Recycling Passport. Device: Pump X-am 125 Mark II Issued: Producer information. 2. Product identification.

Transcription

1 Recycling Passport Device: Pump X-am 125 Mark II Issued: Producer information Name: Address: Web page: Dräger Safety AG & Co. KGaA Revalstr. 1 D Lübeck Germany 2. Product identification Product name: Model number: WEEE device category: Pump X-am 125 Mark II, Dräger X-am 1/2/5000 external pump / n05 Product description: Pump for X-am 2500/5000/5600 Total weight [kg]: 0,190 Dimensions H x W x D [cm] : 5,6 x 3,5 x 15,0 RoHS conformity: Yes WARNING: This device may be contagioned because of its former use. The last device owner has to sanitize the device before transferring it to the waste management enterprise. He has to certify the desinfection in written to the waste management enterprise. In case of indication of contagioned devices/components, special safety measures are required and a specialist has to be involved immediately. Existing hoses and anesthesia bags have to be removed before recycling process. 1 / 5

2 3. Directions for disassembling parts/materials/substances Installation location (no.) weight [kg] Important hints (properties, tools for disassembling) 3.1 Hazardous parts and components for removing and separate treatment printed circuit boards larger than 10 cm² 1 0,012 1x Subtotal weight: 0, Parts/components interfering with the recycling process Subtotal weight: 0, Homogeneous parts/components which may be disassembled with added value and potentially generate proceeds Screw (4x) 2 0,001 Steel Screw (3x) 3 0,001 Steel Rubber (1x) 4 0,002 Elastomer Housing bottom (1x) 5 0,019 Thermoplastic / PC ABS Tubes (2x) 6 0,003 Elastomer Subtotal weight: 0,026 Total weight of all parts for separation: (=sum of categories ) 0,038 kg 2 / 5

3 4. Materials which remain after the preliminary separation Substances Weight [kg] Iron, iron alloys Iron (alloys and its compounds) Cast and sintered irons Non-iron-metals and alloys and compounds Aluminum (alloys and its compounds) Chromium (alloys and its compounds) Copper (alloys and its compounds) Lithium (alloys and its compounds) Molybdenum (alloys and its compounds) Nickel (alloys and its compounds) Silica (alloys and its compounds) Tin (alloys and its compounds) Titanium (alloys and its compounds) Zinc (alloys and its compounds) Precious metals and precious metal alloys Gold (alloys and its compounds) Platinum (alloys and its compounds) Silver (alloys and its compounds) Inorganic materials, ceramics Metallic and oxide glasses Ceramic materials Synthetic mineral fibers Silicate materials Plastics Thermoplastic Thermosetting plastics Elastomers Others Pump 0,019 Housing top with moulded battery 0,126 Total weight of materials which remain after the preliminary separation: Total weight device [kg]: 0,145 kg 0,183 kg 3 / 5

4 5. Installation location of parts/materials mentioned in categories Several significant figures with corresponding numbers for the parts/materials in categories column 2 Legal disclaimer: Every effort has been made to provide accurate information at the date of publication of this document. It is provided for information only. Draeger Medical therefore does not assume any legal warranty for any error or any consequences which may arise from the use of this information. 4 / 5

5 Disassembly instruction disassemble the clip remove cover: unloose 4 x screws lift the cover you have now access to all components remove cables (1) remove insulating hose (2) shell remove seal out of the housing remove pump and hoses out of the housing remove the nut screw and serrated washer remove the filter system 2 1 unloose 3x screw remove circuit board out of the cover 5 / 5