ABRASION PROTECTION ELECTRICAL SOLUTIONS

Size: px

Start display at page:

Download "ABRASION PROTECTION ELECTRICAL SOLUTIONS"

Johnathan Randall
5 years ago
Views:

ABRASION PROTECTION Panduit abrasion protection products provide an economical and easy way insulate, protect, bundle and color-code components and cable.

to help assure optimum quality, Panduit abrasion protection products are designed and manufactured meet applicable quality standards including International, UL, Military, ISO, and Aerospace.

1 ABRASION PROTECTION Panduit abrasion protection products provide an economical and easy way insulate, protect, bundle and color-code components and cable. A wide variety of sizes and materials are available meet a broad range of indoor and outdoor applications.to help assure optimum quality, Panduit abrasion protection products are designed and manufactured meet applicable quality standards including International, UL, Military, ISO, and Aerospace. Pan-Wrap Split Harness Wrap features a patented slot pattern improve flexibility and abrasion protection Spiral wrap bundles and protects wire and cable while providing the largest variety of colors, materials, and sizes meet a variety of needs Grommet edging protects wire and cable from damage caused by sharp panel edges Heat shrink is available in many different materials and sizes meet a variety of needs Corrugated loom tubing is crush, impact, and abrasion resistant reduce the risk of damage wire and cable Braided expandable sleeving provides continuous abrasion resistance and lightweight durable protection, with a flexible open weave that will not trap heat or humidity Panduit abrasion protection products provide quality at the lowest installed cost. With a continued focus on new product development, Panduit continues meet cusmer needs. Ties For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 1

2 Ties for Pan-Wrap PW 50 F C 20 Type PW = Pan-Wrap Outside Diameter 38 = 3/8" 50 = 1/2" 75 = 3/4" 100 = 1" 150 = 1 1/2" Material F = FR = Package Size L = 50' (15.2m) C = 100' (30.5m) T = 200' (61.0m) TL = 250' (76.2m) Color Suffix Leave Blank = Natural 20 = Black 3 = Orange 4 = Yellow 2 Pan-Wrap Split Harness Wrap Patented slot pattern provides improved flexibility and abrasion protection in any application Unique wall design provides for easy cable breakouts Innovative design maintains uniform bundle protection in dynamic applications Diameter can be further reduced with the use of Panduit cable ties. *Order number of reels required. Considerably reduces installation time Large overlap accommodates a wide range of bundle diameters Packaged on a reel for easy handling and dispensing of product Length Max. Bundle Min. Bundle Per Reel Diameter Diameter Temperature Material Color Ft. m In. mm In. mm Range In. mm * PW38F-TL Natural F 122 F PW38F-TL20 Black PW38FR-TLY Natural PW38FR-TL20Y Black F 167 F (-20 C 75 C) PW50F-T Natural PW50F-T20 Black F 122 F PW50F-T3 Orange PW50F-T4 Yellow PW50FR-TY Natural PW50FR-T20Y Black F 167 F (-20 C 75 C) PW75F-C Natural PW75F-C20 Black F 122 F PW75F-C3 Orange PW75F-C4 Yellow PW75FR-CY Natural PW75FR-C20Y Black F 167 F (-20 C 75 C) PW100F-C Natural PW100F-C20 Black F 122 F PW100F-C3 Orange PW100F-C4 Yellow PW100FR-CY Natural PW100FR-C20Y Black F 167 F (-20 C 75 C) PW150F-L Natural PW150F-L20 Black F 122 F PW150F-L3 Orange PW150F-L4 Yellow PW150FR-LY Natural PW150FR-L20Y Black F 167 F (-20 C 75 C)

Pan-Wrap Installation Tools Patented installation ol with 180 opening allows easy loading of maximum bundle diameters speed installation, providing the lowest installed cost Color For Use With **

3 Pan-Wrap Installation Tools Patented installation ol with 180 opening allows easy loading of maximum bundle diameters speed installation, providing the lowest installed cost Color For Use With ** PWT38 White PW38F- Series 1 PWT50 White PW50F- Series 1 PWT75 White PW75F- Series 1 PWT100 White PW100F- Series 1 PWT150 White PW150F- Series 1 **Order number of ols required. Ties for Spiral Wrap T 25 F C 16 Type Outside Diameter Material Package Size Color Suffix T = Spiral Wrap 12 = 1/8" 19 = 3/16" 25 = 1/4" 38 = 3/8" 50 = 1/2" 62 = 5/8" F = R = Fire FR = N = Nylon NZFR = Halogen-Free Flame Retardant Nylon X = 10' Q = 25' L = 50' C = 100' T = 200' TL = 250' 75 = 3/4" T = TFE^ D = 500' 100 = 1" P = Polypropylene M = 1,000' See Table Below Color Natural* Color Suffix No Suffix Will be Listed 0 Black Brown 1 Red 2 Orange 3 Yellow 4 Green 5 Blue 6 Purple 7 Gray 8 White 10 Pink 16 Black 20 ^TFE is Polytetrafluorethylene material. *Natural can range from transparent, opaque, white. Fire Polyethelene Material Availability Flame Retardant Polyethelene.6 Halogen-Free Polypropylene TEFLON For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 3

Ties 4 Spiral Wrap Harness multiple cables in a single manageable bundle Allows breakouts of single/multiple cables Provides abrasion protection for wire, cables, hoses, and tubing Length Per Reel

4 Ties 4 Spiral Wrap Harness multiple cables in a single manageable bundle Allows breakouts of single/multiple cables Provides abrasion protection for wire, cables, hoses, and tubing Length Per Reel Order number of reels required, in multiples of Standard Package Quantity. Bundle Diameter Range Multiple colors allow easy identification of cable bundles Installation ol supplied in each package Available in multiple materials Reusable Outside Diameter Temperature Wall Thickness Material* Color Ft. m In. mm In. mm Range In. mm T12F-C Natural /16 1/ F 122 F T12F-D Natural /16 1/ F 122 F T19F-C Natural / F 122 F T19F-M Natural 1, / F 122 F T25F-C Natural / F 122 F T25F-C1 Brown / F 122 F T25F-C2 Red / F 122 F T25F-C3Y Orange / F 122 F T25F-C4Y Yellow / F 122 F T25F-C5 Green / F 122 F T25F-C6 Blue / F 122 F T25F-C7 Purple / F 122 F T25F-C8 Gray / F 122 F T25F-C10 White / F 122 F T25F-C16 Pink / F 122 F T25F-M Natural 1, / F 122 F T38F-C Natural / F 122 F T38F-TL Natural / F 122 F T50F-X Natural / F 122 F T50F-C Natural / F 122 F T50F-C1 Brown / F 122 F T50F-C2 Red / F 122 F T50F-C3Y Orange / F 122 F T50F-C4Y Yellow / F 122 F T50F-C5 Green / F 122 F T50F-C6 Blue / F 122 F T50F-C7 Purple / F 122 F T50F-C8 Gray / F 122 F T50F-C10 White / F 122 F T50F-C16 Pink / F 122 F *Flame retardant products are manufactured from a material that is rated UL 94V-0. Reel packaging may contain splices. Contact Panduit Cusmer Service for further information

5 Spiral Wrap (continued) Length Per Bundle Diameter Outside Wall Reel Range Diameter Temperature Thickness Material Color Ft. m In. mm In. mm Range In. mm T50F-TL Natural / F 122 F T50F-TL4Y Yellow / F 122 F T62F-C Natural /2 4 1/ F 122 F T62F-TL Natural /2 4 1/ F 122 F T75F-C Natural / F 122 F T75F-T Natural / F 122 F T100F-C Natural / F 122 F T12F-C T12F-D0 T19F-C0 T25F-X0 T25F-C0 T25F-M0 T38F-C0 T38F-TL0 T50F-X0 T50F-C0 T50F-TL0 T62F-C0 T62F-TL0 T75F-C0 T75F-T0 T100F-C0 T12R-CY T19R-CY T25R-CY T25R-C20Y Fire Fire Fire Fire Black /16 1/ F 122 F Black /16 1/ F 122 F Black / F 122 F Black / F 122 F Black / F 122 F Black 1, / F 122 F Black / F 122 F Black / F 122 F Black / F 122 F Black / F 122 F Black / F 122 F Black /2 4 1/ F 122 F Black /2 4 1/ F 122 F Black / F 122 F Black / F 122 F Black / F 122 F Natural /16 1/ F 122 F Natural / F 122 F Natural / F 122 F Black / F 122 F *Flame retardant products are manufactured from a material that is rated UL 94V-0. Reel packaging may contain splices. Contact Panduit Cusmer Service for further information Table continues on page 6 For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) Ties 5

6 Ties Spiral Wrap (continued) Material* Color T25R-MY Fire T25R-M20Y T38R-CY T38R-TLY T50R-CY T50R-TLY T62R-CY T75R-CY T100R-CY T12FR-CY T12FR-C20Y T19FR-CY T19FR-C20Y T25FR-CY T25FR-C20Y T25FR-MY T25FR-M20Y T38FR-CY T38FR-C20Y T38FR-TLY T50FR-CY T50FR-C20Y T50FR-TLY T62FR-CY T62FR-C20Y T75FR-CY T75FR-C20Y T75FR-TY T100FR-CY T100FR-C20Y Fire Fire Fire Fire Fire Fire Fire Fire *Flame retardant products are manufactured from a material that is rated UL 94V-0. Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. Length Bundle Diameter Outside Wall Per Reel Range Diameter Temperature Thickness Ft. m In. mm In. mm Range In. mm Natural 1, / F 122 F Black 1, / F 122 F Natural / F 122 F Natural / F 122 F Natural / F 122 F Natural / F 122 F Natural /2 4 1/ F 122 F Natural / F 122 F Natural / F 122 F Natural /16 1/ F 167 F (-20 C 75 C) Black /16 1/ F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Black / F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Black / F 167 F (-20 C 75 C) Natural 1, / F 167 F (-20 C 75 C) Black 1, / F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Black / F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Black / F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Natural /2 4 1/ F 167 F (-20 C 75 C) Black /2 4 1/ F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Black / F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Natural / F 167 F (-20 C 75 C) Black / F 167 F (-20 C 75 C) Order number of reels required, in multiples of Standard Package Quantity.

