Detailed CV. Degree obtained B.Tech Met. Engg M.Tech. Met. Engg Ph.D. (Dr.-Ing.) Met. Engg Post Doc Fellow Met Engg.

Transcription

1 Detailed CV Name: Dr. Satish Chandra Koria Date of Birth: April 6, 1946 Educational Qualification: Name of Institution Banaras Hindu University Banaras Hindu University Technical Uni. Aachen, Germany Technical Uni. Aachen, Germany Year of Graduation Degree obtained Subjects 1967 B.Tech Met. Engg 1969 M.Tech. Met. Engg 1981 Ph.D. (Dr.-Ing.) Met. Engg Post Doc Fellow Met Engg. Professional Experience Name of Post Year Responsibilities Institution Uni. Of Roorkee Lecturer Teaching, research, and development of courses at UG and PG level Technical Uni. Aachen Germany Doctorate and Post Doc fellow Research and Laboratory Development IIT Kanpur Asst. Professor 1984 to 1991 Teaching, research, and development of courses at UG and PG level IIT Kanpur Professor Since 1991 till June 2011 Teaching, research, and development of courses at UG and PG level

2 Administrative Experience: Post Tenure Responsibilities Convener To organise and conduct faculty meetings Faculty Meetings Head, Centre for Development of Tech. Education, IIT Kanpur To implement AICTE schemes for the benefit of teachers working in AICTE approved Engineering Colleges. The schemes are Admissions to M.Tech and PhD under QIP, short term courses, Development of teaching manuals, Book writing etc. Head, Materials To provide leadership to achieve excellence in & Met. Engg. Chairman, Students Placement Committee, IIT Kanpur Convener Faculty Meetings Member Faculty Affairs Committee Convener, Dept. Undergraduate Committee Warden/Chief warden, Hall 3 teaching and research To provide guidance for placement to students of IIT Kanpur To organise and conduct faculty meetings Continuing Education: To assist department to search qualified faculty To assist Head to run UG Programme of dept Hostel management The following short term courses were organised for teachers, R &D professionals and engineers 1. Continuous casting of Steel 2. Materials and processes for Aircraft industry 3. Materials and Materials science 4. Materials Testing 5. Materials and Processes for HAL Management trainees 6. Materials and energy balance in metal extraction and refining 7. Energy efficiency in high temperature furnaces 8. Steelmaking Conferences organised: 1) Convener, Annual Technical Meeting of Indian Institute of Metals, ) Convener National Workshop on Ladle-Tundish-Mold Operations: Principles and Practices, 2003

3 Awards and Honors 1) Wilhelm Borcher s Medal of Technical University, Aachen, Germany for outstanding Ph.D. Thesis ) Life Fellow of Indian Institute of Metals 3) Best research work done by teachers of Engineering colleges, Maharashtra State National Award, Indian Society for Technical Education, ) Council Member, Indian Institute of Metals 5) Member of an Expert group for assessment of induction furnace capacity, Ministry of steel, Government of India Teaching, Research and Laboratory development Teaching: Courses Taught: Ironmaking and steelmaking Transport phenomena in materials Processing Kinetics Principles of metal extraction and refining Introduction to manufacturing processes Furnace technology, Injection Metallurgy, Metallurgical Engineering Design Courses Developed: Metallurgical Engg. Design, Furnace Technology, Injection Metallurgy Research: Devoted mainly in the area of Heat, mass and momentum transfer in metallurgy. Several post graduate students have worked for their M.Tech (around 25) and Ph.D(around 4). degree. Expertise: Technology of steelmaking, Energy and environment, high temperature furnaces

