Summary of Published Material Properties
|
|
- Melvyn Taylor
- 6 years ago
- Views:
Transcription
1 Summary of Published Material Properties The values listed in this doment are summaries and/or average properties. For full statistical reduction and domentation visit PUBLISHED NCAMP MATERIALS PAGE RESIN FIBER FORM Hecel 855 AS4 Unidirectional tape 4 Hecel 855 AS4 Plain weave fabric 6 Hecel 855 IM7-G k Unidirectional tape 8 NB 4708 MR60H Unidirectional tape 0 Cytec MTM45- Tena-J HTS40 E3 Plain weave fabric Cytec MTM S- 8-harness satin weave fabric 4 Cytec MTM45- E-Glass harness satin weave fabric UPCOMING NCAMP MATERIALS RESIN FIBER FORM Tencate TC50 HTS40 Plain weave fabric Cytec MTM45- IM7 Unidirectional tape Cytec MTM45- HTS40 Unidirectional tape Cytec MTM45- AS4 Unidirectional tape Cytec 530- T650 Plain weave fabric Cytec 530- T650 Unidirectional tape Cytec EP0 IM7 Unidirectional tape Cytec EP0 T650 Plain weave fabric WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
2 HEXCEL AS4/855 UNIDIRECTIONAL TAPE SUMMARY Material Fiber Hecel AS4/855 unidirectional tape AS4 Unidirectional Resin Hecel 855 Ma Operating Temperare 50 F T g (Dry and wet) 400 F (dry), 3 F (wet) Average Fiber Areal Weight 90 g/m Material Specification NMS 8/ Process Specification NPS 88 AVERAGE LAMINA NORMALIZED* PROPERTIES -65 F, dry 70 F, dry 50 F, wet t E [Msi] su F (0.%) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
3 AVERAGE LAMINATE NORMALIZED* PROPERTIES Lay-Up (%0 /%+45 /%90 ) -65 F, dry 70 F, dry 50 F, wet oht ohc fht F fhc [ksi] bro F (% offset) [ksi] (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) F z [ksi] (5/50/5) cai F [ksi] (5/50/5) ilt (5/50/5) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
4 HEXCEL AS4 3K/855 PLAIN WEAVE SUMMARY Material Fiber Hecel AS4 3k/855 plain weave AS4 3K Plain Weave Resin Hecel 855 Ma Operating Temperare T g (Dry and wet) 50 F 397 F (dry), 33 F (wet) Average Fiber Areal Weight 93 g/m Material Specification NMS 8/3 Process Specification NPS 88 AVERAGE LAMINA NORMALIZED* PROPERTIES -65 F, dry 70 F, dry 50 F, dry 50 F, wet t E [Msi] su F (0.%) [ksi] * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
5 AVERAGE LAMINATE NORMALIZED* PROPERTIES Lay-Up (%0 /%+45 /%90 ) -65 F, dry 70 F, dry 50 F, wet oht ohc fht F fhc [ksi] bro F (% offset) [ksi] (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) F z [ksi] (5/50/5) cai F [ksi] (5/50/5) ilt (5/50/5) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
6 HEXCEL IM7/855 UNIDIRECTIONAL TAPE SUMMARY Material Fiber Hecel IM7/855 unidirectional tape IM7-G k unidirectional Resin Hecel 855 Ma Operating Temperare 50 F T g (Dry and wet) 406 F (dry), 3 F (wet) Average Fiber Areal Weight 90 g/m Material Specification NMS 8/ Process Specification NPS 88 AVERAGE LAMINA NORMALIZED* PROPERTIES -65 F, dry 70 F, dry 50 F, wet t E [Msi] su F (0.%) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
7 AVERAGE LAMINATE NORMALIZED* PROPERTIES Lay-Up (%0 /%+45 /%90 ) -65 F, dry 70 F, dry 50 F, wet oht ohc fht F fhc [ksi] bro F (% offset) [ksi] (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) (5/50/5) (0/80/0) (50/40/0) F z [ksi] (5/50/5) ilt (5/50/5) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
8 NEWPORT MR60H/ NCT4708 UNIDIRECTIONAL TAPE SUMMARY Material Fiber Newport MR60H/ NCT4708 unidirectional tape MR60H Resin NB 4708 Ma Operating Temperare T g (Dry and wet) F re resin system 98 F (dry), 39 F (wet) Average Fiber Areal Weight 300 g/m Material Specification NMS4708/ Process Specification NPS 4708 AVERAGE LAMINA NORMALIZED* PROPERTIES -65 F, dry 70 F, dry 80 F, dry 80 F, wet t E [Msi] su F (0.%) * Normalized when applicable; normalizing red ply thickness of 0.06 in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
9 AVERAGE LAMINATE NORMALIZED* PROPERTIES Lay-Up (%0 /%+45 /%90 ) -65 F, dry 70 F, dry 80 F, wet oht ohc fht F fhc [ksi] bro F (% offset) [ksi] (5/50/5) (9/73/8) (55/36/9) (5/50/5) (9/73/8) (55/36/9) (5/50/5) (9/73/8) (55/36/9) (5/50/5) (9/73/8) (55/36/9) (5/50/5) (9/73/8) (55/36/9) (5/50/5) (9/73/8) (55/36/9) (5/50/5) (9/73/8) (55/36/9) F z [ksi] (5/50/5) cai F [ksi] (5/50/5) ilt (5/50/5) * Normalized when applicable; normalizing red ply thickness of 0.06 in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