7 Spiral Wrap (continued) Length Bundle Diameter Outside Wall Per Reel Range Diameter Temperature Thickness Material* Color Ft. m In. mm In. mm Range In. mm T12N-C.6 Natural /16 1/ F 149 F (-40 C 65 C) T19N-C.6 Natural / F 149 F (-40 C 65 C) T25N-C.6 Natural / F 149 F (-40 C 65 C) T38N-C.6 Natural / F 149 F (-40 C 65 C) T50N-C.6 Natural / F 149 F (-40 C 65 C) T62N-C.6 Natural /2 4 1/ F 149 F (-40 C 65 C) T75N-C.6 Natural / F 149 F (-40 C 65 C) T100N-C.6 Natural / F 149 F (-40 C 65 C) T12N-C0 T19N-C0 T25N-C0 T38N-C0 T50N-C0 T62N-C0 T75N-C0 T100N-C0 T38P-C0 T50P-C0 T100P-C Polypropylene Polypropylene Polypropylene Black /16 1/ F 149 F (-40 C 65 C) Black / F 149 F (-40 C 65 C) Black / F 149 F (-40 C 65 C) Black / F 149 F (-40 C 65 C) Black / F 149 F (-40 C 65 C) Black /2 4 1/ F 149 F (-40 C 65 C) Black / F 149 F (-40 C 65 C) Black / F 149 F (-40 C 65 C) Black / F 239 F (-40 C 115 C) Black / F 239 F (-40 C 115 C) Black / F 239 F (-40 C 115 C) T12T-C TFE^ Natural /16 1/ F 500 F (-270 C 260 C) T19T-C TFE^ Natural / F 500 F (-270 C 260 C) T25T-L TFE^ Natural / F 500 F (-270 C 260 C) T25T-L0 TFE^ Black / F 500 F (-270 C 260 C) T38T-L TFE^ Natural / F 500 F (-270 C 260 C) T50T-Q TFE^ Natural / F 500 F (-270 C 260 C) T62T-Q TFE^ Natural /2 4 1/ F 500 F (-270 C 260 C) T75T-X TFE^ Natural / F 500 F (-270 C 260 C) T100T-X TFE^ Natural / F 500 F (-270 C 260 C) *Flame retardant products are manufactured from a material that is rated UL 94V-0. Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. ^TFE is Polytetrafluorethylene material For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) Ties 7

Ties for Grommet Edging GEE 36 F A C 0 Type GE = Grommet Edging Strips GEE = Slotted Grommet Edging GES = Solid Grommet Edging Max. Panel Thickness 36 = 0.036" thickness 62 = 0.062" thickness 99 = 0.

6 FR = Flame Retardant Adhesive A = Adhesive Lined Leave Blank = Non-Adhesive Package Size Q = 25' L = 50' C = 100' Color Suffix 0 = Black Leave Blank = Natural Grommet Edging Use slotted product on

8 Ties for Grommet Edging GEE 36 F A C 0 Type GE = Grommet Edging Strips GEE = Slotted Grommet Edging GES = Solid Grommet Edging Max. Panel Thickness 36 = 0.036" thickness 62 = 0.062" thickness 99 = 0.099" thickness 144 = 0.144" thickness 189 = 0.189" thickness Material F = N =.6 FR = Flame Retardant Adhesive A = Adhesive Lined Leave Blank = Non-Adhesive Package Size Q = 25' L = 50' C = 100' Color Suffix 0 = Black Leave Blank = Natural Grommet Edging Use slotted product on irregularly shaped and round panel holes Solid product is used only on straight edges Provided in 0.030" (0.8mm) thick material making it highly flexible B Width A Height B Panel Thickness Range In. mm In. mm In. mm Material Color Slotted GEE36F-C Natural GEE36F-C Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. A Temperature Range GEE62F-C Black 1 GEE99F-C Natural -40 F 122 F 1 Black 1 GEE62F-C Natural 1 GEE99F-C Black 1 GEE144F-C Natural 1 GEE144F-C Black Order number of pieces required, in multiples of Standard Package Quantity.

9 Grommet Edging (continued) Width A Height B Panel Thickness Range In. mm In. mm In. mm Material Color Solid Use on straight edges only GES36F-C Natural Temperature Range GES36F-C Black 1 GES62F-C Natural 1 GES62F-C Black 1 GES99F-C Natural 1 GES99F-C Black -40 F 122 F 1 GES144F-C Natural 1 GES144F-C Black 1 GES189F-C Natural 1 GES189F-C Black 1 Slotted Adhesive Lined GEE62F-A-C Natural 1 GEE62F-A-C Black 1 GEE99F-A-C Natural 1 GEE99F-A-C Black -40 F 122 F 1 GEE144F-A-C Natural 1 GEE144F-A-C Black 1 Solid Adhesive Lined Use on straight edges only GES62F-A-C Natural 1 GES62F-A-C Black 1 GES99F-A-C Natural 1 GES99F-A-C Black -40 F 122 F 1 GES144F-A-C Natural 1 1 Ties GES144F-A-C Slotted GEE36FR-CY GEE62FR-CY GEE99FR-CY GEE144FR-CY Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. Black 1 Natural 1 Natural 1-4 F 167 F Natural (-20 C 75 C) 1 Natural 1 Table continues on page 10 For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 9

10 Grommet Edging (continued) Ties Width Height A B Panel Thickness Range In. mm In. mm In. mm Material Color Solid Used on straight edges only GES36FR-CY Natural GES62FR-CY GES99FR-CY GES144FR-CY Slotted Nylon GEE47N-C Natural Temperature Range Natural 1 Natural -4 F 167 F (-20 C 75 C) 1 Natural 1 GEE55N-C Natural 1 GEE71N-C Natural -40 F 149 F 1 (-40 C 65 C) GEE98N-C Natural 1 GEE134N-C Natural Military Standard MS21266 in 12 3/4" Lengths GE52-C Natural 100 GE52-C69* Natural GE85-C Natural 100 GE85-C69* Natural GE128-C Natural 100 GE128-C69* Natural 100 GE192-L Natural -40 F 149 F (-40 C 65 C) 50 GE192-L69* Natural 50.6 GE255-L Natural 50 GE318-L Natural 50 GE380-Q Natural 25 GE510-Q Natural 25 Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. *This material is not listed under Military Standard MS Order number of reels required, in multiples of Standard Package Quantity.

for Corrugated Loom Tubing CLT 100 N C 630 Ties Type CLT = Slit Wall CLTS = Solid Wall Bundle Diameter 25 = 1/4" 35 = 5/16" 38 = 3/8" 50 = 1/2" 62 = 5/8" 75 = 3/4" 100 = 1" 125 = 1 1/4" 150 = 1 1/2"

11 for Corrugated Loom Tubing CLT 100 N C 630 Ties Type CLT = Slit Wall CLTS = Solid Wall Bundle Diameter 25 = 1/4" 35 = 5/16" 38 = 3/8" 50 = 1/2" 62 = 5/8" 75 = 3/4" 100 = 1" 125 = 1 1/4" 150 = 1 1/2" 188 = 1 7/8" Material N = Nylon F = Package Size X = 10' L = 50' C = 100' T = 200' D = 500'.75M = 750' 125M = 1,250' 2M = 2,000' 2.5M = 2,500' 4M = 4,000' 5M = 5,000' 7M = 7,000' 10M = 10,000' Color Suffix 630 = Black 20 = Black 3 = Orange 4 = Yellow Corrugated Loom Tubing Slit Provides protection for cables Packaged on a reel for easy handling and dispensing of product For indoor use only Available in Nylon or, this product features a lengthwise slit which makes it easy install on a bundle of wires or a pre-assembled harness assembly Crush, impact and abrasion resistant Material Color Length Per Reel Inside Diameter *Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. Outside Diameter Ft. m In. mm In. mm Temperature Range Slit Wall CLT25F-C3 Orange F 122 F 1 CLT25F-C4 Yellow F 122 F 1 CLT25F-C20 Black F 122 F 1 CLT25F-10M20 Black 10, F 122 F 1 CLT35F-C3 Orange F 122 F 1 CLT35F-C4 Yellow F 122 F 1 CLT35F-C20 Black F 122 F 1 CLT35F-7M20 Black 7, F 122 F 1 CLT38F-C3 Orange F 122 F 1 CLT38F-C4 Yellow F 122 F 1 CLT38F-C20 Black F 122 F 1 CLT38F-5M20 Black 5, F 122 F 1 CLT50F-C3 Orange F 122 F 1 CLT50F-C4 Yellow F 122 F 1 CLT50F-C20 Black F 122 F 1 CLT50F-4M20 Black 4, F 122 F 1 CLT62F-C3 Orange F 122 F 1 CLT62F-C4 Yellow F 122 F 1 CLT62F-C20 Black F 122 F 1 CLT62F-2.5M20 Black 2, F 122 F 1 CLT75F-C3 Orange F 122 F 1 * Order number of reels required, in multiples of Standard Package Quantity. Table continues on page 12 11

