MGT402 Cost and management accounting. All online solved quiz by Fahid Mehmood (22/2/2014)

Size: px
Start display at page:

Download "MGT402 Cost and management accounting. All online solved quiz by Fahid Mehmood (22/2/2014)"

Transcription

1 MGT402 Cost and management accounting All online solved quiz by Fahid Mehmood (22/2/2014) Figure 1 Hope this file will help you n remember me in your prays Ist quiz solved by Fahid Mehmood (11/11/2013) Question # 1 of 20 ( Start time: 04:12:08 PM ) Total Marks: 1 Alpha company purchased a machine worth Rs 200,000 in the last year.now that machine can be use in a new project which company has received this year. Now the cost of that machine is to be called: Project cost Sunk cost. Opportunity cost Relevant cost Question # 2 of 20 ( Start time: 04:13:24 PM ) Total Marks: 1 Which of the following cost is not changed with the change in production level? Prime cost Fixed cost... Conversion cost Variable cost Question # 3 of 20 ( Start time: 04:14:27 PM ) Total Marks: 1 All Indirect cost is charged/record in the head of

2 Prime cost FOH cost... Direct labor cost None of the given options Question # 4 of 20 ( Start time: 04:14:44 PM ) Total Marks: 1 If, Gross profit = Rs. 40,000 GP Margin = 25% of sales What will be the value of cost of goods sold? Rs. 160,000 Rs. 120,000. Rs. 40,000 Can not be determined Question # 5 of 20 ( Start time: 04:15:58 PM ) Total Marks: 1 Increase in material Inventory means: The ending inventory is greater than opening inventory... The ending inventory is less than opening inventory Both ending and opening inventories are equal Can not be determined Question # 6 of 20 ( Start time: 04:16:34 PM ) Total Marks: 1 If, Sales = Rs. 600,000 Markup = 20% of cost What would be the value of Gross profit? Rs. 200,000 Rs. 100,000...sure Rs. 580,000 Rs. 740,000 Question # 7 of 20 ( Start time: 04:18:02 PM ) Total Marks: 1 The component of Factory overhead are as follow Direct material + Indirect material + Direct expences Indirect material + Indirect labor + Others indirect cost... Direct material + Indirect expences + Indirect labor Direct labor + Indirect labor + Indirect expences Question # 8 of 20 ( Start time: 04:18:36 PM ) Total Marks: 1 According to IASB framework, Financial statements exhibit to its users the: Financial position

3 Financial performance Cash inflow and outflow analysis All of the given options...pg15 Question # 9 of 20 ( Start time: 04:19:24 PM ) Total Marks: 1 The components of the prime cost are: Direct Material + Direct Labor + Other Direct Cost...pg2 Direct Labor + Other Direct Cost + FOH Direct Labor + FOH None of the given options Question # 10 of 20 ( Start time: 04:20:26 PM ) Total Marks: 1 When FOH is under applied and charged to Net profit, the treatment would be: Add to operating profit Subtract from operating profit Add to operating expenses None of the given options...pg26 Question # 11 of 20 ( Start time: 04:21:55 PM ) Total Marks: 1 Which of the following is indirect cost? The depreciation of machinery The overtime premium incurred at the specific request of a customer The hire of tools for a specific job All of the given options... Question # 12 of 20 ( Start time: 04:22:45 PM ) Total Marks: 1 A cost unit is The cost per hour of operating a machine The cost per unit of electricity consumed A unit of product or services in relation to which costs are ascertained...pg6 A measure of work output in a standard hour Question # 13 of 20 ( Start time: 04:24:06 PM ) Total Marks: 1 Net sales = Sales less: Sales returns Sales discounts Sales returns & allowances

4 Sales returns & allowances and sales discounts... Question # 14 of 20 ( Start time: 04:25:11 PM ) Total Marks: 1 In which of the following would there be a difference between financial and managerial accounting? Users of the information Purpose of the information Flexibility of practices All of the given options... Question # 15 of 20 ( Start time: 04:25:58 PM ) Total Marks: 1 Which of the following costs is part of the prime cost for manufacturing company? Cost of transporting raw materials from the suppliers premises Wages of factory workers engaged in machine maintenance... Depreciation of truck used for deliveries to customers Cost of indirect production materials Question # 16 of 20 (Start time: 04:27:13 PM ) Total Marks: 1 Which of the following is not true Managerial accounting information is prepared for internal users Preparation of Managerial accounting information is not a legal requirement... There are specific standards of acceptability for managerial accounting The structure of managerial accounting practice is relatively flexible Question # 17 of 20 ( Start time: 04:28:33 PM ) Total Marks: 1 Which of the following would be considered to be an investment centre? Managers have control over marketing Management have a sales team Management have a sales team and are given a credit control function Managers can purchase capital assets and are given a credit control function... Question # 18 of 20 ( Start time: 04:29:54 PM ) Total Marks: 1 Sales are Rs. 450,000. Beginning finished goods were Rs. 23,000. Ending finished goods are Rs. 30,000. The cost of goods sold is Rs. 300,000. What is the cost of goods manufactured?

5 Rs. 323,000 Rs. 330,000 Rs. 293,000 None of the given options... Question # 19 of 20 ( Start time: 04:31:09 PM ) Total Marks: 1 Differential cost has the behavior of? Fixed cost Step cost Variable/semi avriable cost... All of the given options Question # 20 of 20 ( Start time: 04:32:27 PM ) Total Marks: 1 If, Sales = Rs. 800,000 appli Markup = 25% of cost What would be the value of Gross profit? Rs. 200,000 Rs. 160, Rs. 480,000 Rs. 640, Fahid Mehmood Question # 1 of 20 ( Start time: 05:10:32 PM ) Total Marks: 1 Which of the following is correct? Units sold=opening finished goods units + Units produced Closing finished goods units.. Units Sold = Units produced + Closing finished goods units - Opening finished goods units Units sold = Sales + Average units of finished goods inventory Units sold = Sales - Average units of finished goods inventory Question # 2 of 20 ( Start time: 05:12:03 PM ) Total Marks: 1 Cost accounting department prepares that helps the in preparing final accounts. Cost sheets Cost of goods sold statement...15

6 Cost of production Report Material requisition form Cost accounting department prepares reports that help the accounting department in preparing final accounts, these include; Cost of goods manufactured statement Cost of goods sold statement Question # 3 of 20 ( Start time: 05:13:26 PM ) Total Marks: 1 According to IASB framework, Financial statements exhibit to its users the: Financial position Financial performance Cash inflow and outflow analysis All of the given options... Question # 4 of 20 ( Start time: 05:13:40 PM ) Total Marks: 1 Cost accounting concepts include all of the following EXCEPT: Planning Controlling Sharing... Costing Question # 6 of 20 ( Start time: 05:15:12 PM ) Total Marks: 1 If, Gross profit = Rs. 40,000 GP Margin = 20% of sales.what will be the value of cost of goods sold? Rs. 160, Rs. 120,000??? Rs. 40,000 Rs. 90,000 Question # 7 of 20 ( Start time: 05:16:40 PM ) Total Marks: 1 Buyer produced 20,000 units and their total factory cost was Rs. 450,000,other cost like property tax on factory bulding was Rs. 10,000 included in that cost till year ended the cost of per unit would be: Rs Rs.23.5 Rs.24.5 Rs.26.5 ref /20000 =22.5

7 Question # 8 of 20 ( Start time: 05:17:34 PM ) Total Marks: 1 Cost of finished goods inventory is calculated by: Multiplying units of finished goods inventory with the cost per unit... Dividing units of finished goods inventory with the cost per unit Dividing per unit cost with finished goods inventory Deducting total cost from finished goods inventory Question # 9 of 20 ( Start time: 05:18:41 PM ) Total Marks: 1 Differential cost has the behavior of? Fixed cost Step cost Variable/semi avriable cost... All of the given options Question # 10 of 20 ( Start time: 05:18:48 PM ) Total Marks: 1 If, Sales = Rs. 600,000 Markup = 20% of cost What would be the value of Gross profit? Rs. 200,000 Rs. 100, Rs. 580,000 Rs. 740,000 Question # 11 of 20 ( Start time: 05:19:30 PM ) Total Marks: 1 are future costs that effect the current management decision. Sunk Cost Standard Cost Relevant Cost... Irrelevant Cost Question # 12 of 20 ( Start time: 05:19:49 PM ) Total Marks: 1 Where the applied FOH cost is greater than the actual FOH cost it is: Unfavorable variance Favorable variance...pg 24 Normal variance Budgeted variance Where the applied cost is greater than the actual cost it is favorable variance, but where the applied cost is lesser than the actual cost it is unfavorable variance.

8 Question # 13 of 20 ( Start time: 05:20:47 PM ) Total Marks: 1 Net Income before Interest and tax is also called: Operating Income/Profit... Gross Profit Marginal Income Other Income Question # 14 of 20 ( Start time: 05:21:09 PM ) Total Marks: 1 Which of the following is an example of semi variable cost? Salary of supervisor Rent of a building Post paid mobile connection None of the given options Question # 15 of 20 ( Start time: 05:22:38 PM ) Total Marks: 1 The components of the prime cost are: Direct Material + Direct Labor + Other Direct Cost... Direct Labor + Other Direct Cost + FOH Direct Labor + FOH None of the given options Question # 16 of 20 ( Start time: 05:23:00 PM ) Total Marks: 1 The main difference between the profit center and investment center is: Decision making... Revenue generation Cost incurrence Investment Question # 17 of 20 ( Start time: 05:23:33 PM ) Total Marks: 1 Sales are Rs. 450,000. Beginning finished goods were Rs. 23,000. Ending finished goods are Rs. 30,000. The cost of goods sold is Rs. 300,000. What is the cost of goods manufactured? Rs. 323,000 Rs. 330,000 Rs. 293,000 None of the given options...

9 Question # 18 of 20 ( Start time: 05:24:05 PM ) Total Marks: 1 Cost of goods sold can be calculated as follow Cost of goods manufactured... Add Opening finished goods inventory... Less Closing finished goods inventory... Cost of goods manufactured Less Opening finished goods inventory Less Closing finished goods inventory Cost of goods manufactured Less Opening finished goods inventory Add Closing finished goods inventory Cost of goods manufactured Add Opening finished goods inventory Add Closing finished goods inventory Question # 19 of 20 ( Start time: 05:24:42 PM ) Total Marks: 1 Closing work in process Inventory of last year: Is treated as Opening inventory for current year... Is not carried forward to next year Become expense in the next year Charge to Profit & Loss account Question # 20 of 20 ( Start time: 05:25:21 PM ) Total Marks: 1 Amount of net purchase can be calculated as follow Purchase of direct material add trade discount less purchase return add carriage inward less other material handling cost Purchase of direct material less trade discount l add purchase return add carriage inward less other material handling cost Purchase of direct material less trade discount less purchase return less carriage inward add other material handling cost Purchase of direct material less trade discount less purchase return add carriage inward add other material handling cost...pg17 Question # 1 of 20 ( Start time: 09:13:43 AM ) Total Marks: 1 Differential cost has the behavior of?

