CREATIVE PRODUCTS WARRANTY RETURN POLICY
|
|
- Aileen Murphy
- 6 years ago
- Views:
Transcription
1 CREATIVE PRODUCTS WARRANTY RETURN POLICY 1. GENERAL INFORMATION Prior to warranty holder ( You ) making any warranty service return of a Creative product ( Product ), You are strongly advised to first: check the available self-help options on the Creative Support Web Page for Your Product model. Self-help options may assist You in promptly resolving the more common issues encountered. This may save You the time and money otherwise involved in sending Your Product to our Service Center. back-up Your information in Your Product that is capable of storing data. Creative is not responsible or liable for any data stored on the Product that is lost, deleted or becomes otherwise inaccessible. All data may be deleted from the Product during servicing. Our Service Center does not back-up Your information nor perform any data retrieval or recovery as part of warranty servicing. 2. SERVICING OF PRODUCT If You have confirmed that Your product requires a warranty service, You can submit an on-line Warranty service request directly to Creative or return to your retailer for warranty service. For all Products under warranty sent to the authorized service center for servicing, Creative will at its sole discretion, perform one of the following: (i) Service or repair the Product; (ii) Replace Product with a new or refurbished product of the same model; (iii) Replace Product with a new or refurbished product model of equivalent value. Where we service or repair the Product under a valid warranty, You will not have to pay for any labor charge or replacement parts. Where we service or repair the Product that is not under a valid warranty, there are service charges (see Section 11 Out-of-Warranty charges). 3. WARRANTY RETURN PROCEDURE We do not facilitate walk-in warranty returns at any service center. All warranty returns must be requested online via the Creative Support Web Page ( After You would have completed/submitted your return request you will be issued with a Return Merchandise Authorization (RMA) number. It is very important that your RMA number is visible on the outside of your parcel so we can easily identify your return. Any warranty return Product without a valid RMA number will be rejected. We reserve the right to return the Product without examination, servicing, repair or replacement, and to charge You for pre-paid shipping (or other transportation) costs. 1
2 All returns must be enclosed with a copy of proof of purchase of the Product by a dated itemized receipt to be eligible for this limited warranty. You should retain the original proof of purchase for the duration of the Warranty Period. Returns without a copy of the proof of purchase may be deemed as out of warranty and will require payment of a service fee (see section 12 Failure to Make Payment). Ensure You carefully pack Your Product so it reaches the authorized service center without damage. As Creative is not responsible for damages incurred in shipping, we recommend you securely pack the product in a box using bubble wrap, foam or packing peanuts. Damage to Your Product caused during shipment or while in transit to the service center will result in a deemed Warranty-Void situation. Creative or its authorized service center will inspect your product. If Creative determines based on the inspection that the product does not require servicing and/or replacement, Creative reserves the right to return the product to you as it is. A minimum non-refundable diagnostic and handling fee will be payable by You if Creative determines that Your Product is not in need of repair or it is warranty-expired or warranty-void. In the event that You fail to make the payment within three (3) months from the date the fee is quoted to you, Creative will dispose of the Product permanently without notice and liability to You. 4. SEND ONLY THE REQUIRED ITEMS You need only return the defective Product, as indicated in your warranty return request, to the service center. Creative is not responsible for other products or accessories returned with the defective item. Do not enclose cables, CDs or other equipment, as these may not be replaced or returned to you. For DOA (Dead On Arrival) cases, You are required to send to the service center all the contents intact in their original condition, including the Product, accessories, manuals, packaging, outer box and all other items received. 5. RMA NUMBER VALIDITY PERIOD A RMA Number is only valid for Thirty (30) calendar days from issue date. You need to ensure the Product reaches the service center before the expiry date. Creative reserves the right to reject the Product should it arrive after the RMA expiry date. In some cases, an may be sent to You for clarification or for payment purpose and requiring You to respond within a stipulated period. Any non-response or late response may result in the Product returned without being serviced or withheld at the service center until full payment is made. 6. WARRANTY REQUEST INFORMATION Any change to the address for return of the serviced Product or other change for that particular transaction is not permitted once a RMA number has been issued. Therefore it is important that You key in Your details correctly. Please contact Creative Customer Support Service via the Creative Support Web Page ( should You require to make any changes on Your warranty request. DO NOT USE A HOTEL/PO/FBO/APO BOX ADDRESS - Deliveries from the service center to boxes at any Post Office (PO), Fleet Post Office (FBO), Army Post Office (APO), Hotel or other such addresses 2
