LEATHER - CUTTING AND CLOSING Perform specialist footwear closing operations
|
|
- Amberlynn Garrett
- 6 years ago
- Views:
Transcription
1 1 of 5 level: 2 credit: 9 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited with this unit standard are able to: describe and set up eyelet machinery; attach eyelets to production work; prepare eyeletted upper for lacing; set up and run lacing equipment; select buckles and/or trims, set up and describe attaching equipment, and attach buckles and/or trims to footwear. They are able to carry out closing work to specified industry performance standards and company quality standards. Open. Evaluation of documentation by NZQA and industry. A centrally established and directed national moderation system has been set up by the Competenz. Specified industry performance is 55% BSI performance or equivalent. BSI Performance is the British Standards Institute internationally recognised performance system (BS3138) where 100% is the standard expected from a competent fully qualified performer using the correct methods and taking the allowed rest, working briskly and as though on an incentive. Other comparable rating or performance systems such as the 60/80 system are acceptable, with the appropriate performance adjustment. Company safety requirements conform to the Health and Safety in Employment Act 1992.
2 2 of 5 Elements and Performance Criteria element 1 Describe and set up eyelet machinery. 1.1 Eyelets are selected according to product specifications. 1.2 Equipment required is identified from the product specifications. 1.3 Machine parts are identified and described in terms of function and operation. pot, raceway, punch, dies, pin. 1.4 The equipment is set up and adjusted for the specified eyelet. blind, surface. element 2 Attach eyelets. 2.1 Work is completed to specified industry performance standards. 2.2 Work is completed to company quality standards. 2.3 Work practices meet company safety requirements. 2.4 Documentation is completed according to company requirements and practice. 2.5 Waste is disposed of according to company requirements and practice.
3 3 of 5 element 3 Prepare eyeleted upper for lacing. 3.1 Upper is received and quality checked against product specifications. 3.2 Lacing method and equipment are selected according to product specifications. element 4 Set up lacing equipment. 4.1 Machine parts are identified and described in terms of function and operation. fingers, looper, needle. 4.2 The equipment is set up and adjusted to meet product specifications. element 5 Lace uppers. 5.1 Lacing meets product specifications. 5.2 All work is completed to specified industry performance standards. 5.3 All work is completed to company quality standards. 5.4 Work practices meet company requirements. 5.5 Documentation is completed according to company requirements and practice.
4 4 of 5 element 6 Select buckles and/or trims, set up and describe attaching equipment. 6.1 Trim and/or buckle is selected according to product specifications. 6.2 Equipment is selected to attach buckle and/or trim according to product specifications. 6.3 Major parts of equipment are identified and described in terms of function and operation. thread supply, needle, foot, tension devices, staple supply, die. 6.4 The machine is threaded and/or staples are loaded according to manufacturer's recommendation. element 7 Attach buckle and/or trim. 7.1 Position of buckles and/or trim on upper matches product specifications. 7.2 Work practices meet company safety requirements. 7.3 All work is completed to specified industry performance standards. 7.4 All work is completed to company quality standards. 7.5 Documentation is completed according to company requirements and practice. Comments on this unit standard Please contact Competenz info@competenz.org.nz if you wish to suggest changes to the content of this unit standard.