10 Fixed cost Step cost Variable/semi avriable cost... All of the given options Question # 2 of 20 ( Start time: 09:14:04 AM ) Total Marks: 1 Cost of goods sold can be calculated as follow Cost of goods manufactured... Add Opening finished goods inventory... Less Closing finished goods inventory... Cost of goods manufactured Less Opening finished goods inventory Less Closing finished goods inventory Cost of goods manufactured Less Opening finished goods inventory Add Closing finished goods inventory Cost of goods manufactured Add Opening finished goods inventory Add Closing finished goods inventory Question # 3 of 20 ( Start time: 09:14:16 AM ) Total Marks: 1 Which of the following cost has both features fixed and variable? Step fixed cost Fixed cost Variable cost Semi variable cost... Question # 4 of 20 ( Start time: 09:14:34 AM ) Total Marks: 1 If, COGS = Rs. 70,000 GP Margin = 30% of sales What will be the value of Sales? Rs. 200,000 Rs. 66,667 Rs. 100, Rs. 62,500 Question # 5 of 20 ( Start time: 09:15:22 AM ) Total Marks: 1

11 If, Sales = Rs. 800,000 appli Markup = 25% of cost What would be the value of Gross profit? Rs. 200,000 Rs. 160,000. Rs. 480,000 Rs. 640,000 Question # 6 of 20 ( Start time: 09:16:51 AM ) Total Marks: 1 If, Gross profit = Rs. 40,000 GP Margin = 20% of sales What will be the value of cost of goods sold? Rs. 160, Rs. 120,000 Rs. 40,000 Rs. 90,000 Question # 7 of 20 ( Start time: 09:18:20 AM ) Total Marks: 1 If, Gross profit = Rs. 40,000 GP Margin = 25% of sales What will be the value of cost of goods sold? Rs. 160,000 Rs. 120,000 Rs. 40,000 Can not be determined Question # 8 of 20 ( Start time: 09:19:31 AM ) Total Marks: 1 Manufacturing entities classified the inventory in which of three kinds? Material inventory,wip inventory,finished goods inventory... Material inventory,purchased good inventory,wip inventory Material inventory,purchased good inventory,finished goods inventory WIP inventory,finished goods inventory,purchased good inventory Question # 9 of 20 ( Start time: 09:20:24 AM ) Total Marks: 1 Alpha company purchased a machine worth Rs 200,000 in the last year.now that machine can be use in a new project which company has received this year. Now the cost of that machine is to be called: Project cost Sunk cost.. Opportunity cost Relevant cost

12 Question # 10 of 20 ( Start time: 09:20:36 AM ) Total Marks: 1 The Inventory Turn over ration is 5 times and numbers of days in a year is 365.Inventory holding period in days would be 100 days 73 days days 10 days ref 365/5=73 Question # 11 of 20 ( Start time: 09:21:06 AM ) Total Marks: 1 Direct materials cost is Rs. 80,000. Direct labor cost is Rs. 60,000. Factory overhead is Rs. 90,000. Beginning goods in process were Rs. 15,000. The cost of goods manufactured is Rs. 245,000. What is the cost assigned to the ending goods in process? Rs. 45,000 Rs. 15,000 Rs. 30,000 There will be no ending Inventory... T.FOH (230,000)+ open WIP (15000) CLOSE WIP (X ) = = X X=0 so there will be no ending inventory Question # 12 of 20 ( Start time: 09:22:37 AM ) Total Marks: 1 Sales are Rs. 450,000. Beginning finished goods were Rs. 23,000. Ending finished goods are Rs. 30,000. The cost of goods sold is Rs. 300,000. What is the cost of goods manufactured? Rs. 323,000 Rs. 330,000 Rs. 293,000 None of the given options... X =300,000 X=300, ,000-23,000 X = 307,000 So none of given option is correct Question # 13 of 20 ( Start time: 09:23:13 AM ) Total Marks: 1 Which of the following items of expense are to be add in FOH cost Rent of factory + Head office rent + salaries to factory watchman

13 Rent of factory + factory lighting bill + Directors salaries Rent of factory + factory lighting bill + Factory employees salaries... Head office rent + Factory property tax + Factory small tools Question # 14 of 20 ( Start time: 09:24:07 AM ) Total Marks: 1 The supervisor salary is treated as: Direct labor cost Indirect labor cost... Conversion cost None of the given options Question # 15 of 20 ( Start time: 09:24:22 AM ) Total Marks: 1 Cost of Goods Manufactured can be calculated as follow Total factory Cost... Add Opening Work in process inventory... Less Closing Work in process inventory... Total factory Cost Less Opening Work in process inventory Add Closing Work in process inventory Total factory Cost Less Opening Work in process inventory Less Closing Work in process inventory Total factory Cost Add Opening Work in process inventory Add Closing Work in process inventory Question # 16 of 20 ( Start time: 09:24:41 AM ) Total Marks: 1 Where the applied FOH cost is greater than the actual FOH cost it is: Unfavorable variance Favorable variance... Normal variance Budgeted variance Question # 17 of 20 ( Start time: 09:25:16 AM ) Total Marks: 1 The cost of electricity bill of the factory is treated as:

14 Fixed cost Variable cost.. Step cost Semi variable cost Question # 18 of 20 ( Start time: 09:25:55 AM ) Total Marks: 1 A cost unit is The cost per hour of operating a machine The cost per unit of electricity consumed A unit of product or services in relation to which costs are ascertained... A measure of work output in a standard hour Question # 19 of 20 ( Start time: 09:26:04 AM ) Total Marks: 1 Amount of net purchase can be calculated as follow Purchase of direct material add trade discount less purchase return add carriage inward less other material handling cost Purchase of direct material less trade discount l add purchase return add carriage inward less other material handling cost Purchase of direct material less trade discount less purchase return less carriage inward add other material handling cost Purchase of direct material less trade discount less purchase return add carriage inward add other material handling cost... Question # 20 of 20 ( Start time: 09:26:23 AM ) Total Marks: 1 According to IASB framework, Financial statements exhibit to its users the: Financial position Financial performance Cash inflow and outflow analysis All of the given options... Question # 2 of 20 ( Start time: 04:19:35 PM ) Total Marks: 1 If opening inventory of material is Rs.20,000 and closing inventory is Rs. 40,000.the Average inventory amount will be: Rs. 40,000 Rs. 30, Rs. 20,000 Rs. 10,000

15 / 2 = 30,000 Question # 3 of 20 ( Start time: 04:20:06 PM ) Total Marks: 1 Which of the following cost is used in the calculation of cost per unit? Total production cost Cost of goods available for sales Cost of goods manufactured...pg36 Cost of goods Sold Cost of goods manufactured / Number of units manufactured = cost per unit Question # 4 of 20 ( Start time: 04:21:07 PM ) Total Marks: 1 Opportunity cost is the best example of: Sunk Cost Standard Cost Relevant Cost... Irrelevant Cost Question # 5 of 20 ( Start time: 04:22:21 PM ) Total Marks: 1 Period costs are Expensed when the product is sold Included in the cost of goods sold Related to specific Period... Not expensed Question # 6 of 20 ( Start time: 04:22:58 PM ) Total Marks: 1 Amount of net purchase can be calculated as follow Purchase of direct material add trade discount less purchase return add carriage inward less other material handling cost Purchase of direct material less trade discount l add purchase return add carriage inward less other material handling cost Purchase of direct material less trade discount less purchase return less carriage inward add other material handling cost Purchase of direct material less trade discount less purchase return add carriage inward add other material handling cost... Question # 7 of 20 ( Start time: 04:23:15 PM ) Total Marks: 1

16 Alpha company purchased a machine worth Rs 200,000 in the last year.now that machine can be use in a new project which company has received this year. Now the cost of that machine is to be called: Project cost Sunk cost. Opportunity cost Relevant cost Question # 8 of 20 ( Start time: 04:23:59 PM ) Total Marks: 1 Net sales = Sales less: Sales returns Sales discounts Sales returns & allowances Sales returns & allowances and sales discounts... Question # 9 of 20 ( Start time: 04:24:20 PM ) Total Marks: 1 Which of the following is correct? Units sold=opening finished goods units + Units produced Closing finished goods units... Units Sold = Units produced + Closing finished goods units - Opening finished goods units Units sold = Sales + Average units of finished goods inventory Units sold = Sales - Average units of finished goods inventory Question # 10 of 20 ( Start time: 04:25:28 PM ) Total Marks: 1 Manufacturing entities classified the inventory in which of three kinds? Material inventory,wip inventory,finished goods inventory... Material inventory,purchased good inventory,wip inventory Material inventory,purchased good inventory,finished goods inventory WIP inventory,finished goods inventory,purchased good inventory Question # 11 of 20 ( Start time: 04:25:41 PM ) Total Marks: 1 Cost of goods sold can be calculated as follow

17 Cost of goods manufactured... Add Opening finished goods inventory... Less Closing finished goods inventory... Cost of goods manufactured Less Opening finished goods inventory Less Closing finished goods inventory Cost of goods manufactured Less Opening finished goods inventory Add Closing finished goods inventory Cost of goods manufactured Add Opening finished goods inventory Add Closing finished goods inventory Question # 12 of 20 ( Start time: 04:26:10 PM ) Total Marks: 1 Which of the following is not true Managerial accounting information is prepared for internal users Preparation of Managerial accounting information is not a legal requirement... There are specific standards of acceptability for managerial accounting The structure of managerial accounting practice is relatively flexible Question # 13 of 20 ( Start time: 04:26:43 PM ) Total Marks: 1 All Indirect cost is charged/record in the head of Prime cost FOH cost... Direct labor cost None of the given options Question # 14 of 20 ( Start time: 04:26:58 PM ) Total Marks: 1 Which of the following is indirect cost? The depreciation of machinery The overtime premium incurred at the specific request of a customer The hire of tools for a specific job All of the given options. Question # 15 of 20 ( Start time: 04:27:24 PM ) Total Marks: 1 Which of the following would be considered to be an investment centre?