12 Ties Corrugated Loom Tubing Slit (continued) Length Inside Outside Per Reel Diameter Diameter Temperature Material Color Ft. m In. mm In. mm Range * CLT75F-C4 Yellow F 122 F 1 CLT75F-C20 Black F 122 F 1 CLT75F-2M20 Black 2, F 122 F 1 CLT100F-X4 Yellow F 122 F 1 CLT100F-C3 Orange F 122 F 1 CLT100F-C4 Yellow F 122 F 1 CLT100F-C20 Black F 122 F 1 CLT100F-125M20 Black 1, F 122 F 1 CLT125F-L3 Orange F 122 F 1 CLT125F-L4 Yellow F 122 F 1 CLT125F-L20 Black F 122 F 1 CLT125F-.75M20 Black F 122 F 1 CLT150F-X3 Orange F 122 F 1 CLT150F-X4 Yellow F 122 F 1 CLT150F-T20 Black F 122 F 1 CLT150F-D3 Orange F 122 F 1 CLT150F-D4 Yellow F 122 F 1 CLT150F-D20 Black F 122 F 1 CLT188F-X3 Orange F 122 F 1 CLT188F-X4 Yellow F 122 F 1 CLT188F-X20 Black F 122 F 1 Solid Wall CLTS25F-C Black F 122 F 1 CLTS25F-C3 Orange F 122 F 1 CLTS25F-10M Black 10, F 122 F 1 CLTS35F-C Black F 122 F 1 CLTS35F-C3 Orange F 122 F 1 CLTS38F-C Black F 122 F 1 CLTS38F-C3 Orange F 122 F 1 CLTS50F-C Black F 122 F 1 CLTS50F-C3 Orange F 122 F 1 CLTS62F-C Black F 122 F 1 CLTS62F-C3 Orange F 122 F 1 CLTS75F-C Black F 122 F 1 CLTS75F-C3 Orange F 122 F 1 CLTS75F-2M Black 2, F 122 F 1 CLTS100F-C Black F 122 F 1 CLTS100F-C3 Orange F 122 F 1 CLTS100F-1.25M Black 1, F 122 F 1 CLTS150F-D Black F 122 F 1 CLTS150F-D3 Orange F 122 F 1 *Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. 12 Order number of reels required, in multiples of Standard Package Quantity.

13 Corrugated Loom Tubing Slit (continued) Nylon Slit CLT25N-C630 CLT25N-10M630 CLT35N-C630 CLT38N-C630 CLT38N-5M630 CLT50N-C630 CLT50N-4M630 CLT62N-C630 CLT62N-2.5M630 CLT75N-C630 CLT75N-2M630 CLT100N-C630 CLT100N-125M630 CLT125N-L630 CLT125N-.75M630 CLT150N-D630 CLT188N-6C630 Nylon Solid CLTS25N-C CLTS25N-10M CLTS35N-C CLTS38N-C CLTS50N-C CLTS62N-C CLTS75N-C CLTS75N-2M CLTS100N-C CLTS125N-L Material Color Length Per Reel Ft. m Inside Diameter In. mm Outside Diameter In. mm Temperature Range Black F 230 F (-40 C 110 C) 1 Black 10, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black 5, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black 4, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black 2, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black 2, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black 1, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black 10, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black 2, F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 Black F 230 F (-40 C 110 C) 1 * Ties *Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 13

Ties Corrugated Loom Tubing Fittings Provide a secure way join CLT at junctions and breakouts while improving the appearance of wire harnesses Color: Black Material: Polypropylene Branch Trunk

14 Ties Corrugated Loom Tubing Fittings Provide a secure way join CLT at junctions and breakouts while improving the appearance of wire harnesses Color: Black Material: Polypropylene Branch Trunk Diameter Diameter Ctn. In. mm In. mm CF382538F-Q CF502550F-Q CF503850F-Q CF752575F-Q CF753875F-Q for Braided Expandable Sleeving SE 25 PFR M R 0 Type Size Material Package Size R = Reel Color Suffix SE = Sleeving Expandable 12 = 1/8" (3.2mm) 25 = 1/4" (6.4mm) 38 = 3/8" (9.5mm) 50 = 1/2" (12.7mm) 75 = 3/4" (19.1mm) 125 = 1 1/4" (31.8mm) 150 = 1 1/2" (38.1mm) 175 = 1 3/4" (44.5mm) P = Terephthalate (PET) PFR = Terephthalate (PET) PSC = Fray Terephthalate (PET) L = 50' (15.2m) C = 100' (30.5m) T = 200' (61.0m) D = 500' (152.4m) M = 1000' (304.8m) 0 = Black 8 = Gray 10 = White 14 Order number of reels required, in multiples of Standard Package Quantity.

Braided Expandable Sleeving Terephthalate (PET) Provides continuous abrasion protection for wires, cables, hoses and tubing Highly flexible open weave will not trap heat or humidity Allows for use

15 Braided Expandable Sleeving Terephthalate (PET) Provides continuous abrasion protection for wires, cables, hoses and tubing Highly flexible open weave will not trap heat or humidity Allows for use with irregular shapes Color Lightweight, durable protection Rated for use up 257 F (125 C) Compliant with U.S. and European passenger rail standards Diameter Range Length per reel In. mm In. mm Ft. m Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. SE12P-TR0 Black SE12P-TR8 Gray SE12P-MR0 Black SE12P-MR8 Gray SE12P-MR10 White SE25P-TR0 Black SE25P-TR8 Gray SE25P-MR0 Black SE25P-MR8 Gray SE25P-MR10 White SE38P-TR0 Black SE38P-TR8 Gray SE38P-MR0 Black SE38P-MR8 Gray SE38P-MR10 White SE50P-CR0 Black SE50P-CR8 Gray SE50P-DR0 Black SE50P-DR8 Gray SE50P-DR10 White SE75P-CR0 Black SE75P-CR8 Gray SE75P-DR0 Black SE75P-DR8 Gray SE75P-DR10 White SE125P-LR0 Black SE125P-LR8 Gray SE125P-TR0 Black SE125P-TR8 Gray SE125P-TR10 White SE150P-LR0 Black SE150P-LR8 Gray SE150P-TR0 Black SE150P-TR8 Gray SE150P-TR10 White SE175P-TR0 Black Ctn. Ties For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 15

Ties Braided Expandable Sleeving Terephthalate Provides continuous abrasion protection for wires, cables, hoses and tubing Highly flexible open weave will not trap heat or humidity Rated for use up

m SE12PFR-TR0 Black 0.12 3.2 0.094 0.250 2.4 6.4 200 61.0 1 4 SE12PFR-MR0 Black 0.12 3.2 0.094 0.250 2.4 6.4 1000 304.8 1 2 SE12PFR-TR8 Gray 0.12 3.2 0.094 0.250 2.4 6.4 200 61.0 1 4 SE12PFR-MR8 Gray 0.

16 Ties Braided Expandable Sleeving Terephthalate Provides continuous abrasion protection for wires, cables, hoses and tubing Highly flexible open weave will not trap heat or humidity Rated for use up 257 F (125 C) Color Allows for use with irregular shapes Flammability: Meets UL 1441 VW-1 Compliant with U.S. and European passenger rail standards Diameter Range Length per reel In. mm In. mm Ft. m SE12PFR-TR0 Black SE12PFR-MR0 Black SE12PFR-TR8 Gray SE12PFR-MR8 Gray SE12PFR-MR10 White SE25PFR-TR0 Black SE25PFR-MR0 Black SE25PFR-TR8 Gray SE25PFR-MR8 Gray SE25PFR-MR10 White SE38PFR-MR0 Black SE38PFR-TR0 Black SE38PFR-TR8 Gray SE38PFR-MR8 Gray SE38PFR-MR10 White SE50PFR-CR0 Black SE50PFR-CR8 Gray SE50PFR-DR0 Black SE50PFR-DR8 Gray SE50PFR-DR10 White SE75PFR-CR0 Black SE75PFR-CR8 Gray SE75PFR-DR0 Black SE75PFR-DR8 Gray SE75PFR-DR10 White SE125PFR-LR0 Black SE125PFR-LR8 Gray SE125PFR-TR0 Black SE125PFR-TR8 Gray SE125PFR-TR10 White SE150PFR-LR0 Black SE150PFR-LR8 Gray SE150PFR-TR0 Black SE150PFR-TR8 Gray SE150PFR-TR10 White SE175PFR-TR0 Black Ctn. Tooling Head Sleeving cutter/end sealer blade used with popular soldering guns cut and seal sleeving HKBS Description For dual straight shank soldering guns with.500'' spacing typical guns: WELLER Straight Shank Model 8200; WEN Model 199 or 100 (Replace tip holding screws with (2) screws included). Qty 1 16 Order number of reels required, in multiples of Standard Package Quantity.