5 5 of 5 Please Note Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by the Qualifications Authority before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for providers wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. This unit standard is covered by AMAP 0030 which can be accessed at
LEATHER - BOTTOM STOCK, MAKING AND LASTING Clean, dress, and spray footwear in a shoe room
1 of 6 level: 3 credit: 18 planned review date: November 2005 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Footwear and Leather Trades People credited
More informationPUBLIC SECTOR SERVICE DELIVERY Establish client needs and gain agreement on requirements for public sector service delivery
1 of 5 level: 6 credit: 15 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationPUBLIC SECTOR SERVICE DELIVERY Develop public sector service delivery objectives, and implement systems to meet client needs
1 of 5 level: 7 credit: 20 planned review date: February 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationMaximise timber recovery
Page 1 of 6 Maximise timber recovery Level 5 Credits 25 Purpose People credited with this unit standard are able to: manage safety when maximising timber recovery; compare log supply with log specification;
More informationAssist press operator on a reel-fed printing press
Page 1 of 5 Assist press operator on a reel-fed printing press Level 2 Credits 12 Purpose People credited with this unit standard are able to: follow safety requirements for the press being used; check
More informationProduce screens, and make stencils using the capillary system, for screen printing
Page 1 of 5 Produce screens, and make stencils using the capillary system, for screen printing Level 3 Credits 12 Purpose People credited with this unit standard are able to: check documentation and confirm
More informationVEHICLE BODYWORK Mask a repair for priming; and prime, fill, and sand a repair in the motor body industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21703 replaced unit standard 3868 and unit standard
More informationMake ready a sheet-fed offset printing press for spot colour work
Make ready a sheet-fed offset printing press for spot colour work 26318 version 1 Page 1 of 5 Level 3 Credits 30 Purpose People credited with this unit standard are able to: check job documentation and
More informationDemonstrate knowledge of servicing automotive air conditioning systems
Demonstrate knowledge of servicing automotive air conditioning systems 24448 version 1 Page 1 of 5 Level 3 Credits 2 Purpose This theory-based unit standard is for people in the automotive repair industry.
More informationConfirm log grades and scale logs
Page 1 of 5 Confirm log grades and scale logs Level 3 Credits 10 Purpose People credited with this unit standard are able to: manage hazards associated with confirming log grades and scaling logs; demonstrate
More informationPOULTRY MANAGEMENT Manage hatchery operations
1 of 5 level: 4 credit: 32 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationStore, maintain, and distribute liquid food or related products using automated systems
Page 1 of 5 Store, maintain, and distribute liquid food or related products using automated systems Level 3 Credits 3 Purpose This unit standard is for people who are currently working, or who intend to
More informationPUBLIC SECTOR COMPLIANCE MANAGEMENT Audit quality management systems for compliance with weights and measures legislation
1 of 6 level: 6 credit: 13 planned review date: December 2006 sub-field: purpose: entry information: accreditation option: moderation option: Public Sector Services People credited with this unit standard
More informationDemonstrate an advanced knowledge of railway signals
Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,
More informationExplain foot and mouth disease controls in the processing of milk in the dairy industry
Page 1 of 5 Explain foot and mouth disease controls in the processing of milk in the dairy industry Level 3 Credits 4 Purpose People credited with this unit are able to: explain the features and characteristics
More informationSECURITY STAFF SERVICES Demonstrate knowledge of and operate electronic equipment as a security officer
1 of 5 level: 3 credit: 5 planned review date: March 2007 sub-field: purpose: Security This unit standard covers the use of electronic equipment for security s. People credited with this unit standard
More informationPRINTING - SCREEN Make ready and print single colour for flat sheet screen printing
1 of 8 level: 3 credit: 40 planned review date: March 2009 sub-field: Printing replacement information: This unit standard, unit standard 5139, unit standard 5140, unit standard 5141, unit standard 5142,
More informationPOULTRY HATCHERY Process day-old poultry chicks
1 of 5 level: 3 credit: 10 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard
More informationSet up, repair and maintain a Baader BA 190 fish filleting machine
Set up, repair and maintain a Baader BA 190 fish filleting machine 17949 version 3 Page 1 of 6 Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 190 fish filleting
More informationSet up, repair and maintain a Baader BA 212CK fish filleting machine
Page 1 of 5 Set up, repair and maintain a Baader BA 212CK fish filleting machine Level 6 Credits 50 Purpose People credited with this unit standard are, for a Baader BA 212CK fish filleting machine, able
More informationGOODS SERVICE Operate a truck mounted sidelifter
1 of 6 level: 3 credit: 6 planned review date: March 2009 sub-field: purpose: entry information: accreditation option: moderation option: Commercial Road Transport People credited with this unit standard
More informationDemonstrate the requirements for holding permits on high voltage electrical equipment
Page 1 of 6 Demonstrate the requirements for holding permits on high voltage electrical equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: describe the requirements
More informationNational Certificate in Concrete Product Manufacture (Masonry Product) (Level 3)
NQF Ref 1530 Version 1 Page 1 of 6 National Certificate in Concrete Product Manufacture (Masonry Product) (Level 3) Level 3 Credits 69 Purpose The National Certificate in Concrete Product Manufacture (Masonry)
More informationInstall and commission high voltage (HV) electricity current transformer metering
Page 1 of 5 Install and commission high voltage (HV) electricity current transformer metering Level 4 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of the
More informationNZQA registered unit standard version 2 Page 1 of 5. Select and use tools and workshop equipment in the industrial textile fabrication industry
Page 1 of 5 Title Select and use tools and workshop equipment in the industrial textile fabrication industry Level 3 Credits 6 Purpose This unit standard is for people entering or working in the industrial
More informationAUTOMOTIVE WORKSHOP ENGINEERING Use an oxy-acetylene welding plant in the motor industry
1 of 5 level: 2 credit: 3 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard and unit standard 21682 replaced unit standard 230 and unit standard 3885.
More informationTrim and limb shelter belts
Page 1 of 5 Trim and limb shelter belts Level 4 Credits 10 Purpose People credited with this unit standard are able to: select and prepare trimming and limbing equipment and machinery; carry out field
More informationDemonstrate knowledge of vegetation fire behaviour
Page 1 of 5 Demonstrate knowledge of vegetation fire behaviour Level 5 Credits 8 Purpose This unit standard is for people with responsibilities for vegetation fire pre-suppression preparedness planning
More informationOutline New Zealand Greenshell mussel (kutai, kuku) farming
Outline New Zealand Greenshell mussel (kutai, kuku) farming 16337 version 3 Page 1 of 5 Level 2 Credits 10 Purpose People credited with this unit standard are able to: identify the Greenshell mussel; describe
More informationOperate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator
Page 1 of 5 Operate a diesel-mechanical/hydraulic railcar/multiple unit on a main line managed by a network operator Level 4 Credits 10 Purpose People credited with this unit standard are able to: prepare
More informationUse advanced felling techniques in arboriculture
Page 1 of 5 Use advanced felling techniques in arboriculture Level 4 Credits 10 Purpose This unit standard is for people wishing to extend their tree felling skills in an arboriculture situation. People
More informationVEHICLE BODYWORK Detail and groom a vehicle
1 of 5 level: 2 credit: 4 planned review date: December 2009 sub-field: purpose: entry information: accreditation option: moderation option: Motor Industry People credited with this unit standard are able
More informationDemonstrate knowledge of wool and the wool scouring process
Demonstrate knowledge of wool and the wool scouring process 2444 version 6 Page 1 of 5 Level 4 Credits 4 Purpose This unit standard is for people working in scouring or a related industry. People credited
More informationMeasure and prune trees around electricity lines for vegetation control to minimum approach distance
Page 1 of 5 Measure and prune trees around electricity lines for vegetation control to minimum approach distance Level 4 Credits 8 Purpose People credited with this unit standard are able to: select tree
More informationROAD TRANSPORT OPERATIONS Manage the transport of overdimension and overweight loads by road
1 of 7 level: 5 credit: 10 planned review date: July 2009 sub-field: purpose: Commercial Road Transport This unit standard is intended for people who are involved with managing the despatch and/or supervision
More informationTest and service hydraulic systems on equipment, vehicles, and/or machines
