SIMATIC Ident Industrial Identification Systems

Transcription

1 SIMATIC Ident Industrial Identification Systems Catalog ID Introduction System overview SIMATIC Ident 1 RFID systems for the HF frequency range SIMATIC RF200 SIMATIC RF300 MOBY D 2 The products and systems described in this catalog are manufactured/distributed under application of a certified quality management system in accordance with DIN EN ISO The certificate is recognized by all IQNet countries. RFID system for the UHF frequency range 3 SIMATIC RF600 RFID system for the microwave frequency range MOBY U 4 Supersedes: Catalog ID Refer to the Industry Mall for current updates of this catalog: The products contained in this catalog can also be found in the Interactive Catalog CA 01. Order No.: E86060-D4001-A510-D Please contact your local Siemens branch Siemens AG 2012 Code reading systems Stationary code reading systems Handheld reading systems Verification systems Optical character recognition (OCR) Communication modules for RFID systems and code reading systems RFID standard cables 5 6 Appendix 7

2 1/2 Siemens ID Siemens AG 2012

3 Answers for industry. Siemens Industry answers the challenges in the manufacturing and the process industry as well as in the building automation business. Our drive and automation solutions based on Totally Integrated Automation (TIA) and Totally Integrated Power (TIP) are employed in all kinds of industry. In the manufacturing and the process industry. In industrial as well as in functional buildings Siemens offers automation, drive, and low-voltage switching technology as well as industrial software from standard products up to entire industry solutions. The industry software enables our industry customers to optimize the entire value chain from product design and development through manufacture and sales up to after-sales service. Our electrical and mechanical components offer integrated technologies for the entire drive train from couplings to gear units, from motors to control and drive solutions for all engineering industries. Our technology platform TIP offers robust solutions for power distribution. The high quality of our products sets industry-wide benchmarks. High environmental aims are part of our eco-management, and we implement these aims consistently. Right from product design, possible effects on the environment are examined. Hence many of our products and systems are RoHS compliant (Restriction of Hazardous Substances). As a matter of course, our production sites are certified according to DIN EN ISO 14001, but to us, environmental protection also means most efficient utilization of valuable resources. The best example are our energy-efficient drives with energy savings up to 60 %. Check out the opportunities our automation and drive solutions provide. And discover how you can sustainably enhance your competitive edge with us. Siemens ID /3

4 Setting standards in productivity and competitiveness. Totally Integrated Automation. 1/4 Siemens ID

5 TIA is characterized by its unique continuity. It provides maximum transparency at all levels with reduced interfacing requirements covering the field level, production control level, up to the corporate management level. With TIA you also profit throughout the complete life cycle of your plant starting with the initial planning steps through operation up to modernization, where we offer a high measure of investment security resulting from continuity in the further development of our products and from reducing the number of interfaces to a minimum. The unique continuity is already a defined characteristic at the development stage of our products and systems. The result: maximum interoperability covering the controller, HMI, drives, up to the process control system. This reduces the complexity of the automation solution in your plant. You will experience this, for example, in the engineering phase of the automation solution in the form of reduced time requirements and cost, or during operation using the continuous diagnostics facilities of Totally Integrated Automation for increasing the availability of your plant Thanks to Totally Integrated Automation, Siemens provides an integrated basis for the implementation of customized automation solutions in all industries from inbound to outbound. Siemens ID /5

6 SIMATIC Ident for more economic production and logistics processes Fiercer competition, stricter standards and legal regulations, shorter product life cycles, more individual customer requirements and increasingly globalized value-adding chains: to stay ahead in dynamic markets, companies must increase the efficiency of their value-adding chains - in production control, asset management, tracking & tracing as well as in supply chain management. Through the use of innovative identification technology, companies gain an important advantage. We offer SIMATIC Ident, a unique portfolio for industrial identification which can provide the perfect solution for your requirements while keeping you flexible for the future. The right identification technology depends on factors such as sensing distance, lighting conditions, single or repeat markings, as well as environmental effects such as temperature and pollution. Whether RFID, barcode, DMC or OCR: every technology has its specific strengths. Character recognition is used for cases in which codes must also be readable by persons, such as use-by dates. 2D codes and RFID impress customers with their high level of data security and have proved reliable even under harsh industrial conditions. The decisive criterion for an identification system: Your individual application. Identification, mobile data storage: RFID RFID is the ideal solution when there is no line of sight between the reader and the marking, large volumes of data or wide ranges are required, or the stored information has to be changed. Here the product or object is fitted with a memory chip that can be programmed and read using radio techniques. With low-cost Smart Labels available for logistics, rugged data memories for assembly lines as well as transponders with a wide range, RFID is perfectly suited to a variety of different applications. Our intelligent SIMATIC RF system family offers you transparency without gaps. Data is therefore available at any time along the complete production and distribution chain - for perfect control and optimization of material flow and logistics. Verification, identification: Code reading systems When higher performance is required, 2D codes are recommended as an alternative to barcodes, because they offer greater memory capacity and a better read rate. They can be applied inexpensively, e.g. together with shipping labels. They also enable products to be marked directly (Direct Part Marking, DPM) using lasers, printing or dot-peening, which is extremely resistant to external influences. 2D codes can be read with complete reliability even from a small viewing angle or under difficult lighting conditions. With SIMATIC code reading systems, we offer you the ideal solution for reading and verifying 1D and 2D codes as well as for text recognition (OCR) - for the reliable tracing of production batches beyond the manufacturing plant. 1/6 Siemens ID