4 Sponsored Projects and consultancy 1) Continuous casting of steel, Funded by National Mission for Iron and steel, Department of steel, Govt. of India 2) Dephosphorization of steel, Tata Iron and Steel company, Jamshedpur 3) Energy efficiency in rolling, Rathi Steels, Gaziabad 4) Production of ferro-silicon in EAF, Induction capacity calculations, consumption of ferro-alloys 5) Modernization of lab funded by MHRD Invited Lectures: At Tata Iron & Steel Company (TISCO), Mukand Iron and Steel, SAIL, R &D. At Institute for ferrous Metallurgy, Hanoi, Vietnam on smelting reduction and ROMELT process At Metallurgical Engineering Society, Department of Metallurgical Engg, Vadodara on Process metallurgy of steelmaking, Fuel economy in Industrial furnaces, Fundamentals of process modelling, Fundamentals of Physical modelling, Transport phenomena in spray deposition of steelmaking Laboratory Development: UG extractive metallurgy laboratory for undergraduate students is developed with the state of the art experiments to conduct MME 331 laboratory National Programme of Technological Enhanced Learning(NPTEL) The following video and web courses are developed under NPTEL Steelmaking Fuels, Furnaces and Refractory Materials and Heat balance in Metallurgical Processes The video course consists of 42 lectures and each lecture is of min. duration. The course is followed by self evaluation questions The above courses can be accessed at IITM website under NPTEL

5 List of Publications: 1. A K Tripathy and S C Koria Recent developments in steelmaking technology Indian Steel Age (May, 1971) p S C Koria, A K Misra, R N Bajpai, S Bhargava and M N Saxena Design and construction of fixed sieve diaphragm jig, Metals and Minerals 12 (1973), p S C Koria, A K Tripathy and M N Saxena Preparation of pre-reduced iron ore briquettes and studies on the kinetics of the process Engineering World (1973) No.2, p S.K.Jain, S.C.Koria and M.N.Saxena Bacterial leaching of metal sulphides Metals and Minerals review, April 1976, pp S C Koria and K W Lange Single drop breakup in a turbulent jet size and carbon distribution Physico-chemie. Et. Siderurgie (1978) p , 6. S C Koria and K W Lange Breakup of iron-carbon drops by a high velocity gas jet Canadian metallurgical quarterly, 18 (1979) p S C Koria and K W Lange Production of drops in the initial stages of basic oxygen steelmaking Proceedings 3 rd Int. Iron steel Congress, Chicago, American Society of Metals, Partk. Ohio (1979) p S C Koria and K W Lange Interaction between an oxygen jet and molten iron in BOF Steelmaking Film V2199 (16 mm colour movie tone film). Institute for the scientific film, Nonnenstieg, Gottingen, West Company 1980). This film is 12 minutes long duration and can be obtained from the said address. 9. S C Koria and K W Lange Interaction between oxygen jets and molten iron in L D converter Publication scientific film section Technische Wiss. Naturwissenschaft Ser. 8, No.9 D1386 p.12(1981) 10. S C Koria and K W Lange Disintegration of an iron-carbon drop by high velocity gas jet Ironmaking and Steelmaking 19 (1983) No.4, p S C Koria and K W Lange A new approach to investigate the drop size distribution of BOF steelmaking Met. Trans. 15B (1984) p S C Koria and K W Lange Effect of top blowing parameters on drop size and drop size distribution in BOF steelmaking Arch. Eisenhuttenwes. 55 (1984) p