Page 1 of 5 Test and service hydraulic systems on equipment, vehicles, and/or machines Level 3 Credits 6 Purpose This unit standard is for people in the automotive repair industry. People credited with
More informationCarry out routine maintenance on automotive automatic transmissions
Page 1 of 5 Carry out routine maintenance on automotive automatic transmissions Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited with this unit
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Operate timber treatment plant Level 3 Credits 15 Purpose People credited with this unit standard are able to: manage hazards associated with operating and maintaining timber treatment
More informationApply earths to and remove earths from electrical conductors, plant and equipment
Page 1 of 5 Apply earths to and remove earths from electrical conductors, plant and equipment Level 3 Credits 2 Purpose People credited with this unit standard are able to: demonstrate knowledge of earthing
More informationNZQA registered unit standard version 2 Page 1 of 5. Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident
Page 1 of 5 Title Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: the interrelated
More informationNZQA registered unit standard version 1 Page 1 of 5. Determine and describe construction of medium and large buildings
Page 1 of 5 Title Determine and describe construction of medium and large buildings Level 6 Credits 20 Purpose People credited with this unit standard are able to, for medium and large buildings, determine
More informationControl pests by fumigation in the urban pest management industry
Page 1 of 5 Control pests by fumigation in the urban pest management industry Level 4 Credits 15 Purpose This is a specialist unit standard for people training for the urban pest management industry. People
More informationMeet Approved Handler requirements for the transport of bulk hazardous substances by road
Meet Approved Handler requirements for the transport of bulk hazardous substances by road 25986 version 1 Page 1 of 5 Level 4 Credits 6 Purpose This unit standard is for the drivers of road transport vehicles
More informationNZQA registered unit standard version 5 Page 1 of 5. Manage hazard identification and control on plant and machinery
Page 1 of 5 Title Manage hazard identification and control on plant and machinery Level 4 Credits 4 Purpose People credited with this unit standard are able to describe: hazards associated with plant and
More informationAUTOMOTIVE WORKSHOP ENGINEERING Demonstrate good work habits and perform safe work practices in the motor and related industries
1 of 6 level: 2 credit: 4 planned review date: December 2009 sub-field: Motor Industry replacement information: This unit standard replaced unit standard 226 and unit standard 16098. purpose: entry information:
More informationNZQA registered unit standard version 3 Page 1 of 5. Carry out automated assembly of wood packaging products
Page 1 of 5 Title Carry out automated assembly of wood packaging products Level 3 Credits 5 Purpose People credited with this unit standard are able to: demonstrate knowledge of the health and safety issues
More informationNZQA Expiring unit standard version 6 Page 1 of 5. Operate a clamshell die cutter in the corrugated packaging industry
Page 1 of 5 Title Operate a clamshell die cutter in the corrugated packaging industry Level 3 Credits 8 Purpose People credited with this unit standard are able to: plan ahead, to avoid delays during make
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and service on oil filled distribution power transformers 11kV to 400V
1 of 8 level: 4 credit: 8 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for routine service transformers
More informationDemonstrate and apply knowledge of leading a security team
Demonstrate and apply knowledge of leading a security team 25627 version 1 Page 1 of 7 Level 4 Credits 15 Purpose This unit standard is for security team leaders who are required to lead a team in a security
More informationCheck, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce polystyrene substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check polystyrene
More informationGOODS SERVICE Transport vehicles by road transporter
1 of 5 level: 4 credit: 3 planned review date: March 2009 sub-field: purpose: Commercial Road Transport This unit standard is for drivers of road haulage vehicles carrying vehicles. People credited with
More informationNZQA registered unit standard version 3 Page 1 of 5. Install high voltage (HV) electricity network overhead conductors
Page 1 of 5 Title Install high voltage (HV) electricity network overhead conductors Level 4 Credits 8 Purpose People credited with this unit standard are able to: interpret scope of work for installing
More informationRemove and repair perforated non-structural body panel corrosion damage
