DILLARD'S INC TEST PROTOCOL FOR DILL USA (V4) CLOCK - ELECTRIC / BATTERY POWERED WITH THERMOMETER HYGROMETER

Transcription

1 DILLD'S INC TEST POTOCOL FO DILL US (V4) CLOCK - ELECTIC / BTTEY POWEED WITH THEOETE HYGOETE Page 1 of 5 Criteria esults ating SCOPE: This protocol is used to test battery operated or electric clock, which may include the features of radio, thermometer, hygrometer, etc. SUPPLEENTY POTOCOL Note: dditional cost, sample size and TT may be required if testing to 1 or more supplemental protocols is necessary. Please refer to the below referenced supplemental protocol(s) for additional information. California Proposition 65 Federal Communications Commission (FCC) Part 15 / Industry Canada Document anagement Electrical Safety udit (UL Star udit) Primary Battery Powered Product Test Statements LBELING US Packaging labeling Country of origin marking Use labeling Client acceptable safety agency labeling Safety agency listing verification Clock - Special arkings DILL-N-PTCL US N / CPSD-EL N N F.P. and L. ct (16 CF 500) O NIST Uniform Laws and egulations Handbook The sample should be reviewed against the requirements of California Proposition Electronic products shall have complied with FCC / Industry Canada regulations appropriate for the country of destination as shown by evaluation to the cited protocol. Products under FCC Verification or Declaration of Conformity must be submitted with complete and correct test reports. Designs claimed to be exempt from FCC / IC equipment authorization due to an un-obvious feature (like electronic frequency), must be submitted with acceptable supporting technical documents. -- [For Household Electric Clocks] Shall pass 3 star electrical safety audit. -- Shall pass Primary Battery Powered Product module. 1 Packaging shall be labelled with the following, Product Identification Net quantity of contents shall be expressed in terms of weight or mass, measure, numerical count, or combination so as to give accurate information to facilitate consumer comparison (U.S. and metric units) anufacturer, packer, or distributor s name & address (City, State & Zip Code) 19 CF Shall indicate country of origin legibly, permanently, and in comparable size and close proximity to any mention of country other than country in which the article was manufactured or produced. ust be visible at point of purchase. CPSD-EL CF , 19 CF 11.9, Chapter 1 Use/care instructions shall be clear, concise and understandable, provide step-by-step method of use and be provided in language appropriate to destination countries. Provide a copy of the instructions in the report. 1 Shall have valid UL, CS, ETL or BV Safety gency Listing mark for US and/or Canada appropriate for country of destination. eport ark. 1 Verify client acceptable safety agency listing by contacting listing agency with the sample's listing number, manufacturer, model number, and/or agency control number. Shall be verified. 1 ovement: ust list the country of origin, name of manufacturer and number of jewels. Clock: ust list the country of origin.

2 DILLD'S INC TEST POTOCOL FO DILL US (V4) CLOCK - ELECTIC / BTTEY POWEED WITH THEOETE HYGOETE Page 2 of 5 91 Note 4 Harmonized Tariff Schedule US NLYTICL Total lead in surface coating CPSC-CH-E / CPSD-N PHYSICL CHCTEISTICS Dimensions Weight Parts inventory Clock - adjustment range Clock - adjustment range Clock Type Numeral size Numeral size Thermometer - temperature range (ºF or ºC) Hygrometer - humidity range (%) Hygrometer - humidity divisions Criteria esults ating Clocks with opto-electronic displays (LCD and LED) are excepted from the special marking requirements. 1 ll accessible surface coatings in the as received state on items outside of the scope of 16 CF 1303 shall not contain lead or lead components in which the lead content is in excess of 0.009% (90 ppm) of the weight of the total content. eport actual results or include data table within report. Component testing is allowed. Compositing up to 3 colors is allowed. Client requirement 1 eport overall dimensions; shall meet label claims. 1 eport overall weight; shall meet label claims. 1 Shall meet label claims. ll listed hardware must be provided. 1 [aximum (min./sec.)] Shall meet label claims (if applicable). 1 [inimum (min./sec.)] Shall meet label claims (if applicable). 1 eport: nalog Or Digital 1 [nalog] Shall be legible and greater than 3/16 of an inch in height. 1 [Digital] Suitable for use, all digit LED s shall be functional. 1 eport overall temperature range and divisions/ increments; shall meet label claims (If applicable). 1 eport overall range; shall meet label claims (If applicable). 1 eport overall range; shall meet label claims (If applicable).

