd., Software Division, Japan Kazunori Shioya, SRA Key Technology Laboratory, Inc., Japan 2

5 2. Meeting 2.1 WG 4 sessions were held at the following times: Monday May 15 th 11:20 through 17:30 Tuesday May 16 th 08:30 through 17:30 Wednesday May 17 th 08:30 through 17:30 Thursday May 18 th 08:00 through 17:30 Friday May 19 th 08:00 through 12: Discussed and approved WG4 Bari Interim meeting minutes. 2.3 Discussed and finalized the WG4 Bangkok Plenary meeting 2006 agenda. Software Engineering Environment Services 2.4 Produced Comments Resolution Report for FDIS CM Tool Requirements 2.5 Produced draft (CM Tool Requirements) document for FCD ballot in June, 2006 Revision of Produced Comments Resolution Report for FCD Reviewed draft 2 nd FCD document Revision of Produced Comments Resolution Report for FCD Reviewed draft DTR document Requirements Engineering Tool Requirements 2.10 Produced draft (Requirement Engineering Tool Requirements) document for CD/FCD ballot in Jan Next Interim Meeting Items 2.11 Agenda items for the next interim meeting are the following: 1. Update and submit IS Produce a ballot document for CD

6 3. Produce a ballot document for FCD produce comment resolution on FCD Produce a ballot document for 2 nd FCD revision 6. Produce a ballot document for DTR revision 7. Produce a ballot document for WG4 NWI (Information Technology Tools and Methods of Requirement Engineering and Management for Product Lines) 8. Prepare the 2007 plenary meeting 9. Update business plan 10. Improve the WG4 web page 11. Recruit new WG4 members Recruiting experts 2.12 Concerning recruitment activities, WG4 is seeking Configuration Management, Requirement Engineering, and CASE tools experts. 3. Bangkok, Thailand 2006 Plenary New Documents 4/N-349 Bangkok Meeting Agenda 4/N-350 Bari Interim Meeting Minutes 4/N-353 Comments Resolution Report for FDIS /N-354 Comments Resolution Report for FCD /N-355 Comments Resolution Report for FCD /N-357 Draft FCD document 4/N-358 Draft CD document 4/N-359 WG4 Bangkok Resolution 4/N-360 Bangkok Meeting Minutes 4/N-361 Convenor s Report 4/N-362 Draft NWI (Information Technology Tools and Methods of Requirement Engineering and Management for Product Lines) 4. Action Plan 4.1 SEE Services Shioya will finish the editorial work for the IS document by May 31 st CM Tool Requirements 4

7 4.2.1 Edit and distribute a ballot documents for FCD to WG4 by May 19 th, 2006 (Byong) Juan will finish the editorial work for the ballot by May 23 rd Juan will send this document to the SC7 Secretariat for FCD ballot on May 24 th. 4.3 RE Tool Requirements Edit and distribute a ballot documents for CD to Michael by July. 10 th, 2006 (Byong) Michael will correct the document by the end of July Byong and Michael will distribute the document to WG4 by Aug. 3 rd, WG4 members will produce feedback by the end of Aug Byong and Michael will finalize the ballot document by the beginning of interim meeting Byong will send this document to the SC7 Secretariat for CD ballot by Dec. 31 st, Revision of Shioya will produce draft 2 nd FCD revision and send it to WG4 by the end of Aug WG4 will respond to Shioya by the end of Sept., Shioya will send this document to the SC7 Secretariat for 2 nd FCD ballot by Nov. 30 th, Revision of Ian and Shioya will produce draft DTR and send it to WG4 by Sept. 30 th, WG4 will respond to Ian and Shioya by the end of Sept Shioya will send this document to the SC7 Secretariat for DTR ballot by Nov. 30 th, NWI Produce a ballot document for WG4 NWI (Information Technology Tools and Methods of Requirement Engineering and Management for Product Lines) by the end of May Byong will send this document to SC7 Secretariat by June 15 th, Next meetings WG4 will have the next interim meeting in Seoul, Korea, Oct. 30 th to Nov. 3 rd of