Page 1 of 5 Remove and repair perforated non-structural body panel corrosion damage Level 3 Credits 3 Purpose This unit standard is for people who work in the motor body industry. People credited with
More informationOperate a root crop harvester
Page 1 of 5 Operate a root crop harvester Level 4 Credits 20 Purpose People credited with this unit standard are able to: select and prepare root crop harvesting equipment and machinery; carry out field
More informationDEMOLITION Operate a hydraulic excavator on demolition sites
1 of 7 level: 3 credit: 25 planned review date: November 2007 sub-field: purpose: entry information: accreditation option: moderation option: Civil Works and Services People credited with this unit standard
More informationNZQA registered unit standard version 4 Page 1 of 6. Carry out acceptance, commissioning and maintenance tests on power transformers
Page 1 of 6 Title Carry out acceptance, commissioning and maintenance tests on power transformers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare to test power transformers
More informationELECTRICITY SUPPLY - POWER SYSTEM MAINTENANCE Carry out routine inspection and servicing on high voltage minimum oil circuit breakers
1 of 9 level: 4 credit: 6 planned review date: December 2006 sub-field: purpose: entry information: Electricity Supply People credited with this unit standard are able to: prepare for inspection, testing
More informationCONSTRUCTION HEALTH AND SAFETY, AND INJURY PREVENTION Prevent hazards when working with cranes, lifting appliances and rigging on construction sites
1 of 7 level: 4 credit: 4 planned review date: December 2003 sub-field: purpose: Construction People credited with this unit standard are able to: identify different types of rigging and lifting work for
More informationNZQA registered unit standard version 5 Page 1 of 5. Make and repair a boat cockpit canopy and side curtains
Page 1 of 5 Title Make and repair a boat cockpit canopy and side curtains Level 4 Credits 10 Purpose This unit standard is for people who work in the industrial textile fabrication industry. People credited
More informationPEST MONITORING Design a possum population monitoring programme
1 of 5 level: 5 credit: 10 planned review date: November 2007 sub-field: purpose: Pest Management This unit standard is for people involved with designing possum population monitoring s for rural environments.
More informationCarry out acceptance and maintenance tests on distance protection relays
Page 1 of 5 Carry out acceptance and maintenance tests on distance protection relays Level 5 Credits 4 Purpose People credited with this unit standard are able to: prepare for acceptance and maintenance
More informationFLORISTRY Create floristry designs using a base medium
1 of 7 level: 4 credit: 20 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Horticulture People credited with this unit standard are able
More informationIRRIGATION Demonstrate knowledge of irrigation systems, components, and performance
1 of 5 level: 4 credit: 6 planned review date: August 2006 sub-field: purpose: entry information: accreditation option: moderation option: Water Industry People credited with this unit standard are able
More informationPlan and manage helicopter overhead lines operation
Page 1 of 5 Plan and manage helicopter overhead lines operation Level 5 Credits 10 Purpose People credited with this unit standard are able, for helicopter overhead lines operations, to: plan; organise
More informationInstruct a programme using low ropes course activities
Page 1 of 5 Instruct a programme using low ropes course activities Level 5 Credits 5 Purpose People credited with this unit standard are able to: prepare for instructing low ropes course activities; instruct
More informationThis unit standard is expiring
Page 1 of 5 Title Apply intelligence analysis techniques to complete an intelligence product Level 5 Credits 15 Purpose People credited with this unit standard are able to: define the intelligence problem
More informationExplain hatchery techniques used in the New Zealand aquaculture industry
Page 1 of 5 Explain hatchery techniques used in the New Zealand aquaculture industry Level 4 Credits 15 Purpose People credited with this unit standard are able to explain: the conditioning and management
More informationCheck, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site
Page 1 of 5 Check, coat and reinforce fibre cement substrate to form a Proprietary Plaster Cladding System on site Level 3 Credits 20 Purpose People credited with this unit standard are able to: check
More informationCarry out general service checks on non-electric forklifts and forklift attachments
Page 1 of 5 Carry out general service checks on non-electric forklifts and forklift attachments Level 3 Credits 4 Purpose This unit standard is for people in the materials handling equipment repair industry.
