RT 100 Al. Strong in aluminium GÜHRING YOUR WORLDWIDE PARTNER

Transcription

1 Strong in aluminium cost-effective drilling of aluminium-, copper-, brass- and bronze-alloys as well as plastics entire material range from soft and tough non ferrous alloys to brittle aluminium alloys RT 100 Al GÜHRING YOUR WORLDWIDE PARTNER

2 GÜHRING S NEW SOLID CARBIDE DRILL for the machining of aluminium-, copper-, brass- and bronze-alloys as well as plastics For non-ferrous metal machining chip formation with chip evacuation are both of vital importance. With RT 100 Al optimal chip formation is achieved at the cutting edge in the entire material range from tough aluminium wrought alloys to aluminium cast alloys with high silicon content. This results in a reliable chip evacuation. RT 100 Al distinguishes itself thanks to an ideal geometry with high surface finish qualities in the web thinning, front face and clearance rake areas. Micro-treated cutting edges and corners complement the point geometry and ensure perfect cutting behaviour, low process temperatures prevent the formation of built-up edges when machining non-ferrous metals.

3 Open point geometry and concave cutting edge form for optimal chip formation. Sharp, micro-treated cutting edges for perfect cutting behaviour, also in heat-treated AlSi-alloys. Thanks to the extremely high surface finish quality of the web thinning, front face and clearance rake areas the process temperatures are significantly reduced. Preventing formation of built-up edges. The tools are designed with a bright finish. Specially manufactured carbide grades for the machining of non-ferrous metals. The polished flute geometry of the RT 100 Al minimises the friction and guarantees a reliable chip evacuation. Prevention of material adhesion. HA shank to DIN Special dimensions, step and MQL tools are available on request.

4 Ratio drills with internal coolant RT 100 Al DIN 6537 L m7 P relieved cone main cutting edge is slightly concave optimised cutting geometry sharp cutting edges M K N aluminium and Al-alloys Al materials with high Si-content S H Tool material Surface Shank form Solid carbide HA NEW d2 d1 l 3 l 2 l 1 Article no Discount group 155 Cutting direction R d1 d2 l1 l2 l3 mm inch mm mm mm mm Availability / / / / / / /

5 Article no Discount group 155 Cutting direction R d1 d2 l1 l2 l3 mm inch mm mm mm mm Availability / / / / / / / / / / /

6 Article no Discount group 155 Cutting direction R d1 d2 l1 l2 l3 mm inch mm mm mm mm Availability / / / / / /

7 Article no Discount group 155 Cutting direction R d1 d2 l1 l2 l3 mm inch mm mm mm mm Availability /

8 RT 100 Al Tools with bold feed column no. are preferred choice. To select the optimal tool and the recommended machining parameters for your application, please also use the electronic version of the GuhringNavigator on the internet: Article no. Standard/DIN Tool material Type Surface finish Cooling Feed column no. Drill Ø mm f (mm/rev.) Coolant: Air Neat oil Soluble oil Material group Material examples Figures in bold = material no. to DIN EN Tensile strength N/mm 2 Hardness Coolant Common structural steels Free-cutting steels Unalloyed heat-treatable steels Alloyed heat-treatable steels Unalloyed case hard. steels Alloyed case hardened steels Nitriding steels Tool steels High speed steels S185(St33), P275N(StE285), P235GH(H1), P265GH(H2) E295 (St50-2), E360 (St70-2), P500NH (WStE500) SMnPb30 (9SMnPb28), SMn37 (9SMn36) S20 (45S20), (60S20), SPb20 (45SPb20) C22, C30E (Ck30) C45, C45E (Ck45) C60, C60E (Ck60) MnSi4, Cr2, Cr NiCr6, Cr4, CrMo (C10), C10E (Ck10) CrMo11, MnSi NiCr13, MnCr5, CrMo CrAl CrMoV9, CrAlNi C75W, Cr6, CrMoV X210Cr12, X42Cr13, WCr6, X45NiCrMo S , S 6-5-2, S Spring steels Hardened steels Si7, Cr3, CrV4 (51CrV4) 350 HB 48 HRC 66 HRC Stainless steels, sulphured austenitic martensitic X12CrS13, X14CrMoS17, X6CrMoS17, X8CrNiS X5CrNi18-10 (V2A), X6CrNiTi18-10, X6CrNiMoTi (V4A) X20CrNi172 (X17CrNi16-2), X39CrMo17-1, X2CrMoTi Cast iron Spheroidal graphite iron and malleable cast iron Chilled cast iron New cast materials GGV EN-GJL-100 (GG10), EN-GJL-200 (GG20) EN-GJL-250 (GG25), EN-GJL-350 (GG35) EN-GJS (GGG50), EN-GJMW (GTW35) EN-GJS (GGG70), EN-GJMB (GTS70) EN-GJV250 (GGV25), EN-GJV350 (GGV35) EN-GJV400 (GGV40), EN-GJV500 (GGV50), SiMo HB 350 HB 240 HB 350 HB 350 HB 220 HB 300 HB New cast materials ADI Special alloys Ti and Ti-alloys Aluminium and Al-alloys Al wrought alloys Al cast alloys 10 % Si 24 % Si Magnesium alloys Copper, low-alloyed Brass, short-chipping long-chipping Bronze, short-chipping Bronze, long-chipping Duroplastics Thermoplastics Kevlar Glass, carbon concentr. plastics EN-GJS (ADI800), EN-GJS (ADI1000) EN-GJS (ADI1200), EN-GJS (ADI1400) Nimonic, Inconel, Monel, Hastelloy Ti99,5, TiAl5Sn2,5, TiCu TiAl6Zr5, TiAl6V4, TiAl4Mo4Sn2,5, - TiAl8Mo1V Al99,5, AlMgSi1, AlMg AlMgSiPb, AlCuMg1, AlMg3Si, AlZnMgCu1, G-AlSi5Cu1, G-AlSi7Cu3, G-AlSi G-AlSi12, G-AlSi12Cu, - G-AlSi12CuNiMg MgMn2, G-MgAl8Zn1, G-MgAl6Zn SE-Cu, CuSn6, G-CuSn5ZnPb CuZn39Pb2, CuZn39Pb3, CuZn43Pb CuZn20, CuZn33, CuZn37Pb0, CuSn7ZnPb, CuPb5Sn5, CuPb10Sn CuNi18Zn19Pb CuAl5, CuAl9Mn, CuSn CuAl11Ni, CuBe2 Epoxy resin, Resopal, Pertinax, Moltopren Plexiglass, Hostalen, Novodur, Makralon Kevlar GFK/CFK

9 RT 100 Al L Solid carbide RT 100 Al axial GM 300 v c m/min Feed column no Toolholders and clamping devices for every application

10 Gühring s tool dispensing systems TM 326, TM 426 and TM 526 optimise your tool storage and your tool management. Gain increased security of your tool stock and increase the transparency of your tool management!

11 Gühring Tool Management Software

12 Milling Drilling Tapping/Thread milling/ Fluteless tapping Countersinking Reaming PCD Services Modular systems Special solutions Grooving systems /18091-VII-09 Printed in Germany 2018 P.O. Box Albstadt Herderstrasse Albstadt T F info@guehring.de No liability can be accepted for printing errors or technical changes of any kind. Our Conditions of Sale and Terms of Payment apply. Available on request.