3 cannot be arranged. You must therefore ensure not to use such addresses for the warranty return ticket. Otherwise, it may take a much longer time for the serviced Product to reach the re-directed address. Creative reserves the right to charge You additional administration and shipping (or other transportation) fees for such cases. 7. COST OF SHIPPING You shall bear cost, inclusive of any duties and taxes, of shipping (or other transportation) of the Product to the authorized service center for any RMA return. Creative shall bear the cost of shipping (or other transportation), inclusive of any duties and taxes, from the service center back to You after completing the warranty service. 8. RISK OF LOSS OR DAMAGE You are responsible for arranging shipping (or other transportation) to the authorized service center and all the costs involved. Risk is only transferred to us when the service center receives the warranty return Product (please see Section 9). Prior to that, we are not responsible for the Product, including any damage or loss during shipment or while in transit. We are responsible for arranging shipping (or other transportation) from the service center to the designated address provided on the warranty return request and the costs involved, unless otherwise stated in writing. Risk is transferred to You upon delivery at the designated address irrespective of the recipient who acknowledges or takes delivery of Your Product. 9. PRODUCT ARRIVES AT SERVICE CENTER DAMAGED OR WITH DISCREPANCIES You must ensure the warranty return Product and the Product which You declare to get the warranty return service are one and the same. You should also declare any pre-existing or user-induced damage to minimize the need for investigation and further processing. Otherwise, the service center may not service and return the serviced Product within the typical turnaround time stipulated in Section 13 (Service Turnaround Time). If You fail to declare pre-existing or user-induced damage when requesting a warranty return or if Your Product is damaged during shipment or while in transit, we will You requesting payment of a Warranty-Void fee to service the Product. The determination by the service center on what amount to pre-existing damage or user-induced damage or otherwise is final even if You are able to produce supporting evidence to the contrary or the evidence is inconclusive. 10. PRODUCT MODEL TRANSITION From time to time, certain Product models will reach End of Service Life. This means that in spite of a valid warranty, any warranty returns for such Product models may not be serviced, but may be replaced by a more recent model, equivalent-price range product as solely determined by us. The warranty return procedure to follow is the same. 3
4 11. OUT-OF-WARRANTY CHARGES Depending on the age of your product and the availability of parts, it may be possible for Creative to provide an out-of-warranty repair or replacement service for a fee. Please refer to Creative Support Web Page or contact Creative Customer Support Service for the charges applicable for Your Product model. 12. FAILURE TO MAKE PAYMENT You may be required to make credit card payment for certain warranty return cases, such as for servicing of Warranty-Void, or Warranty-Expired products. Should You fail to make payment, we reserve the right: Not to process the warranty return request. Not to process the warranty returned Product received and shall return to You as it is. Withhold the Product that has been serviced until full payment is made. In the event that the required payment is not made within 3 months of sending You a notification, Your Product will be treated as unwanted and may be handled as we deem fit, including permanent disposal, without notice and liability to You. You shall have no claims against us and would still be obliged to pay for services rendered. 13. SERVICE TURNAROUND TIME Generally, the RMA turnaround time is business days from the day it was received. If no product is received after 15 business days, please contact Creative Customer Support Service via the Creative Support Web Page for further assistance. 14. SERVICE STATUS Upon a successful RMA being issued and sending Your Product to the service center, You may check the service status at Creative Support Web Page. 15. INSPECTION OF SERVICED PRODUCT Immediately upon delivery of the serviced Product, You are to check the packaging and the serviced Product. Should there be any significant damage to the packaging or obvious condition concerns with the serviced Product, You may decline to take delivery and immediately contact Creative Customer Support Service for assistance. By any recipient taking delivery of the serviced Product at the designated address, You are deemed to have accepted that the serviced Product from the service center is proper, correct and in good condition. 4