6 13.S C Koria and K W Lange An experimental study on the behaviour of an under expanded supersonic gas jet Arch. Eisenhuttenwes, 55 (1984) p S C Koria and K W Lange Mixing time correlation in top gas stirred melts Arch. Eisenhuttenwes, 55 (1984) p S C Koria and K W Lange Effect of Melting scrap on the mixing time of bottom gas stirred melts Proceeding 6 th Japan-Germany seminar, Tokyo, Japan (1984) p S C Koria and K W Lange Estimation of drop sizes in impinging jet steelmaking Ironmaking and steelmaking V.13 (1986) No.5 p S C Koria and K W Lange Development of blowing practice for combined top blowing and bottom stirred processes Process, Techn. Proceedings 5 th Intern. Iron and Steel Congress Vo.6, (1986) p S C Koria and K W Lange Correlation between drop size distribution or total drop mass and oxygen top blowing parameter Process Techn./ Proceeding (5 th Intern. Iron and Steel Congress) Vol.6 (1986) p S C Koria and K W Lange Penetrability of impinging gas jets in molten steel bath Steel Research 58 (1987) No.9 p S C Koria, K W Lange and R. Siemssen Application of empirical correlations to develop blowing pattern for small scale, combined blown Steelmaking converter, Institute for Ferrous Metallurgy, Technical Report (1987)p S C Koria Video color film on gas induced stirring in liquid bath Film produced in cooperation with TV Centre, IIT Kanpur (1988). 22. S C Koria Dynamic variations of lance distance in impinging jet steelmaking processes Steel Research, Vol. 59 (1988), No.6, p S C Koria and A George Experimental investigation on selection of bottom injection parameters in combined blown steelmaking Ironmaking & Steelmaking, Vol.15 (1988) p S C Koria Nozzle design in impinging jet steelmaking processes Steel Research 59 (1988) No.3, p S C Koria and C D Khai Model study on dissolution of dense solid additives in bottom gas stirred steel melts Trans. Ind. Inst. Of Metals Vo.41 (1988) No.2, p S C Koria Model investigations on liquid velocity induced by submerged gas injection in steel bath Steel Research 59 (1988) No.11, p

7 27. S C Koria Thermodynamic considerations in designing gas injecting lances submerged in melt Ironmaking and Steelmaking 16 (1989) No.1, p S C Koria Modelling of submerged gas inecting lance design parameters Steel Research, Vo.60, (1989) No.2, p S C Koria and S Singh Experimental investigations on the design of gas injecting lances ISI Japan International, Vo.29 (1989) No.8, p S C Koria and S Singh Measurements on local properties of a heterogenerous air/water plume formed during uptward Injection of gas Steel Research, Vol.60 (1989) No.7, p S C Koria and C D Khai Model study on dissolution time of metallic materials in steelmelt Trans. Ind. Inst. Of Metals, Vol.42 (1989) No.1, p S C Koria, R K Dube and R Subramanian Atomization of liquid aluminium stream by multiple discrete nitrogen jets Powder Metallurgy International, Vol 20, (1989), p S C Koria and S Singh Studies on structure-property correlationship of gas bubble plume rising in liquid Steel Research Vol.61, (1990), No.7, p S C Koria Consolidation of approaches for bubbling jetting transition of gas jets in liquids Ironmaking & Steelmaking, Vol17, (1990), No.1, S C Koria and M R R I Shamshi Simulation of mass transfer between metal and slag in gas stirred ladles Ironmaking and Steelmaking 17 (1990) 36. S C Koria and S Pal Model study on mixing condition in combined blown steelmaking bath Ironmaking & Steelmaking, 17 (5), 1990, S C Koria, R K Dube and R Subramanian Studies on preparation of lead powder using an open type atomizer with multiple discrete nitrogen jets Trans. IIM 43 (3), 1990, S C Koria and S Pal Experimental study of the effect of gas injection parameter on the bath mixing intensity induced during steelmaking Steel Research 62 (02), 1991, S C Koria and S Singh Physical modelling of bubble plume rising in steel melt Trans. Indian Inst. Metals 44 (03), 1991,

8 40. S C Koria Fluid dynamic aspects of lance design for submerged gas injection practice Trans. Ind. Inst Metals 44 (2), 1991, S C Koria and S Pal Experimental investigations on stirring potential of impinging gas jets in steelmaking Trans. Ind. Inst. Metals 44 (1991), S C Koria Studies of the bath mixing intensity in converter steelmaking processes Canadian Met. Quarterly 31 (2), 1992, S C Koria and R Datta Design of air-water mist jet nozzle Ironmaking and Steelmaking 19 (5), 1992, S Singh and S C Koria Physical modelling of steel flow in continuous casting tundish Ironmaking and Steelmaking 20, 1993, S Singh and S C Koria Model study of the dynamics of flow of steel melt in the tundish ISIJ International 33 (12), 1993, S C Koria and P Umakanth Model studies of slag carry-over during drainage of metallurgical vessels Steel Research 65 (01), 1994, S C Koria and P Umakanth Water model study of slag carry-over during molten steel transfer Trans. Ind. Inst. Metals 47 (2-3), 1994, S Singh and S C Koria Physical modelling of the effects of the flow modifier on the dynamics of molten steel flowing In a tundish ISIJ International 34 (10), 1994, S Singh and S C Koria Study of fluid flow in tundishes due to different types of inlet streams Steel Research 66 (70), 1995, S Singh and S C Koria Tundish steel melt dynamics with and without flow modifiers through physical modelling Ironmaking and Steelmaking 23(3), 1996, S C Koria Study of a two stage smelting reduction process for ironmaking by a thermochemical model Proc. of Internal. Conf. On alternative routes of iron and steelmaking, Edited by V N Misra And R J Holmes, Sept. 1997, Publication series No.3199 of the Australian Institute of Mining and Metallurgy, S C Srivastava and S C Koria Effect of argon shrouded stream ouring on the behaviour of fluid flowing in a tundish Scand. Jl. Of Metallurgy, 26(3), 1997,