18 Managers have control over marketing Management have a sales team Management have a sales team and are given a credit control function Managers can purchase capital assets and are given a credit control function... Question # 16 of 20 ( Start time: 04:28:13 PM ) Total Marks: 1 The main difference between the profit center and investment center is: Decision making... Revenue generation Cost incurrence Investment Question # 17 of 20 ( Start time: 04:28:32 PM ) Total Marks: 1 Costs which are constant for a relevant range of activity and rise to new constant level once that range exceeded is called: A fixed cost A variable cost A mixed cost A step fixed cost. Question # 18 of 20 ( Start time: 04:28:48 PM ) Total Marks: 1 Cost accounting department prepares that helps the in preparing final accounts. Cost sheets Cost of goods sold statement... Cost of production Report Material requisition form Question # 19 of 20 ( Start time: 04:29:15 PM ) Total Marks: 1 If, Gross profit = Rs. 40,000 GP Margin = 25% of sales What will be the value of cost of goods sold? Rs. 160,000 Rs. 120,000 Rs. 40,000 Can not be determined

19 Question # 20 of 20 ( Start time: 04:30:01 PM ) Total Marks: 1 Direct material opening inventory add net purchases is called Material consumed Material available for use... Total material purchsed Material ending inventory Mgt402 2 nd online quiz solved by Fahid Mehmoodn 11/12/13 1. fajar fatima Question # 1 of 20 ( Start time: 05:07:15 PM ) Total Marks: 1 In order to ensure efficient functioning of the stores department and steady flow of materials to the production departments, the restocking of stores is duty of: Managers Storekeeper...49 Production In charge Sales supervisor One important duty of a storekeeper is the restocking of stores in order to ensure efficient functioning of the stores department and steady flow of materials to the production department Question # 2 of 20 ( Start time: 05:08:35 PM ) Total Marks: 1 Loss by fire is an example of: Normal Loss Abnormal Loss... Incremental Loss Can not be determined Question # 3 of 20 ( Start time: 05:08:58 PM ) Total Marks: 1 The Term Mimimum Level Represents. This represents the quantity below which the stock of any item should not be allowed to fall...52 This represents the quantity below which the stock of any item should be allowed to fall This is the estimated time period in number of days or in weeks or in months.

20 This is the Lead time period in number of days or in weeks or in months. Minimum Level; This represents the quantity below which the stock of any item should not be allowed to fall Question # 4 of 20 ( Start time: 05:10:19 PM ) Total Marks: 1 Gross pay includes which of the following items? Basic pay + bonus pay Overtime payment + shift allowances Rent and conveyance allowances All of the given options... Question # 5 of 20 ( Start time: 05:10:30 PM ) Total Marks: 1 The Term Maximum Level Represents: The maximum stock level indicates the maximum quantity of an item of material which can be held in stock at any time The maximum stock level indicates the maximum quantity of an item of material which cannot be held in stock at any time. The Average stock level indicates the maximum quantity of an item of material which can be held in stock at any time. The Available stock level indicates the maximum quantity of an item of material which can be held in stock at any time. Maximum Stock Level The maximum stock level indicates the maximum quantity of an item of material which can be held in stock at any time. Question # 6 of 20 ( Start time: 05:11:19 PM ) Total Marks: 1 Buyer produced 20,000 units and their total factory cost was Rs. 450,000,other cost like property tax on factory bulding was Rs. 10,000 included in that cost till year ended the cost of per unit would be: Rs (450,000 / 20,000=22.5) Rs.23.5 Rs.24.5 Rs.26.5 Question # 7 of 20 ( Start time: 05:12:40 PM ) Total Marks: 1

21 Which of the following is considered as basic systems of remunerating labor? Time rate system Piece rate system Halsey Premium plan Both time rate and piece rate system...pg12 So there are two basic systems of remunerating labor. One is related to the time and the other relates to the quantum of work. Question # 8 of 20 ( Start time: 05:13:42 PM ) Total Marks: 1 An organistation sold units 4000 and have closing finished goods 3500 units and opening finished goods units were 1000.The quantity of unit produced would be: 7500 units 6500 units... sure 4500 units 8500 units X = 4000 X= =6500 units Question # 9 of 20 (Start time: 05:15:00 PM ) Total Marks: 1 Net Income before Interest and tax is also called: Operating Income/Profit... Gross Profit Marginal Income Other Income Question # 10 of 20 ( Start time: 05:15:52 PM ) Total Marks: 1 Which of the following items of expense are to be add in FOH cost Rent of factory + Head office rent + salaries to factory watchman Rent of factory + factory lighting bill + Directors salaries Rent of factory + factory lighting bill + Factory employees salaries... Head office rent + Factory property tax + Factory small tools Question # 11 of 20 ( Start time: 05:16:37 PM ) Total Marks: 1 Which of the following is not true Managerial accounting information is prepared for internal users

22 Preparation of Managerial accounting information is not a legal requirement... There are specific standards of acceptability for managerial accounting The structure of managerial accounting practice is relatively flexible Question # 12 of 20 ( Start time: 05:17:17 PM ) Total Marks: 1 Which of the following is NOT true about job order cost sheets? Job cost sheets contain direct material costs Job cost sheets contain actual amounts of factory overhead... Job cost sheet does not contain conversion cost? Job cost sheets contain direct labor costs Question # 13 of 20 ( Start time: 05:18:47 PM ) Total Marks: 1 Which of the following statements concerning job order costing systems is incorrect? Cost drivers are those items which cause actual overhead to exceed applied overhead Job order costing systems are appropriate to both manufacturing and service businesses Traditionally, direct labor has been a very popular overhead application base In a service business, indirect costs of providing a service are treated as overhead and applied in a manner similar to that for factory overhead Cost Driver is defined as a measure of activity the magnitude of which influences if magnitude of cost of relevant cost objectives. In other words Factory overhead application base should be a measure of activity which has causal relation with incurrence of factory overhead. Question # 14 of 20 ( Start time: 05:20:08 PM ) Total Marks: 1 Store incharge after receiving the material as per the goods received note, places the material at its location and makes an entry in. Bin Card...65 Store Ledger Card Stock Ledger None of the given options Bin Card Store incharge after receiving the material as per the goods received note, places the material at its location and makes an entry in the bin card. Question # 15 of 20 ( Start time: 05:20:55 PM ) Total Marks: 1 Increase in material Inventory means: The ending inventory is greater than opening inventory...34 The ending inventory is less than opening inventory

23 Both ending and opening inventories are equal Can not be determined Increase in inventory means closing inventory is greater than the opening inventory Question # 16 of 20 ( Start time: 05:22:16 PM ) Total Marks: 1 If, Gross profit = Rs. 40,000 GP Margin = 25% of sales What will be the value of cost of goods sold? Rs. 160,000 Rs. 120, Rs. 40,000 Can not be determined Question # 17 of 20 ( Start time: 05:22:50 PM ) Total Marks: 1 While calculating the EOQ, number of orders is calculated by: Multiplying the required units with cost per order Dividing required unit by ordered quantity...pg57 Multiplying the required units with ordered quantity Multiplying the ordered quantity with cost per order Required Units/ Order Quantity = Number of orders Question # 18 of 20 ( Start time: 05:24:11 PM ) Total Marks: 1 Cost accounting concepts include all of the following EXCEPT: Planning Controlling Sharing... Costing Question # 19 of 20 ( Start time: 05:25:02 PM ) Total Marks: 1 High labor turnover is NOT desirable because: It denotes the instability of the labor force It is an indication of high labor cost It shows frequent changes in the labor force All of the given options...96 Labor Turnover: Labor turnover may be defined as the rate of change in the composition of the labor force of an organisation high rate of labor turnover denotes that labor is not stable

24 and there is frequent change in the labor force in the organisation. The high labor turnover rate is an important indication of high labor cost. It is therefore not desirable. Question # 20 of 20 ( Start time: 05:26:02 PM ) Total Marks: 1 FOH applied rate of Rs per machine hour. During the year the FOH to Rs.275,000 and 48,000 machine hours were used. Which one of following statement is correct? Overhead was under-applied by Rs.6, Overhead was over-applied by Rs.6,200 Overhead was under-applied by Rs.7,200 Overhead was over-applied by Rs.7, * = Fahid Mehmood Question # 1 of 20 ( Start time: 05:32:33 PM ) Total Marks: 1 In which of the following center FOH cost NOT incurred Production Center Service Center General Cost Center Head Office... Question # 2 of 20 ( Start time: 05:33:33 PM ) Total Marks: 1 If a predetermined FOH rate is not applied and the volume of production is reduced from the planned capacity level, the cost per unit expected to: Remain unchanged for fixed cost and increase for variable cost Increase for fixed cost and remain unchanged for variable cost... Increase for fixed cost and decrease for variable cost Decrease for both fixed and variable costs Question # 3 of 20 ( Start time: 05:34:48 PM ) Total Marks: 1 The cost of goods sold was Rs. 240,000. Beginning and ending inventory balances were Rs. 20,000 and Rs. 30,000, respectively. What was the inventory turnover? 8.0 times 12.0 times 7.0 times

25 9.6 times...32 Inventory turnover ratio Inventory turnover ratio = Cost of goods sold / Average inventory avg inventry = 20, ,000 =50000/2 = 25, ,000 / 25,000 = 9.6 times Question # 4 of 20 ( Start time: 05:36:14 PM ) Total Marks: 1 The Process of cost apportionment is carried out so that: Cost may be controlled Cost unit gather overheads as they pass through cost centers Whole items of cost can be charged to cost centers Common costs are shared among cost centers... Question # 5 of 20 ( Start time: 05:37:36 PM ) Total Marks: 1 Manufacturing entities classified the inventory in which of three kinds? Material inventory,wip inventory,finished goods inventory... Material inventory,purchased good inventory,wip inventory Material inventory,purchased good inventory,finished goods inventory WIP inventory,finished goods inventory,purchased good inventory Question # 6 of 20 ( Start time: 05:37:53 PM ) Total Marks: 1 Under Periodic Inventory system Purchase of inventory is treated as: Assets Expense...41 Income Liability Question # 7 of 20 ( Start time: 05:39:03 PM ) Total Marks: 1 Of the following manufacturing operations, which is the best suited to the utilization of a job order system? Soft drink bottling operation Crude oil refining Plastic molding operation.. Cement Production

26 Question # 8 of 20 ( Start time: 05:40:31 PM ) Total Marks: 1 A store ledger card is similar to the. Stock ledger Bin card...65 Material card Purchase requsition card It is similar to the bin card Question # 9 of 20 ( Start time: 05:41:52 PM ) Total Marks: 1 High labor turnover is NOT desirable because: It denotes the instability of the labor force It is an indication of high labor cost It shows frequent changes in the labor force All of the given options... Question # 10 of 20 ( Start time: 05:42:06 PM ) Total Marks: 1 Overtime that is necessary in order to fulfill customer orders is called: Avoidable overtime Unavoidable overtime...85 Premium Overtime Flex time Overtime that is necessary in order to fulfill customer orders is unavoidable overtime. Question # 11 of 20 ( Start time: 05:42:55 PM ) Total Marks: 1 The cost of electricity bill of the factory is treated as: Fixed cost Variable cost... Step cost Semi variable cost Question # 12 of 20 ( Start time: 05:44:17 PM ) Total Marks: 1 FOH applied rate of Rs per machine hour. During the year the FOH to Rs.275,000 and 48,000 machine hours were used. Which one of following statement is correct?