5 If You encounter any defect after taking delivery of the serviced Product, You would need to raise a new warranty return request and re-send the Product to the service center for further servicing in accordance with the applicable warranty terms. 16. REFER TO LIMITED HARDWARE WARRANTY ACCOMPANYING PRODUCT From time-to-time, we may update this Warranty Return Policy without notice. In such a situation, we will still process Your warranty return request according to the most current Limited Hardware Warranty Policy and Warranty Return Policy at Creative Support Web Page. However, the terms of the Limited Hardware Warranty or other warranty document accompanying the Product, including any updates, shall take precedence over the online policies. 17. CONTACTING US ON WARRANTY RETURN POLICY If You have any questions or wish to clarify on our Warranty Return Policy, please contact Creative Customer Support Service via the Creative Support Web Page for further assistance. 5
Return Material Authorization (RMA) Process
Return Material Authorization (RMA) Process This document outlines Top Global USA Inc. s Return Material Authorization (RMA) process. 1. Standard Hardware Warranty Policy The length of a warranty term
More informationBeach House Cargo Lifts Branded Product of Cargo Lift Distributors
Beach House Cargo Lifts Branded Product of Cargo Lift Distributors Conditions of Sale Price Agreement Manufacture Suggested Retail Price (MSRP) Prices and Terms Order Processing Shipping and Delivery Warranty
More informationDerive Systems, Inc. Pricing, Ordering and Returns Policy
Derive Systems, Inc. Pricing, Ordering and Returns Policy The following describes generally the policies and procedures that apply to your orders ( Orders ) for Derive merchandise and services placed on
More informationCUSTOMER S OWN MATERIALS (COM)
Furniture Terms & Conditions of Sale ACCEPTANCE The terms and conditions set forth herein represent an offer by Pizzuto Furniture to sell product to the purchaser. The purchaser s acceptance of a Pizzuto
More informationQualstar Technical Support
Qualstar Technical Support Effective January 1, 2015 Qualstar Announces New Three Tiered Service Program. Below are the key features of each support package available in Qualstar s three tiered service
More informationClose To My Heart Consultant Manual Procedures United States
Close To My Heart Consultant Manual Procedures United States Home Office Information Our dedicated office staff is here to offer assistance to Consultants who have questions pertaining to orders, commissions,
More informationSKYSHOP USA AGREEMENT FOR SERVICES AND GENERAL OBLIGATIONS 1 SERVICES IN GENERAL: This agreement is entered into by and between Expedited Global
SKYSHOP USA AGREEMENT FOR SERVICES AND GENERAL OBLIGATIONS 1 SERVICES IN GENERAL: This agreement is entered into by and between Expedited Global Group, LLC dba SkyShop USA, (hereinafter referred to as
More informationProduct Warranty Program
Product Warranty Program 1 WARRANTY PROGRAM 1.1 Definition Tranax Technologies, Inc. provides a limited one (1) year parts warranty and a 30(thirty) day labor warranty for the Mini-Bank 1500, 2150, 2250
More informationTerms of Trade GENERAL SELLER S OBLIGATIONS. Terms of Trade web-parts.com, 7. March is owned by
Terms of Trade www.web-parts.com is owned by Webparts A/S Engelsholmvej 26 DK-8940 Randers SV Tel: +45 8713 1700 E-mail: mail@web-parts.com VAT-no.: DK35527796 GENERAL www.web-parts.com (WP) is an internet-based
More informationWUPRPM Regulations and Procedures Effective: November 11, 2005 R. Purchasing and Financial Obligations Revision Date: July 1, 2015.
Table of Contents 1. Purpose... 3 2. Definitions... 3 3. Limits and Thresholds... 4 4. Competitive Bidding... 4 5. Request for Quotation/Request for Proposal... 5 6. Bid Information... 5 7. Bid Bonds...
More information1. DEFINITIONS 2. ORDERS, PRICES AND FEES
Exhibit C GENERAL TERMS AND CONDITIONS - INTERNATIONAL The following are the Terms and Conditions under which TRANSCORE, LP, a Limited Partnership chartered in Delaware, United States of America or its
More informationGeneral service/support/repair/warranty policy for all Partner agreements
General service/support/repair/warranty policy for all Partner agreements 1 GENERAL 1.1 Partner is obligated to support his customers and the sold Products, and to assist the customer in arranging the
More information(3) If you have cause for complaint, you may contact us using the information provided in the first paragraph.
1 Scope (1) The following terms and conditions form an integral part of any contract between Kannaway Europe sp. z o.o., Przemysłowa 6, 05-092 Blizne Łaszczyńskiego, Poland, VAT ID. 1182153795, REGON 368316614,
More informationClaims & Returns Guidelines Sirona Dental Systems GmbH (Status September 2018)
Claims & Returns Guidelines Sirona Dental Systems GmbH (Status September 2018) 1 General 1.1 Range of validity This document is valid for all dealers worldwide, except where individual customer agreements
More informationTERMS AND CONDITIONS OF SALE
