Equipment Information

Transcription

1 PLM Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air Ltd. Clifton House, 1 Marston Road St. Neots GB-Cambridgeshire PE19 2HN United Kingdom Telephone: Telefax: cryovac.ukmkt@sealedair.com Reg. U.S. Pat. & TM Off. Sealed Air Corporation All rights reserved. Printed in Switzerland The 9 Dot Logo and Sealed Air are registered trademarks of Sealed Air Corporation (US). No part of this manual may be reproduced or transmitted to any party without prior expressed written consent from Sealed Air Corporation.

2 1 Description and key features 1.1 Description PakFormance is an integration platform that enhances our total systems approach and uses information to provide value to our customers. The PakFormance offering is a unique combination of IS hardware, IS software, and equipment that delivers a network for data exchange. The offering has the ability to link Sealed Air s systems to each other and to third party equipment (scales, printers, labelers etc.). PakFormance is modular, flexible, scalable, configurable, supportable, and focused on packaging. Through this new solution, Sealed Air brings to market new functionalities that allow visualization of the packaging process, automatic in-line weighing, automatic in-line label printing, batch management, tracing through the packaging line, and permanent monitoring for process improvement, etc. Being a modular implementation, the level of features and functionalities will be driven by the line configuration and IS software implemented. Sealed Air s PakFormance delivers continuous visibility over packaging rooms, enables process flow automation, traceability, increases efficiency and significantly reduces operating costs. PakFormance provides the ability to measure, control, and improve both processes and costs. The Sealed Air PakFormance Product Labeling Module (PLM) is composed of an Markem-Imaje label printer and dispenser, enclosed in a stainless housing and mounted on wheels. The Markem-Imaje unit is PakFormance compliant and hence our preferred labeling solution. Other labeling solutions may be explored on specific customer request. The Product Labeling Module can be installed at any step of the packaging process. It is controlled by the packaging line supervisor and dispenses labels automatically to an operator who applies the label onto the either naked or already packed product. The printer can dynamically print any type of information, constant, variable, logo or bar code. The print layout can be fully customized per product type, as long as the products are traced. Construction is simple and robust. All critical parts are treated against the corrosive environment often found in food production and packaging rooms. Designed with ergonomics, safety and hygiene in mind it is easy to use and clean, simple to maintain and meets all relevant European legislation for safety and hygiene. 1.2 Key features Automatic label printing and dispensing One operator required for the label application on naked or packed product Suitable for product flow from right to left and left to right Thermal transfer or direct transfer printing technology Standard Markem-Imaje label creation software Speed depending on the operator (35 labels per minute achievable) Dynamic printing, customized per product if products are traced Enclosed in a stainless housing, mounted on wheels Hygienic design makes cleaning easy and effective 2

3 2 Layout Fig. 2-1, Layout 3

4 3 Nominal technical data 3.1 Machine dimensions Length, width & height See machine layout 3.2 Weight 180 kg approx. (without labels) 3.3 Utilities Electrical Voltage No. of phases Frequency Energy consumption per hour (average) Installed power Current protection Compressed air V AC 1 + N + PE 50 Hz / 60 Hz 0.1 kwh 0.2 kw Min. 6 A up to max. 16 A Air type Pressure Supply pipe diameter Consumption Clean and dry 6 bar 6/4 mm 0.3 Nm 3 /h approx. 4

5 3.4 Working characteristics Product dimensions Length, width & height There are no product dimension limitations for the PLM Labels Note: The labels must be food approved quality and preferably self-adhesive. The functionality of all label types must be tested by CSC before use. Therefore one label roller must be sent to CSC for testing. It is the responsibility of the customer to ensure that labels comply with all local rules and regulations. Label and ribbon roller Label dimensions Label data Outer diameter of label roller 350 mm max. Inner diameter of label roller 76 mm Ribbon length 560 m max. (ribbon change 1 to 3 times per shift, at 15 ppm, depending upon label length) Length Width Print width area mm max mm max. 108 mm max. (4 inch) or 162 mm max. (6 inch) Up to 50 variable data entries 1-20 bar codes (1D, 2D) Functional details Print method Print resolution Printing speed Operator Thermal transfer or direct thermal 300 dpi 200 mm per second max. 1 operator to apply labels 5

6 4 Configuration 4.1 Standard Product Labeling Module complete, delivered with housing and cables for connection Air connection to BLR1 Markem-Imaje printer series 2000, equipped with a 4 printing head Technical manual Declaration of Incorporation 4.2 Versions Markem-Imaje printer series 2000, equipped with a 6 printing head 4.3 Options Maintenance unit Spare parts kit Spare parts kit 4 Description CABLE FOR PHOTOCELL 5M 1 SENSOR 1 KIT PRINTHEAD 1 CLOTHS CLEANING 1 Qty Spare parts kit 6 Description Qty CABLE FOR PHOTOCELL 5M 1 SENSOR 1 KIT PRINTHEAD 6IN 300 DPI HC 1 CLOTHS CLEANING 1 6