27 Overhead was under-applied by Rs.6, Overhead was over-applied by Rs.6,200 Overhead was under-applied by Rs.7,200 Overhead was over-applied by Rs.7, * 48,000 = Under/Over applied FOH cost Applied FOH Cost -Actual FOH Cost = under applied FOH cost = under Question # 13 of 20 ( Start time: 05:45:34 PM ) Total Marks: 1 Which of the following is true for total factory cost? Total factory cost = prime cost + FOH...2 Total factory cost = prime cost + conversion cost + FOH Total factory cost = conversion cost + FOH Total factory cost = prime cost + conversion cost Prime Cost +Factory overhead cost= Total production cost. Question # 14 of 20 ( Start time: 05:46:53 PM ) Total Marks: 1 A method by which the good used are priced out at average cost is known as: BCVO AVCO... c.fifo LIFO Question # 15 of 20 ( Start time: 05:47:26 PM ) Total Marks: 1 Where the applied FOH cost is less than the actual FOH cost it is: Unfavorable variance... Favorable variance Normal variance Budgeted variance Question # 16 of 20 ( Start time: 05:47:46 PM ) Total Marks: 1 A standard rate is paid to the employee when he completed his job: In time less than the standard In standard time

28 In time more than standard Both in standard time and more than the standard time... Question # 17 of 20 ( Start time: 05:48:57 PM ) Total Marks: 1 Which of the following best describes the manufacturing costs? Direct materials, direct labor and factory overhead... Direct materials and direct labor Direct materials, direct labor, factory overhead, and administrative overhead Direct labor and factory overhead Question # 18 of 20 ( Start time: 05:50:23 PM ) Total Marks: 1 What will be the impact of normal loss on the overall per unit cost? Per unit cost will increase... Per unit cost will decrease Per unit cost remain unchanged Normal loss has no relation to unit cost Question # 19 of 20 ( Start time: 05:51:16 PM ) Total Marks: 1 is the time worked over and above the employee's basic working week. Flex time Overtime...84 Shift allowance Commission Overtime is the time worked over and above the employee's basic working week. Overtime must not be confused with flex-time. Ina flex-time system an employee is allowed to work extra hours earlier in the week or month, in return for which he will work fewer hours later on. His overall number of hours worked remains constant Question # 20 of 20 ( Start time: 05:52:19 PM ) Total Marks: 1 Cost accounting concepts include all of the following EXCEPT: Planning Controlling Sharing... Costing

29 3. amna Question # 1 of 20 ( Start time: 06:09:37 PM ) Total Marks: 1 Which of the following statement measures the financial position of the entity on particular time? Income Statement Balance Sheet...15 Cash Flow Statement Statement of Retained Earning Balance Sheet: Statement of financial position at a given point in time. Question # 2 of 20 ( Start time: 06:10:32 PM ) Total Marks: 1 From employer point of view, the total cost of wages and salaries is a combination of which of the following? Gross wages and salaries+employer's provident fund contributions...75 Gross wages and salaries+employee's provident fund contributions Gross wages and salaries + Income Tax deductions Gross wages and salaries + pension scheme payments To an employer, the total cost of wages and salaries is therefore: Gross wages and salaries, plus Employer's provident fund contributions. Question # 3 of 20 ( Start time: 06:11:54 PM ) Total Marks: 1 Which of the following best describes piece rate system? The increased volume of production results in decreased cost of production.. The increased volume of production in minimum time Establishment of fair standard rates Higher output is a result of efficient management.?? Question # 4 of 20 ( Start time: 06:13:16 PM ) Total Marks: 1 A cost centre is A unit of product or service in relation to which costs are ascertained An amount of expenidure attributable to an activity A production or service location,function,activity or item of equipment for which costs are accumulated... A centre for which an indvidual budget is drawn up

30 Question # 5 of 20 ( Start time: 06:14:36 PM ) Total Marks: 1 FOH absorption rate is calculated by the way of Estimated FOH Cost/Direct labor hours Estimated FOH Cost/No of units produced Estimated FOH Cost/Prime Cost All of the given options OAR = Estimated F.O.H cost/base Bases for FOH Absorption Rate Following can be used as base to calculate overhead absorption rate: 1. Direct Labor hours 2. Machine hours 3. No. of unit produced 4. Direct labor cost 5. Prime cost Question # 6 of 20 ( Start time: 06:15:57 PM ) Total Marks: 1 The main difference between the profit center and investment center is: Decision making... Revenue generation Cost incurrence Investment Question # 7 of 20 ( Start time: 06:16:18 PM ) Total Marks: 1 An organistation sold units 4000 and have closing finished goods 3500 units and opening finished goods units were 1000.The quantity of unit produced would be: 7500 units 6500 units units 8500 units? = 4000 Question # 8 of 20 ( Start time: 06:16:44 PM ) Total Marks: 1 If, Sales = Rs. 800,000 appli Markup = 25% of cost What would be the value of Gross profit?

31 Rs. 200,000 Rs. 160, Rs. 480,000 Rs. 640,000 Question # 9 of 20 ( Start time: 06:18:02 PM ) Total Marks: 1 Loss by fire is an example of: Normal Loss Abnormal Loss... Incremental Loss Can not be determined Question # 10 of 20 ( Start time: 06:19:03 PM ) Total Marks: 1 Which of the following cost has both features fixed and variable? Step fixed cost Fixed cost Variable cost Semi variable cost...4 It is also known as mixed cost. It is the cost which ispart fixed and par variable. Question # 11 of 20 ( Start time: 06:20:18 PM ) Total Marks: 1 A standard rate is paid to the employee when he completed his job: In time less than the standard In standard time In time more than standard Both in standard time and more than the standard time... Question # 12 of 20 ( Start time: 06:20:29 PM ) Total Marks: 1 The Inventory Turn over ration is 5 times and numbers of days in a year is 365.Inventory holding period in days would be 100 days 73 days... (365/ 5 = 73) 50 days 10 days

32 Question # 13 of 20 ( Start time: 06:21:13 PM ) Total Marks: 1 Which of the following is true when piece rate system is used for wage determination? worker is paid on the basis of time taken by him to perform the work worker is paid on the basis of production... Piece rate system is more beneficial than a guaranteed minimum wage system None of the given options Question # 14 of 20 ( Start time: 06:22:13 PM ) Total Marks: 1 Which of the following is / are element / s of production payroll? Direct labor force wages Administrative wages Selling wages All of the given options... Question # 15 of 20 ( Start time: 06:22:45 PM ) Total Marks: 1 Which of the following cannot be used as a base for the determination of overhead absorption rate? Number of units produced Prime cost Conversion cost Discount Allowed... Question # 16 of 20 ( Start time: 06:23:50 PM ) Total Marks: 1 Alpha company purchased a machine worth Rs 200,000 in the last year.now that machine can be use in a new project which company has received this year. Now the cost of that machine is to be called: Project cost Sunk cost... Opportunity cost Relevant cost Question # 17 of 20 ( Start time: 06:24:40 PM ) Total Marks: 1 Merrick Differential Piece Rate System: worker is not penalized even if his performance does not exceed 80 per cent of the High Task worker is not penalized even if his performance does not exceed 70 per cent of the High Task.

33 worker is not penalized even if his performance does not exceed 50 per cent of the High Task. worker is not penalized even if his performance does not exceed 30 per cent of the High Task. Merrick differential piece rate system: Under this system the worker is not penalized even if his performance does not exceed 80 per cent of the High Task. Question # 18 of 20 ( Start time: 06:26:05 PM ) Total Marks: 1 A Blanket Rate is: A single rate which used throughout the organisation departments A double rates which used throughout the organisation departments A single rates which used in different departments of the organisation None of the given options Blanket rates A blanket absorption rate is a single rate of absorption used throughout an organization s production facility and based upon its total production costs and activity Question # 19 of 20 ( Start time: 06:27:33 PM ) Total Marks: 1 The Term Minimum Level Represents. This represents the quantity below which the stock of any item should not be allowed to fall... This represents the quantity below which the stock of any item should be allowed to fall This is the estimated time period in number of days or in weeks or in months. This is the Lead time period in number of days or in weeks or in months. Question # 20 of 20 ( Start time: 06:28:09 PM ) Total Marks: 1 High labor turnover is NOT desirable because: It denotes the instability of the labor force It is an indication of high labor cost It shows frequent changes in the labor force All of the given options... 3 rd quiz solved by Fahid Mehmood

34 Question # 1 of 20 ( Start time: 03:42:11 PM ) Total Marks: 1 Which of the following is called Non Statutory deductions: Subscriptions to a trade union Contributions by the employee to a pension scheme Advance Salary All of the given...75 Question # 2 of 20 ( Start time: 03:43:18 PM ) Total Marks: 1 Which one of the following factors would cause budgeted revenue to be less than the expected demand? Excess capacity exists Abundant resources are available Demand exceeds capacity... Excess supply of labor exists Question # 3 of 20 ( Start time: 03:43:59 PM ) Total Marks: 1 Cost of finished goods inventory is calculated by: Multiplying units of finished goods inventory with the cost per unit... Dividing units of finished goods inventory with the cost per unit Dividing per unit cost with finished goods inventory Deducting total cost from finished goods inventory Question # 4 of 20 ( Start time: 03:44:40 PM ) Total Marks: 1 What will be the impact of normal loss on the overall per unit cost? Per unit cost will increase... Per unit cost will decrease Per unit cost remain unchanged Normal loss has no relation to unit cost Question # 5 of 20 ( Start time: 03:45:14 PM ) Total Marks: 1 Which of the following element must be taken into account while calculating total earnings of a worker under different incentive wage schemes? Rate per unit Units of production... Number of workers employed All of the given options

35 Question # 6 of 20 ( Start time: 03:45:40 PM ) Total Marks: 1 When closing stock is over valuate, what would its effect be on profit? It will Increase the profit... It will decrease the profit No effect on profit Cannot be determined Question # 7 of 20 ( Start time: 03:46:17 PM ) Total Marks: 1 The point at which the cost line intersects the sales line will be called: Budgeted sales Break Even sales. Margin of safety Contribution margin Question # 8 of 20 ( Start time: 03:47:06 PM ) Total Marks: 1 Which of the following is true of the budgeting process? The cash budget has an effect on all operating budgets Operating budgets must be prepared before the cash budget can be prepared Financial budgets must be prepared before operating budgets can be prepared Budgets can be prepared in any order as long as they are all completed... Question # 9 of 20 ( Start time: 03:48:31 PM ) Total Marks: 1 Which of the following is to be called product cost Material cost Labor cost FOH cost All of the given options... Question # 10 of 20 ( Start time: 03:49:07 PM ) Total Marks: 1 PVC company has ordering quantity 10,000 units.they have storage capacity 20,000 units,the average ordering quantity would be: 20,000 5, ,000 25,000

36 Question # 11 of 20 ( Start time: 03:50:38 PM ) Total Marks: 1 Which of the following is a point of differentiation between blanket rates and department rates? Blanket rate is a single overhead rate established for the entire factory, while Department rates are separate overhead rates for all departments of factory through which the products pass??? Blanket rate is a single overhead rate established for the entire factory Department rates are separate overhead rates for all departments of factory through which the products pass Blanket rates are separate overhead rates for all departments of factory through which the product passes Question # 12 of 20 ( Start time: 03:52:07 PM ) Total Marks: 1 Closing work in process Inventory of last year: Is treated as Opening inventory for current year... Is not carried forward to next year Become expense in the next year Charge to Profit & Loss account Question # 13 of 20 ( Start time: 03:52:30 PM ) Total Marks: 1 If a predetermined FOH rate is not applied and the volume of production is reduced from the planned capacity level, the cost per unit expected to: Remain unchanged for fixed cost and increase for variable cost Increase for fixed cost and remain unchanged for variable cost... Increase for fixed cost and decrease for variable cost Decrease for both fixed and variable costs Question # 14 of 20 ( Start time: 03:53:05 PM ) Total Marks: 1 Which of the following is indirect cost? The depreciation of machinery The overtime premium incurred at the specific request of a customer The hire of tools for a specific job All of the given options... Question # 15 of 20 ( Start time: 03:53:34 PM ) Total Marks: 1 Which of the following cannot be used as a base for the determination of overhead absorption rate?