TERMS AND CONDITIONS OF SALE GENERAL Conditions of Sale: These Terms and Conditions of sales ( Agreement ) shall apply to all sales of products by LF Illumination, LLC. As used in these Terms and Conditions
More informationOLYMPUS PRODUCT SERVICE REPAIR FORM Ref:
Australia Wide Customer Service Customer Service & Repairs Phone: 1300 659 678 Customer Service & Repairs Fax: (02) 9889 7988 OLYMPUS PRODUCT SERVICE REPAIR FORM Ref: Delivery Details: (please tick) Customer
More informationPATTON ELECTRONICS COMPANY ENHANCED WARRANTY QUICK REFERENCE. 5-Year Enhanced Warranty for RAS
Name: 5-Year Enhanced Warranty for RAS Product Manager: David Dibert Contact: dibert@patton.com Patton s Enhanced Warranty extends the standard Patton warranty to five years at a very aggressive price
More informationGENERAL TERMS AND CONDITIONS OF DOMESTIC SERVICE BY TNT EXPRESS WORLDWIDE (Poland) Sp. z o.o. ( ) - long form Warsaw, Annopol 19 Street
GENERAL TERMS AND CONDITIONS OF DOMESTIC SERVICE BY TNT EXPRESS WORLDWIDE (Poland) Sp. z o.o. (01-2016) - long form 03-236 Warsaw, Annopol 19 Street The following conditions determine the manner of receiving,
More informationTERMS AND CONDITIONS May 15, 2017
TERMS AND CONDITIONS May 15, 2017 TERMS AND CONDITIONS All orders placed with Chemteq are subject to all the terms and conditions detailed below. No change, alteration, deletion or modification of any
More information2. Requirements for the Provision of Services, Service Period and Remuneration
Terms of Service / Service Levels 1. Preamble a. The customer has the opportunity to order services subject to fees from Thomas- Krenn.AG in connection with the products purchased from. The customer can
More informationNOTICE INVITING QUOTATIONS. File No. NITT/F.No. 020/PROJ/ /DAC Date:
NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPALLI - 620 015 DEPARTMENT OF ACADEMIC OFFICE NOTICE INVITING QUOTATIONS File No. NITT/F.No. 020/PROJ/2018-19/DAC Date: 10.10.2018 To Sealed quotations are invited
More information2623 Grand Blvd., Suite 201, Holiday, FL (727)
(727) 940-2922 www.bulletspeedanddesign.com Greetings, We would like to take this opportunity to extend our appreciation for having trust in us to exceed your expectations by providing the best product
More informationTERMS AND CONDITIONS: (Stated in U.S. Dollars):
TERMS AND CONDITIONS: (Stated in U.S. Dollars): Kim Lighting, (hereinafter Kim ) Kim hereby gives notice of its exception to any different or additional Terms and Conditions other than as stated herein
More informationThomas-Krenn Service GTCs
Thomas-Krenn Service GTCs You can arrange for additional support and other services (hereinafter: services ) subject to fees with in connection with the purchase of hardware at. You can select from the
More informationWarranty Information. Warranty Period: LIMITED MANUFACTURER'S WARRANTY.
Warranty Information You are entitled to the manufacturer's limited expressed warranty, if any, that accompanies the product. Monoprice.com makes no additional or independent warranty. All other warranties,
More informationDrive Services Policy and Warranty Information
Project: ISO doc: P 1206121 Michael Vallier Dan Reshel Dec 12, 2013 C 1 / 10 This document is a supplement to the ABB Inc. General Terms and Conditions of Sale (publication number ABBGTC073101). This document
More informationORDER FORM. Compile and send pages 1 and 2, also pag. 3 for the flight helmets, using the preferred method (WRITE IN BLOCK LETTERS)
Page 1 of 6 ORDER FORM Compile and send pages 1 and 2, also pag. 3 for the flight helmets, using the preferred method (WRITE IN BLOCK LETTERS) FAX 0039-075-9288922 e-mail online@uniteddesign.it Post Mail
More informationPos Service Holland (SA) Pty Limited
1. Definitions 1.1 In these general conditions it is understood under: Supplier: Customer: Pos Service Holland (SA) Pty Ltd T/A PSH-SA Every natural or legal person with whom supplier negotiates concerning
More informationTerms & Conditions of Sale May Applications of Standard Terms. Prices and Payment. Taxes
Applications of Standard Terms Sales of Studio TK products are made only on Studio TK s standard terms and conditions of sale which are contained in the Price & Product Guide and in Studio TK s order acknowledgements.
More informationWholesale Terms of Sale
Wholesale Terms of Sale Approval Process & First Order All orders are subject to corporate approval by The Thymes LLC, a Delaware limited liability company ( Thymes ). Opening Order Requirements Thymes
More informationAttendees must also abide by the terms and conditions of the venue in which the performance is held.
TICKETING POLICY Tickets to Bangarra Dance Theatre events are sold by Bangarra Dance Theatre and third parties including ticketing agents and venue box offices. Tickets purchased through Bangarra Dance
More informationThis refund policy relates solely products and services and specifically excludes donations where a tax-deductible receipt has been issued.
The following policy is based upon the Australian Competition and Consumer Commission guidelines and subject to changes in legislation. The current legislation will take precedence over this policy where
More informationPest Management. Telephone Page 1 of 12.