10 HTS40 E3 3K/MTM45- PLAIN WEAVE FABRIC SUMMARY Material Fiber Resin HTS40 E3 3k/MTM45- plain weave fabric Tena-J HTS40 E3 3K 00TEX (previous trade name of G k HTA-7C EP03) Cytec MTM45- Ma Operating Temperare --- T g (Dry and wet) 360 F (dry), 30 F (wet) Average Fiber Areal Weight 93 g/m Material Specification NMS 45/3 Process Specification NPS 845 AVERAGE LAMINA NORMALIZED* PROPERTIES -65 F, dry 70 F, dry 00 F, wet 50 F, wet t E [Msi] su F (0.%) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
11 AVERAGE LAMINATE NORMALIZED* PROPERTIES Lay-Up (%0 /%+45 /%90 ) -65 F, dry 70 F, dry 00 F, wet 50 F, wet oht ohc fht F fhc [ksi] bro F (% offset) [ksi] (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) (5/50/5) (0/80/0) (40/0/40) F z [ksi] (5/50/5) cai F [ksi] (5/50/5) ilt (5/50/5) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
12 678 S-/MTM45-8-HARNESS SATIN WEAVE FABRIC SUMMARY Material Fiber Resin 678 S-/MTM45-8-harness satin weave fabric JPS Glass (fabric)/agy (fiber): SCG75 /0.0Z Cytec MTM45- Ma Operating Temperare --- T g (Dry and wet) 39 F (dry), 34 F (wet) Average Fiber Areal Weight 98 g/m Material Specification NMS 45/ Process Specification NPS 845 AVERAGE LAMINA NORMALIZED* PROPERTIES -65 F, dry 70 F, dry 00 F, wet 50 F, wet t E [Msi] su F (0.%) * Normalized when applicable; normalizing red ply thickness of 0.00 in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
13 AVERAGE LAMINATE NORMALIZED* PROPERTIES Lay-Up (%0 /%+45 /%90 ) -65 F, dry 70 F, dry 00 F, wet 50 F, wet (5/50/5) (5/50/5) (5/50/5) oht (0/80/0) (40/0/40) ohc (5/50/5) (0/80/0) (40/0/40) fht (5/50/5) fhc F [ksi] (5/50/5) bro F (% offset) (5/50/5) F z [ksi] (5/50/5) cai F [ksi] (5/50/5) ilt (5/50/5) * Normalized when applicable; normalizing red ply thickness of 0.00 in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
14 E-GLASS 778/MTM45-8-HARNESS SATIN WEAVE FABRIC SUMMARY Material E-Glass 778/MTM45-8- harness satin weave fabric Fiber Resin 778 E Glass fabric (common name: GF003-35%RW) Cytec MTM45- Ma Operating Temperare --- T g (Dry and wet) 356 F (dry), 30 F (wet) Average Fiber Areal Weight 93 g/m Material Specification NMS 45/4 Process Specification NPS 845 AVERAGE LAMINA NORMALIZED* PROPERTIES -65 F, dry 70 F, dry 00 F, wet 50 F, wet t E [Msi] su F (0.%) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
15 AVERAGE LAMINATE NORMALIZED* PROPERTIES Lay-Up (%0 /%+45 /%90 ) -65 F, dry 70 F, dry 00 F, wet 50 F, wet (5/50/5) (5/50/5) (5/50/5) oht (0/80/0) (40/0/40) ohc (5/50/5) (0/80/0) (40/0/40) fht (5/50/5) fhc F [ksi] (5/50/5) bro F (% offset) (5/50/5) [ksi] F z [ksi] (5/50/5) cai F [ksi] (5/50/5) ilt (5/50/5) * Normalized when applicable; normalizing red ply thickness of in. WICHITA STATE UNIVERSITY NATIONAL CENTER FOR ADVANCED MATERIALS PERFORMANCE 845 Fairmount St Wichita, Kansas tele: (36) fa: (36) web:
Hexcel 8552 AS4 Unidirectional Prepreg at 190 gsm & 35% RC Qualification Material Property Data Report
NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University CAM-RP-- April 4, Revision N/C Hexcel 855 AS4 Unidirectional Prepreg at 9 gsm & 5% RC Qualification Material Property Data Report FAA Special
More informationDocument No.: NMS 128/2, Revision A, June 21 th, 2011
NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University Document No.: NMS 128/2, Revision A, June 21 th, 2011 NCAMP Material Specification This specification is generated and maintained in accordance
More informationHexcel 8552S AS4 Plain Weave Fabric Prepreg 193 gsm & 38% RC Qualification Material Property Data Report
NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University CAM-RP--6 April 4, Revision N/C Hexcel 855S AS4 Plain Weave Fabric Prepreg 9 gsm & 8% RC Qualification Material Property Data Report FAA
More informationDocument No.: NMS 688/2 Rev C, September 26, 2016
Date: September 26, 2016 Document No.:, September 26, 2016 NCAMP Material Specification This specification is generated and maintained in accordance with NCAMP Standard Operating Procedures, NSP 100 265ºF
More informationDocument No.: NMS 128/3, Revision A, June 21 th, 2011
NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University Document No.: NMS 128/3, Revision A, June 21 th, 2011 NCAMP Material Specification This specification is generated and maintained in accordance
More informationPolymer Matrix Composites: Materials Properties