Fray Braided Expandable Sleeving Fray-resistant design resists fraying when cut with scissors Provides continuous abrasion protection resistance for wires, cables, and tubing For indoor use only

17 Fray Braided Expandable Sleeving Fray-resistant design resists fraying when cut with scissors Provides continuous abrasion protection resistance for wires, cables, and tubing For indoor use only Rated for use up 257 F (125 C) Material: Terephthalate Ties Length Diameter Range Per Reel Ctn. Color In. mm In. mm Ft. m SE12PSC-TR0 Black SE25PSC-TR0 Black SE38PSC-TR0 Black SE50PSC-CR0 Black SE75PSC-CR0 Black SE125PSC-LR0 Black SE150PSC-LR0 Black Reel packaging may contain splices. Contact Panduit Cusmer Service for further information. For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 17

Ties for Non-Shrink PVC Tubing TV105 12 M Type TV105 = PVC Tubing Size 12 = 12 AWG 6 = 6 AWG 3 = 3 AWG 1 = 1 AWG 0.38 = 3/8" 0.50 = 1/2" 0.75 = 3/4" 1.

8m) Color Suffix Leave Blank = Clear 20 = Black Non-Shrink PVC Tubing Provides insulation and protection for lead wires, wire harness assemblies, soldered joints and components in electrical and

18 Ties for Non-Shrink PVC Tubing TV M Type TV105 = PVC Tubing Size 12 = 12 AWG 6 = 6 AWG 3 = 3 AWG 1 = 1 AWG 0.38 = 3/8" 0.50 = 1/2" 0.75 = 3/4" 1.0 = 1" Package Quantity C TL D M = = = = 100' (30.5m) 250' (76.2m) 500' (152.4m) 1000' (304.8m) Color Suffix Leave Blank = Clear 20 = Black Non-Shrink PVC Tubing Provides insulation and protection for lead wires, wire harness assemblies, soldered joints and components in electrical and electronic equipment All purpose flexible and non-shrinkable heat and moisture Flammability: Meets UL 224 VW-1 Voltage rating: 300 V and 600 V ASTM D-922 Grade CFR MIL-I-631 Type F, Form U, Grade C- Class 1 Category 1 Material: Polyvinyl chloride (PVC) UL oil resistant class 1 rating Continuous use temperature range: -4 F 221 F (-20 C 105 C) 18 Color Size Seal Sealing Compounds Length Per Reel Seals irregular openings from air, dust, or water Non-hardening sealant that adheres metal, masonry, wood or plastic Provides vibration dampening Max. Inside Diameter Wall Thickness Ft. m In mm In mm Max. Voltage Rating TV105-12MY Clear 12 AWG V 1 2 TV105-12M20Y Black 12 AWG V 1 2 TV105-6MY Clear 6 AWG V 1 2 TV105-6M20Y Black 6 AWG V 1 2 TV105-3MY Clear 3 AWG V 1 2 TV105-3M20Y Black 3 AWG V 1 2 TV105-1MY Clear 1 AWG V 1 TV105-1M20Y Black 1 AWG V 1 TV DY Clear 3/ V 1 TV D20Y Black 3/ V 1 TV DY Clear 1/ V 1 TV D20Y Black 1/ V 1 TV TLY Clear 3/ V 1 TV TL20Y Black 3/ V 1 TV CY Clear V 1 2 TV C20Y Black V 1 2 Safe and easy use, non-corrosive, non-xic, no asbess, will not stain or harm hands, and no unpleasant odor. Dielectric strength: 200 V/Mil, Min.030" thick Description DS1 seal (sealing compound) 1 lb. package 1 DS5 seal (sealing compound) 5 lb. package 1 Order number of pieces required, in multiples of Standard Package Quantity. Ctn.

Flammability Tests and Classification Products Flammability Tests and Classifications A number of test procedures have been developed which can be used for the evaluation and comparison of various

19 Flammability Tests and Classification Products Flammability Tests and Classifications A number of test procedures have been developed which can be used for the evaluation and comparison of various materials support combustion Review the following classifications find which category is designed suit your abrasion and protection applications Ties UL 94 Vertical Burning Test Test samples of material, with dimension 125 ± 5mm by 13.0 ± 5mm and provided in the minimum and maximum thickness of the intended end use product, are tested in an unconditioned (as manufactured) state and in a conditioned state (7 days at 168F, 75 C). The test requires the placement of a precisely controlled flame under a vertically supported specimen for a 10 second period. The flame is removed and the duration of flaming is recorded. If the flame extinguishes, the specimen is immediately subjected a second 10 second ignition period. Duration of flaming is again recorded. A piece of 100% cotn is placed under the specimen. Also observed and documented is if the sample drips flaming particles that ignite the cotn indicar below. Materials Classification Criteria Conditions V-0 V-1 V-2 Afterflame time for each individual specimen t 1 or t 2 _<10s _<30s _<30s Total Afterflame time for any condition set (t 1 plus t 2 for the 5 specimens) _<50s _<250s _<250s Afterflame plus afterglow time for each individual specimen after the second flame application (t 2 + t 3 ) _<30s _<60s _<60s Afterflame or afterglow of any specimen up the holding clamp No No No Cotn indicar ignited by flaming particles or drops No No Yes t 1 Afterflame time after first flame application t 2 t 3 Afterflame time after second flame application Afterglow time after second flame application MATERIALS CLASSIFIED UL 94 HB Specimens shall have a maximum burn rate of <1.5 in./min over 3 inches of thickness of.120 inches.5 inches Specimens shall have a maximum burn rate of <30 in./min over 3 inches for a thickness less than.120 inches UL 224 VERTICAL WIRE FLAME TEST Samples of fully recovered tubing are placed over a length of fine spring steel music wire. The test requires the precise placement of a controlled flame that contacts the heat shrink tubing. The flame is applied in five 15 second intervals with a time period between applications. If the flame extinguishes immediately after the first flame removal, subsequent flame applications are made the tubing. Duration of specimen flaming is noted. A piece of surgical cotn is placed under the specimen. If a flaming or glowing piece of tubing drips and ignites the cotn, this is also noted. MATERIALS CLASSIFIED AS VW-1 SHALL: Not flame or glow longer than 60 seconds following any of the five applications of the flame Not ignite or damage more than 25% of kraft paper flag that is placed around the p of the tubing Not have any specimens which drip flaming particles and ignite the surgical cotn located 9 1/2 inches below the test specimen For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 19

20 Ties Materials Technical Data Natural Lowest cost material for indoor use up 122 Natural is available in all sizes. This material has the same properties as natural polyethylene, and also has additives which allow it resist the effects of ultraviolet light and acid rain in an outdoor environment. This product is available in black only. Ratings and Approvals Physical Properties Chemical Resistance UL Temperature -40 F (-40 C) 122 F (50 C) -40 F (-40 C) 122 F (50 C) Flammability (UL 94) HB HB ELECTRICAL SOLUTIONS Melting Temperature 239 F (115 C) 239 F (115 C) Resistance (Lower number is better) 22 mg 20 mg Specific Gravity (D792) Minimum C (psi) 1400 (D368) 2000 (D368) Water Absorption (Max. 24 hrs.) 0.01% 0.03% Organic Solvents below 140 F (60 C) except chlorinated solvents below 140 F (60 C) except chlorinated solvents Alkalies Acids except oxidizing acids except oxidizing acids Petro-Chemicals Some Discoloration No Discoloration Fire * UL94-V-2 Rating This material is self extinguishing and passes the UL 94 flame retardant test with V-2 rating. -40 F (-40 C) 122 F (50 C) V F (115 C) 27 mg (D368) 0.02% below 140 F (60 C) except chlorinated solvents except oxidizing acids Some Discoloration SPIRAL WRAP * UL94-V-0 Rating. This material is self extinguishing and passes the UL94 flame retardant test with a V-0 rating. Polypropylene This material is resistant chemical attack and is suitable for harsh environment applications requiring UV/weather resistance and withstanding high temperatures..6 Nylon is strong, durable material for indoor use up 149 It offers a combination of lightweight, wide temperature range, and high abrasion resistance. This material is suitable for applications where heavy vibration or stress exists on the wiring or tubing. -4 F (-20 C) 167 F (75 C) -40 F (-40 C) 239 F (115 C) -40 F (-40 C) 149 F (65 C) V 0 HB HB 270 F (132 C) 334 F (168 C) 505 F (263 C) 22 mg mg (D368) 4000 (D638) 12,400 (D368) 0.02% 0.1% 1.2% except halogenated hydrocarbons except halogenated hydrocarbons except halogenated hydrocarbons Not recommended Some Discoloration No Discoloration No Discoloration PAN-WRAP.6 This material has the same properties as natural Nylon and also has additives which allow it resist the effects of ultraviolet light in an outdoor environment. This product is available in black only. TFE * This material is a non-flammable, fluorocarbon resin material. Highly resistant most chemicals, high resistance UV exposure, wide operating temperature range, can be used in cryogenic applications. Color: Opaque Translucent. Natural Lowest cost material for indoor use up 122 C. Natural is available in all sizes. * UL94-V-0 Rating. This material is self extinguishing and passes the UL94 flame retardant test with a V-0 rating. -40 F (-40 C) 149 F (65 C) -454 F (-270 C) 500 F (260 C) -40 F (-40 C) 122 F (50 C) -4 F (-20 C) 167 F (75 C) HB V 0 HB V F (263 C) 648 F (342 C) 239 F (115 C) 270 F (132 C) 7 mg 7 mg 22 mg mg ,400 (D368) 3000 (D876) 1400 (D638) 1500 (D876) 1.2% except halogenated hydrocarbons Not recommended 0.01% 0.01% 0.02% below 140 F (60 C) except chlorinated solvents except halogenated hydrocarbons Note: Typical operating temperature ranges are extended based on end use application and specific environment tests. TFE is Polytetrafluoroethylene material. *Contains halogens. Other materials are halogen free. except oxidizing acids No Discoloration No Discoloration Some Discoloration Some Discoloration 20 Order number of pieces required, in multiples of Standard Package Quantity.

21 GROMMET EDGING CLT FITTINGS PVC CLT SLEEVING Materials Technical Data (continued) Terephthalate (PET) This material is a thermoplastic polyester material designed for indoor applications.it is rated for use up 257 F and will lerate short-term exposure up 446 Colors: Black, White and Gray. * Terephthalate (PET) This material is a self-extinguishing thermoplastic polyester that can be used indoors. It is also rated for use up 257 F and will lerate short term exposure up 446 It is provided with tracers identify the flame retardant material. Black Polypropylene Lowest cost material is for use up 122 Other colors may be available. Nylon is a strong, impact modified, heat stabilized, durable high abrasion resistant material. PVC Non-Shrink Tubing* This material provides insulation and protection for continuous use at temperature -4 F (-20 C) 221 F(105 C). Black Lowest cost material is for use up 122 Other colors may be available. Natural Lowest cost material for indoor use up 122 Natural is available in all sizes. This material has the same properties as natural polyethylene, and also has additives which allow it resist the effects of ultraviolet light and acid rain in an outdoor environment. This product is available in black only. * UL94-V-0 Rating This material is self-extinguishing and passes the UL94 flame retardant test with a V-0 rating. Nylon Nylon is strong, durable, self-extinguishing material for indoor use up 149 It offers a combination of lightweight, wide temperature range, and high abrasion resistance. This material is suitable for applications where heavy vibration or stress exists on the wiring or tubing. Ratings and Approvals UL Temperature -94 F (-70 C) 257 F (125 C) -94 F (-70 C) 257 F (125 C) -40 F (-40 C) 122 F(50 C) -40 F (-40 C) 230 F (110 C) -4 F (-20 C) 221 F (105 C) -40 F (-40 C) 122 F (50 C) -40 F (-40 C) 122 F (50 C) -40 F (-40 C) 122 F (50 C) -4 F (-20 C) 167 F (75 C) -40 F (-40 C) 149 F (65 C) Flammability (UL 94) HB UL 1441 VW F (260 C) 469 F (243 C) HB HB UL 224 VW-1 UL94 HB HB HB V 0 V F (211 C) Physical Properties F (115 C) 239 F (115 C) 270 F (132 C) 491 F (255 C) ELECTRICAL SOLUTIONS 22 mg 20 mg 22 mg 7 mg ,000 (D876) 39,295 (D876) 1500 (D638) 8000 (D638) 2500 (D876) 3,900 (D638) 1400 (D638) 2000 (D638) 0.08% 0.08% % 0.03% % 12,400 (D638) 1.5% some solvents some solvents except halogenated hydrocarbons except halogenated hydrocarbons except aromatic hydrocarbons, kenes and esters except halogenated hydrocarbons below 140 F (60 C) except chlorinated solvents below 140 F (60 C) except chlorinated solvents below 194 F (90 C) except chlorinated solvents except phenols and formic acid Note: Typical operating temperature ranges are extended based on end use application and specific environment tests. *Contains halogens. Other materials are halogen free. Melting Temperature Resistance (Lower number is better) Specific Gravity (D792) Minimum C (psi) Water Absorption (Max. 24 hrs.) Organic Solvents Chemical Resistance Alkalies most weak bases most weak bases Acids Not recommended except oxidizing acids except oxidizing acids except oxidizing acids except oxidizing acids most weak acids Petro-Chemicals Some Discoloration Some Discoloration No Discoloration No Discoloration No Discoloration Some Discoloration Some Discoloration No Discoloration Some Discoloration No Discoloration Ties For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 21

22 Ties Panduit Heat Shrink Tubing Heat Shrink Tubing Quick Selection Guide Quick reference for Panduit Heat Shrink for specific location applications CHARACTERISTICS U.L. Listed HSTT HSTTV HSTTN HSTTK HSTTT HSTTP UL Recognized X X X X X X X X CSA Certified X X X X X X VW-1-Rated X X X X X^ X^ X^ X^ X Very Flexible X X HSTTPN HSTTVA HSTTRA Flexible X X X X X Semi-Rigid X X X X X Thin Wall X X X X X X X X X X X Thick Wall X X X Cross-Linked Material X X X X X X X X X X X X Colors Available X X X* Shrink Ratio 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2.5:1 min. HSTTA HSTT4A HST X HSEC HSECFR 3:1 4:1 3:1 2.5:1 3:1 X X X X X X X X X X X X X Adhesive Lined (Dual Wall) X X X X X X X Meets Military Specifications X X X X X X X X X X X Below Ground Application High Temp Applications (>250 F) X X Highly Chemical X X X Low Coefficient of Friction Cusm Cut Lengths X X X X X X X X X X Standard 6" pieces X X X X Standard 4' lengths X X X X X X X X X Small 25' Reels X X X X Large Reels X X X X X X UV X# X# X# X X X# X# X# X# X# X# X# X# Shrink Temperature 194 F 194 F 275 F 275 F 644 F 212 F 212 F 248 F 257 F 248 F 248 F 248 F 248 F 248 F Shelf Life (years) 5 5 5** Found on Page X *Black/Red **Excluding HSTTN300 which is 2 years. Except Clear ^Outer Wall Material Performance only # Black only 22 Order number of pieces required, multiples of Standard Package Quantity.

23 for Thin Wall Heat Shrink HSTT Q 10 Type HSTT HSTTV HSTTN HSTTK HSTTT HSTTP = Thin Wall = Thin Wall VW-1 = Thin Wall Neoprene = Thin Wall PVDF KYNAR = Thin Wall TFE = Thin Wall PVC HSTTPN = Crystal Clear Thin Wall PVC HSTTVA = Flexible Adhesive Lined HSTTRA = Semi-Rigid Adhesive Lined HSTTA = Thin Wall Adhesive Lined HSTT4A = 4:1 Thin Wall Adhesive Lined HST = Thick Wall Adhesive Lined HSEC = Heat Shrink End Caps i Adhesive Lined HSECFR = Heat Shrink End Caps Adhesive Lined Expanded Diameter 05 = 3/64" (1.2mm) 06 = 1/16" (1.6mm) 09 = 3/32" (2.4mm) 12 = 1/8" (3.2mm) 19 = 3/16" (4.8mm) 25 = 1/4" (6.4mm) 38 = 3/8" (9.5mm) 50 = 1/2" (12.7mm) 75 = 3/4" (19.1mm) 100 = 1" (25.4mm) 150 = 1 1/2" (38.1mm) 200 = 2" (50.8mm) 300 = 3" (76.2mm) 400 = 4" (101.6mm) 0.4 =.40" (10.2mm) 0.5 =.47" (11.9mm) 0.8 =.80" (20.3mm) 1.0 = 1.0" (25.4mm) 1.1 = 1.1" (27.9mm) 1.5 = 1.5" (38.1mm) 2.0 = 2.0" (50.8mm) 3.0 = 3.0" (76.2mm) 4.0 = 4.0" (101.6mm) Tube Length 3 = 3" (76.2mm) 6 = 6" (152.4mm) 9 = 9" (228.6mm) 12 = 12" (304.8mm) 48 = 48" (1.2m) NONE = REEL Package Quantity (If Tube Length Specified) 1 = 1 pc. 2 = 2 Pcs. 3 = 3 Pcs. 5 = 5 Pcs. X = 10 Pcs. Q = 25 Pcs. LQ = 75 Pcs. CQ = 125 Pcs. T = 200 Pcs. TL = 250 Pcs. Y = 6" Pcs. Reels (If No Tube Length Specified) Q = 25' (7.6m) L = 50' (15.2m) C = 100' (30.5m) T = 200' (61.0m) D = 500' (152.4m) M = 1000' (304.8m) For Standard Packages containing 6" (152.4mm) lengths, refer individual pages for complete part number offering. Note: The above information is be used as a guide. For specific part number offerings review individual pages for verification. KYNAR is a registered trademark of Afina Chemicals, Inc. TFE is Polytetrafluoroethylene material. Color NONE = Black C = Clear 2 = Red 4 = Yellow 5 = Green 6 = Blue 10 = White 45 = Yellow/ Green Ties For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 23

HSTT Heat Shrink 4 Foot Pieces and Reels Ties Applications include insulating, protecting, and color coding wires and cables Voltage: 600 V Shrink ratio: 2:1 Flammability: Flame retardant EXCEPT