Pest Management Telephone 1300 132 570 Page 1 of 12 This is an interactive catalogue, clicking on the Contents and Index pages will take you directly to the specified page Contents Product Category Index
More informationGENERAL TERMS OF SALE
GENERAL TERMS OF SALE These general terms of sale (the Terms of Sale ) are applicable to the offer for sale and sale of products ( Products ) on the website www.pauleka.com (the Website ) by Paule Ka,
More informationTABLE OF CONTENTS. 1 P a g e
TABLE OF CONTENTS INTRODUCTION... 2 Foundation...2 Overview...2 Goal...2 Authorised Service Partner Facilities & Function...2 CONTACT INFORMATION... 3 Panasonic Head Office...3 Toughbook Authorised Service
More informationBlue Point Engineering
Buyer - Sold To: Today's Date: Name: Company Name: Address: Blue Point Product Order Form Please Print Information 213 Pikes Peak Place Longmont, Co 80504-3033 Phone (303) 651-3794 Card Payment Type: Name
More informationPlease Sign and Date Above and Initial Each of the Following Pages and Fax Back to or scan & to
New Client Application and Duplication & Fulfillment Agreement Basic Information (Please print clearly) Company Name: Name of Primary Contact: Phone: Email: Physical Address: City: State: Zip: Billing
More informationPOLICY AND PROCEDURE MANUAL
Dayton Parts, LLC. P.O. Box 5795 Harrisburg, PA 17110-0795 (800) 233-0899 (800) 225-2159 Fax POLICY AND PROCEDURE MANUAL 1. Contact/Ordering information 2. Business Hours 3. Products 4. Prices 5. Price
More informationFREQUENTLY ASKED QUESTIONS (FAQ)
FREQUENTLY ASKED QUESTIONS (FAQ) Am I responsible to enter Receipts on PeopleSoft? If you take delivery of goods from a vendor, you may be required to enter the receipt on PeopleSoft. If you certify performance
More informationMaster Sales Agreement and Policy Statement
Master Sales Agreement and Policy Statement Mission Statement Our goal is to exceed expectations in our products and service for each and every order that we receive. Through our relentless aspiration
More informationGeneral Warranty Information, Policies & Guidelines
General Warranty Information, Policies & Guidelines This section contains information about SCIFIT s policies and guidelines involving the support of its products that apply to all products marketed by
More informationShipping Options - Continental U.S.
Shipping Options - Continental U.S. Shipping carriers AutomationDirect utilizes our choice of carrier for the default shipping methods for all orders. All shipping charges are prepaid and added to the
More informationHOW TO USE THIS STANDARD LONG TERM AGREEMENT (LTA) TEMPLATE:
HOW TO USE THIS STANDARD LONG TERM AGREEMENT (LTA) TEMPLATE: This agreement should be used when establishing a new Long Term Agreement (LTA) with a supplier, in line with UN Women Financial Rules and Regulations
More informationSending Items to NRG Systems
Sending Items to NRG Systems INTERNATIONAL CUSTOMERS Completing the Return Process 1. Contact NRG Systems to obtain an RMA number (Return Material Authorization). Write the RMA number clearly on all shipping
More informationRMA Process Outline FOR SUPPLIERS BASED OUTSIDE U.K
RMA Process Outline Ordered Wrong Item Faulty? Changed Mind Incorrect Item Sent Visit /support Check FAQ s. Does this help? Products must be returned within 14 days of purchase Contact iboardtouch for
More informationTo Our Prospective Customer:
To Our Prospective Customer: Thank you for your interest in doing business with Dallas Pen Company. Attached you will find the forms necessary for our consideration. Please execute all applicable forms
More informationFREQUENTLY ASKED QUESTIONS (FAQ)
FREQUENTLY ASKED QUESTIONS (FAQ) Am I responsible to enter Receipts on PeopleSoft? If you take delivery of goods from a vendor, you may be required to enter the receipt on PeopleSoft. If you certify performance
More informationMidwest Dental Routing Guide
Midwest Dental Routing Guide 2011 Purchasing Department Midwest Dental Equipment and Supply 2700 Commerce St. Wichita Falls, TX 76301 (940) 322-4592 P a g e 2 Dear Valued Vendors, We would like to inform
More information10810 W. LITTLE YORK RD. #130 - HOUSTON, TX VOICE (713) FAX (713) web: IMPORTANT!!!
10810 W. LITTLE YORK RD. #130 - HOUSTON, TX 77041-4051 VOICE (713) 973-6905 - FAX (713) 973-9352 web: www.twrlighting.com IMPORTANT!!! PLEASE TAKE THE TIME TO FILL OUT THIS FORM COMPLETELY. FILE IT IN
More informationSimatic IT Software Product Specific Terms
Simatic IT Software Product Specific Terms Siemens Product Lifecycle Management Software Inc., or one of its Siemens Industry Software affiliated companies (collectively referred to herein as SISW ), has
More informationterms & conditions of sale International
Applications of Standard Terms Sales of TEKNION products are made only on TEKNION s standard terms and conditions of sale which are contained in the Price & Product Guide and in TEKNION s order acknowledgements.
More informationAMY S KITCHEN COUPON REDEMPTION POLICY AGREEMENT. Effective January 3, 2018
AMY S KITCHEN COUPON REDEMPTION POLICY AGREEMENT Effective January 3, 2018 This Coupon Redemption Policy shall constitute an agreement ( Agreement ) between Amy s Kitchen, Inc. ( Amy s ), retailers of
More informationIf you are not sending display materials in advance, you do not need to return the form or payment.
The BEST Service from BEST Expo!! www.bestexpoinc.com 9084 Owl Road Office Engineering Fall 2017 ECS Career Fair University of Illinois, ARC (Activities and Recreation Center) in Champaign, IL September
More informationPrice List /Terms and Conditions
Price List /Terms and Conditions 1. This Price List contains list prices for spare parts for Williams International Commercial Gas Turbine Engines. 2. METHODS OF CONTACT Orders, Core Returns, or Technical
More informationAddress: City: State: Zip: Day Phone: Fax: 5. Where Were Your Products Purchased and/or Installed: Installer s Name/Company:
ATS Warranty Card & Information For validation of your warranty, and in order for your information to be accessed by ATS, please follow these procedures. 1. MAIL REGISTRATION CARD TO ATS (below) Please
More informationGENERAL TERMS and CONDITIONS OF SALE
GENERAL TERMS and CONDITIONS OF SALE between COMPANIES OF DEATEX GROUP ITALY Hereinafter also named Seller and hereinafter The Client or The buyer Preamble The present Agreement governs the partnership
More informationTERMS & CONDITIONS PARTS SALES
Page 1 of 14 TERMS & CONDITIONS PARTS SALES Effective January 1, 2018 revised 04/2018 Rhino and EarthMaster are registered trademarks of Alamo Group Inc. Page 2 of 14 TABLE OF CONTENTS Parts Policy pg.
More informationSTAINLESS STEEL TIE DOWNS PRODUCT CATALOG 2009
STAINLESS STEEL TIE DOWNS PRODUCT CATALOG 2009 www.nautitool.com Email: steritool@steritool.com Customer Service: 860-230-0012 860-564-6876 Order Department Fax: 860-564-7159 1" Stainless Steel Tie Downs
More informationWheelTime Exchange Standard Terms and Conditions. ZF Services North America, LLC (ZFSNA) 9/1/2015 ZF SACHS Heavy Duty Clutch and Shocks
WheelTime Exchange Standard Terms and Conditions Vendor Name: Date: Program Description: ZF Services North America, LLC (ZFSNA) 9/1/2015 ZF SACHS Heavy Duty Clutch and Shocks Initial Order Set-up Orders
More informationTemplate proposed contract
Template proposed contract Annex IV LONG TERM AGREEMENT LTA No: YEAR/No. DD/MM/YY Date: UNITED NATIONS ENTITY FOR GENDER EQUALITY AND THE EMPOWERMENT OF WOMEN (UN-Women) 220 East 42 nd Street New York,
More informationSPECIFICATIONS FOR TENDER # SUPPLY OF TWO OTOACOUSTIC EMISSION SCREENERS FOR WESTERN HEALTH
SPECIFICATIONS FOR TENDER # 0171-1015 SUPPLY OF TWO OTOACOUSTIC EMISSION SCREENERS FOR WESTERN HEALTH CLOSING DATE: March 4,2010 CLOSING TIME: 11:00 AM (Newfoundland Time) Invitation to Tender for 1.0
More informationTerms and Conditions of Sale
Rev 12-1-17 General Information This price schedule supersedes any and all previous price schedules. We do not honor prices quoted from an obsolete price schedule nor do we honor prices for obsolete products
More informationTERMS OF USE FOR ARZ ELECTRONIC TOLL COLLECTION - ETC SUBSCRIPTION WITH % DISCOUNT
TERMS OF USE FOR ARZ ELECTRONIC TOLL COLLECTION - ETC SUBSCRIPTION WITH 21.74 % DISCOUNT 1. DEFINITIONS 1.1. "ARZ" - refers to Autocesta Rijeka - Zagreb d.d., company for construction and operation of
More informationCanon U.S.A. Inc. Business Policies and Procedures Manual Section No: BPP400 (Logistics)
Canon U.S.A. Inc. Business Policies and Procedures Manual Section No: BPP400 (Logistics) Customer Parts Return Policy BPP-400.31 First Produced: Current Version: Past Revisions: Review Cycle: Applies From:
More informationDREAMTRIPS MARKETPLACE RETURNS, REFUNDS AND EXCHANGE POLICY (RETURNS POLICY)
DREAMTRIPS MARKETPLACE RETURNS, REFUNDS AND EXCHANGE POLICY (RETURNS POLICY) CUSTOMER PRODUCT RETURNS POLICY Effective as of: April 5, 2014 Satisfaction Guarantee We stand behind our products with the
More informationCONSUMER TERMS AND CONDITIONS. K-12 Education Individual Purchase Program
CONSUMER TERMS AND CONDITIONS K-12 Education Individual Purchase Program Binding Agreement Products/Services Purchased and Prices Delivery Shipping General Terms and Conditions Hours Of Operation Eligibility
More informationTerms and Conditions for Listing a PV Module on CEC Approved Product List
Terms and Conditions for Listing a PV Module on CEC Approved Product List Definitions: Applicant means the company or individual, applying to the CEC to have products included on the CEC list of compliant
More informationATM Stamp Consignment Agreement
ATM STAMP CONSIGNMENT AGREEMENT Date: This stamp consignment agreement (the Agreement ) between ( Contractor ) and ( Consignee ), located in [city, state] establishes the parties rights and obligations
More informationAECAA Pty Ltd trading as
AECAA Pty Ltd trading as Automotive Electrical & 4WD Accessories NEW CUSTOMER ACCOUNT INTRODUCTORY HANDBOOK 1 2 2 2 2 3 3 4 4 4 4 5 6 6 7 8 8 8 8 8 8 9 9 9 Introductory Letter About Your Account: Courtesy
More informationISSF Online Shop - Terms and Conditions
ISSF Online Shop - Terms and Conditions Article 1 General (1) The following Terms and Conditions shall apply to all contracts concluded via the ISSF Online Shop between the International Shooting Sport
More informationModel E100 Gauss Meter
Model E100 Gauss Meter 2 Table of Contents 1 INTRODUCTION... 3 1.1 The E100 Features:... 3 1.2 The E100 Applications... 3 2 SAFETY SUMMARY... 4 3 COMPLIANCE STATEMENTS... 5 4 PRODUCT CONTENTS AND INSPECTION...
