PROFILE OF Dr TILAK RAJ. Officiating Registrar of YMCA University of Science and Technology.

Transcription

1 PROFILE OF Dr TILAK RAJ Officiating Registrar of YMCA University of Science and Technology NAME IN FULL : Tilak Raj DATE OF BIRTH : tilakraj64@rediffmail.com, tilakraj64@gmail.com, EDUCATIONAL QUALIFICATIONS: Degree B.SC. (Engg.) Branch/Specialization Rank/class %age of marks Mechanical Engineering First class with Honours M.E. Production Engg. First class with Distinction PhD Mechanical Engineering (Study of Barriers and Enablers in Implementation of Flexible Manufacturing System) University/College Year REC Kurukshetra (Now NIT Kurukshetra) 78.5 Delhi College of Engg. (Now DTU, Delhi) N/A N/A Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi Industrial Experience: 1. Worked as Trainee Engineer in CNC department at Printrers House Pvt Ltd., Ballabhgarh (a unit of manufacturing printing machinery) from April,1988 to April, Worked as CNC Engineer at Printrers House Pvt Ltd., Ballabhgarh (a unit of manufacturing printing machinery) from May, 1989 to August, Worked as CNC Engineer at PYN Precision Components, Faridabad from December, 1989 to September, 1991 Teaching Experience: Working in the Department of Mechanical Engineering of YMCA University of Science and Technology (erstwhile YMCA Institute of Engineering), Faridabad since September, 1991 to February, 2009 as Lecturer, Assistant Professor and Associate Professor and February 2009 to till date as Professor Research Experience: Ph.D. s Awarded

2 Ph.D. Submitted (Notification waited) 07 (seven) scholars are currently working for Ph.D.s Areas of Research: Flexible Manufacturing Systems, EDM, Sustainable manufacturing and supply chain management Publications: 47 Papers in various International Journals 10 Papers in various National and International Conferences Patent: 01 (Applied in Indian Patent House in January 17, 2014) Editorial Board Member: YMCAUST International Journal of Research Reviewer of European Journal of Operational Research ( EJOR) Authored a book on CNC Technology and Programming Conferences organized: National Conference on Science in Media during December 3-4, 2012 Science Conclave organized: Science Conclave sponsored by DST Haryana during March 5-6, 2013 Participation in conferences: Presented a paper in JMI in 2005 Presented a paper in International Conference in December, 2008 Presented two papers in Global conference in November 15-17, 2007 Chaired a session at National Conference on TAME organized by YMCA in 2006 Chaired a session at National Conference on TAME organized by YMCA in 2012 Invited Talks: Delivered an invited talk on CNC Technology and Programming in AICTE sponsored FDP at JMI, New Delhi in March, 2015 Delivered an invited talk on CNC Machining in FDP on Automation in Manufacturing (AIM-2015) a TEQIP-II sponsored programme during May 2015 at DTU, New Delhi Consultancy: Provided consultancy to LML, Kanpur in improving their productivity through cutting tool designs Administrative Experience along with Regular Teaching Load: 2

3 Controller of Examination : March 2008 to July, 2014 Dean of Humanity and Science : February 2011 to February 2014 Faculty Chairman of Humanity and Science : February 2011 to February 2014 Department UGC coordinator for NET Examination : June 2013, Dec., 2013 and June, 2014 Registrar of YMCA University : 3oth March 2015 to till date of Science and Technology, Faridabad Membership of Governing Bodies of the University: Member of Academic Council from to Member of Executive Council from to Member of Establishment Committee from to Member of Planning Board from to Special Achievement: Biography Published by MORQUIES in 2010 Publications: (To be modified soon) (A) Publications in Journals: 1. N Sharma, T Raj, KK Jangra, Parameter optimization and experimental study on wire electrical discharge machining of porous Ni40Ti60 alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of V Jain, T Raj, A hybrid approach using ISM and modified TOPSIS for the evaluation of flexibility in FMS, International Journal of Industrial and Systems Engineering 19 (3), N Sharma, T Raj, KK Jangra, Micro Structural Evaluation of NitiPowder,Steatite and Steel Balls after Different Milling Conditions, Materials and Manufacturing Processes, N Sharma, T Raj, KK Jangra, Applications of Nickel Titanium Alloy, Journal of Engineering and Technology 5 (1), SK Patra, T Raj and BB Arora, Sustainability issues in energy efficient manufacturing systems- A Review, International Journal of Engineering and Manufacturing Science, 5(1), 1-8, V Jain, T Raj, Modeling and analysis of FMS flexibility factors by TISM and fuzzy MICMAC, International Journal of System Assurance Engineering and Management 6 ( M Chand, T Raj, R Shankar, Weighted ISM technique for analysing the competitiveness of uncertainty and risk measures in supply chain, International Journal of Logistics Systems and Management 21 (2), M Chand, T Raj, R Shankar, Risk mitigations strategy in supply chain planning and control: an ANP approach, International Journal of Productivity and Quality Management 16 (1),

