LazrSPEED 150 LC Uniboot to MTRJ, ReadyPATCH Ruggedized Fanout, 36-Fiber, Plenum

Transcription

1 F0HLUMJAG LazrSPEED 150 LC Uniboot to MTRJ, ReadyPATCH Ruggedized Fanout, 36-Fiber, Plenum Product Classification Portfolio Brand Product Type Regional Availability Uniprise LazrSPEED ReadyPATCH Fiber fanout cable assembly North America Construction Materials Fiber Type OM2, bend insensitive Total Fibers, quantity 36 Fibers per Subunit, quantity 12 Furcation Color Aqua Dimensions Cord Length, maximum Cord Length, minimum Ordering Note 999 ft 999 m 3 m 8 ft For lengths greater than 999 ft (304 m), orders must be in meters Minimum length may vary based on cable configuration Environmental Specifications Environmental Space Plenum Operating Temperature -10 C to +60 C (+14 F to +140 F) General Specifications Interface, connector A Interface, connector B Color, connector A Color, connector B Construction Type Cord Configurator Interface Feature, connector A LC/UPC MTRJ/UPC Beige Black ReadyPATCH ruggedized fanout, indoor Yes Uniboot Mechanical Specifications Cable Retention Strength, maximum Regulatory Compliance/Certifications page 1 of 11 most current information. Revised: September 21, 2018

2 F0HLUMJAG Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system Included Products P-036-MP-5M-F12 (Product Component not not orderable) LazrSPEED Plenum MPO Trunk Cable, 36 fiber multi-unit unit with 12 fiber subunits CS-5M-MPMP (Product Component not not orderable) LazrSPEED 150 OM2+ Bend-Insensitive Multimode Fiber (Product Component not not orderable) TeraSPEED Pre-Radiused LC Connector duplex for 1.6 mm Fiber, single-mode (Product Component not not orderable) MTRJ 2 Fiber Connector for 3.0 mm Fiber, multimode, beige page 2 of 11 most current information. Revised: September 21, 2018

3 P-036-MP-5M-F12 LazrSPEED Plenum MPO Trunk Cable, 36 fiber multi-unit with 12 fiber subunits Product Classification Portfolio Product Type Regional Availability CommScope Fiber indoor cable Asia Australia/New Zealand EMEA Latin America North America Standards And Qualifications Cable Qualification Standards ANSI/ICEA S Telcordia GR-409 Representative Image General Specifications Cable Type Construction Type Subunit Type MPO trunk cable Non-armored Gel-free Construction Materials Fiber Type Solution OM2+, LazrSPEED 150 Total Fiber Count 36 Fiber Type OM2+, LazrSPEED 150 Fiber Type, quantity 36 Fibers per Subunit, quantity 12 Dimensions page 3 of 11 most current information. Revised: February 22, 2018

4 P-036-MP-5M-F12 Buffer Tube/Subunit Diameter 3.00 mm 0.12 in Cable Weight 50.0 lb/kft 75.0 kg/km Diameter Over Jacket 9.10 mm 0.36 in Subunit, quantity 3 Physical Specifications Minimum Bend Radius, loaded 13.6 cm 5.4 in Minimum Bend Radius, unloaded 9.1 cm 3.6 in Tensile Load, long term, maximum 400 N 90 lbf Tensile Load, short term, maximum 1335 N 300 lbf Vertical Rise, maximum m ft Flame Test Specifications Flame Test Listing NEC OFNP (ETL) and c(etl) Flame Test Method NFPA 262 Environmental Specifications Environmental Space Plenum Installation Temperature 0 C to +70 C (+32 F to +158 F) Operating Temperature 0 C to +70 C (+32 F to +158 F) Storage Temperature -40 C to +70 C (-40 F to +158 F) Mechanical Test Specifications Compression 10 N/mm 57 lb/in Compression Test Method FOTP-41 IEC E3 Flex 300 cycles Flex Test Method FOTP-104 IEC E6 Impact 0.55 ft lb 0.74 N-m Impact Test Method FOTP-25 IEC E4 Strain See long and short term tensile loads Strain Test Method FOTP-33 IEC E1 Twist 10 cycles Twist Test Method FOTP-85 IEC E7 Environmental Test Specifications Heat Age 0 C to +85 C (+32 F to +185 F) Heat Age Test Method IEC F9 Low High Bend 0 C to +70 C (+32 F to +158 F) page 4 of 11 most current information. Revised: February 22, 2018

5 P-036-MP-5M-F12 Low High Bend Test Method Temperature Cycle Temperature Cycle Test Method FOTP-37 IEC E11 0 C to +70 C (+32 F to +158 F) FOTP-3 IEC F1 Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system Included Products CS-5M-MPMP (Product Component not not orderable) LazrSPEED 150 OM2+ Bend-Insensitive Multimode Fiber * Footnotes Operating Temperature Specification applicable to non-terminated bulk fiber cable page 5 of 11 most current information. Revised: February 22, 2018

