Test Report No. F690101/LF-CTSAYAA

Transcription

1 Issued Date : Page 1 of 8 LG MMA CORP. 8, Yeosusandan 4-ro Yeosu-si, Jeollanam-do9613 Korea The following sample(s) was/were submitted and identified by/on behalf of the client as:- SGS File No. Product Name : AYAA : HI32S Item No./Part No. : N/A Received Date : Test Period : to Test Results : For further details, please refer to following page(s) SGS Korea Co., Ltd. Jeff Jang / Chemical Lab Mgr t +82 (0) f +82 (0)

2 Issued Date : Page 2 of 8 Sample No. Sample Description : HI32S Item No./Part No. : N/A Materials : N/A Heavy Metals : AYAA Cadmium (Cd) With reference to IEC :2013 (Determination of Cadmium by ICP-OES) 0. Lead (Pb) With reference to IEC :2013 (Determination of Lead by ICP-OES) Mercury (Hg) With reference to IEC :2013 (Determination of Mercury by ICP-OES) 2 Hexavalent Chromium (Cr VI) With reference to IEC 62321:2008 (Determination of Hexavalent Chromium by spot test/colorimetric Method using UV-Vis) 1 Flame Retardants-PBBs/PBDEs Monobromobiphenyl With reference to IEC :201 Dibromobiphenyl With reference to IEC :201 Tribromobiphenyl With reference to IEC :201 Tetrabromobiphenyl With reference to IEC :201 Pentabromobiphenyl With reference to IEC :201 Hexabromobiphenyl With reference to IEC :201 Heptabromobiphenyl With reference to IEC :201 Octabromobiphenyl With reference to IEC :201 Nonabromobiphenyl With reference to IEC :201 Decabromobiphenyl With reference to IEC :201 Monobromodiphenyl ether With reference to IEC :201 Dibromodiphenyl ether With reference to IEC :201 Tribromodiphenyl ether With reference to IEC :201 t +82 (0) f +82 (0)

3 Issued Date : Page 3 of 8 Sample No. Sample Description : HI32S Item No./Part No. : N/A Materials : N/A Flame Retardants-PBBs/PBDEs : AYAA Tetrabromodiphenyl ether With reference to IEC :201 Pentabromodiphenyl ether With reference to IEC :201 Hexabromodiphenyl ether With reference to IEC :201 Heptabromodiphenyl ether With reference to IEC :201 Octabromodiphenyl ether With reference to IEC :201 Nonabromodiphenyl ether With reference to IEC :201 Decabromodiphenyl ether With reference to IEC :201 Phthalates Di-(2-ethylhexyl) phthalate (DEHP) 0 Di-butyl phthalate (DBP) 0 Benzyl butyl phthalate (BBP) 0 Di-isobutyl phthalate (DIBP) 0 Di-isodecyl phthalate (DIDP) 0 Di-isononyl phthalate (DINP) 0 Di-n-octyl phthalate (DNOP) 0 Di-ethyl phthalate(dep) 0 Di-methyl phthalate (DMP) 0 Halogen Content Bromine(Br) With reference to EN 1482, IC 30 Chlorine(Cl) With reference to EN 1482, IC 30 t +82 (0) f +82 (0)

4 Issued Date : Page 4 of 8 NOTE: (1) = Not detected.(<mdl) (2) = ppm (3) MDL = Method Detection Limit (4) - = No regulation () Negative = Undetectable / Positive = Detectable (6) ** = Qualitative analysis (No Unit) (7) * = a. The sample is positive for CrVI if the CrVI concentration is greater than 0.13 ug/cm2. The sample coating is considered to contain CrVI. b. The sample is negative for CrVI if CrVI is n.d. (concentration less than 0.10 ug/cm2). The coating is considered a non-crvi based coating. c. The result between 0.10 ug/cm2 and 0.13 ug/cm2 is considered to be inconclusive - unavoidable coating variations may influence the determination. Picture of Sample as Received: AYAA t +82 (0) f +82 (0)

5 Issued Date : Page of 8 Testing Flow Chart for RoHS:Cd/Pb/Hg/Cr 6+ /PBBs&PBDEs Testing Cd/Pb/Hg Mechanic_Sample PBBs/PBDEs Mechanic_Sample Cr 6+ Mechanic_Sample Sample Measurement Sample Measurement Sample Measurement Acid Digestion with Microwave/Hotplate Filtration Residue Total Digestion ICP-AES/AAS/MS DATA Solvent Extraction of the Sample Screen Analysis Concentration/Dilution of Extraction Solution Filtration GC/MS DATA Nonmetallic Material Adding Extraction Solution Heating to 90~9 C for Extraction Filtration and ph Adjustment Adding 1,-Diphenylcarbazide for Color Development UV-Vis DATA The samples were dissolved totally by pre-conditioning method according to above flow chart for Cd,Pb,Hg. Section Chief : Gilsae Yi t +82 (0) f +82 (0)

6 Cr6+ Mechanic_Sample Issued Date : Page 6 of 8 Sample Measurement Metallic Material Boiling water extraction (0 ± ) cm2 0 ml DI water Remove sample after boiling for 10 min Filter the solution by 0.4 µm if necessary 1 ml orthophosphoric acid 2 ml as sample blank 2 ml as sample 1 ml diphenylcarbazide aci UV-VIS Absorbance Value <0.1 µg/cm2 0.1 µg/cm2 Absorbance Value 0.13 µg/cm2 Absorbance Value >0.13 µg/cm2 Negative result Inconclusive Positive result t +82 (0) f +82 (0)

7 Issued Date : Page 7 of 8 Flow Chart for Halogen Test Sample screening using XRF. Liquid containing water(>80%) Yes No Weigh the samples into the combustion boat. Add absorption solution into the bomb or tube. Admit O2 gas or O2 +Ar2 gas and start the combustion. Allow during absorption of the burnt gas. Dilute the solution (EPA300) Analyze absorbed solution using Ion Chromatography. Data t +82 (0) f +82 (0)

8 Issued Date : Page 8 of 8 Flow Chart for Phthalate Test Sample pretreatment / Separation Sample dissolved / extracted by THF Dilute Extracted solution Analysis was performed by GC/MS Data *** End of Report *** t +82 (0) f +82 (0)