Composite Materials Handbook Volume 2 CMH-17 COMPOSITE MATERIALS HANDBOOK Volume 2 Polymer Matrix Composites: Materials Properties The Composite Materials Handbook, referred to by industry groups as CMH-17,
More informationDocument No.: NPS NCAMP Process Specification. Fabrication of NMS 688 Qualification, Equivalency, and Acceptance Test Panels (TenCate TC250)
Date: July 29, 2008 Document No.: NPS 81688 NCAMP Process Specification Fabrication of NMS 688 Qualification, Equivalency, and Acceptance Test Panels (TenCate TC250) Prepared by: Barry Meyers (TenCate),
More informationMECHANICAL CHARACTERIZATION OF STRETCH BROKEN CARBON FIBER MATERIALS IM7 FIBER IN 8552 RESIN
MECHANICAL CHARACTERIZATION OF STRETCH BROKEN CARBON FIBER MATERIALS IM7 FIBER IN 8552 RESIN Guenther Jacobsen Hexcel Corporation 6700 W. 5400 S. Salt Lake City, UT 84118 ABSTRACT Interest in aligned discontinuous
More informationLockheed Martin Process Equivalency Test Plan For Hexcel 8552 IM7 Unidirectional Prepreg at 190 gsm & 35% RC
Material Supplier Contact: Steve Ellery Marketing Manager, Americas Matrix Hexcel Corporation Tel: (801) 508-8037 Fax: (801) 508-8405 Email: steve.ellery@hexcel.com Lockheed Martin Contact: Rich Coulter,
More informationDocument No.: NPS NCAMP Process Specification
Date: November 10, 2014 Document No.: NPS 85321 NCAMP Process Specification Fabrication of NMS 532 Qualification, Equivalency, and Acceptance Test Panels (Cytec Cycom 5320-1) Prepared by: Amy Buxman (Cytec),
More informationDATA SHEET CARBON FABRIC
CARBON FABRIC Carbon fiber, also referred to as graphite fiber, is one of the strongest and stiffest reinforcements available. When properly engineered, carbon fiber advanced composites can achieve the
More informationBurnham Composites Process Equivalency Test Plan For Cytec Cycom K70PW T650 fabric with 36% RC
Material Supplier Contact: Kim Gingras Program Manager Business Jet & Rotorcraft Cytec Engineered Materials Tel: (410) 939-8172 Email: kim.gingras@cytec.com Burnham Composites Contact: Darrel Dugan Burnham
More informationSPECIALTY MATERIALS, INC.
DETERMINATION OF CROSS-PLY LAMINATE STACKING SEQUENCE FOR THE COMPRESSION STRENGTH TESTING OF A UNIDIRECTIONAL BORON EPOXY MATERIAL Submitted to SAMPE Fall Technical Conference Dallas, November 6-9, 2006
More informationMaterial Property Data Acquisition and Qualification Test Plan For Hexcel 8552 IM7 Unidirectional Prepreg at 190 gsm & 35% RC
Material Supplier Contact: Steve Ellery Marketing Manager, Americas Matrix Hexcel Corporation Tel: (801) 508-8037 Fax: (801) 508-8405 Email: steve.ellery@hexcel.com Cessna Aircraft Company Contact: Engin
More informationPark Advanced Composite Materials. E-752-LT Epoxy Prepreg. Product Overview. Applications / Qualifications. Key Features & Benefits
E-752-LT Epoxy Prepreg Product Overview Park s E 752 LT is a toughened; 350 F (177 C) cure epoxy resin system with 315 F (157 C) wet Tg for primary and secondary structural applications. E 752 LT is formulated
More informationCYCOM Epoxy Resin System
T E C H N I C A L D A T A S H E E T CYCOM 9773 EPOXY RESIN SYSTEM CYCOM 9773 Epoxy Resin System DESCRIPTION CYCOM 9773 is a 350 F (177 C) curing resin. It is a toughened epoxy resin with 350 F (177 C)
More informationStatistics for Allowable Generation. Statistically Based Material Allowables (Not Design Values) CMH-17 statistical analysis methods
Statistics for Allowable Generation Statistically Based Material Allowables (Not Design Values) CMH-17 statistical analysis methods September 14-16, 2010 A- and B-basis Values Design values must be chosen
More informationAdvanced Composite Materials
Advanced Composite Materials Moscow, 2017 About Company Prepreg-ACM is a Rusnano portfolio company founded in 2009; The company is producing wide range of unidirectional, bidirectional woven and non-woven
More informationCYCOM 2020 EPOXY PREPREG
DESCRIPTION CYCOM 2020 is a versatile curing, toughened epoxy resin that can be cured from 180 F to 350 F (80 C to 180 C), depending on service temperature requirements. This prepreg resin extracts the
More informationTECHNICAL DATA SHEET APC (PEKK-FC) PEKK-FC THERMOPLASTIC POLYMER PREPREG
Solvay s composites consist of a thermoplastic matrix of poly (ether-ketone-ketone) commonly referred to as PEKK-FC polymer with aligned, continuous unidirectional fiber reinforcement. The tapes are fully
More informationSIGRAFIL C. The PAN-Based Carbon Fiber. Carbon Fibers. Broad Base. Best Solutions.