4 9. V Jain, T Raj, Evaluating the intensity of variables affecting flexibility in FMS by graph theory and matrix approach, International Journal of Industrial and Systems Engineering 19 (2), M Chand, T Raj, R Shankar, Analysing the operational risks in supply chain by using weighted interpretive structure modelling technique, International Journal of Services and Operations Management 18 (4), V Jain, T Raj, Modelling and analysis of FMS productivity variables by ISM, SEM and GTMA approach, Frontiers of Mechanical Engineering 9 (3), S Kumar, T Raj, Modelling the social implications of flexible manufacturing system through ISM: a case of India, International Journal of Modelling in Operations Management 4 (12), Chand, M., Raj, T., and Shankar, R, A comparative study of multi criteria decision making approaches for risks assessment in supply chain, International Journal of Business Information Systems 18 (1), M Chand, T Raj, R Shankar, A comparative study of multi criteria decision making approaches for risks assessment in supply chain, International Journal of Business Information Systems 18 (1), V Jain, T Raj, Evaluation of flexibility in FMS by VIKOR methodology, International Journal of Industrial and Systems Engineering 18 (4), N Sharma, T Raj, K Jangra, Morphological Characteristics Measurement of Nickel Titanium Alloy by Scanning Electron Microscopy, IUP Journal of Mechanical Engineering 6 (4), B Nagar, T Raj, Digraph and matrix evaluation for shifting to humanised flexible manufacturing system, International Journal of Logistics Economics and Globalisation 5 (2), B Nagar, T Raj, FINITE ELEMENT ANALYSIS FOR OPTIMIZATION OF THE SHEET METAL BLANK MANUFACTURED BY DIE FORMING PROCESS, Journal of Machining and Forming Technologies 5 (1/2), V Jain, T Raj, Ranking of flexibility in flexible manufacturing system by using a combined multiple attribute decision making method, Global Journal of Flexible Systems Management 14 (3), V Jain, T Raj, valuating the variables affecting flexibility in FMS by exploratory and confirmatory factor analysis, Global Journal of Flexible Systems Management 14 (4), B Nagar, T Raj, An analytical case study of an advanced manufacturing system for evaluating the impact of human enablers in its performance, Journal of Advances in Management Research 10 (1), M Chand, T Raj, R Shankar, Analytical network process (ANP) based modeling for analysing the risks in traditional, agile, and lean supply chain, Proceeding on Advanced Data Analysis, Business Analytics and Intelligence B Nagar, T Raj, R Shankar, Analysis of interactions of criteria for mitigating negative social impacts of next generation manufacturing systems, International Journal of Logistics Systems and Management 16 (3), V Jain, T Raj, Evaluation of flexibility in FMS using SAW and WPM, Decision Science Letters 2 (4),

5 25. V Malhotra, T Raj, A Arora, Evaluation of barriers affecting reconfigurable manufacturing systems with graph theory and matrix approach, Materials and Manufacturing Processes 27 (1), B Nagar, T Raj, An AHP based approach for the selection of HFMS: an Indian perspective, International Journal of Operational Research 13 (3), B Nagar, T Raj, Analysis of critical success factors for implementation of humanised flexible manufacturing system in industries, International Journal of Logistics Economics and Globalisation 4 (4), B Nagar, T Raj, Risk mitigation in the implementation of AMTs: a guiding framework for future. International Journal of Industrial Engineering Computations 3 (3), V Malhotra, T Raj, Quantifying the factors affecting the reconfigurable manufacturing system, International Journal of Services and Operations Management 13 (2), T Raj, R Attri, Modelling the factors affecting flexibility in FMS, International Journal of Industrial and Systems Engineering 11 (4), T. Raj, R. Attri, & V. Jain, Modelling the factors affecting flexibility in FMS. International Journal of Industrial and Systems Engineering, 11 (4), , T Raj, R Attri, Identification and modelling of barriers in the implementation of TQM, International Journal of Productivity and Quality Management 8 (2), Mudgal, R. K., Shankar, R., Talib, P., & T Raj, Modelling the barriers of green supply chain practices: an Indian perspective International Journal of Logistics Systems and Management 7 (1), T Raj, R Attri, Quantifying barriers to implementing total quality management (TQM), European Journal of Industrial Engineering 4 (3), V Malhotra, T Raj, A Arora, Excellent techniques of manufacturing systems: RMS and FMS, International Journal of Engineering Science and Technology, 2 (3), , T Raj, R Shankar, M Suhaib, RA Khan, A graph-theoretic approach to evaluate the intensity of barriers in the implementation of FMSs, International Journal of Services and Operations Management 7 (1), T Raj, R Shankar, M Suhaib, RA Khan, GTA based framework for evaluating the feasibility of transition to FMS, Journal of Manufacturing Technology Management, 21 (2), V Malhotra, T Raj, A Arora, Importance of Computer Aided Process Planning Approach in Reconfigurable Manufacturing System, International Journal of Applied Engineering Research 5 (9) T Raj, R Shankar, M Suhaib, An ISM approach to analyse interaction between barriers of transition to Flexible Manufacturing System, International Journal of Manufacturing Technology and Management 16 (4), Mudgal, R. K., Shankar, R., Talib, P., & T Raj, Greening the supply chain practices: an Indian perspective of enablers' relationships., 1(23), International Journal of Advanced Operations Management 1 (23),