37 Number of units produced Prime cost Conversion cost Discount Allowed... Question # 16 of 20 ( Start time: 03:54:17 PM ) Total Marks: 1 While transporting petrol, a little quantity will be evaporated; such kind of loss is termed as: Normal Loss... Abnormal Loss It is incremental loss It can not be abnormal loss Question # 17 of 20 ( Start time: 03:55:08 PM ) Total Marks: 1 An assumption of CVP analysis is that a change in total costs is caused because of a change in which of the following factor? Direct labor cost The number of units sold...? Sales commission per unit Direct material cost Question # 18 of 20 ( Start time: 03:56:39 PM ) Total Marks: 1 Which of the following statements concerning job order costing systems is incorrect? Cost drivers are those items which cause actual overhead to exceed applied overhead Job order costing systems are appropriate to both manufacturing and service businesses Traditionally, direct labor has been a very popular overhead application base In a service business, indirect costs of providing a service are treated as overhead and applied in a manner similar to that for factory overhead Cost Driver is defined as a measure of activity the magnitude of which influences if magnitude of cost of relevant cost objectives. In other words Factory overhead application base should be a measure of activity which has causal relation with incurrence of factory overhead Question # 19 of 20 ( Start time: 03:57:36 PM ) Total Marks: 1 Where the applied FOH cost is greater than the actual FOH cost it is:

38 Unfavorable variance Favorable variance...24 Normal variance Budgeted variance Where the applied cost is greater than the actual cost it is favorable variance, but where the applied cost is lesser than the actual cost it is unfavorable variance. Question # 20 of 20 ( Start time: 03:58:17 PM ) Total Marks: 1 From employer point of view, the total cost of wages and salaries is a combination of which of the following? Gross wages and salaries+employer's provident fund contributions... Gross wages and salaries+employee's provident fund contributions Gross wages and salaries + Income Tax deductions Gross wages and salaries + pension scheme payments Question # 1 of 20 ( Start time: 04:01:01 PM ) Total Marks: 1 Which of the following is a mechanical device to record the exact time of the workers? Clock Card...71 Store Card Token System Attendance Register Mechanical Methods Different mechanical devices have been designed for recording the exact time of the workers. These include: a. Clock Card b. Dial Time Records. Question # 2 of 20 ( Start time: 04:02:16 PM ) Total Marks: 1 While calculating the EOQ, number of orders is calculated by: Multiplying the required units with cost per order Dividing required unit by ordered quantity...57 Multiplying the required units with ordered quantity Multiplying the ordered quantity with cost per order Required Units/ Order Quantity = Number of orders

Which of the following is correct? Select correct option: Units sold=opening finished goods units + Units produced Closing finished goods units Units

Which of the following is correct? Select correct option: Units sold=opening finished goods units + Units produced Closing finished goods units Units Which of the following is correct? Units sold=opening finished goods units + Units produced Closing finished goods units Units Sold = Units produced + Closing finished goods units - Opening finished goods

More information

Of the following manufacturing operations, which is the best suited to the utilization of a job order system?

Of the following manufacturing operations, which is the best suited to the utilization of a job order system? Current Quiz MGT 402 Solved by Atif Ghafoor For more help contact with at (ofakatif@yahoo.com) Page 1 Of the following manufacturing operations, which is the best suited to the utilization of a job order

More information

1). Fixed cost per unit decreases when:

1). Fixed cost per unit decreases when: 1). Fixed cost per unit decreases when: a. Production volume increases. b. Production volume decreases. c. Variable cost per unit decreases. d. Variable cost per unit increases. 2). Prime cost + Factory

More information

ANIL SHARMA S CLASSES

ANIL SHARMA S CLASSES ANIL SHARMA S CLASSES {Marks: 100} (COSTING PAPER-FULL) {Time: 3 Hours} ----------------------------------------------------------------------------------------------------- Q-1: What is meant by cost

More information

Cost Accounting. Multiple Choice Questions:

Cost Accounting. Multiple Choice Questions: Multiple Choice Questions: 1- The Value Chain a- Involves external companies as well as internal activities. b- Is the sequence of business functions in which customer usefulness is added to products or

More information

Chapter 3. Accounting for Labor

Chapter 3. Accounting for Labor Chapter 3 Accounting for Labor Learning Objectives LO1 Distinguish between features of hourly rate and piece-rate plans. LO2 Specify procedures for controlling labor costs. LO3 Account for labor costs

More information

The following are all product costs except: a. Direct materials b. Factory overhead c. Direct labor d. Sales and administrative expenses

The following are all product costs except: a. Direct materials b. Factory overhead c. Direct labor d. Sales and administrative expenses 1 MULTIPLE CHOICE 1-2 I certify that I am taking this assessment alone and that I am receiving no help with it except through the use of my textbook and notes. I have not been given the questions in advance.

More information

1. Cost accounting involves the measuring, recording, and reporting of: A. product costs. B. future costs. C. manufacturing processes.

1. Cost accounting involves the measuring, recording, and reporting of: A. product costs. B. future costs. C. manufacturing processes. 1. Cost accounting involves the measuring, recording, and reporting of: A. product costs. B. future costs. C. manufacturing processes. D. managerial accounting decisions. 2. In accumulating raw materials

More information

2. Standard costs imply a) Predetermined cost for a period b) Incurred cost c) Conversion cost d) Incremental cost

2. Standard costs imply a) Predetermined cost for a period b) Incurred cost c) Conversion cost d) Incremental cost QUESTION BANK PAPER: COST ACCOUNTING COURSE: B.Com (Semester IV) MCQs 1. The basic objective of cost accounting is a) Recording of cost b) Reporting of cost c) Cost control d) EarningProfit 2. Standard

More information

Section A: Summary Content Notes

Section A: Summary Content Notes COST ACCOUNTING 30 JULY 2015 Section A: Summary Content Notes MANUFACTURING ACCOUNTS: NEW LEDGER ACCOUNTS New Ledger Accounts pertaining to manufacturing concerns are divided into the following categories:

More information

Chapter 02 - Cost Concepts and Cost Allocation

Chapter 02 - Cost Concepts and Cost Allocation Chapter 02 - Cost Concepts and Cost Allocation Student: 1. Product costs for a manufacturing company consist of direct materials, direct labor, and overhead. 2. Period cost and product cost are synonymous

More information

Financial Accounting and Auditing Paper-III Financial Accounting

Financial Accounting and Auditing Paper-III Financial Accounting Revised Syllabus of the Courses of B.Com. Programme at T.Y.B.Com. with Effect from the Academic Year 2015-2016 for IDOL Students Financial Accounting and Auditing Paper-III Financial Accounting SECTION

More information

JOB COSTING AND OVERHEAD

JOB COSTING AND OVERHEAD JOB COSTING AND OVERHEAD Key Topics to Know Differences and similarities between job order and process costing Key document is the Job Cost Sheet Flow of product costs through inventory accounts to cost

More information

Paper T4. Accounting for Costs. Thursday 10 December Certified Accounting Technician Examination Intermediate Level

Paper T4. Accounting for Costs. Thursday 10 December Certified Accounting Technician Examination Intermediate Level Certified Accounting Technician Examination Intermediate Level Accounting for Costs Thursday 10 December 2009 Time allowed: 2 hours This paper is divided into two sections: Section A ALL 20 questions are

More information

COST C O S T COST. Cost is not a simple concept. It is important to distinguish between four different types - fixed,, variable, average and marginal.

COST C O S T COST. Cost is not a simple concept. It is important to distinguish between four different types - fixed,, variable, average and marginal. Ir. Haery Sihombing/IP Pensyarah Fakulti Kejuruteraan Pembuatan Universiti Teknologi Malaysia Melaka Chapter 3 DIRECT COST Chapter 4 INDIRECT COSTS C O S T COST Cost is not a simple concept. It is important

More information

DEEPAK GUPTA CLASSES

DEEPAK GUPTA CLASSES COST SHEET Q1. A Ltd. has a capacity to produce 100,000 units of the product every month. Its work costs at varying levels of production is as under: LEVEL WORK COST (Rs.per unit) 10% 400 20% 390 30% 380

More information

B.Com II Year (Hons.) Cost Accounting Model Paper I

B.Com II Year (Hons.) Cost Accounting Model Paper I Max. Marks: 100 B.Com II Year (Hons.) Cost Accounting Model Paper I Durations: 3 Hrs. Attempt all the questions. All Questions are compulsory, each question carry 20 marks. Unit I 1. A Ltd. Is the manufacturer

More information

Part 1 Study Unit 5. Cost Accumulations Systems Jim Clemons, CMA Ronald Schmidt, CMA, CFM

Part 1 Study Unit 5. Cost Accumulations Systems Jim Clemons, CMA Ronald Schmidt, CMA, CFM Part 1 Study Unit 5 Cost Accumulations Systems Jim Clemons, CMA Ronald Schmidt, CMA, CFM 1 Overview Cost accounting systems record manufacturing activities using a perpetual inventory system, which continuously

More information

COST OF GOODS MANUFACTURES B.COM. PART II

COST OF GOODS MANUFACTURES B.COM. PART II COST OF GOODS MANUFACTURES B.COM. PART II Q#1 Following are the balances appear on the Trial Balance of SAMREEN & Co. for the year ended April 30, 1980. Inventory of Goods in Process April, 01 Rs.109,000