The PAN-Based Carbon Fiber Carbon Fibers Broad Base. Best Solutions. Carbon Fibers & Composite Materials Unique Integrated Value Chain We are SGL Group The Carbon Company, one of the worldwide leading
More informationA RAPID HEATING PROCESS FOR OUT-OF-AUTOCLAVE CURING OF TOUGHENED EPOXY PREPREGS
A RAPID HEATING PROCESS FOR OUT-OF-AUTOCLAVE CURING OF TOUGHENED EPOXY PREPREGS Dale Brosius and Benjamin Luedtke, Quickstep Composites LLC Karl Gruenberg, Vector Composites, Inc. 3251 McCall Street Dayton,
More informationAdvanced General Aviation Transport Experiments
Advanced General Aviation Transport Experiments B-Basis Design Allowables for Wet Layup / Field Repair Fiber Reinforced Composite Material Systems 7781 Glass Fabric / MGS 418 AGATE-WP3.3-033051-114 August
More informationAdvanced General Aviation Transport Experiments
Advanced General Aviation Transport Experiments A Basis and B Basis Design Allowables for Epoxy Based Prepreg TORAY T700GC-12K-31E/#2510 Unidirectional Tape [US Units] AGATE-WP3.3-033051-132 November 2002
More informationPREPREG System BX Low-temperature. Tooling Structural parts
PREPREG System BX Low-temperature Tooling Structural parts Overview on mold making Metal and fiber composite molds are used to manufacture components from PREPREG materials. Fiber composite molds are produced
More informationCycom Modified Cyanate Prepreg System
TECHNICAL DATA SHEET AEROSPACE MATERIALS Cycom 55-2 Modified Cyanate Prepreg System DESCRIPTION The Rigidite 55-2 Prepreg System is a 350 F (177 C) curing modified cyanate ester resin. This system has
More informationRecently acquired by. Recently acquired by
Umeco Raw Materials Production Intermediate Processing Parts Manufacture Reinforcement Fibre Preparation Glass Aramid Carbon Unidirectional Woven Chopped Mat Prepregging Moulding (Layup) Resin Curing Basic
More informationOPTIMAL COMPOSITE MATERIAL FOR LOW COST FABRICATION OF LARGE COMPOSITE AEROSPACE STRUCTURES USING NASA RESINS OR POSS NANOPARTICLE MODIFICATIONS
OPTIMAL COMPOSITE MATERIAL FOR LOW COST FABRICATION OF LARGE COMPOSITE AEROSPACE STRUCTURES USING NASA RESINS OR POSS NANOPARTICLE MODIFICATIONS MARK A. LAMONTIA AND MARK B. GRUBER Accudyne Systems, Inc.,
More informationCYCOM 2237 POLYIMIDE RESIN SYSTEM
DESCRIPTION CYCOM 2237 is Cytec Engineered Materials version of PMR-5. It is formulated for high temperature applications where low void content is critical. CYCOM 2237 has the best overall balance of
More informationContinuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications
Continuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications Thomas Smith, President TenCate Performance Composites Kipp Grumm, PE Advanced Development
More informationA presentation by Sylvain Delalande JEC, March, 31 st, 2011
A presentation by Sylvain Delalande JEC, March, 31 st, 2011 Hexcel Leader in Advanced Composites Hexcel Product Key Input Carbon Fiber Acrylonitrile Comp posite Materials Segment Reinforcements Carbon
More informationNew Thermoplastic Tapes and Processes Target Cost. Jim Mondo TenCate Advanced Composites SME Advanced Thermoplastic Composites Seminar April 6, 2017
New Thermoplastic Tapes and Processes Target Cost Jim Mondo TenCate Advanced Composites SME Advanced Thermoplastic Composites Seminar April 6, 2017 TenCate Thermoplastic Composites TenCate Advanced Thermoplastic
More informationAVIMID R POLYIMIDE COMPOSITE
DESCRIPTION AVIMID R is a high temperature, 581 F (305 C) Tg*, thermoset polyimide resin with good 500 F (260 C) wet and 550 F (288 C) dry service capability. AVIMID R has outstanding thermal oxidative
More informationANALYSIS OF FORMABILITY OF THICK COMPOSITE COMPONENT UNDER DOUBLE- DIAPHRAGM FORMING PROCESS
ANALYSIS OF FORMABILITY OF THICK COMPOSITE COMPONENT UNDER DOUBLE- DIAPHRAGM FORMING PROCESS Hassan Alshahrani Mehdi Hojjati Concordia Center for Composites, Concordia Center for Composites, 1455 De Maisonneuve
More informationCURVED BEAM TEST BEHAVIOR OF 3D WOVEN COMPOSITES
CURVED BEAM TEST BEHAVIOR OF 3D WOVEN COMPOSITES Christopher Redman, Harun Bayraktar, Michael McClain Albany Engineered Composites 112 Airport Drive Rochester, NH 03867 ABSTRACT The use of traditional
More informationMANUFACTURING FLAT AND CYLINDRICAL LAMINATES AND BUILT UP STRUCTURE USING AUTOMATED THERMOPLASTIC TAPE LAYING, FIBER PLACEMENT, AND FILAMENT WINDING
MANUFACTURING FLAT AND CYLINDRICAL LAMINATES AND BUILT UP STRUCTURE USING AUTOMATED THERMOPLASTIC TAPE LAYING, FIBER PLACEMENT, AND FILAMENT WINDING Mark A. Lamontia, Steve B. Funck, Mark B. Gruber, Ralph