3 DILLD'S INC TEST POTOCOL FO DILL US (V4) CLOCK - ELECTIC / BTTEY POWEED WITH THEOETE HYGOETE Page 3 of 5 (%) WOKNSHIP Hazardous sharp point and sharp edge Defects and workmanship PEFONCE ctual use - functionality esistance to corrosion Durability Drop test Handle strength Clock accuracy larm ccuracy Hand Synchronicity Calendar - analog Features and functions Sound quality 16 CF & 49 (od) ST B (mod) / CPSD-HL CPSD-HL / CPSD-HL / CPSD-GB / CPSD-EL- 1 Shall have no sharp points / edges, other than those required for function. odification: Expanded scope to other products. Criteria esults ating 1 Shall have no discernible surface degradation, including crazing, shivering, denting, bubbles, cracks, stains, deformations, chips, fractures, heavy lines, waves, shear marks, scratches, scuff marks, indentations, or blisters. Shall have no components missing, malformed, and/or fractured. 1 Shall function as intended as received. eport details of evaluation (features tested / methods used / materials used / etc.) eport any features not evaluated. 1 [pplicable to samples / sample components constructed of metal or samples with metallic coatings that can be exposed to the environment] Shall withstand 24 hours in 1% salt spray (fog) with no noticeable oxidation / corrosion / visual changes. odification = 1% salt spray (fog). 1 ll switches, moving or functioning parts shall withstand a minimum of 100 cycles with no loss of serviceability. 1 Shall withstand 3 drops from a distance of 914 mm (3 feet) to strike a hard wood surface, without cracking or expose of live parts. Shall be function as intended after drops. eport discrepancies and drop number. 1 Handle shall withstand min. 2 x actual weight of product, with no failure. 1 ccurate within one minute over one week. 1 ccurate In 10 Out Of 10 epetitions 1 Shall be within + / - 5 minutes for the minute hand when the hour hand is centered on the floor 1 Change shall occur between 23:30 and 24:00; day and date shall be properly aligned. 1 [Snooze feature time] ust match label. 1 ust be suitable for use. eport discrepancies.

4 DILLD'S INC TEST POTOCOL FO DILL US (V4) CLOCK - ELECTIC / BTTEY POWEED WITH THEOETE HYGOETE Page 4 of 5 Criteria esults ating adio reception 1 cceptable reception throughout the entire tuning range. Station drift Effects of extreme temperature change ccuracy CPSD-HL No station drift during 4 hours of normal use hours at 0 F and 120 F - No failure or visual change % of range: accurate to within two graduations 30-70% of range: accurate to within one graduations % of range: accurate to within two graduations. No. Of equired for Complete Testing No. Of (Fully Packed) Cartons For Transit Testing: No. Of Working Days For Complete Testing: 3 1 (Only upon Dillard s request) 7 Client pproval: Creation Date: Last evision Date: Pricing eview Date Technical eview Date: Lucy Feng 22/Sep/ /Jul/ /Sep/2016 Key dditional Charge For This Test andatory egulatory esult Key C N Claimed ecorded eets Does Not eet

5 DILLD'S INC TEST POTOCOL FO DILL US (V4) CLOCK - ELECTIC / BTTEY POWEED WITH THEOETE HYGOETE Page 5 of 5 esult Key N NT Not pplicable Not Tested ating Key PSS FIL N Pass Fail Not equested