24 HSTT Heat Shrink 4 Foot Pieces and Reels Ties Applications include insulating, protecting, and color coding wires and cables Voltage: 600 V Shrink ratio: 2:1 Flammability: Flame retardant EXCEPT clear UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 1 (Colors) Class 2 (Clear) Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Black cross-linked Polyolefin Min. Expanded Max. Recovered Recovered Wall Length Std Diameter Thickness Length per Reel Ctn. * In. mm In. mm In. mm In. mm Ft. m Ft. m HSTT05-48-Q HSTT05-48-TL HSTT05-C HSTT05-M HSTT06-48-Q HSTT06-48-TL HSTT06-C HSTT06-M HSTT09-48-Q HSTT09-48-TL HSTT09-C HSTT09-M HSTT12-48-Q HSTT12-48-TL HSTT12-C HSTT12-M HSTT19-48-Q HSTT19-48-TL HSTT19-C HSTT19-M HSTT25-48-Q HSTT25-48-TL HSTT25-C HSTT25-D HSTT38-48-Q HSTT38-48-TL HSTT38-C HSTT38-T *For colors, add C (Clear), 2 (Red), 4 (Yellow), 45 (Yellow/Green), 5 (Green), 6 (Blue) and 10 (White) end of part number. Part sold per reel 24 Order number of pieces required, multiples of Standard Package Quantity.

HSTT Heat Shrink 4 Foot Pieces and Reels (continued) Min. Expanded Max. Recovered Recovered Wall Length Std Diameter Thickness Length per Reel Ctn. * In. mm In. mm In. mm In. mm Ft. m Ft.

25 HSTT Heat Shrink 4 Foot Pieces and Reels (continued) Min. Expanded Max. Recovered Recovered Wall Length Std Diameter Thickness Length per Reel Ctn. * In. mm In. mm In. mm In. mm Ft. m Ft. m HSTT HSTT50-48-Q HSTT50-48-T HSTT50-C HSTT50-T HSTT HSTT75-48-CQ HSTT75-C HSTT75-T HSTT HSTT LQ HSTT100-C HSTT HSTT150-C HSTT HSTT200-L HSTT HSTT300-L HSTT HSTT400-L *For colors, add C (Clear), 2 (Red), 4 (Yellow), 45 (Yellow/Green), 5 (Green), 6 (Blue) and 10 (White) end of part number. Part sold per reel Ties HSTT Heat Shrink on 25 Foot Reels Applications include insulating and protecting wires and cables Voltage: 600 V Shrink ratio: 2:1 Flammability: Flame retardant EXCEPT clear UL Recognized, CSA Certified * For clear, add C end of part number. Mil Spec: AMS-DTL-23053/5 Class 1 (Black) Class 2 (Clear) Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Cross-linked Polyolefin Min. Max. Recovered Diameter Expanded Recovered Wall Thickness Ctn. * In. mm In. mm In. mm In. mm HSTT05-Q HSTT06-Q HSTT09-Q HSTT12-Q HSTT19-Q HSTT25-Q HSTT38-Q HSTT50-Q HSTT75-Q For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 25

Ties Heat Shrink in 6 Inch Pieces; Black, Single Diameter Applications include insulating, protecting, and color coding wires and cables Voltage: 600 V Shrink ratio: 2:1 Flammability: Flame retardant

26 Ties Heat Shrink in 6 Inch Pieces; Black, Single Diameter Applications include insulating, protecting, and color coding wires and cables Voltage: 600 V Shrink ratio: 2:1 Flammability: Flame retardant UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 1 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Cross-linked Polyolefin Min. Max. Recovered Diameter Expanded Recovered Wall Thickness Total No. Ctn. In. mm In. mm In. mm In. mm Pcs. HSTT06-Y HSTT09-Y HSTT12-Y HSTT19-Y HSTT25-Y HSTT38-Y HSTT50-Y HSTT75-Y HSTT100-Y Heat Shrink in 6 Inch Pieces; Multi-Color, Single Diameter Applications include insulating, protecting, and color coding wires and cables Voltage: 600 V Shrink ratio: 2:1 Flammability: Flame retardant EXCEPT clear UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 1 (Colors) Class 2 (Clear) Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Cross-linked Polyolefin Colors include: clear, red, yellow, green, blue and white Each Min. Max. Total Black Color Diameter Expanded Recovered No. No. of No. of Ctn. In. mm In. mm In. mm Pcs. Pieces Pieces HSTT06-YK HSTT09-YK HSTT12-YK HSTT19-YK HSTT25-YK HSTT38-YK HSTT50-YK HSTT75-YK HSTT100-YK Order number of pieces required, multiples of Standard Package Quantity.

Heat Shrink in 6 Inch Pieces; Black, Multiple Diameters Applications include insulating and protecting wires and cables Voltage: 600 V Shrink ratio: 2:1 UL Recognized, CSA Certified Diameter Mil

each 1/8", 1/16", 3/32", 1/4", 3/16", 3/8", 1/2" Total No. Pcs. Ctn. 14 1 10 Ties HSTT-YK2 Various Larger Range Two pcs.

27 Heat Shrink in 6 Inch Pieces; Black, Multiple Diameters Applications include insulating and protecting wires and cables Voltage: 600 V Shrink ratio: 2:1 UL Recognized, CSA Certified Diameter Mil Spec: AMS-DTL-23053/5 Class 1 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Cross-linked Polyolefin No. of Pieces by Diameter HSTT-YK1 Various Smaller Range Two pcs. each 1/8", 1/16", 3/32", 1/4", 3/16", 3/8", 1/2" Total No. Pcs. Ctn Ties HSTT-YK2 Various Larger Range Two pcs. each 3/8", 1/2", 3/4", 1" Heat Shrink in 6 Inch Pieces; Yellow/Green Stripe, Multiple Diameters Applications include insulating, protecting, and color coding wires and cables Voltage: 600 V Shrink ratio: 2:1 Flammability: Flame retardant UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 1 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Cross-linked Polyolefin Diameter No. of Pieces by Diameter HSTT-YK1-45 Various Smaller Range Two pcs. each 1/8", 3/16", 1/4", 3/8" Total No. Pcs. Ctn HSTT-YK2-45 Various Larger Range Two pcs. each 3/8", 1/2", 3/4" For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 27

Ties HSTTV Heat Shrink 4 Foot Pieces Applications include insulating and protecting wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized,

28 Ties HSTTV Heat Shrink 4 Foot Pieces Applications include insulating and protecting wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 3 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Black cross-linked Polyolefin Diameter Min. Expanded Max. Recovered Recovered Wall Thickness In. mm In. mm In. mm In. mm HSTTV05-48-Q HSTTV05-48-TL HSTTV06-48-Q HSTTV06-48-TL HSTTV09-48-Q HSTTV09-48-TL HSTTV12-48-Q HSTTV12-48-TL HSTTV19-48-Q HSTTV19-48-TL HSTTV25-48-Q HSTTV25-48-TL HSTTV38-48-Q HSTTV38-48-TL HSTTV50-48-Q HSTTV50-48-T HSTTV HSTTV75-48-CQ HSTTV HSTTV LQ HSTTV Ctn. 28 Order number of pieces required, in multiples of Standard Package Quantity.

HSTTV Heat Shrink on 100 Foot Reels Applications include insulating and protecting wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized,

29 HSTTV Heat Shrink on 100 Foot Reels Applications include insulating and protecting wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 3 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Black Cross-linked Polyolefin Ties *Green. Diameter Min. Expanded Max. Recovered Recovered Wall Thickness In. mm In. mm In. mm In. mm HSTTV05-C HSTTV06-C HSTTV09-C HSTTV12-C HSTTV19-C HSTTV25-C HSTTV38-C HSTTV50-C HSTTV75-C HSTTV100-C HSTTV100-C5* HSTTV150-C Ctn. For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 29

Ties HSTTV Heat Shrink on Bulk Reels Applications include insulating, protecting, and color coding wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1

30 Ties HSTTV Heat Shrink on Bulk Reels Applications include insulating, protecting, and color coding wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 3 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Cross-linked Polyolefin 30 Min. Max. Recovered Length Diameter Expanded Recovered Wall Thickness Per Reel Ctn. In. mm In. mm In. mm In. mm Ft. m Color HSTTV05-M Black 1 2 HSTTV05-M Red 1 2 HSTTV05-M Yellow 1 2 HSTTV05-M Blue 1 2 HSTTV06-M Black 1 2 HSTTV06-M Red 1 2 HSTTV06-M Yellow 1 2 HSTTV06-M Blue 1 2 HSTTV09-M Black 1 2 HSTTV09-M Red 1 2 HSTTV09-M Yellow 1 2 HSTTV09-M Blue 1 2 HSTTV12-M Black 1 2 HSTTV12-M Red 1 2 HSTTV12-M Yellow 1 2 HSTTV12-M Blue 1 2 HSTTV19-M Black 1 2 HSTTV19-M Red 1 2 HSTTV19-M Yellow 1 2 HSTTV19-M Blue 1 2 HSTTV25-D Black 1 2 HSTTV25-D Red 1 2 HSTTV25-D Yellow 1 2 HSTTV25-D Blue 1 2 HSTTV38-T Black 1 2 HSTTV38-T Red 1 2 HSTTV38-T Yellow 1 2 HSTTV38-T Blue 1 2 HSTTV50-T Black 1 2 HSTTV50-T Red 1 2 HSTTV50-T Yellow 1 2 HSTTV50-T Blue 1 2 HSTTV75-T Black 1 2 HSTTV75-T Red 1 2 HSTTV75-T Yellow 1 2 HSTTV75-T Blue 1 2 Order number of pieces required, multiples of Standard Package Quantity.