More informationChopped Prepregs - A Compelling Performance and Cost Alternative Material Form
Chopped Prepregs - A Compelling Performance and Cost Alternative Material Form Tencate Advanced Composites CCS Composites, LLC 2450 Cordelia Road - Fairfield, CA 94534 info@tcac-usa.com www.tencateadvancedcomposites.com
More informationCarbon Fiber SMC Technology for Lightweight Structures
Carbon Fiber SMC Technology for Lightweight Structures Matt Kaczmarczyk Senior Design Engineer Quantum Composites- AS9100C:2009 / ISO9001:2008 1310 South Valley Center Drive Bay City, Michigan 48706-9798
More informationA design methodology using bi-angle ply laminates made from NCF carbon fiber materials
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS A design methodology using bi-angle ply laminates made from NCF carbon fiber materials 1 - General vision of NCF Th. Massard *1, R. Harry 2, Ph. Sanial
More informationEpoxide equivalent weight ASTM D 1652 g/eq C (77 F), Brookfield ASTM D 2196 cp or mpa.s 650
Starting Formulation EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Epoxy Resin System for Infusion and RTM EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Introduction EPON FlameX
More informationMODELING OF HARNESS SATIN WEAVE USING FINITE ELEMENT METHOD
16 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS MODELING OF HARNESS SATIN WEAVE USING FINITE ELEMENT METHOD Yutaka Arimitsu, Masahiro Eki, Yuji Sogabe, Zhiqiang Wu Ehime University Keywords: textile
More informationof-autoclave Innovation for Advanced Composites Fabrication
Quickstep: An Out-of of-autoclave Innovation for Advanced Composites Fabrication Presented by: Dale Brosius, Chief Operating Officer, Quickstep Technologies We will begin the webinar at 1:00EST Please
More informationMARK B. GRUBER and MARK A. LAMONTIA Accudyne Systems, Inc., 134B Sandy Drive, Newark, DE, USA19713
THE FABRICATION AND PERFORMANCE OF RING- STIFFENED CYLINDERS MANUFACTURED BY A COMBINED IN SITU AUTOMATED THERMOPLASTIC FILAMENT WINDING AND TAPE LAYING PROCESS MARK B. GRUBER and MARK A. LAMONTIA Accudyne
More informationDiscoTex : Highly Formable Carbon Fiber Fabric
DiscoTex : Highly Formable Carbon Fiber Fabric Elizabeth K. Goodine Pepin Associates 15 Log Home Rd Greenville, ME 04441 ABSTRACT The aerospace structures community continues to face manufacturing, performance,
More informationToho Tenax Americas Carbon Fiber Presentation Carlos Leao Leutewiler Sales and Marketing Manager South America October, 2017
Toho Tenax Americas Carbon Fiber Presentation Carlos Leao Leutewiler Sales and Marketing Manager South America October, 2017 cleutewiler@tohotenax-us.com Mobile: +5511 98706-1766 2. Company Overview
More informationSAMPE Brazil Conference Presentation prepared by: M. Alexander Roth, Dr.-Ing.
Experimental and numerical analysis under axial and bending loading of hollow and foam filled A-profiles as stiffener concept for FRP structures for the aerospace industry SAMPE Brazil Conference 2014
More informationCYCOM 7668 EPOXY RESIN
DESCRIPTION CYCOM 7668 resin is a curing flame retardant epoxy formulated for use with fiberglass in structural laminates and sandwich panels for aircraft exteriors. Woven fabric impregnated with 7668
More informationComparison of Novel Resin Transfer Moulding, Pre-Preg Autoclave and Metallic CNC Manufacturing for UAV Spars. Composites Centre
Comparison of Novel Resin Transfer Moulding, Pre-Preg Autoclave and Metallic CNC Manufacturing for UAV Spars ICMAC Belfast 18 th March 2009 Andrew Mills, James Hurley SAS Cranfield University a.r.mills@cranfield.ac.uk
More informationInvestigation of influence of tab types on tensile strength of E-glass/epoxy fiber reinforced composite materials
Available online at www.sciencedirect.com Procedia Engineering 10 (2011) 3279 3284 ICM11 Investigation of influence of tab types on tensile strength of E-glass/epoxy fiber reinforced composite materials
More informationManufacturIng. ng of Thermoplastics
Development and INnovation for Advanced ManufacturIng ng of Thermoplastics Mid-Term Achievements of work by Patrice LEFEBURE _ EADS CCR (patrice.lefebure@ eads.net) C. QUINQUIS _ A-F, S. KASCHEL _ A-D,
More informationRM-3004 OUT OF AUTOCLAVE PROCESSABLE BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS
RM-3004 OUT OF AUTOCLAVE PROCESSABLE BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS RM-3004 Out of Autoclave (OOA) Processable Bismaleimide (BMI) Prepreg Product Information Developed
More informationModule 1: Introduction to Composites. Lecture 7: Fabrication Processes. The Lecture Contains: Wet/Hand Lay-Up. Spray Lay-Up.