More information

Chapter 2. Job Order Costing and Analysis QUESTIONS

Chapter 2. Job Order Costing and Analysis QUESTIONS Chapter 2 Job Order Costing and Analysis QUESTIONS 1. Factory overhead is not identified with specific units (jobs) or batches (job lots). Therefore, to assign costs, estimates of the relation between

More information

An Introduction to Cost Terms and Purposes

An Introduction to Cost Terms and Purposes CHAPTER 2 An Introduction to Cost Terms and Purposes Overview This chapter introduces the basic terminology of cost accounting. Communication among managers and management accountants is greatly facilitated

More information

Cost Behavior. Material Cost: Direct material: 1. seen in the final product 2. economic/visible to trace Indirect Material:

Cost Behavior. Material Cost: Direct material: 1. seen in the final product 2. economic/visible to trace Indirect Material: 1 Chapter 2 Introduction to Cost Terms and Purposes Cost A cost is the value of economic resources (e.g., money) sacrificed or used up to achieve a particular objective (e.g., produce a product or perform

More information

MARGINAL COSTING CATEGORY A CHAPTER HIGH MARKS COVERAGE IN EXAM

MARGINAL COSTING CATEGORY A CHAPTER HIGH MARKS COVERAGE IN EXAM 1 MARGINAL COSTING CATEGORY A CHAPTER HIGH MARKS COVERAGE IN EXAM Question 1 Arnav Ltd. manufacture and sales its product R-9. The following figures have been collected from cost records of last year for

More information

B.COM 2 PRIVATE COST ACCOUNTING. B.com-2 PRIVATE Annual Examination COMPILED & SOLVED BY: Jahangeer Khan

B.COM 2 PRIVATE COST ACCOUNTING. B.com-2 PRIVATE Annual Examination COMPILED & SOLVED BY: Jahangeer Khan B.COM 2 PRIVATE COST ACCOUNTING B.com-2 PRIVATE Annual Examination 20 COMPILED & SOLVED BY: Jahangeer Khan 20 Q.1: MANUFACTURING CONCERN: Consider the following information taken from the books of SAHAB

More information

Test Bank For Cost Accounting A Managerial Emphasis Fifth Canadian 5th Edition By Horngren Foster Datar And Gowing

Test Bank For Cost Accounting A Managerial Emphasis Fifth Canadian 5th Edition By Horngren Foster Datar And Gowing Test Bank For Cost Accounting A Managerial Emphasis Fifth Canadian 5th Edition By Horngren Foster Datar And Gowing Link full download: https://digitalcontentmarket.org/download/test-bank-for-cost-accounting-amanagerial-emphasis-fifth-canadian-5th-edition-by-horngren-foster-datar-andgowing/

More information

INTER CA MAY PAPER 3 : COST AND MANAGEMENT ACCOUTING Branch: Multiple Date: Page 1

INTER CA MAY PAPER 3 : COST AND MANAGEMENT ACCOUTING Branch: Multiple Date: Page 1 INTER CA MAY 2018 PAPER 3 : COST AND MANAGEMENT ACCOUTING Branch: Multiple Date: Note: Question 1 is compulsory. Attempt any five from the rest. Note: All questions are compulsory. Question 1 (5 Marks

More information

COST SHEET. Samir K Mahajan

COST SHEET. Samir K Mahajan COST SHEET Samir K Mahajan COMPONENTS OF TOTAL COST Prime cost: It is the aggregate of direct material cost, direct labour cost and direct expenses. Prime cost or Direct cost = Direct materials + Direct

More information

UNIT 2 : FINAL ACCOUNTS OF MANUFACTURING ENTITIES

UNIT 2 : FINAL ACCOUNTS OF MANUFACTURING ENTITIES 7.63 UNIT 2 : FINAL ACCOUNTS OF MANUFACTURING ENTITIES LEARNING OUTCOMES After studying this unit, you will be able to: Understand the purpose of preparing Manufacturing Account. Learn the items to be

More information

FINANCIAL STATEMENTS

FINANCIAL STATEMENTS FINANCIAL STATEMENTS Key Topics to Know Cost of good sold statement is prepared from the finished goods inventory account. Cost of goods sold statement has the same format as in financial accounting. Cost

More information

NORTH MAHARASHTRA UNIVERSITY, JALGAON (NAAC Re-accredited B Grade {CGPA 2.88})

NORTH MAHARASHTRA UNIVERSITY, JALGAON (NAAC Re-accredited B Grade {CGPA 2.88}) NORTH MAHARASHTRA UNIVERSITY, JALGAON (NAAC Re-accredited B Grade {CGPA 2.88}) FACULTY OF COMMERCE & MANAGEMENT New Syllabus: M.Com (w.e.f. June 2014) SEMESTER : I Specialization Paper : I 104 (B) Advanced

More information

Chapter 2--Cost Terminology and Cost Behaviors

Chapter 2--Cost Terminology and Cost Behaviors Chapter 2--Cost Terminology and Cost Behaviors TRUE/FALSE 1. A cost object is anything for which management wants to collect or accumulate costs. ANS: T PTS: 1 DIF: Easy OBJ: 2-1 2. A production plant

More information

1. The cost of an item is the sacrifice of resources made to acquire it. 2. An expense is a cost charged against revenue in an accounting period.

1. The cost of an item is the sacrifice of resources made to acquire it. 2. An expense is a cost charged against revenue in an accounting period. Chapter 02 Cost Concepts and Behavior True / False Questions 1. The cost of an item is the sacrifice of resources made to acquire it. True False 2. An expense is a cost charged against revenue in an accounting

More information

SECTION I. Sh ,000 10,200 16,680 14,000 2,600 4,200 13,300 2,520 1,600 10,500 12, ,000

SECTION I. Sh ,000 10,200 16,680 14,000 2,600 4,200 13,300 2,520 1,600 10,500 12, ,000 QUESTION ONE SECTION I Wangu Manufacturing Company Ltd. is located at the industrial area in Nairobi. The company uses four different machine groups, A, B, C and D in its manufacturing process. The overhead

More information

Multiple Choice Questions

Multiple Choice Questions Multiple Choice Questions 1. A cost not relevant to deciding whether to purchase a new machine is: a) The cost of the new machine b) Lower maintenance costs for the new machine c) The cost of the old machine

More information

Management Accounting

Management Accounting Management Accounting Suggested Solutions to Practice Questions Professional, Practical, Proven www.accountingtechniciansireland.ie Table of Contents Part 1:... 2 Part 2:... 8 Part 3:... 14 Part 4:...

More information

COST ACCOUNTING b.com part II Regular & Private (SUPPLEMENTARY) Solved Paper. Compiled & Solved by: Sameer Hussain

COST ACCOUNTING b.com part II Regular & Private (SUPPLEMENTARY) Solved Paper. Compiled & Solved by: Sameer Hussain COST ACCOUNTING b.com part II 2014 Regular & Private (SUPPLEMENTARY) Solved Paper Compiled & Solved by: Sameer Hussain Instructions: (1) Attempt any FIVE questions. (2) All questions carry equal marks.

More information

MAC2601 EXAM PACK PAST QUESTIONS AND TUTORIALS GR SOLUTIONS

MAC2601 EXAM PACK PAST QUESTIONS AND TUTORIALS GR SOLUTIONS MAC2601 EXAM PACK PAST QUESTIONS AND GR TUTORIALS SOLUTIONS email: info@grtutorials.co.za Tel: 0127704239 MAC REVISION STUDY PACK TOPIC 1: NATURE AND BEHAVIOUR OF COSTS (1) Manufacturing cost/ Production

More information

FFQA 1. Complied by: Mohammad Faizan Farooq Qadri Attari ACCA (Finalist) Contact:

FFQA 1. Complied by: Mohammad Faizan Farooq Qadri Attari ACCA (Finalist)  Contact: FFQA 1 Objective of IAS 2 The objective of IAS 2 is to prescribe the accounting treatment for inventories. It provides guidance for determining the cost of inventories and for subsequently recognising

More information

Variable Costing: A Tool for Management. M. En C. Eduardo Bustos Farías

Variable Costing: A Tool for Management. M. En C. Eduardo Bustos Farías Variable Costing: A Tool for Management M. En C. Eduardo Bustos Farías 1 Absorption Costing A system of accounting for costs in which both fixed and variable production costs are considered product costs.

More information

MANAGEMENT 9 ACCOUNTING

MANAGEMENT 9 ACCOUNTING 9-1 9-2 Chapter MANAGEMENT 9 ACCOUNTING A BUSINESS PARTNER To explain the three principles guiding the design of management accounting systems. LO1 Management Accounting: Basic Framework 9-3 Management

More information

An Introduction to Cost terms and Purposes. Session 2

An Introduction to Cost terms and Purposes. Session 2 An Introduction to Cost terms and Purposes Session 2 Learning Objectives Define and illustrate a cost object Distinguish between direct costs and indirect costs Explain variable costs and fixed costs Interpret

More information

Cost Systems. Terms Cost Accounting Process Cost System Job Order Cost System

Cost Systems. Terms Cost Accounting Process Cost System Job Order Cost System Terms Cost Accounting Process Cost System Job Order Cost System Cost Systems Job-Order Costing Used for custom or unique items Each job is accounted for separately Measures cost based on completed job

More information

Inventory Cost Accounting Tips and Tricks. Nick Bergamo, Senior Manager Linda Pei, Senior Manager

Inventory Cost Accounting Tips and Tricks. Nick Bergamo, Senior Manager Linda Pei, Senior Manager 1 Inventory Cost Accounting Tips and Tricks Nick Bergamo, Senior Manager Linda Pei, Senior Manager 2 Disclaimer The material appearing in this presentation is for informational purposes only and is not

More information

Chapter 3--Product Costing: Manufacturing Processes, Cost Terminology, and Cost Flows

Chapter 3--Product Costing: Manufacturing Processes, Cost Terminology, and Cost Flows Chapter 3--Product Costing: Manufacturing Processes, Cost Terminology, and Cost Flows Student: 1. Which of the following types of organizations is most likely to have a raw materials inventory account?

