ACE Group. Three Used Soft Drinks Bottling Plants

Transcription

1 Three Used Soft Drinks Bottling Plants Blow Moulding, Filling and Palletising Line 3:- Blow Moulders (Qty 2) Model SBO14 with Sidel preform hoppers and preform infeed conveyors. Preform size 21.5 g Neck Finish. Allen Bradley Panelview 600 controls and Gantry for infeeds included. Pressco bottle inspection system and moulds are excluded. These moulders are currently configured for 35mm bottles so client will be exchanging the necessary change parts. Airveyors:- Airveyor transporting bottles to labellers. Some airveyor will also be retained and the airveyor lowerators are being retained. Labeller Model Roll Quattro F35 Type 27T-SR-HH3-S1-E1 with Lauer 'PCS CNC control and Nordson 'Versablue adhesive gluing unit (2007). 250ml - 2l bottle capacity but currently set for 500mm Oasis bottle. Bottles prepressurised prior to labelling with sterile air prefiltered through Donaldsons 'Ultrafilter'. Label Detector:- Model (basic) Air Conveyors:- With Allen Bradley 'Panel Vision 1000' control unit. 1

2 Rinse/Filling Capper Machine:- Model Bluestar 2000 With Sasib 70 head rinser, Sasib 90 head filler with CO2 and Nitrogen dosing facility, Arol Euro PK 15 head capper, 113mm filler pitch. 34,000 bottles/hour capacity. 500mm mm bottle sizes. Carbonator:- With Carbo 2000 CO2 analyser, 1350l capacity tank Reject Lane:- Divider:-Model BMCA 196/6 With GF control. 6 lane Overwrapper:- Model SK450T No tray inserts facility. Heat Tunnel:-Model ST3000 Conveyorised. Conveyor:- 180 Degree bend. Conveyor:- Size adjustable, automated. Pack Turning Unit:- Conveyor to Palletiser:- Palletiser:- Model PAL KOMBI-1P11 With pallet infeed, layer pad inserter and transfer conveyor. 2

3 Pallet Wrapper:-Model Helix V. Take Off Conveyor:- 3

4 4

5 5

6 6

7 7

8 8

9 9

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23

24 24

25 25

26 26

27 27

28 28

29 29

30 30

31 31

32 32

33 33

34 34

35 Blow Moulding, Filling and Palletising Line 4 :- Line comprises of all machinery from production of bottles to palletising. Please note that lines exclude certain labellers and equipment that the client is retaining and may be seen in the visual formats. The line is being offered as a whole only.it is anticipated that this line will be available June but this date is subject to change. Blow Moulder:- Model SBO24 with 24 moulds and 24 mould oven. Set up to handle 43g PCO thread preform. Preforms fed from Anduz hopper with inclined conveyor and feed conveyor to blower. Airveyor:- Transports blown bottles to rinse stage. Cap Feeder:- with infeed unit and outfeed conveyors to capper. Rinser:- Filler Capper:- Model VVF96/14 SV 96 head filler and 14 head capper. Carbonator:-Model C35 With 1380 litre tank and ABB 'Commmando 1900' control. Inline Fill Height and Cap Detector:-Model Spectrum HBBHACCF In line with reject section. 35

36 Slatted Conveyor:- Various widths, feeding the labeler. Labeller:-Model 920a with Nordson 'Duralube 10' gluing unit. Labeller has ability to handle 1.25, 1.5l and 2.0 straight bottles. Label Detector: - Model (Basic) Inkjet Coder:- Model DDC3 With DPX1000 unit. Slatted Conveyor:- To overwrapped. 4 Lane Overwrapper:- Model 140/60 With tray errection facility. Machine has initial collation, separation, tray insertion section then final overwrap section. Nordson gluing unit. Heat Tunnel:- Model ST11/6000 With Siemens Simatic touch control. Slatted Conveyor:- To handle attacher. Handle Attacher:- Model S-69 Conveyors to Palletising Area:- Various lengths of conveyor. 36

37 Bottle Alignment Unit (Four Bottle):- Unit handles four packs and straightens/raises four packs from horizontal to vertical. Palletiser:- Model 820 With pallet lowering facility. Wrapper:- Model Series 200 Batching Plant to Line:- Comprising of Diessel ' DIMA-C' batch mixing system and two 14,000 litre stainless steel vertical mixing vessels with jet mixing from beneath. 37

38 38

39 39

40 40

41 41

42 42

43 43

44 44

45 45

46 46

47 47

48 48

49 49

50 50

51 51

52 52

53 53

54 54

55 55

56 56

57 57

58 58

59 59

60 60

61 61

62 62

63 63

64 64

65 Blow Moulding, Filling and Palletising Line 10:- Line comprises of all machinery from production of bottles to palletising. Please note that lines exclude certain labellers and equipment that the client is retaining and may be seen in the visual formats. The line is being offered as a whole only. It is anticipated that this line will be available June. Blow Moulder:- With 24 moulds and 24 mould oven. Set up to handle 43g PCO thread preform. Performs fed from Anduz hopper with inclined conveyor and feed conveyor to blower. Airveyor:- Transports blown bottles to rinse stage. Cap Feeder:- With infeed unit and outfeed conveyors to capper. Rinser:- Filler Capper:- Model VVF96/14 SV 96 head filler and 14 head capper. Carbonator:- Model C35 With 1380 litre tank and ABB 'Commmando 1900' control. Slatted Conveyor:- Various widths, feeding the labeler. Labeller:- with Nordson 'Duralube 10' gluing unit. Labeller has ability to handle 2.0 straight bottles. Label Detector: - Model (Basic) 65

66 Inkjet Coder:- Model DDC3 With DPX1000 unit. Slatted Conveyor:- To overwrapper. 4 Lane Overwrapper:- Model 140/60 Machine has initial collation, separation and final overwrap section with Nordson gluing unit. Heat Tunnel:- Model ST11/6006 With Siemens Simatic touch control. Conveyors to Palletising Area:- Various lengths of conveyor. Bottle Alignment Unit:- Palletiser:- Model 820 With pallet lowering facility. Wrapper:- Model Series 200 Batching Plant to Line:- Comprising of Diessel ' DIMA-C' batch mixing system and two 14,000 litre stainless steel vertical mixing vessels with jet mixing from beneath. 66

67 67

68 68

69 69

70 70

71 71

72 72

73 73

74 74

75 75

76 76

77 77

78 78

79 79

80 80

81 81

82 82

83 83

84 84

85 85

86 86

87 87

88 88

89 89

90 90

91 91

92 92

93 93

94 94