HSTTV Heat Shrink on 25 Foot Reels Applications include insulating and protecting wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 HSTTV Heat Shrink

Mil Spec: AMS-DTL-23053/5 Class 3 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Black cross-linked Polyolefin Min. Expanded Max. Recovered Recovered Wall Thickness In.

31 HSTTV Heat Shrink on 25 Foot Reels Applications include insulating and protecting wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 HSTTV Heat Shrink 6 Inch Pieces Applications include insulating and protecting wires and cables Fast shrink time Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 Diameter UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 3 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Black cross-linked Polyolefin Min. Expanded Max. Recovered Recovered Wall Thickness In. mm In. mm In. mm In. mm UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 3 Temperature range: -67 F 275 F (-55 C 135 C) For dry locations Material: Black cross-linked Polyolefin HSTTV05-Q HSTTV06-Q HSTTV09-Q HSTTV12-Q HSTTV19-Q HSTTV25-Q HSTTV38-Q HSTTV50-Q HSTTV75-Q HSTTV100-Q Ctn. Ties Diameter /Size Min. Expanded Max. Recovered In. mm In. mm In. mm Pieces Per Package HSTTV05-Y HSTTV06-Y HSTTV09-Y HSTTV12-Y HSTTV19-Y HSTTV25-Y HSTTV38-Y HSTTV50-Y HSTTV75-Y HSTTV100-Y Ctn. For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 31

Ties HSTTP PVC Heat Shrink Applications include insulating and protecting wires and cables Good resistance most fuels and oils Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL

32 Ties HSTTP PVC Heat Shrink Applications include insulating and protecting wires and cables Good resistance most fuels and oils Voltage: 600 V Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized, CSA Certified Temperature range: -4 F 221 F (-20 C 105 C) For dry locations Material: Black cross-linked Polyvinyl Chloride Mil Spec: AMS-DTL-23053/2 Class 1 32 Min. Max. Recovered Length Diameter Expanded Recovered Wall Thickness Per Reel Ctn. In. mm In. mm In. mm In. mm Ft. m HSTTP05-QY HSTTP05-CY HSTTP05-MY HSTTP06-QY HSTTP06-CY HSTTP06-MY HSTTP09-QY HSTTP09-CY HSTTP09-MY HSTTP12-QY HSTTP12-CY HSTTP12-MY HSTTP19-QY HSTTP19-CY HSTTP19-MY HSTTP25-QY HSTTP25-CY HSTTP25-DY HSTTP38-QY HSTTP38-CY HSTTP38-TY HSTTP50-QY HSTTP50-CY HSTTP75-QY HSTTP75-CY HSTTP100-QY HSTTP100-CY HSTTP150-QY HSTTP150-CY HSTTP200-QY Order number of pieces required, multiples of Standard Package Quantity.

HSTTPN Crystal Clear PVC Heat Shrink Low shrink temperature (sre below 90 F) speed installation Crystal clear material ensures easy read labels and splice inspections Voltage: 600 V Shrink ratio of

locations Material: Clear Polyvinyl Chloride Mil Spec: AMS-DTL-23053/2 Class 2 Ties Min. Expanded Recovered Wall Thickness Max. Recovered Length Diameter Length Per Reel Ctn. In. mm In. mm In. mm In. mm In. mm Ft.

33 HSTTPN Crystal Clear PVC Heat Shrink Low shrink temperature (sre below 90 F) speed installation Crystal clear material ensures easy read labels and splice inspections Voltage: 600 V Shrink ratio of 2:1 insulates a wide range of diameters and irregular shapes Highly flame retardant product manufactured from a material that is rated UL 224 VW-1 Temperature range: -4 F 221 F (-20 C 105 C) For dry locations Material: Clear Polyvinyl Chloride Mil Spec: AMS-DTL-23053/2 Class 2 Ties Min. Expanded Recovered Wall Thickness Max. Recovered Length Diameter Length Per Reel Ctn. In. mm In. mm In. mm In. mm In. mm Ft. m HSTTPN L HSTTPN Q HSTTPN Q HSTTPN Q HSTTPN Q HSTTPN X HSTTPN X HSTTPN50-CC HSTTPN62-CC HSTTPN75-CC HSTTPN100-CC HSTTPN150-CC HSTTPN200-CC HSTTN Neoprene Heat Shrink Applications include insulating, protecting, and color coding wires and cables Excellent chemical resistance especially fuels and oils Voltage: 600 V Shrink ratio: 2:1 Mil Spec: AMS-DTL-23053/1 Class 2 Temperature range: -94 F 250 F (-70 C 121 C) For dry locations Material: Black cross-linked Neoprene Min. Expanded Max. Recovered Recovered Wall Thickness Length Diameter per Reel Ctn. In. mm In. mm In. mm In. mm Ft. m HSTTN25-CY HSTTN38-CY HSTTN50-CY HSTTN63-CY HSTTN75-CY HSTTN88-CY HSTTN100-CY HSTTN125-CY HSTTN150-CY HSTTN175-CY HSTTN200-QY HSTTN300-QY For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 33

Ties TFE Heat Shrink 4 Foot Pieces Applications include insulating and protecting wires and cables Voltage: 600 V Shrink ratio: 2:1 Mil Spec: AMS-DTL-23053/12 Class 3 Temperature range: -88 F 482 F

34 Ties TFE Heat Shrink 4 Foot Pieces Applications include insulating and protecting wires and cables Voltage: 600 V Shrink ratio: 2:1 Mil Spec: AMS-DTL-23053/12 Class 3 Temperature range: -88 F 482 F (-67 C 250 C) Color: Opaque For dry locations Material: Polytetrafluoroethylene (TFE) High temperature; resists corrosive atmosphere See page 42 for shrink instructions Min. Expanded Max. Recovered Recovered Wall Thickness Diameter Length In. mm In. mm In. mm In. mm Ft. m HSTTT03-48-Q 30 AWG HSTTT04-48-Q 28 AWG HSTTT Q 26 AWG HSTTT05-48-Q 24 AWG HSTTT Q 22 AWG HSTTT06-48-Q 20 AWG HSTTT08-48-Q 18 AWG HSTTT09-48-Q 16 AWG HSTTT12-48-Q 14 AWG HSTTT15-48-Q 12 AWG HSTTT19-48-Q 10 AWG HSTTT24-48-Q 8 AWG HSTTT30-48-Q 6 AWG HSTTT37-48-Q 4 AWG HSTTT43-48-Q 2 AWG HSTTT47-48-Q 0 AWG HSTTT / HSTTT / HSTTT / HSTTT / HSTTT / HSTTT / HSTTT / Order number of pieces required, multiples of Standard Package Quantity.

HSTTK Kynar* Heat Shrink 4 Foot Pieces Applications include insulating and protecting wires and cables Mil Spec: AMS-DTL-23053/8 Excellent chemical and abrasion resistance Temperature range: -67 F

Meets UL 224 VW-1 Ties Min. Max. Recovered Recovered Diameter Expanded Wall Thickness In. mm In. mm In. mm In. mm HSTTK05-48-Q 0.046 1.2 0.046 1.2 0.023 0.6 0.010 0.3 25 HSTTK06-48-Q 0.063 1.6 0.063 1.6 0.031 0.

35 HSTTK Kynar* Heat Shrink 4 Foot Pieces Applications include insulating and protecting wires and cables Mil Spec: AMS-DTL-23053/8 Excellent chemical and abrasion resistance Temperature range: -67 F 347 F (-55 C 175 C) Use in high temperature or solvent rich environment For dry locations Voltage: 600 V Material: Clear Cross-linked Polyvinylidfene Fluoride (PVDF) Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 Ties Min. Max. Recovered Recovered Diameter Expanded Wall Thickness In. mm In. mm In. mm In. mm HSTTK05-48-Q HSTTK06-48-Q HSTTK09-48-Q HSTTK12-48-Q HSTTK19-48-Q HSTTK25-48-Q HSTTK38-48-Q HSTTK HSTTK HSTTK *KYNAR is a registered trademark of Afina Chemicals, Inc. HSTTVA Heat Shrink 4 Foot and 6 Inch Pieces Applications include insulating and protecting wires and cables Flexible tubing with an adhesive inner wall which seals and protects components from moisture and corrosion Voltage rating: 600 V Shrink ratio: 2:1 Flammability: Outer wall flame retardant Mil Spec: AMS-DTL-23053/4 Class 2 Temperature range: -67 F 230 F (-55 C 110 C) For damp locations Material: Adhesive lined black cross-linked Polyolefin Diameter Min. Expanded Max. Recovered Recovered Wall Thickness In. mm In. mm In. mm In. mm 4' (1.22m) Pieces HSTTVA12-48-Q HSTTVA19-48-Q HSTTVA25-48-Q HSTTVA38-48-Q HSTTVA HSTTVA HSTTVA HSTTVA Table continues on page 36 For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 35