The Lecture Contains: Wet/Hand Lay-Up Spray Lay-Up Autoclave Curing Filament Winding Pultrusion References file:///d /Web%20Course%20(Ganesh%20Rana)/Dr.%20Mohite/CompositeMaterials/lecture7/7_1.htm[8/18/2014
More informationHexForce and HexPly Aerospace Selector Guide
HexForce and HexPly Aerospace Selector Guide European version About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of
More informationTextile Technologies. Carbon Textiles Solutions. Global Partners
Carbon Textiles Solutions SAMPE Brazil Application and Processing of Complex Fabrics for Lightweight structures Joanne Blakeley Development Engineer, Sigmatex UK Tel: +44 (0) 1928 570050 Email: joanne.blakeley@sigmatex.co.uk
More informationSignificance of stainless steel wire reinforcement on the mechanical properties of GFRP composites
Significance of stainless steel wire reinforcement on the mechanical properties of GFRP composites K. Pazhanivel #1, G.B. Bhaskar *2, A.Elayaperumal @3 # Department of Mechanical Engineering, Thiruvalluvar
More informationEffect of PEK Content on Fracture Toughness of Glass Woven Fabric / Phenolic Resin Composites
Effect of PEK Content on Fracture Toughness of Glass Woven Fabric / Phenolic Resin Composites Y.Q. Sun 1,2, J.H. Li, 2 J.B. Wang, 2 S.R. Zheng 3 and M.L. Sun 3 1 Laboratory for Nonlinear Mechanics of Continuous
More informationComparison of Tensile Fatigue Resistance and Constant Life Diagrams for Several Potential Wind Turbine Blade Laminates
Comparison of Tensile Fatigue Resistance and Constant Life Diagrams for Several Potential Wind Turbine Blade Laminates Daniel D. Samborsky *, Timothy J. Wilson, and John F, Mandell Department of Chemical
More informationCARBON/EPOXY COMPOSITES FOR THE LAMBORGHINI MURCIELAGO
CARBON/EPOXY COMPOSITES FOR THE LAMBORGHINI MURCIELAGO Attilio Masini Automobili Lamborghini S.p.A Paolo Feraboli University of California, Santa Barbara Abstract Development of the carbon/epoxy body panels
More informationFAA Composites Safety Activities Overview
FAA Composites Safety Activities Overview By: Curtis Davies Program Manager Advanced Materials and Structural Safety and Joint FAA Advanced Materials and Structures Center of Excellence Date: FAA Approach
More informationFILM ADHESIVES NOMINAL CURE TEMP F (C ) / TIME. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 260 (126) / 20 min Cream
FILM ADHESIVES LC-E220 LC-E221 LC-E221ET LC-E221FR LC-E221QC LC-E222 LC-E23 LC-E224 LC-E225 Elevated Tg vs. LC-E221 Additional vs LC-E221 with Accelerated Cure Cycle vs LC-E221 Optically Clear, Low Temp
More informationTHE EFFECTS OF FIBER ARCHITECTURE AND THICKNESS ON THE PERMEABILITY OF CARBON FIBER PREFORMS
16 TH INTERNATIONAL CONFERENCE ON COMPOITE MATERIAL THE EFFECT OF FIBER ARCHITECTURE AND THICKNE ON THE PERMEABILITY OF CARBON FIBER PREFORM Brian W. Grimsley*, Roberto J. Cano*, Alfred C. Loos** * NAA
More informationNCAMP Standard Operating Procedures (SOP)
Date: March 27, 2017 NCAMP Standard Operating Procedures (SOP) Document Number: NSP 100 Revision: G Date: March 27, 2017 Prepared by: Yeow Ng and John Tomblin Reviewed by: Mark Freisthler Page 1 of 23
More informationSTRUCTURAL RESPONSE OF AEROSPACE-GRADE THIN-PLY WOVEN AND NON-CRIMP FABRICS
21 st International Conference on Composite Materials Xi an, 20-25 th August 2017 STRUCTURAL RESPONSE OF AEROSPACE-GRADE THIN-PLY WOVEN AND NON-CRIMP FABRICS Albertino Arteiro 1, Giuseppe Catalanotti 2,
More informationA STUDY OF THE COEFFICIENT OF FRICTION AND WEAR OF UNIDIRECTIONAL AND WOVENCARBON FIBER/EPOXY COMPOSITE IN SEVERE ABRASIVE CONDITIONS
10th International Conference on Composite Science and Technology ICCST/10 IDMEC 2015 A STUDY OF THE COEFFICIENT OF FRICTION AND WEAR OF UNIDIRECTIONAL AND WOVENCARBON FIBER/EPOXY COMPOSITE IN SEVERE ABRASIVE
More informationNovel Test Setup for Determination of High Temperature Mechanical Properties of Composites
Novel Test Setup for Determination of High Temperature Mechanical Properties of Composites 6th International Conference on Composites Testing and Model Identification Aalborg, 23.04.13 A. Chripunow 1,
More informationTHE DEVELOPMENT OF THE DYNAMIC MECHANICAL ANALYZER (DMA) CALIBRATON AND TESTING PROCEDURES. A Thesis by. Matthew S. Opliger
THE DEVELOPMENT OF THE DYNAMIC MECHANICAL ANALYZER (DMA) CALIBRATON AND TESTING PROCEDURES A Thesis by Matthew S. Opliger Bachelor of Science, Wichita State University, 2007 Submitted to the Department
More informationDevelopment of a Novel Compact Tension Specimen for Fibre Hybrid Composites
Development of a Novel Compact Tension Specimen for Fibre Hybrid Composites Tomas Katafiasz: 3 rd Year PhD Candidate 6 th April 2017, CompTest2017, KU Leuven L. Iannucci, E. Greenhalgh 1 Industrial Partners
More informationC A R B O N F I B E R
CARBON FIBER 101 What is this stuff anyway? Carbon fiber is a high strength, high stiffness, low weight synthetic fiber that can be used in a wide variety of aesthetic and structural applications. Carbon
More informationDesign of a High-g Unmanned Aerial Vehicle Structure
Design of a High-g Unmanned Aerial Vehicle Structure Seth S. Kessler, S. Mark Spearing and Greg A. Kirkos TECHNOLOGY LABORATORY FOR ADVANCED COMPOSITES Department of Aeronautics and Astronautics Massachusetts
More informationMECHANICAL PROPERTIES OF TRIAXIAL BRAIDED CARBON/EPOXY COMPOSITES
MECHANICAL PROPERTIES OF TRIAXIAL BRAIDED CARBON/EPOXY COMPOSITES C. L. Bowman 1, G. D. Roberts 1, M. S. Braley 2, M. Xie 3 & M. J. Booker 4 1 NASA Glenn Research Center, Cleveland OH 44135 2 A&P Technology,
More informationTECHNICAL DATA NEAT RESIN MECHANICAL PROPERTIES
TYPICAL APPLICATIONS Marine Structures Dielectric Structures Aerospace Structures PRODUCT FORMS Unitape to 24 Inches Wide Fabric Prepreg to 50 Inches Wide TYPICAL CURE PARAMETERS (If Aerospace applications
More informationComposites Processing
Composites Processing Fabrication Methods Wet Layup Prepreg Layup Filament Winding Fiber placement/fiber steering RTM/VaRTM Press Molding Pultrusion Wet Layup Fabric plies are wetted out and then placed
More informationRELEASE FABRICS. A-8888 Nylon peel ply fabric with an inert, heat stabilized, fully cross-linked, polymer finish Weight: 2.2 oz.