7 Production control All over the world, consumers want more and more individual products. Versatile production and material flow control with industrial identification handles the requirements for growing product variety throughout the manufacturing process. This is made possible by reliable, efficient and cost-effective make-to-order production. SIMATIC S7-400 with CP443-5 PROFIBUS ASM 456 ASM 456 ASM 456 SIMATIC RF260R SIMATIC RF210R SIMATIC RF210R G_FS10_XX_00416 Example configuration of a small assembly line with SIMATIC RF200 Asset management Assets such as tools, plant parts, or containers are essential for production and logistics. Industrial identification ensures they are used efficiently. The inventory can be acquired in real time and the status determined precisely. This means that the use of the assets can be monitored perfectly at any time and optimized specifically for stock quantity, capacity and maintenance. Asset Management System PROFINET X204-2 SIMATIC RF320T W788-1 M12 SIMATIC RF310M SIMATIC RF340T G_FS10_XX_00435 Example configuration of asset management with the SIMATIC RF310M handheld reader Siemens ID /7

8 Tracking & tracing With industrial identification, each product leaves a digital trail that can be seamlessly traced and documented back to the origin of its individual components. This permits full transparency of the entire product life cycle and therefore the best possible quality. Enterprise Resource Planning (ERP) XR552-12M PROFINET SIMATIC S7-300 with CP Advanced X108PoE SIMATIC S with CSM1277 SIMATIC MV440 with PoE SIMATIC MV420 G_FS10_XX_00417 Example configuration of tracking & tracing with code reading systems Supply chain management Competitive production on an industrial scale requires global supply chains for individual parts and components. Industrial identification makes these supply chains transparent and predictable, and facilitate optimum planning. This avoids delivery bottlenecks and downtimes, optimizes warehouse stocks and improves profit margins. Supply Chain Management (SCM) SIMATIC RF640A SIMATIC IPC with RFID Middleware W788-1 M12 W748-1 M12 SIMATIC RF670R G_FS10_XX_00415 Example configuration of a logistics portal with SIMATIC RF600 and IWLAN 1/8 Siemens ID

9 Simple integration into the automation level With our SIMATIC Ident portfolio we can offer you the right solution: Using communication modules and convenient function blocks, it is easy to connect optical and RFID systems to the PLC (such as SIMATIC) or the IT landscape. This ensures that you have a system-wide, uniform software architecture and saves considerable outlay and costs in engineering, commissioning and maintenance. Management level Ethernet Manufacturing Execution Systems (MES) Enterprise Resource Planning (ERP) Control level SIMATIC connection Connection to PC S7-300/ASM 475 ET 200pro/RF170C RFID Middleware PROFINET/ PROFIBUS RS232/RS422 Acquisition level Reader ET 200S with IO-Link master IO-Link RF620A ASM MV / RF160C ANT 18 RF180C/ RF182C (TCP/IP) X108PoE RF220R RF340R RF350R RF210R MV440 RF240R RF630R RF640R G_FS10_XX_00413 Integration in Totally Integrated Automation and serial Simple link-up to third-party systems over PROFINET and PROFIBUS PC/third-party PLC with Ethernet/XML or RS422/RS232 interface Third-party PLC via function block in accordance with IEC or process image PROFINET PROFIBUS RF182C RF180C RF160C/ ASM 456 RF670R RF260R RF380R MV440 RF620R RF210R MV420 MV440 G_FS10_XX_00418 Connection to third-party systems Siemens ID /9

10 1/10 Siemens ID Siemens AG 2012