More informationPrepare a schedule of quantities, cost estimate and tender documentation for landscape work
Page 1 of 5 Prepare a schedule of quantities, cost estimate and tender documentation for landscape work Level 5 Credits 15 Purpose This unit standard is for people working, or intending to work, in landscaping.
More informationFLORISTRY Create floristry designs using hand tied techniques
1 of 7 level: 3 credit: 20 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Horticulture People credited with this unit standard are able
More informationSECURITY STAFF SERVICES Demonstrate knowledge of protective. Security
1 of 6 level: 3 credit: 7 planned review date: March 2007 sub-field: purpose: Security This unit standard is for people who work or intend to work in. People credited with this unit standard are able to:
More informationTransport horses by road
Page 1 of 5 Transport horses by road Level 4 Credits 25 Purpose This unit standard is for drivers of road transport vehicles carrying horses. People credited with this unit standard are able to: describe
More informationNZQA Expiring unit standard version 4 Page 1 of 7. Make ready a flat bed die cutter in the corrugated packaging industry
Page 1 of 7 Title Make ready a flat bed die cutter in the corrugated packaging industry Level 3 Credits 25 Purpose People credited with this unit standard are able to: set up a hopper for a flat bed die
More informationNZQA registered unit standard version 2 Page 1 of 5. Complete pre-competition preparations as an official at a competitive sports event
Page 1 of 5 Title Complete pre-competition preparations as an official at a competitive sports event Level 3 Credits 3 Purpose This unit standard is designed primarily for people seeking to further develop
More informationManage electricity generation dispatch
Page 1 of 6 Manage electricity generation dispatch Level 6 Credits 10 Purpose People credited with this unit standard are able to: demonstrate knowledge of principles of power system operation; identify
More informationNZQA registered unit standard version 1 Page 1 of 5
Page 1 of 5 Title Slice and package bread in a plant bakery Level 4 Credits 10 Purpose This unit standard is for people working or intending to work in a plant bakery as a baking tradesperson. People credited
More informationCarry out routine inspection and servicing on substation emergency services
Page 1 of 6 Carry out routine inspection and servicing on substation emergency services Level 3 Credits 4 Purpose People credited with this unit standard are able to: prepare for inspection and servicing
More informationRIGGING Complete basic rigging work
1 of 5 level: 2 credit: 35 planned review date: December 2010 sub-field: purpose: entry information: accreditation option: moderation option: Lifting Equipment People credited with this unit standard are
More informationManage the transportation of hazardous substances by road
Manage the transportation of hazardous substances by road Page 1 of 5 Level 6 Credits 10 Purpose This unit standard is for carriers of goods service vehicles carrying hazardous substances. People credited
More informationNZQA registered unit standard version 2 Page 1 of 5. Generate chlorine dioxide for wood pulp bleaching
Page 1 of 5 Title Generate chlorine dioxide for wood pulp bleaching Level 5 Credits 15 Purpose People credited with this unit standard are able to: explain fundamentals of chlorine dioxide generation;
More informationDescribe practices to maintain the quality of perishable products during transport by road
Page 1 of 5 Describe practices to maintain the quality of perishable products during transport by road Level 3 Credits 5 Purpose This unit standard is for those who drive, or intend to drive, road transport
More informationMaintain amenity trees and shrubs
Page 1 of 5 Maintain amenity trees and shrubs Level 3 Credits 8 Purpose People credited with this unit standard are able to: control weeds and ground cover under amenity trees and shrubs; describe irrigation
More informationProvide career consultation to career consultation clients
Page 1 of 5 Provide career consultation to career consultation clients Level 5 Credits 20 Purpose People credited with this unit standard are able to: establish rapport with clients in the career consultation
More informationNZQA registered unit standard version 2 Page 1 of 6. Demonstrate professional and ethical behaviour as an engineering technician
Page 1 of 6 Title Demonstrate professional and ethical behaviour as an engineering technician Level 6 Credits 15 Purpose This unit standard is intended for people working towards the New Zealand Diploma
More informationThis unit standard is expiring
Page 1 of 5 Title Prepare edible green bovine offal products for packaging Level 2 Credits 10 Purpose This entry level unit standard is for people who are employed in the offal department of meat processing
More informationNZQA registered unit standard version 4 Page 1 of 5. Forestry > Tree Felling
Page 1 of 5 Title Fell trees safely using a chainsaw Level 3 Credits 10 Purpose People completing this unit standard will have the skills required to safely fell individual trees using basic techniques.
More informationNZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of costs to the pricing of a road transport service
Page 1 of 5 Title Demonstrate and apply knowledge of costs to the pricing of a road transport service Level 5 Credits 7 Purpose This unit standard is intended for people who are required to prepare quotes
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Display products in the salon environment Level 2 Credits 3 Purpose This unit standard is for entry-level learners working and intending to work in a salon People credited with this unit
More informationEstablish quality requirements, manage, and monitor the installation of subdivision infrastructure
Page 1 of 5 Establish quality requirements, manage, and monitor the installation of subdivision infrastructure Level 6 Credits 18 Purpose This unit standard is for people who are working, or who intend
More informationNZQA registered unit standard 9506 version 5 Page 1 of 5. Conduct a sample analysis in a petrochemical laboratory
Page 1 of 5 Title Conduct a sample analysis in a petrochemical laboratory Level 4 Credits 6 Purpose This unit standard is for people employed in the petrochemical industry. People credited with this unit
More informationLOGISTICS OPERATIONS Plan distribution centre structure and equipment for a logistics operation
1 of 5 level: 5 credit: 8 planned review date: February 2004 sub-field: purpose: entry information: accreditation option: moderation option: Logistics People credited with this unit standard are able to:
More informationCarry out routine inspection and servicing on high voltage bulk oil circuit breakers
Page 1 of 6 Carry out routine inspection and servicing on high voltage bulk oil circuit breakers Level 4 Credits 6 Purpose People credited with this unit standard are able to: prepare for inspection, testing
More informationNZQA registered unit standard 5555 version 6 Page 1 of 5
Page 1 of 5 Title Arrange and manage a visitor conference Level 5 Credits 20 Purpose People credited with this unit standard are able to: plan operations for a visitor conference; manage monetary, human
More informationNATIONAL CERTIFICATE in 1 of 5
NATIONAL CERTIFICATE in 1 of 5 level of qualification: 4 credit total: 135 level 3 credits: 26 level 4 credits: 77 level 5 credits: 32 registration date: 24 July 2001 planned review date: 31 July 2005
More informationNZQA registered unit standard version 2 Page 1 of 5
Page 1 of 5 Title Assess the optimisation of a drinking-water treatment plant, and describe critical control points Level 5 Credits 10 Purpose People credited with this unit standard are able to: assess
More informationNZQA registered unit standard version 4 Page 1 of 5
Page 1 of 5 Title Demonstrate the requirements for holding access permits for work on high voltage electrical lines, cables, and equipment Level 3 Credits 4 Purpose People credited with this unit standard
More informationDemonstrate knowledge of the principles of organic horticultural production
Demonstrate knowledge of the principles of organic horticultural production 21043 version 1 Page 1 of 5 Level 3 Credits 20 Purpose People credited with this unit standard are able to: demonstrate knowledge
More informationNZQA registered unit standard version 1 Page 1 of 5. Develop, implement and review a HACCP application for a food processing operation
Page 1 of 5 Title Develop, implement and review a HACCP application for a food processing operation Level 5 Credits 20 Purpose This unit standard is for experienced people required to have in-depth knowledge
More informationNZQA registered unit standard 6945 version 7 Page 1 of 5. Forestry > Forest Mechanised Harvesting
Page 1 of 5 Title Fell trees using a mechanised harvesting machine Level 4 Credits 20 Purpose This unit standard is intended for people employed in a mechanised tree felling role in a forestry harvesting
More information