RELEASE FABRICS A-8888 Nylon peel ply fabric with an inert, heat stabilized, fully cross-linked, polymer finish Weight: 2.2 oz./yd 2 B-4444 Nylon peel ply fabric with an inert, heat stabilized, fully cross-linked,
More informationMTM49 series of prepregs is based on C ( F) curing toughened epoxy matrix resins designed for the manufacture of components.
ACG MTM 49 SERIES COMPONENT PREPREGS Product Description MTM49 series of prepregs is based on 80-160 C (176-320 F) curing toughened epoxy matrix resins designed for the manufacture of components. The series
More informationCOMPOSITES MATERIALS FOR AVIATION INDUSTRY
HENRI COANDA AIR FORCE ACADEMY ROMANIA INTERNATIONAL CONFERENCE of SCIENTIFIC PAPER AFASES 2012 Brasov, 24-26 May 2012 GENERAL M.R. STEFANIK ARMED FORCES ACADEMY SLOVAK REPUBLIC COMPOSITES MATERIALS FOR
More informationHexForce and HexPly Aerospace Selector Guide
HexForce and HexPly Aerospace Selector Guide European version About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of
More informationStructural composites in industrial applications: future solutions for today's engineering challenges in design and simulation
Structural composites in industrial applications: future solutions for today's engineering challenges in design and simulation Prof. dr. ir. Wim VAN PAEPEGEM Mechanics of Materials and Structures (MMS)
More informationIMPACT RESISTANCE AND TOLERANCE OF INTERLEAVED RTM LAMINATES
IMPACT RESISTANCE AND TOLERANCE OF INTERLEAVED RTM LAMINATES Andre Duarte 1, Israel Herszberg 2 and Rowan Paton 3 1 Sir Lawrence Wackett Centre for Aerospace Design Technology, Royal Melbourne Institute
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NATIONAL INSTITUTE FOR AVIATION RESEARCH (NIAR) at WICHITA STATE UNIVERSITY National Institute for Aviation Research Building 1845 Fairmount
More informationLOCAL DAMAGE IN A 5 HARNESS SATIN WEAVE COMPOSITE UNDER STATIC TENSION: PART I - EXPERIMENTAL ANALYSIS
1 LOCAL DAMAGE IN A 5 HARNESS SATIN WEAVE COMPOSITE UNDER STATIC TENSION: PART I - EXPERIMENTAL ANALYSIS S. Daggumati a*, I. De Baere a, W. Van Paepegem a, J. Degrieck a, J. Xu b, S.V. Lomov b, I. Verpoest
More informationVacuum Bag Only Processing of Complex Shapes: Effect of Corner Angle, Material Properties and Processing Conditions
Vacuum Bag Only Processing of Complex Shapes: Effect of Corner Angle, Material Properties and Processing Conditions Y. MA, T. CENTEA, G. NILAKANTAN and S. NUTT ABSTRACT Out-of-autoclave prepregs can easily
More informationCOMPOSITE LANDING GEAR COMPONENTS FOR AEROSPACE APPLICATIONS
24 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES COMPOSITE LANDING GEAR COMPONENTS FOR AEROSPACE APPLICATIONS H.G.S.J. Thuis National Aerospace Laboratory NLR Keywords: Composites, Resin Transfer
More informationNumerical and experimental investigation of bolted joints
MultiCraft International Journal of Engineering, Science and Technology Vol. 3, No. 8, 2011, pp. 285-296 INTERNATIONAL JOURNAL OF ENGINEERING, SCIENCE AND TECHNOLOGY www.ijest-ng.com 2011 MultiCraft Limited.