6 41. V Malhotra, T Raj, A Arora, Reconfigurable manufacturing system: an overview, International Journal of Machine Intelligence 1 (2) T Raj, R Shankar, M Suhaib, An ISM approach for modelling the enablers of flexible manufacturing system: the case for India, International Journal of Production Research 46 (24), T Raj, R Shankar, M Suhaib, S Garg, Y Singh, An AHP approach for the selection of Advanced Manufacturing System: a case study, International Journal of Manufacturing Research 3 (4), T Raj, R Shankar, M Suhaib, A review of some issues and identification of some barriers in the implementation of FMS, International Journal of Flexible manufacturing Systems 19 (1), M Chand, T Raj, R Shankar, An Approach towards Risk Mitigations in Supply Chain by using ANP MOORA Method, RESEARCH AND SUSTAINABLE BUSINESS, KK Jangra, T Raj, N Sharma, Fabrication and Development of Die for Powder Compaction in Press 47. SK Patra, T Raj, CONSUMPTION AND MANUFACTURING FOR THE FUTURE CHALLENGES THE SUSTAINABLE WAY 48. T Raj, M Suhaib, RA Khan, R Shankar, STUDY OF BARRIERS AND ENABLERS IN IMPLEMENTATION OF FLEXIBLE MANUFACTURING SYSTEM, (B) Book Chapters: 1. V Malhotra, T Raj, A Kumar, RMS: A New Linkage with Pervasive Computing, Pervasive computing for business : trends and applications, Chapter 5, 2010 ( C) Publications in International/Global Conferences: 1.Tilak Raj, Mohammed Suhaib and Ravi Shankar, It is the Time to Change!, proceedings of International Conference on Advances in Mechanical Engineering held at BBSBEC, Fatehgarh Sahib, Punjab, India from December 1-3, Tilak Raj, Ravi Shankar, Mohammed Suhaib and R.A. Khan, HFMS: A New Concept in Context of Flexible Manufacturing Systems, proceedings of Global Conference on Flexible System Management held at UP Technical University, Noida, India from November 15-17, Tilak Raj, Ravi Shankar, Mohammed Suhaib and R.A. Khan, Some dimensions of Flexibility in FMS, proceedings of Global Conference on Flexible System Management held in UP Technical University, Noida, India from November 15-17, Vasdev Malhotra, Tilak Raj and Ashok.Arora, An Excellent Role of Reconfigurable Supply Network (RSN) in Reconfigurable Manufacturing System, Proc. of the 3rd International Conference on advances in Mechanical Engineering, Jan at S.V.National Institute of Technology, Surat , Gujarat, India 6

7 5. Vasdev Malhotra, Tilak Raj and Ashok.Arora, THE STUDY OF RECONFIGURABLE PROCESS PLANS AND BENEFITS FOR RECONFIGURABLE MANUFACTURING SYSTEMS, Proc. of the international conference on Advances in Mechanical Engineering, December 15-17, 2008 at S.V. National Institute of Technology, Surat , Gujrat, India (D) Publications in National Conferences: 1. Vasdev Malhotra, Tilak Raj and Ashok.Arora, Identification of factors affecting the Selection of Reconfigurable Manufacturing System Layout, Proceedings of NCAMT S Handa, T Raj, S Grover, Quest for environmental protection by integrated green manufacturing system, Trends and Advances in Mechanical Engineering (TAME12),organized by YMCA