9 53. S C Koria and K S Rao Mathematical model for powder injection refining of steel melt Ironmaking and Steelmaking 25 (6), 1998, S C Koria Influence of injection metallurgy on mass transfer in stellmaking Trans. Ind. Inst. Metals 47 (10), 1999, S C Koria, M K Barui and L K Pandey Thermochemical model of two stage smelting reduction process for ironmaking Scand. Jl. Of Metallurgy 28 (1999), S C Koria and S C Srivastava Residence time distribution of steel melt due to argon shrouded stream pouring in a tundish Steel Research 70 (1999), D Singh, S C Koria and R K Dube Velocity of gas from free fall type atomizers Powder Metallurgy 42 (1), 1999, S C Koria and R Dutta Study on the effect of some process parameters on the powder injection refining by a mathematical model Scand. Jl. Of Metallurgy 29, No.6 (2000) S C Koria and M K Barui Influence of post combustion heat transfer efficiency on the fuel reduction in the cores process Ironmaking and Steelmaking 27 No.5 (2000) D Singh, S C Koria and R K Dube Study of free fall gas atomisation of liquid metals to produce powder Powder Metallurgy 44 (2), 2001, D Singh, R K Dube and S C Koria Studies on metal build up on atomizers during free fall gas atomisation of liquid metals Powder Metallurgy 46 (2) (2003), D Singh, R K Dube and S C Koria Development of operating pressure diagram for free fall gas atomisation Of liquid metals ISIJ International 43 (12) (2003), Anil Kumar, S C Koria and D Mazumdar An assessment of fluid flow modelling and residence time distribution phenomena in steelmaking tundish systems ISIJ International 44(2004) No. 8, Anil Kumar, D Mazumdar and S C Koria Experimental Validation of Flow and Tracer-Dispersion Models in a Four-Strand Billet-Casting Tundish Metallurgical and Materials Trans. 36 (2005) No.6 PP S.N.Sahu, Harikishore.S and S.C. Koria Solidification Behavior of Droplets in Spray Deposition Powder Metallurgy International 48 (3) (2005)

10 66 Harikishore S,. and S.C.Koria Two dimensional modeling of transport and solidification phenomena and spray deposition Trans. Indian Inst. Met. 59, No.3 June 2006, PP Manas R. Tripathi, Ravindra K.Dube and Satish C.Koria Rolling behaviour of steel backed Al-Sn strip, Jl. Of Materials Processing Technology, August Manas Ranjan Tripathy, B. V. Manoj Kumar, Bikramjit Basu, R. K. Dube, S. C. Koria; Tribological Behavior of Steel Backed Al-Sn Strips prepared via Spray Atomization-Deposition- Rolling Route Materials Science and Technology 23 [12] (2007) 1 69 Arthitha Dey, S.C.Koria and R.K.Dube Model prediction and experimental validation of porosity in spray deposits Powder Metallurgy International 50 (2007) 70) A. Dalela. R. Mathur and S.C.Koria,: Analysis of energy consumption in industrial furnaces and generation of carbon credits, Advances in the theory of Iron-making and Steelmaking, (2009) 463