More informationAE MONITORING OF LIGHTNING-DAMAGED CFRP LAMINATES DURING COMPRESSION-AFTER-IMPACT TEST
AE MONITORING OF LIGHTNING-DAMAGED CFRP LAMINATES DURING COMPRESSION-AFTER-IMPACT TEST Abstract JAE-HA SHIN and OH-YANG KWON Department of Mechanical Engineering, Inha University, Incheon 402-751, Korea
More informationTooling Prepreg Processing Guide
Tooling Prepreg Processing Guide TABLE OF CONTENTS Introduction to Composite Tooling 4 Step-by-Step Processing Information 1. Master Pattern 5 2. Preparation of Materials 6 3. Lamination to Tool 6 4. Debulking
More informationVACUUM INFUSION AND CURING OF CARBON FIBER/BENZOXAZINE COMPOSITES FOR HIGH TEMPERATURE APPLICATIONS
VACUUM INFUSION AND CURING OF CARBON FIBER/BENZOXAZINE COMPOSITES FOR HIGH TEMPERATURE APPLICATIONS Amol Ogale 1, David Leach 2, Ehsan Barjasteh 2, Helder Barros-Abreu3, Dale Brosius 4, Jens Schlimbach
More informationTenCate Materials for the Consumer Footwear and Orthotics Markets
TENCATE PERFORMANCE COMPOSITES TenCate Materials for the Consumer Footwear and Orthotics Markets Footwear Orthotics Skates Sports Gear Orthopedics TenCate CFRT Thermoplastic Composites TENCATE PERFORMANCE
More informationDesign, Testing, Analysis, and Material Properties of Carbon Fiber Reinforced Polymers
Rose-Hulman Institute of Technology Rose-Hulman Scholar Rose-Hulman Undergraduate Research Publications 5-30-2016 Design, Testing, Analysis, and Material Properties of Carbon Fiber Reinforced Polymers
More informationCOMPRESSION STRENGTH OF CARBON FIBER LAMINATES CONTAINING FLAWS WITH FIBER WAVINESS
COMPRESSION STRENGTH OF CARBON FIBER LAMINATES CONTAINING FLAWS WITH FIBER WAVINESS Darrell P. Avery, Daniel D. Samborsky John F. Mandell, and Douglas S. Cairns Montana State University Bozeman, Montana,
More informationMULTI-PHYSICS NANO-ENGINEERED STRUCTURAL DAMAGE DETECTION AND DE-ICING
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS 1 General Introduction Catastrophic structural failures are the cause of many physical and personal losses, at a worldwide cost estimated at billions
More informationADVANCED COMPOSITES. Selector guide AIRCRAFT INTERIORS
ADVANCED COMPOSITES Selector guide AIRCRAFT INTERIORS Introduction SHAPING THE FUTURE OF COMMERCIAL AND CORPORATE AIRCRAFT INTERIOR COMPOSITES TenCate Advanced Composites offers market leading fire-retardant
More informationINTEGRATED FINITE ELEMENT ENVIRONMENT FOR COMPOSITE PROCESS SIMULATION
INTEGRATED FINITE ELEMENT ENVIRONMENT FOR COMPOSITE PROCESS SIMULATION Tomasz Garstka, Garry Cole, David Irving, Paul Lyons Finite Element Analysis Limited, Forge House, 66 High Street, Kingston upon Thames,
More informationMaterials and Qualification Procedures for Ships
Materials and Qualification Procedures for Ships Approval of Fibre Reinforcements Revision 1, December 2013 Material and Qualification Procedures for Ships Lloyd s Register Group Limited, its subsidiaries
More informationPIP INSR1000 Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service
TECHNICAL REVISION August 2015 Insulation PIP INSR1000 Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
More informationBrendan J. O Toole, Ph.D. Department of Mechanical Engineering Howard R. Hughes College of Engineering University of Nevada Las Vegas
MEG 495/695 Special Topics: Entertainment Engineering Introduction to Composite Materials Brendan J. O Toole, Ph.D. Department of Mechanical Engineering Howard R. Hughes College of Engineering University
More informationCold-curing epoxy system based on Araldite LY 564 / Hardener HY 560
Ciba Specialty Chemicals Performance Polymers Structural Composites MATRIX SYSTEMS FOR AEROSPACE COMPOSITES MATRIX SYSTEMS FOR INDUSTRIAL COMPOSITES DATA SHEET Cold-curing epoxy system based on Araldite
More informationElectron Beam Curing Demonstration with Automobile Structures. Abstract. Introduction
Electron Beam Curing Demonstration with Automobile Structures C. C. Eberle 1, C. J. Janke 1, and C. S. Wang 2 Oak Ridge National Laboratory 1 and General Motors Corporation 2 Abstract Continuous carbon
More informationPRODUCT DATA SHEET TYPICAL NEAT RESIN PROPERTIES. Dielectric Constant at 10 Ghz on 4581 quartz Loss Tangent at 10 Ghz on 4581 quartz...0.
PRODUCT TYPE 250 F (121 C) Cure Epoxy TYPICAL APPLICATIONS Secondary Aircraft Structures Radomes with Spectra, Glass, Quartz & Kevlar Reflectors Sporting Goods Knee Braces and Other Related Medical Items
More informationInvestigation of electrical and impact properties of carbon fiber textile composites
University of Iowa Iowa Research Online Theses and Dissertations Spring 2014 Investigation of electrical and impact properties of carbon fiber textile composites Bryne Berry University of Iowa Copyright
More informationA Study on Cotton-Ramie Fabric Reinforced Composites
International Journal of Materials Science ISSN 0973-4589 Volume 12, Number 1 (2017), pp. 117-125 Research India Publications http://www.ripublication.com A Study on Cotton-Ramie Fabric Reinforced Composites
More information