3M Accessories EMI System 3705/3706 Series. Physical

Transcription

1 M ccessories EMI System 705/706 Series S Spring latch attachment allows quick, easy connect/ disconnect S Fits existing M connectors S Intra-cabinet grounding eliminates pigtails/drain wires and need for grounding clamps S Cast aluminum shell offers excellent ground for EMI/ ESD Date Modified:May 0, 200 Sheet 1 of 4 Physical Shell Material: Die Cast luminum lloy Plating: 200 µ [5.08µm ] Minimum Nickel Latch Material: Stainless Steel Cable Clamp Material: Copper lloy Plating: 75 µ [1.91µm ] Minimum Nickel Receptacle Insulation Material: Glass Filled Polyester (PT) Flammability Rating: UL 94-0 Ground Plate Material: Copper lloy Retaining Clip Material: Stainless Steel M is a trademark of M Company

2 M ccessories EMI System 705/706 Series Position C D E F [ 42.9 ] 1.50 [ 8.1 ] 0.9 [ 9.9 ] 1.26 [ 2.0 ] 1.65 [ 41.9 ] 0.5 [ 8.9 ] [ 50.5 ] 1.80 [ 45.7 ] 0.4 [ 10.9 ] 1.26 [ 2.0 ] 1.65 [ 41.9 ] 0.5 [ 8.9 ] [ 60.7 ] 2.20 [ 55.9 ] 0.47 [ 11.9 ] 1.2 [.5 ] 1.71 [ 4.4 ] 0.47 [ 11.9 ] [ 68. ] 2.50 [ 6.5 ] 0.51 [ 1.0 ] 1.2 [.5 ] 1.71 [ 4.4 ] 0.47 [ 11.9 ] [ 81.0 ] 2.80 [ 71.1 ] 0.59 [ 15.0 ] 1.8 [ 5.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ] [ 9.7 ].0 [ 8.8 ] 0.67 [ 17.0 ] 1.8 [ 5.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ] 4X R.18 [4.6] For 4 position and higher the shell thickness increases to the dashed line (See table Dim F)..4 [ 10.9 ] C See Note 1.5 [8.9] SeeNote2 4) F D E 5).4 [ 10.9 ] ) Notes: 1. Two Shell Halves: luminum lloy Die Casting, Plating-200 µ [5.0µm ] Nickel Min. 2. One Cable Clamp: Copper lloy, Plating 75 µ [ 2.0 µm ] Nickel Min.. Two Latches: Stainless Steel, Plating 100 µ [2.54µm ] Nickel Min. 4. Two Roundhead Screws: M x 0.5mm x 4mm long. 5. Two Flathead screws: M x 0.5mm x 6mm Long. Ordering Information Shell Kit 705-2XX Note: Wiremount Shell Kit to be used with respective Socket and Cable (Order Separately) Position: See Table Inch [mm] Tolerance Unless Noted Inch ±.1 ±.01 ±.005 [ ] for Reference only Sheet 2 of 4 M is a trademark of M Company

3 M ccessories EMI System 705/706 Series Position C D E [ 8.9 ] 1.98 [ 50.4 ] 2.6 [ 59.9 ] 1.41 [ 5.8 ] 1.79 [ 45.5 ] [ 46.5 ] 2.28 [ 58.0 ] 2.66 [ 67.5 ] 1.71 [ 4.4 ] 2.09 [ 5.1 ] [ 56.7 ] 2.69 [ 68.2 ].06 [ 77.7 ] 2.11 [ 5.6 ] 2.49 [ 6.2 ] [ 64. ] 2.98 [ 75.8 ].6 [ 85. ] 2.41 [ 61.2 ] 2.79 [ 70.9 ] 50.0 [ 77.0 ].48 [ 88.5 ].86 [ 98.0 ] 2.91 [ 7.9 ].7 [ 85.6 ] 60.5 [ 89.7 ].98 [ ] 4.6 [ ].41 [ 86.6 ].87 [ 98. ] C 2) 4X M X 0.5mm Threaded Inserts.40 Ref [ 10.2 ] (See Note 6) ) 4) SeeNote1.71 [ 18.0 ] 2X Stop.7 [9.4].70 [ 17.8 ].2 [8.1] D 5) E Notes: 1. One racket: PT, Flammability Rating: UL Two Ground Plates: Copper lloy, Plating--100 µ [ 2.54 µm ] Nickel Min.. Two Retaining Clips: Stainless Steel, Plating--100 µ [2.54µm ] Nickel Min. 4. Two Roundhead Screws: M x 6mm Long. 5. Two Roundhead Screws: M x 0.5mm x 10mm Long. (For use with Plug Connector). 6. This is the recommended distance from the inside of the panel to the front face of the Header or Plug. Ordering Information Receptacle Kit XX Position: See Table Note: Panel Mount Receptable Kit to be used with respective Plug or Header (Order Separately). Sheet of 4 M is a trademark of M Company

4 M ccessories EMI System 705/706 Series Recommended Panel Cut Out for Receptacle Kit..49 [ 12.4 ].1 [.] RFullTyp Position [ 45.8 ] 1.98 [ 50.4 ] [ 5.4 ] 2.28 [ 58.0 ] [ 6.6 ] 2.68 [ 68.2 ] [ 71.2 ] 2.98 [ 75.8 ] 50.0 [ 8.9 ].48 [ 88.5 ] [ 96.6 ].98 [ ].50 Min [ 12.7 ] R.008 Typ [0.20] R.06 Typ [1.60].75 Min [ 19.0 ] For use with: For use with: (Order Separately) 706 (Order Separately) 705 Mates with: Position Shell Kit Socket Cable Receptacle Kit Header Plug / X / X / X / X / X / X Note: Shell and Receptacle Kits are available. They consist of a complete Shell Kit and a complete Receptacle Kit for a respective pin count. Sheet 4 of 4 M is a trademark of M Company

5 Important Notice ll statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. efore using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. ny statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. M MKES NO OTHER WRRNTIES INCLUDING, UT NOT LIMITED TO, NY IMPLIED WRRNTY OF MERCHNTILITY OR FITNESS FOR PRTICULR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any loss or damage arising from this M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electronic and Division 6801 River Place lvd. ustin, TX M 200