More information

MANAGERIAL ACCOUNTING (135) Post-secondary

MANAGERIAL ACCOUNTING (135) Post-secondary Page 1 of 10 Contestant Number: Time: Rank: MANAGERIAL ACCOUNTING (135) Post-secondary REGIONAL 2016 Multiple Choice & Short Answer Section: Multiple Choice (20 @ 2 points each) Matching (50 @ 1 point

More information

B.COM II COST ACCOUNTING

B.COM II COST ACCOUNTING The workings under the heading of Additional Working are not required according to the requirement of the examiner. These are only for understanding the solutions. For more help, visit 2014 B.COM II COST

More information

Module 10 : Product and Process Costing. Lecture 1 : Product and Process Costing. Objectives

Module 10 : Product and Process Costing. Lecture 1 : Product and Process Costing. Objectives Module 10 : Product and Process Costing Lecture 1 : Product and Process Costing Objectives In this lecture you will learn the following Introduction. Product costing. Job costing. Process costing. Cost

More information

Managerial Accounting: Making Decisions and Motivating Performance (Datar/Rajan) Chapter 2 An Introduction to Cost Terms and Purposes

Managerial Accounting: Making Decisions and Motivating Performance (Datar/Rajan) Chapter 2 An Introduction to Cost Terms and Purposes Managerial Accounting: Making Decisions and Motivating Performance (Datar/Rajan) Chapter 2 An Introduction to Cost Terms and Purposes Learning Objective 2-1 1) The cost incurred is: A) actual costs. B)

More information

CHAPTER 2 AN INTRODUCTION TO COST TERMS AND PURPOSES

CHAPTER 2 AN INTRODUCTION TO COST TERMS AND PURPOSES CHAPTER 2 AN INTRODUCTION TO COST TERMS AND PURPOSES 2-1 A cost object is anything for which a separate measurement of costs is desired. Examples include a product, a service, a project, a customer, a

More information

Chapter 2--Product Costing: Manufacturing Processes, Cost Terminology, and Cost Flows

Chapter 2--Product Costing: Manufacturing Processes, Cost Terminology, and Cost Flows Chapter 2--Product Costing: Manufacturing Processes, Cost Terminology, and Cost Flows Student: 1. Which of the following types of organizations is most likely to have a raw materials inventory account?

More information

JOB ORDER COSTING. LO 1: Cost Systems. Determine whether job order costing or process costing would be more appropriate for each industry.

JOB ORDER COSTING. LO 1: Cost Systems. Determine whether job order costing or process costing would be more appropriate for each industry. JOB ORDER COSTING Terms Cost Accounting Process Cost System Job Order Cost System LO 1: Cost Systems Job-Order Costing Used for custom or unique items Each job is accounted for separately Measures cost

More information

Cost concepts, Cost Classification and Estimation

Cost concepts, Cost Classification and Estimation Cost concepts, Cost Classification and Estimation BY G H A N E N DR A F A G O Cost Concepts Cost refers the amount of expenses spent to generate product or services. Cost refers expenditure that may be

More information

Basic Costing Guidance

Basic Costing Guidance Basic Costing Guidance The Association of Accounting Technicians April 2010 Basic costing (BCCG) Introduction Please read this document in conjunction with the standards for all relevant units. Basic Principles

More information

MANAGERIAL ACCOUNTING. 2 nd topic COST CLASSIFICATION

MANAGERIAL ACCOUNTING. 2 nd topic COST CLASSIFICATION MANAGERIAL ACCOUNTING 2 nd topic COST CLASSIFICATION Structureofthelecture2 2.1 Definition of cost and related terms 2.2 Types of cost classification 2.3 Identification of cost classification 2.4 Reporting

More information

Cost Accounting: A Managerial Emphasis, 16e, Global Edition (Horngren) Chapter 2 An Introduction to Cost Terms and Purposes

Cost Accounting: A Managerial Emphasis, 16e, Global Edition (Horngren) Chapter 2 An Introduction to Cost Terms and Purposes Cost Accounting: A Managerial Emphasis, 16e, Global Edition (Horngren) Chapter 2 An Introduction to Cost Terms and Purposes 2.1 Objective 2.1 1) Which of the following would be considered an actual cost

More information

Reading Essentials and Study Guide

Reading Essentials and Study Guide Lesson 3 Cost, Revenue, and Profit Maximization ESSENTIAL QUESTION How do companies determine the most profitable way to operate? Reading HELPDESK Academic Vocabulary generates produces or brings into

More information

1. F; I 2. V ; D 3. V ; D 4. F; I 5. F; I 6. F; I 7. V ; D 8. F; I 9. F; I 10. V ; D 11. F; I 12. F; I 13. F; I 14. F; I

1. F; I 2. V ; D 3. V ; D 4. F; I 5. F; I 6. F; I 7. V ; D 8. F; I 9. F; I 10. V ; D 11. F; I 12. F; I 13. F; I 14. F; I SOLUTIONS TO EERCISES EERCISE 2-1 (15 minutes) 1. F; I 2. V ; D 3. V ; D 4. F; I 5. F; I 6. F; I 7. V ; D 8. F; I 9. F; I 10. V ; D 11. F; I 12. F; I 13. F; I 14. F; I EERCISE 2-2 (15 minutes) 1. Product

More information

DEFINITIONS AND CONCEPTS

DEFINITIONS AND CONCEPTS DEFINITIONS AND CONCEPTS ** CONCEPTS AND DEFINITIONS IN THIS MODULE APPEAR IN VARIOUS CHAPTERS ** Key Terms and Concepts to Know Major Management Activities Planning - formulating long and short-term plans

More information

Cost Accounting, 15e (Horngren/Datar/Rajan) Chapter 2 An Introduction to Cost Terms and Purposes. Objective 2.1

Cost Accounting, 15e (Horngren/Datar/Rajan) Chapter 2 An Introduction to Cost Terms and Purposes. Objective 2.1 Cost Accounting, 15e (Horngren/Datar/Rajan) Chapter 2 An Introduction to Cost Terms and Purposes Objective 2.1 1) An actual cost is. A) is the cost incurred B) is a predicted or forecasted cost C) is anything

More information

UNIT Management Accounting (Intermediate 1)

UNIT Management Accounting (Intermediate 1) National Unit Specification: general information NUMBER DF4T 10 COURSE Accounting (Intermediate 1) SUMMARY This Unit is designed as an introduction to management accounting. It will allow candidates to

More information

ACG 2071 Managerial Accounting Spring 2018 Exam #4 Sample Review Problems

ACG 2071 Managerial Accounting Spring 2018 Exam #4 Sample Review Problems Page 1 ACG 2071 Managerial Accounting Spring 2018 Exam #4 Sample Review Problems This is an independent effort. Do your own work! The ACE tutors and the SI may not assist you on this sample exam prior

More information

Higher National Unit specification. General information for centres. Unit code: F7JR 34

Higher National Unit specification. General information for centres. Unit code: F7JR 34 Higher National Unit specification General information for centres Unit title: Cost Accounting Unit code: F7JR 34 Unit purpose: This Unit is designed to introduce candidates to costing techniques that

More information

COST SHEET. Samir K Mahajan

COST SHEET. Samir K Mahajan COST SHEET Samir K Mahajan COMPONENTS OF TOTAL COST Prime cost or Direct cost : It is the aggregate of direct material cost, direct labour cost and direct expenses. i.e. Prime cost or Direct cost = Direct

More information

CHAPTER 2 AN INTRODUCTION TO COST TERMS AND PURPOSES

CHAPTER 2 AN INTRODUCTION TO COST TERMS AND PURPOSES CHAPTER 2 AN INTRODUCTION TO COST TERMS AND PURPOSES 2-1 A cost object is anything for which a separate measurement of costs is desired. Examples include a product, a service, a project, a customer, a

More information

Case study Dealing with overheads

Case study Dealing with overheads Case study Dealing with overheads This is the solution to the case study found at the end of: Chapter 7 Costing (a) Overhead apportionment Basis Total Cutting and turning Assembly and finishing Factory

More information

Chapter 2--Cost Terminology and Cost Behaviors

Chapter 2--Cost Terminology and Cost Behaviors Chapter 2--Cost Terminology and Cost Behaviors Student: 1. A cost object is anything for which management wants to collect or accumulate costs. 2. A production plant could be a cost object. 3. A specific

More information

Chapter 2 Cost Terms, Concepts, and Classifications

Chapter 2 Cost Terms, Concepts, and Classifications Multiple Choice Questions 16. Indirect labor is a part of: A) Prime cost. B) Conversion cost. C) Period cost. D) Nonmanufacturing cost. Answer: B Level: Medium LO: 1,2 Source: CPA, adapted 17. The cost

More information

Cost & Management Accounting Bachelors of Business (Specialized in Finance) Study Notes & Tutorial Questions Chapter 3: Labor Costing

Cost & Management Accounting Bachelors of Business (Specialized in Finance) Study Notes & Tutorial Questions Chapter 3: Labor Costing Cost & Management Accounting Bachelors of Business (Specialized in Finance) Study Notes & Tutorial Questions Chapter 3: Labor Costing 1 INTRODUCTION Labour is the second element of cost after materials.

More information

Problem Exercise 3-12

Problem Exercise 3-12 Exercise 3-12 1. The overhead applied to Ms. Miyami s account would be computed as follows: 2002 2001 Estimated overhead cost (a)... $144,000 $144,000 Estimated professional staff hours (b)... 2,250 2,400

More information

CAS-4 COST ACCOUNTING STANDARD ON COST OF PRODUCTION FOR CAPTIVE CONSUMPTION

CAS-4 COST ACCOUNTING STANDARD ON COST OF PRODUCTION FOR CAPTIVE CONSUMPTION CAS-4 COST ACCOUNTING STANDARD ON COST OF PRODUCTION FOR CAPTIVE CONSUMPTION The following is the text of the COST ACCOUNTING STANDARD 4 (CAS-4) issued by the Council of the Institute of Cost and Works

More information

Standard Costing and Variance Analysis

Standard Costing and Variance Analysis 5 Standard Costing and Variance Analysis Standard Costing and Variance Analysis 5 LEARNING OUTCOMES After completing this chapter, you should be able to: explain the difference between ascertaining costs

More information

` 16,667 ` 3,33,340. = 16, MT Truck: x = 14,167

` 16,667 ` 3,33,340. = 16, MT Truck: x = 14,167 INTER CA MAY 2018 COSTING Topic: Operating Costing,, Budgetary Control, Integral and Non Integral, Cost Sheet, Process Costing, Materials. Test Code M21 Branch: MULTIPLE Date: 14.01.2018 (50 Marks) Note:

More information

CAS - 15 COST ACCOUNTING STANDARD ON SELLING AND DISTRIBUTION OVERHEADS

CAS - 15 COST ACCOUNTING STANDARD ON SELLING AND DISTRIBUTION OVERHEADS CAS - 15 COST ACCOUNTING STANDARD ON SELLING AND DISTRIBUTION OVERHEADS The following is the COST ACCOUNTING STANDARD -15 (CAS-15) issued by the Council of The Institute of Cost Accountants of India on

More information

Akuntansi Biaya. Modul ke: 09FEB. Direct Material Cost. Fakultas. Diah Iskandar SE., M.Si dan Nurul Hidayah,SE,Ak,MSi. Program Studi Akuntansi

Akuntansi Biaya. Modul ke: 09FEB. Direct Material Cost. Fakultas. Diah Iskandar SE., M.Si dan Nurul Hidayah,SE,Ak,MSi. Program Studi Akuntansi Modul ke: Akuntansi Biaya Direct Material Cost Fakultas 09FEB Diah Iskandar SE., M.Si dan Nurul Hidayah,SE,Ak,MSi Program Studi Akuntansi Effective Cost Control Specific assignment of duties and responsibilities.