More informationThe Nutro Company A Division of Mars, Inc.
The Nutro Company A Division of Mars, Inc. Coupon Redemption Policy Updated April 2013 1550 W. McEwen Drive, First Floor Franklin, TN 37067 P: 888.607.4081 F: 615.468.2752 This Coupon Redemption Policy
More informationSiklu Service&Support Plans
Siklu Service&Support Plans Siklu shall provide customer with the support services detailed hereunder, for products purchased directly from Siklu by customer for the duration of the maintenance agreement
More informationSure (Isle of Man) Limited Managed Networks Essential Level Support Service Terms and Conditions
The Sure (Isle of Man) Limited ( Sure ) Managed Networks Essential Level Support Service Terms and Conditions should be read in conjunction with the: General Terms and Conditions, all of which apply. Where
More informationOPTO BRANCH 8. ELATION OPTO BRANCH 8 user manual 1.0
OPTO BRANCH 8 user manual 1.0 ELATION OPTO BRANCH 8 user manual 1.0 2 OPTO BRANCH 8 User Manual 1.0 PRODUCT INFORMATION INTRODUCTION The OPTO BRANCH 8 is a 19 single rack space, 8-way DMX distributor/booster
More informationPROVISIONS FOR NSPA SMALL VALUE PURCHASE ORDERS (October 2017)
PROVISIONS FOR NSPA SMALL VALUE PURCHASE ORDERS (October 2017) 1. SPECIAL AREAS Except as otherwise provided in this purchase order, the Contractor shall not subcontract for use in the performance of this
More informationP R I C E L I S T 1
2018 PRICE LIST 1 Three things can happen with sound in a space, it can bounce off walls and redirect the sound, it can transmit through thin walls, or it can be absorbed in acoustical material. Any space
More informationTerms & Conditions Case Study:
EDUCATION & RESEARCH FOUNDATION Terms & Conditions Case Study: The Tale of TED Electric Supply This research study has been generously sponsored by the NAED Education & Research Foundation s Channel Advantage
More informationDogHouse Systems Plain-English Support Statement
DogHouse Systems Plain-English Support Statement Please take the time to read through this document so you have a full understanding of how our warranty works for you. Now, we bet you're expecting a long-winded
More informationPayment Terminal Services Description
Payment Terminal Services Description Version date: March 2018 1 Introduction This document describes the following standard services Adyen provides to the Merchant with respect to Payment Terminals provided
More informationGeneral Terms and Conditions for the Provision of Domestic Shipping and Postal Services of DHL Parcel Polska Sp. z o.o.
Article 1 General Terms and Conditions for the Provision of Domestic Shipping and Postal Services of DHL Parcel Polska Sp. z o.o. These General Terms and Conditions specify the principles of performing
More informationSwan Purchase Order Acceptance Policy
Swan Purchase Order Acceptance Policy Purchase orders should be submitted via: Email swanezpo@swanstone.com or Fax (800) 342-7926 To ensure accurate and timely processing and shipping of orders, all purchase
More information1.3. The products offered for sale on the Website may only be purchased if delivered to an address in Monaco.
GENERAL TERMS AND CONDITIONS OF SALE 1. Introduction 1.1. The sale of Prada branded products executed remotely through this site (hereinafter referred to as the Website") is governed by the following General
More informationConsumer Basic Hardware Services
Consumer Basic Hardware Services Your System. For purposes of this Agreement, a System is identified as a Dell system comprised of the following components: monitor; central processing unit (CPU); input
More informationEngineering Fall Career Fair University of Illinois, ARC (Activities and Recreation Center) in Champaign, IL September 11-12, 2018
The BEST Service from BEST Expo!! www.bestexpoinc.com 9084 Owl Road Dear Exhibitor: Engineering Fall Career Fair University of Illinois, ARC (Activities and Recreation Center) in Champaign, IL September
More information2.5 Your VIP Membership Account is not transferable to another person.