6 CS-5M-MP CS-5M-MP LazrSPEED 150 OM2+ Bend-Insensitive Multimode Fiber Product Classification Portfolio Product Type Regional Availability CommScope Optical fiber Asia Australia/New Zealand EMEA Latin America North America Optical Specifications, Wavelength Specific Standards Compliance Attenuation, maximum Index of Refraction TIA-492AAAB (OM2+) nm nm 1300 nm 850 nm 1 Gbps Ethernet Distance nm nm 10 Gbps Ethernet Distance nm nm Bandwidth, Laser, minimum Bandwidth, OFL, minimum Differential Mode Delay Backscatter Coefficient Physical Specifications Cladding Diameter µm Cladding Diameter Tolerance ±1.0 µm Cladding Non-Circularity, maximum 1.0 % Coating Diameter (Colored) 254 µm Coating Diameter (Uncolored) 245 µm Coating Diameter Tolerance (Colored) ±7 µm Coating Diameter Tolerance (Uncolored) ±10 µm Coating/Cladding Concentricity Error, maximum 12 µm Core Diameter 50.0 µm Core Diameter Tolerance ±2.5 µm Core/Clad Offset, maximum 1.5 µm nm nm nm nm nm nm nm nm page 6 of 11 most current information. Revised: December 13, 2017

7 CS-5M-MP CS-5M-MP Optical Specifications, General Numerical Aperture Numerical Aperture Tolerance ±0.015 Point Defects, maximum Zero Dispersion Slope, maximum Zero Dispersion Wavelength, maximum Zero Dispersion Wavelength, minimum Mechanical Specifications Coating Strip Force, maximum Coating Strip Force, minimum Dynamic Fatigue Parameter, minimum 18 Macrobending, 15 mm mandrel, 2 turns Macrobending, 30 mm mandrel, 2 turns Macrobending, 75 mm mandrel, 100 turns Proof Test Environmental Specifications Regulatory Compliance/Certifications * Footnotes 0.15 db ps/[km-nm-nm] 1316 nm 1297 nm 8.9 N 2.0 lbf 1.3 N 0.3 lbf nm nm nm nm nm nm N/mm² psi Heat Aging, maximum C Temperature Dependence, maximum Temperature Humidity Cycling, maximum 0.10 db/km 0.20 db/km Water Immersion, maximum C Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system Temperature Dependence, maximum Temperature dependence is conducted at -60 C to +85 C (-76 F to +185 F) Temperature Humidity Cycling, maximum Temperature humidity cycling is conducted at -10 C to +85 C (+14 F to +185 F) up to 95% relative humidity page 7 of 11 most current information. Revised: December 13, 2017

8 TeraSPEED Pre-Radiused LC Connector duplex for 1.6 mm Fiber, single-mode Product Classification Portfolio Brand Product Type Regional Availability Construction Materials Fiber Type Ferrule Geometry Ferrule Material Dimensions Compatible Cable Diameter Length CommScope TeraSPEED Fiber connector Asia Australia/New Zealand EMEA Latin America North America G.652.D and G.657.A1, TeraSPEED OS2 Pre-radiused Zirconia 1.6 mm 0.1 in mm 1.98 in General Specifications Interface Body Style Interface Feature Color Package Quantity 2 Mechanical Specifications LC Duplex Standard Blue Cable Retention Strength, maximum Optical Performance Insertion Loss, maximum Return Loss, minimum Optical Specifications Optical Components Standard 0.34 db 50.0 db ANSI/TIA-568-C.3 Regulatory Compliance/Certifications Agency Classification page 8 of 11 most current information. Revised: November 16, 2018

9 RoHS 2011/65/EU ISO 9001:2008 Compliant Designed, manufactured and/or distributed under this quality management system page 9 of 11 most current information. Revised: November 16, 2018

10 MTRJ 2 Fiber Connector for 3.0 mm Fiber, multimode, beige Product Classification Portfolio Product Type Regional Availability Construction Materials Ferrule Geometry Ferrule Material Fiber Mode Dimensions Compatible Cable Diameter Length CommScope Fiber connector Asia Australia/New Zealand EMEA Latin America North America Flat Polymer Multimode 3.0 mm 0.1 in mm 1.95 in General Specifications Interface Body Style Interface Feature Color Package Quantity 1 Mechanical Specifications MTRJ 2-fiber Standard Beige Cable Retention Strength, maximum Optical Performance Insertion Loss, typical Return Loss, minimum Optical Specifications Optical Components Standard 0.30 db 20.0 db ANSI/TIA-568-C.3 Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system page 10 of 11 most current information. Revised: February 27, 2018

11 page 11 of 11 most current information. Revised: February 27, 2018