36 Ties 36 HSTTVA Heat Shrink 4 Foot and 6 Inch Pieces (continued) Diameter Min. Expanded Max. Recovered Recovered Wall Thickness In. mm In. mm In. mm In. mm HSTTA Heat Shrink 4 Foot and 6 Inch Pieces Applications include insulating and protecting wires and cables Flexible tubing with an adhesive inner wall which seals and protects components from moisture and corrosion Voltage rating: 600 V Shrink ratio: 3:1 Flammability: Outer wall flame retardant Mil Spec: AMS-DTL-23053/4 Class 3 Temperature range: -67 F 230 F (-55 C 110 C) For damp locations Material: Adhesive lined black cross-linked Polyolefin Order number of pieces required, multiples of Standard Package Quantity. Pieces per Package 6" (152.4mm) Pieces HSTTVA12-Y HSTTVA19-Y HSTTVA25-Y HSTTVA38-Y HSTTVA50-Y HSTTVA75-Y HSTTVA100-Y Diameter Min. Expanded Max. Recovered Recovered Wall Thickness In. mm In. mm In. mm In. mm 4' (1.22m) Pieces HSTTA19-48-Q HSTTA25-48-Q HSTTA25-48-TL HSTTA38-48-Q HSTTA38-48-TL HSTTA HSTTA50-48-T HSTTA HSTTA75-48-C HSTTA HSTTA L HSTTA HSTTA Q Diameter Min. Expanded Max. Recovered Recovered Wall Thickness In. mm In. mm In. mm In. mm Ctn. Ctn. Pieces per Package 6" (152.4mm) Pieces HSTTA19-Y HSTTA25-Y HSTTA38-Y HSTTA50-Y HSTTA75-Y HSTTA100-Y HSTTA150-Y

HSTT4A Heat Shrink 4 Foot Pieces Applications include insulating and protecting oversized electrical and electronic components, cables, terminals and connecrs Flexible tubing with an adhesive inner

Temperature range: -67 F 257 F (-55 C 125 C) For damp locations Material: Adhesive lined black cross-linked Polyolefin Ties Min. Expanded Max. Recovered Recovered Wall Thickness Diameter Length In.

37 HSTT4A Heat Shrink 4 Foot Pieces Applications include insulating and protecting oversized electrical and electronic components, cables, terminals and connecrs Flexible tubing with an adhesive inner wall which seals and protects components from moisture and corrosion Voltage: 600 V Shrink ratio: 4:1 Flammability: Flame retardant outer wall meets UL 224 VW-1 Mil Spec: AMS-DTL-23053/4 Class 3 Temperature range: -67 F 257 F (-55 C 125 C) For damp locations Material: Adhesive lined black cross-linked Polyolefin Ties Min. Expanded Max. Recovered Recovered Wall Thickness Diameter Length In. mm In. mm In. mm In. mm Ft. m HSTT4A15-48-Q HSTT4A31-48-Q HSTT4A47-48-Q HSTT4A HSTT4A HSTT4A HSTT4A HSTTRA Heat Shrink 4 Foot Pieces Applications include insulating and protecting wires and cables Semi-rigid tubing with an adhesive inner wall seals and protects components from moisture and corrosion Voltage rating: 600 V Shrink ratio: 2.5:1 Minimum Mil Spec: AMS-DTL-23053/4 Class 1 Temperature range: -67 F 230 F (-55 C 110 C) For damp locations Material: Adhesive lined black cross-linked Polyolefin Min. Expanded Max. Recovered Recovered Wall Thickness Diameter In. mm In. mm In. mm In. mm HSTTRA12-48-Q HSTTRA19-48-Q HSTTRA25-48-Q HSTTRA38-48-Q HSTTRA HSTTRA HSTTRA For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 37

Thick Wall Polyolefin Heat Shrink Ties Applications include insulating and protecting wires and cables Adhesive-lined inner wall seals and protects against moisture Thick wall suitable for direct

38 Thick Wall Polyolefin Heat Shrink Ties Applications include insulating and protecting wires and cables Adhesive-lined inner wall seals and protects against moisture Thick wall suitable for direct burial according UL 486D and provides excellent protection Voltage rating: UL 486D Listed for 600 V 90 C continuous use Shrink ratio: 3:1 Flammability: Flame retardant outer wall meets UL 224 VW-1 UL Listed, UL Recognized and CSA Certified (Except HST3.0 and HST3.5) Mil Spec: AMS-DTL-23053/15 Temperature range: -67 F 230 F (-55 C 110 C) For wet locations Suitable for outdoor, direct sunlight applications (Black only) Material: Adhesive lined black and red cross-linked Polyolefin 38 Min. Expanded Max. Recovered Recovered Wall Thickness Length Ctn. In. mm In. mm In. mm In. mm HST0.4-3-Q2Y* HST0.4-3-QY* HST Y* HST Y* HST Y* HST0.4-6-X2Y* HST0.4-6-XY* HST Y* HST Y* HST Y* HST Y* HST Y* HST0.8-6-X2Y* HST0.8-6-XY* HST0.8-9-X2Y* HST0.8-9-XY* HST Y HST Y HST Y HST Y HST Y HST1.1-6-X2Y HST1.1-6-XY HST Y HST1.1-9-X2Y HST1.1-9-XY HST Y HST Y HST Y HST Y HST1.5-9-XY HST Y HST Y HST Y HST Y HST Y HST HST HST Y HST Y *Product meets performance requirements of AMS-DTL-23053/15; some dimensions differ from specification. Order number of pieces required, multiples of Standard Package Quantity.

Heat Shrink End Caps Applications include insulating and protecting wires and cables Adhesive lined inner wall seals and provides excellent protection against moisture Voltage rating of 600 V Shrink

5:1 (HSEC); 3:1 (HSECFR) Temperature range: -40 F 257 F (-40 C 125 C) HSEC -67 F 239 F (-55 C 110 C) HSECFR For wet locations Material: Adhesive lined black cross-linked Polyolefin; HSECFR = Flame

39 Heat Shrink End Caps Applications include insulating and protecting wires and cables Adhesive lined inner wall seals and provides excellent protection against moisture Voltage rating of 600 V Shrink ratio: 2.5:1 (HSEC); 3:1 (HSECFR) Temperature range: -40 F 257 F (-40 C 125 C) HSEC -67 F 239 F (-55 C 110 C) HSECFR For wet locations Material: Adhesive lined black cross-linked Polyolefin; HSECFR = Flame retardant Ties HSEC HSECFR Min. Expanded Max. Recovered Recovered Wall Thickness Cap Length Ctn. In. mm In. mm. In. mm In. mm HSEC0.5-X HSEC0.8-X HSE0-X HSE HSE HSE Heat Shrink End Caps HSECFR0.5-XY HSECFR0.8-XY HSECFR1.0-XY HSECFR1.5-5Y HSECFR2.0-5Y For technical assistance in the U.S., call (outside the U.S., see inside back cover for direcry) 39

Plastic Heat Shrink Tubing Kit Boxes For Dry Locations Ties Part Description Contents KP-HSTT1 KP-HSTT2 KP-HSTTA Heat shrink kit box plastic case, various sizes. Black only.

of 3/8",1/2" 35 ea. (5 ea. color) 3/32",1/8" 21 ea. (3 ea. color) 3/16",1/4" 7 ea. (1 ea. color) 3/8", 1/2" 14 ea. 3/16" 12 ea. 1/4" 10 ea. 3/8" 6 ea. 1/2" 3 ea. 3/4" 2 ea.

40 Plastic Heat Shrink Tubing Kit Boxes For Dry Locations Ties Part Description Contents KP-HSTT1 KP-HSTT2 KP-HSTTA Heat shrink kit box plastic case, various sizes. Black only. Heat shrink kit box plastic case, various sizes, various colors. Dual Wall Adhesive Lined Thin Wall Heat Shrink: Plastic Kit Box Black only. 35 ea. of 3/32",1/8" 21 ea. of 3/16",1/4" 7 ea. of 3/8",1/2" 35 ea. (5 ea. color) 3/32",1/8" 21 ea. (3 ea. color) 3/16",1/4" 7 ea. (1 ea. color) 3/8", 1/2" 14 ea. 3/16" 12 ea. 1/4" 10 ea. 3/8" 6 ea. 1/2" 3 ea. 3/4" 2 ea. 1" Heat Shrink Tools and Part Description Ctn. HSG-115V-650 Heat gun with stand. Temperature range of 650 F (343 C) F (482 C) plus stand. (Case and accessories not included). HSG-A1 Shrink tube reflecr for tubing up 3/4" inside diameter. Directs 1 10 heat around tubing reduce shrink time. HSG-A2 Shrink tube reflecr for tubing up 1 1/2" inside diameter Directs heat around tubing reduce shrink time. HSG-A4 Black polyethylene case sres heat gun, stand, and both 1 accessories. HSG-P1 Replacement brush / spring kit. 1 5 HSG-P2 Replacement switch 20 Amp. 1 5 HSG-P3 Replacement bearing kit. 1 5 HSG-P7 Replacement heat element Order number of pieces required, multiples of Standard Package Quantity.