ROBINS KITCHEN VIP LOYALTY PROGRAM TERMS AND CONDITIONS 1. About the Robins Kitchen VIP Loyalty Program 1.1 The Robins Kitchen VIP Loyalty Program (Program) is operated by Global Retail Brands Australia
More informationClassy Glass, Inc. General Terms and Conditions
ORDERS: Classy Glass, Inc. General Terms and Conditions Orders may be made by phone, fax, e-mail, or letter. Orders made by phone must be confirmed in writing, preferably by fax or email. (Faxes and emails
More information4300 WINDFERN RD #100 HOUSTON TX VOICE (713) FAX (713) web: twrlighting.com IMPORTANT!!!
4300 WINDFERN RD #100 HOUSTON TX 77041-8943 VOICE (713) 973-6905 FAX (713) 973-9352 web: twrlighting.com IMPORTANT!!! PLEASE TAKE THE TIME TO FILL OUT THIS FORM COMPLETELY. FILE IT IN A SAFE PLACE. IN
More informationFinance Chapter STATE OF ALABAMA DEPARTMENT OF FINANCE ADMINISTRATIVE CODE CHAPTER DIVISION OF PURCHASING TABLE OF CONTENTS
Finance Chapter 355-4-1 STATE OF ALABAMA DEPARTMENT OF FINANCE ADMINISTRATIVE CODE CHAPTER 355-4-1 DIVISION OF PURCHASING TABLE OF CONTENTS 355-4-1-.01 Repeal Of Previous Rules 355-4-1-.02 Definitions
More informationModel M120 Mini Temperature/Humidity Meter
Model M120 Mini Temperature/Humidity Meter 2 Table of Contents 1 INTRODUCTION... 3 1.1 The M120 features:... 3 2 SAFETY SUMMARY... 4 3 COMPLIANCE STATEMENTS... 5 4 PRODUCT CONTENTS AND INSPECTION... 5
More informationSTANDARD TERMS OF PURCHASE
1. PARTIES 1.1. This document sets out the standard terms which will govern the contractual relationship between MAHLE BEHR South Africa (Pty) Ltd ("MAHLE BEHR") on the one hand, and any person ( the Supplier
More informationA copy of the new Standard Vendor Agreement is enclosed. This Vendor Agreement is for the time period of January 1, 2018 to December 31, 2018.
November 2017 Dear Supplier: A copy of the new Standard Vendor Agreement is enclosed. This Vendor Agreement is for the time period of January 1, 2018 to December 31, 2018. The receipt of this vendor agreement
More informationDoor People Counters F F of 7
Door People Counters F100320-00 F100320-00 1 of 7 Order & Delivery of 3D Plus 1.1 Types of Models We also have 2 different type of lens. This depends entirely on the ceiling height that of location that
More informationEngineering Fall Career Fair University of Illinois, ARC (Activities and Recreation Center) in Champaign, IL January 30-31, 2019
The BEST Service from BEST Expo!! www.bestexpoinc.com 9084 Owl Road Dear Exhibitor: Engineering Fall Career Fair University of Illinois, ARC (Activities and Recreation Center) in Champaign, IL January
More informationThe Orleans Hotel Business Center Shipping Policy & Instructions for The 2018 ASBA Show (April 12-14)
The Orleans Hotel Business Center Shipping Policy & Instructions for The 2018 ASBA Show (April 12-14) Any questions or comments regarding shipping should be directed to: John H. Olarte, Business Center
More information2.1 Reliance Courier Distribution undertakes to deliver to an address specified in the despatch documentation, not to a specific person.
Courier Distribution Conditions of Carriage 1. Definitions In these Conditions the following expressions shall have the following meanings: A. "Reliance Courier Distribution" means Reliance Worldwide Logistic
More informationService Description: Dell Asset Resale and Recycling Services - IT Asset Recycling
Dell Services Service Description: Dell Asset Resale and Recycling Services - IT Asset Recycling Service Overview Dell is pleased to provide Asset Resale and Recycling Services. This service offers an
More informationShipping Policy. Shipping Policy. Domestic Shipping Policy
Shipping Policy Thank you for visiting our website and purchasing CCEF products. We hope you find the resources helpful and edifying. CCEF seeks to publish resources that are Christ-centered, practical,
More informationRev A. Vendor Compliance Manual
9004160 Rev A Vendor Compliance Manual Using the Vendor Compliance Manual This manual is designed to provide you with Automation Products Group, Inc. s (APG s) supply chain requirements. Please carefully
More informationPublic Revenue Department. Importers and Exporters
Importers and Exporters 0 What is a supply? VAT will be due where a taxable supply is being made by a taxable person For consideration By any person In the course of conducting business In the UAE A supply
More information