More information

CAS -7 COST ACCOUNTING STANDARD ON EMPLOYEE COST

CAS -7 COST ACCOUNTING STANDARD ON EMPLOYEE COST Cost Accounting Standards Board CAS -7 COST ACCOUNTING STANDARD ON EMPLOYEE COST The following is the COST ACCOUNTING STANDARD 7 (CAS - 7) issued by the Council of The Institute of Cost Accountants of

More information

Chapter 2--Cost Terminology and Cost Behaviors

Chapter 2--Cost Terminology and Cost Behaviors Test Bank For Cost Accounting Foundations and Evolutions 9th Edition by Kinney and Raiborn Link full download: http://testbankcollection.com/download/test-bank-for-cost-accounting-foundationsand-evolutions-9th-edition-by-kinney/

More information

Chapter 2--Measuring Product Costs

Chapter 2--Measuring Product Costs Chapter 2--Measuring Product Costs Student: 1. Which of the following is notone of the three major manufacturing cost categories? A. Direct materials costs that can be easily traced to a product B. Direct

More information

2 Cost Concepts and Behavior

2 Cost Concepts and Behavior 2 Cost Concepts and Behavior Solutions to Review Questions 2-1. Cost is a more general term that refers to a sacrifice of resources and may be either an opportunity cost or an outlay cost. An expense is

More information

Basic Cost Management Concepts. M. En C. Eduardo Bustos as

Basic Cost Management Concepts. M. En C. Eduardo Bustos as Basic Cost Management Concepts M. En C. Eduardo Bustos Farías as 1 Objectives 1. Explain what is meant by the word "cost." 2. Distinguish among product costs, period costs,, and expenses. 3. Describe the

More information

An Introduction to Cost Terms and Purposes. Dr. Osama Al Meanazel

An Introduction to Cost Terms and Purposes. Dr. Osama Al Meanazel An Introduction to Cost Terms and Purposes Dr. Osama Al Meanazel Lecture 5 Other Cost Concepts Cost driver a variable that causally affects costs over a given time span Relevant range the band of normal

More information

SUPPLY. definition: Supply means the quantity offered for sale by sellers at particular prices, during a certain period of time.

SUPPLY. definition: Supply means the quantity offered for sale by sellers at particular prices, during a certain period of time. SUPPLY definition: Supply means the quantity offered for sale by sellers at particular prices, during a certain period of time. First factor affecting price is demand. Second factor affecting price is

More information

- 1 - Direct Material (Rs.) Material Cost Per Unit Units Produced

- 1 - Direct Material (Rs.) Material Cost Per Unit Units Produced - 1 - COST BEHAVIOR THE NATURE OF COSTS: Before one can begin to understand how a business is going to perform over time and with shifts in volume, it is imperative to first consider the cost structure

More information

Chapter 3 Systems Design: Job-Order Costing

Chapter 3 Systems Design: Job-Order Costing Chapter 3 Systems Design: Job-Order Costing Solutions to Questions 3-1 By definition, manufacturing overhead consists of costs that cannot be practically traced to products or jobs. Therefore, if these

More information

*Brief Exercise

*Brief Exercise *Brief Exercise 19-1 0 Presented below are incomplete manufacturing cost data. Determine the missing amounts for three different situations. Direct Materials Used Direct Labor Used Factory Overhead (a)

More information

CARIBBEAN EXAMINATIONS COUNCIL REPORT ON CANDIDATES WORK IN THE CARIBBEAN ADVANCED PROFICIENCY EXAMINATION MAY/JUNE 2012 ACCOUNTING

CARIBBEAN EXAMINATIONS COUNCIL REPORT ON CANDIDATES WORK IN THE CARIBBEAN ADVANCED PROFICIENCY EXAMINATION MAY/JUNE 2012 ACCOUNTING CARIBBEAN EXAMINATIONS COUNCIL REPORT ON CANDIDATES WORK IN THE CARIBBEAN ADVANCED PROFICIENCY EXAMINATION MAY/JUNE 2012 ACCOUNTING Copyright 2012 Caribbean Examinations Council St Michael, Barbados All

More information

Mona Loa Malaysian Manufacturing cost per bag... $6.00 $5.00 Add markup at 30% Selling price per bag... $7.80 $6.50

Mona Loa Malaysian Manufacturing cost per bag... $6.00 $5.00 Add markup at 30% Selling price per bag... $7.80 $6.50 Case 8-24 1. a. The predetermined overhead rate would be computed as follows: Expected manufacturing overhead cost $3,000,000 = Estimated direct labour-hours 50,000 DLHs =$60 per DLH b. The unit product

More information

Management s Accountability to Stakeholders Stakeholders Provide Management is accountable for: Owners Operating activities Government Creditors

Management s Accountability to Stakeholders Stakeholders Provide Management is accountable for: Owners Operating activities Government Creditors Chapter 15 Distinguish management accounting from financial accounting Management Management s Accountability to Stakeholders Stakeholders Owners Government Provide Management is accountable for: Operating

More information

ASSOCIATION OF ACCOUNTING TECHNICIANS OF SRI LANKA EXAMINER'S REPORT AA2 EXAMINATION - JANUARY 2018 (AA22) COST ACCOUNTING AND REPORTING

ASSOCIATION OF ACCOUNTING TECHNICIANS OF SRI LANKA EXAMINER'S REPORT AA2 EXAMINATION - JANUARY 2018 (AA22) COST ACCOUNTING AND REPORTING ASSOCIATION OF ACCOUNTING TECHNICIANS OF SRI LANKA EXAMINER'S REPORT AA2 EXAMINATION - JANUARY 2018 (AA22) COST ACCOUNTING AND REPORTING The question paper consisted of 4 sections and 10 questions. This

More information

MANAGEMENT ACCOUNTING

MANAGEMENT ACCOUNTING MANAGEMENT ACCOUNTING FORMATION 2 EXAMINATION - APRIL 2017 NOTES: Section A - Questions 1 and 2 are compulsory. You have to answer Part A or Part B only of Question 2. Should you provide answers to both

More information

UNIT 8 COST CONCEPTS AND ANALYSIS I

UNIT 8 COST CONCEPTS AND ANALYSIS I UNIT 8 COST CONCEPTS AND ANALYSIS I Objectives After going through this unit, you should be able to: understand some of the cost concepts that are frequently used in the managerial decision making process;

More information

Sri Lanka Accounting Standard LKAS 2. Inventories

Sri Lanka Accounting Standard LKAS 2. Inventories Sri Lanka Accounting Standard LKAS 2 Inventories CONTENTS paragraphs SRI LANKA ACCOUNTING STANDARD LKAS 2 INVENTORIES OBJECTIVE 1 SCOPE 2 5 DEFINITIONS 6 8 MEASUREMENT OF INVENTORIES 9 33 Cost of inventories

More information

6. Refer to the Michael's Manufacturing, Inc. information above. Raw materials used for July is:

6. Refer to the Michael's Manufacturing, Inc. information above. Raw materials used for July is: Review II NUMBER 1. Which of the following is a characteristic of managerial accounting? a. It is used primarily by external users. b. It often lacks flexibility. c. It is often future-oriented. d. The

More information

Accounting for Overheads - Marginal Costing

Accounting for Overheads - Marginal Costing Accounting for Overheads - Marginal Costing Marginal cost is the variable cost of one unit of product or service. Marginal costing is an alternative method of costing to absorption costing. In marginal

More information

PROCESS COSTING FIRST-IN FIRST-OUT METHOD

PROCESS COSTING FIRST-IN FIRST-OUT METHOD PROCESS COSTING FIRST-IN FIRST-OUT METHOD Key Terms and Concepts to Know Differences between Job-Order Costing and Processing Costing Process costing is used when a single product is made on a continuous

More information

Chapter 17 Job Order Costing Study Guide Solutions Fill-in-the-Blank Equations. Exercises. 1. Estimated activity base. 2. Underapplied. 3.

Chapter 17 Job Order Costing Study Guide Solutions Fill-in-the-Blank Equations. Exercises. 1. Estimated activity base. 2. Underapplied. 3. Chapter 17 Job Order Costing Study Guide Solutions Fill-in-the-Blank Equations 1. Estimated activity base 2. Underapplied 3. Overapplied Exercises 1. An automobile manufacturer produces various lines of

More information

SM-Ch02-5e.pdf Lanen_5e_IM_Ch_02.pdf Chapter 02 - Solutions.pdf Lanen_02_Instructor_Final.pdf Chapter 02.pdf

SM-Ch02-5e.pdf Lanen_5e_IM_Ch_02.pdf Chapter 02 - Solutions.pdf Lanen_02_Instructor_Final.pdf Chapter 02.pdf SM-Ch02-5e.pdf Lanen_5e_IM_Ch_02.pdf Chapter 02 - Solutions.pdf Lanen_02_Instructor_Final.pdf Chapter 02.pdf 2 Cost Concepts and Behavior Solutions to Review Questions 2-1. Cost is a more general term

More information

ACCT3310 Fall 20xx Exam #1 Dr. Bailey

ACCT3310 Fall 20xx Exam #1 Dr. Bailey Sample exam for Spring 2014 students. The purposes of this practice exam are (1) to familiarize you with my testing style, and (2) to allow you to pre-test yourself after you have studied and feel ready.

More information

10-1. Learning Objective. Identify relevant and irrelevant costs and benefits in a decision.

10-1. Learning Objective. Identify relevant and irrelevant costs and benefits in a decision. 10-1 Learning Objective Identify relevant and irrelevant costs and benefits in a decision. 10-2 Relevant Costs and Benefits A relevant cost is a cost that differs between alternatives. A relevant benefit

More information

THE PROFESSIONALS ACADEMY OF COMMERCE Mock Exam, Summer-2015 Management Accounting (Solution)

THE PROFESSIONALS ACADEMY OF COMMERCE Mock Exam, Summer-2015 Management Accounting (Solution) THE PROFESSIONALS ACADEMY OF COMMERCE Mock Exam, Summer-2015 Management Accounting (Solution) Answer to Q-1 Minimum price for making 500 units of AK 100 Materials: Rs. X (500 units 4kg) Rs.8 16,000 Y (500

More information

Part 3 : 11/11/10 07:42:55. MultiFrame Company has the following revenue and cost budgets for the two products it sells.

Part 3 : 11/11/10 07:42:55. MultiFrame Company has the following revenue and cost budgets for the two products it sells. Question 1 - CMA 1290 4-4 - Decision Making MultiFrame Company has the following revenue and cost budgets for the two products it sells. Plastic Frames Glass Frames Budgeted unit sales 100,000 300,000

More information