GARKANE ENERGY COOPERATIVE SMALL GENERATOR QUALIFIED FACILITY INTERCONNECTION APPLICATION

Transcription

1 Designated Contact Person: Mike Avant, Engineering Manager Address (for U.S. Mail Deliveries): Garkane Energy 1802 S Highway 89A Kanab, UT Telephone Number: (435) Address: mike.avant@garkane.com An Interconnection Request is considered complete when it provides all applicable and correct information required below. Preamble and Instructions An Interconnection Customer who requests a Qualified Facility interconnection must submit this Interconnection Request by hand delivery, mail, , or fax to the Cooperative. Processing Fee or Deposit: If the Interconnection Request is submitted to be evaluated under a Fast Track Process, the nonrefundable processing fee is $250. If the Interconnection Request is submitted under the Study Process, whether a new submission or an Interconnection Request that did not pass the Fast Track Process, the Interconnection Customer shall submit to the Cooperative a deposit of $1,000.

2 Interconnection Customer Information Legal Name of the Interconnection Customer (or, if an individual, individual's name) Name: Contact Person: Mailing Address: City: State: Zip: Facility Location (if different from above): Telephone (Day): Fax: Telephone (Evening): Address: Alternative Contact Information (if different from the Interconnection Customer) Contact Name: Title: Address: Telephone (Day): Fax: Application is for: Telephone (Evening): Address: New Small Generating Qualified Facility Capacity addition to Existing Small Generating Facility If capacity addition to existing facility, please describe: Will the Small Generating Facility be used for any of the following? To Supply Power to the Interconnection Customer? Yes To Supply Power to Others? Yes No No

3 For installations at locations with existing electric service to which the proposed Small Generating Facility will interconnect, provide: (Local Electric Service Provider*) (Existing Account Number*) [*To be provided by the Interconnection Customer if the local electric service provider is different from the Cooperative] Contact Name: Title: Address: Telephone (Day): Fax: Telephone (Evening): Address: Requested Point of Interconnection: Interconnection Customer's Requested In-Service Date: Small Generating Facility Information Data apply only to the Small Generating Qualified Facility, not the Interconnection Facilities. Energy Source: Solar Wind Hydro Hydro Type (e.g. Run-of-River): Diesel Natural Gas Fuel Oil Other (state type) Prime Mover: Fuel Cell Recip Engine Gas Turb Steam Turb Microturbine PV Other Type of Generator: Synchronous Induction Inverter Generator Nameplate Rating: kw (Typical) Generator Nameplate kvar: Expected Interconnection Customer or Customer-Site Load: kw (if none, so state) Typical Reactive Load (if known): Maximum Nameplate Capability Requested: kw

4 List components of the Small Generating Facility equipment package that are currently certified: Equipment Type Certifying Entity Is the prime mover compatible with the certified protective relay package? Yes No Generator (or solar inverter) Manufacturer, Model Name & Number: Version Number: Nameplate Output Power Rating in kw: (Summer) Nameplate Output Power Rating in kva: (Summer) (Winter) (Winter) Individual Generator Power Factor Rated Power Factor: Leading: Lagging: Total Number of Generators in wind farm to be interconnected pursuant to this Interconnection Request: Elevation: Single phase Three phase Inverter Manufacturer, Model Name & Number (if used): List of adjustable set points for the protective equipment or software: Note: A completed Power System Simulator for Engineering (PSS/E) data sheet must be supplied with the Interconnection Request. Small Generating Facility Characteristic Data (for inverter-based machines) Max design fault contribution current: Instantaneous or RMS? Harmonics Characteristics: Start-up requirements:

5 Small Generating Facility Characteristic Data (for rotating machines) RPM Frequency: (*) Neutral Grounding Resistor (If Applicable): Synchronous Generators: Direct Axis Synchronous Reactance, Xd: P.U. Direct Axis Transient Reactance, X' d: P.U. Direct Axis Subtransient Reactance, X" d: Negative Sequence Reactance, X2: P.U. Zero Sequence Reactance, X0: P.U. KVA Base: Field Volts: Field Amperes: P.U. Induction Generators: Motoring Power (kw): I2 2 t or K (Heating Time Constant): Rotor Resistance, Rr: Stator Resistance, Rs: Stator Reactance, Xs: Rotor Reactance, Xr: Magnetizing Reactance, Xm: Short Circuit Reactance, Xd'': Exciting Current: Temperature Rise: Frame Size: Design Letter: Reactive Power Required In Vars (No Load): Reactive Power Required In Vars (Full Load): Total Rotating Inertia, H: Per Unit on kva Base Note: Please contact the Cooperative prior to submitting the Interconnection Request to determine if the specified information above is required. Excitation and Governor System Data for Synchronous Generators Only Provide appropriate IEEE model block diagram of excitation system, governor system and power system stabilizer (PSS) in accordance with the regional reliability council criteria. A PSS may be determined to be required by applicable studies. A copy of the manufacturer's block diagram may not be substituted.

6 Interconnection Facilities Information Will a transformer be used between the generator and the point of interconnection? Yes No Will the transformer be provided by the Interconnection Customer? Yes No Transformer Data (If Applicable, for Interconnection Customer-Owned Transformer): Is the transformer: single phase three phase? Size: kva Transformer Impedance: % on kva Base If Three Phase: Transformer Primary: Volts Delta Wye Wye Grounded Transformer Secondary: Volts Delta Wye Wye Grounded Transformer Tertiary: Volts Delta Wye Wye Grounded Transformer Fuse Data (If Applicable, for Interconnection Customer-Owned Fuse): (Attach copy of fuse manufacturer's Minimum Melt and Total Clearing Time-Current Curves) Size: Speed: Interconnecting Circuit Breaker (if applicable): Load Rating (Amps): Interrupting Rating (Amps): Trip Speed (Cycles): Interconnection Protective Relays (If Applicable): If Microprocessor-Controlled: List of Functions and Adjustable Setpoints for the protective equipment or software: Setpoint Function Minimum Maximum

7 6. If Discrete Components: (Enclose Copy of any Proposed Time-Overcurrent Coordination Curves) Style/Catalog No.: Proposed Setting: Style/Catalog No.: Proposed Setting: Style/Catalog No.: Proposed Setting: Style/Catalog No.: Proposed Setting: Style/Catalog No.: Proposed Setting: Current Transformer Data (If Applicable): (Enclose Copy of Manufacturer's Excitation and Ratio Correction Curves) Accuracy Class: Accuracy Class: Proposed Ratio Connection: Proposed Ratio Connection: Potential Transformer Data (If Applicable): Accuracy Class: Accuracy Class: Proposed Ratio Connection: Proposed Ratio Connection: General Information Enclose copy of site electrical one-line diagram showing the configuration of all Small Generating Facility equipment, current and potential circuits, and protection and control schemes. This one-line diagram must be signed and stamped by a licensed Professional Engineer if the Small Generating Facility is larger than 50 kw. Enclose copy of any acceptable site control documentation that indicates the precise physical location of the proposed Small Generating Facility (e.g., USGS topographic map or other diagram or documentation). This is additional to Transmission Provider required Site Control Documentation reasonably demonstrating:(1) ownership of, a leasehold interest in, or a right to develop a site for the purpose of constructing the Generating Facility; (2) an option to purchase or acquire a leasehold site for such purpose; or (3) an exclusivity or other business relationship between Interconnection Customer and the entity having the right to sell, lease or grant Interconnection Customer the right to possess or occupy a site for such purpose.

8 Proposed location of protective interface equipment on property (include address if different from the Interconnection Customer's address) Enclose copy of any site documentation that describes and details the operation of the protection and control schemes. Is Available Documentation Enclosed? Yes No Enclose copies of schematic drawings for all protection and control circuits, relay current circuits, relay potential circuits, and alarm/monitoring circuits (if applicable). Are Schematic Drawings Enclosed? Yes No Applicant Signature I hereby certify that, to the best of my knowledge, all the information provided in this Interconnection Request is true and correct. For Interconnection Customer: Date: