Terwin Ultra-MAX Series Melt Pressure / Temperature. Transducers and Transmitters. Features: Benefits:

Transcription

1 Terwin Ultra-MX Series Melt Pressure / Temperature Quality re Our No.1 Priority eatures: Safe non-toxic Ultra-MX fill material. Low cost. Proven sensor design. High performance. ccuracy better than ±0.5%. N oated xtru- Max diaphragm as standard. eaturing the unique Ultra-MX high temperature liquid metal alloy fill material which is completely safe, non-toxic, non-flammable & suitable for process temperatures up to 450 / 842. escription: Internal 80% negative shunt calibration. ompatible with most competitor models The Terwin Ultra-MX Series melt pressure / temperature transducers / transmitters utilise hydraulic transmission between the sensing diaphragm that is in contact with the melt and the strain gauge assembly that produces an electrical output. Models are available with either nominal 3.33mV/V output (transducer), 4-20m or 0-10V (transmitter) conditioned outputs. ll outputs utilise industry standard 80% calibration. vailable pressure ranges are 500psi through 0-30,000psi (0-50 bar through 2,000 bar). Other units of pressure measurement, such as kg/cm² or MPa etc., are available if required. Standard thread size is ½ -20UN, however optional uropean sizes such as M12 x 1.5mm, M14 x 1.5mm, M18 x 1.5mm, M22 x 1.5mm and Japanese sizes P3/8 (G3/8) and P3/4 (G3/4) are also available. vailable with a selection of stem lengths: 3, 6, 9, 12, 15 & 18. enefits: Suitable for process temperatures up to 450 / 842 Superior abrasion & corrosion resistance Reliable, repeatable pressure measurement Wide variety of pressure ranges Optional stems lengths Optional thread sizes lectrically and mechanically compatible with most other brands. Transmitters now available with UTO ZRO option. Terwin Instruments Ltd, Winterbeck Industrial state, Orston Lane, OTTSOR, Nottinghamshire, NG13 0U UK T:\Terwin Templates\Sales ata Sheets etc\nw atalogue\ultra-mx\ultra-mx Series (Page 1) (a).docx

2 MOL UM3 MOL UM4 MOL UM1 16mm / 20mm / 45 L Terwin Ultra-MX Series Melt Pressure / Temperature Quality re Our No.1 Priority Terwin Ultra-MX Series Standard imensions: imensions: Mm s (inches) 7.77±0.03 (0.306±0.001) R Temperature Sensor onnector "Z" 10.49±0.03 (0.413±0.001) 5.43±0.127 (0.214±0.005) Y G H J K K M N P (0.450) (0.609) 33.0 (1.30) G 23.0 (0.905) H 80.0 (3.15) J 12.0 (0.47) K 470 (18.5) L 28.5 (1.12) M 13.0 (0.51) N 23.0 (0.90) P (7.87) R 37.5 (1.47) Thread Size "X" X 1/2-20UN-2 Y (6.0) Z J I/ Grounded Terwin Instruments Ltd, Winterbeck Industrial state, Orston Lane, OTTSOR, Nottinghamshire, NG13 0U UK T:\Terwin Templates\Sales ata Sheets etc\nw atalogue\ultra-mx\ultra-mx Series (Page 2) (a).docx

3 Terwin Ultra-MX Series Melt Pressure / Temperature Quality re Our No.1 Priority Terwin Ultra-MX Series onnectors: onnectors for mv/v output transducers. 6-pin bayonet connector (standard) Type PT P or equivalent. Terwin Type: 8-pin threaded connector (optional) Type P P or equivalent. Terwin Type: 8 G H 8 onnectors for 4-20m or 0-10V transmitters. 6-pin bayonet connector (standard), Type PT P or equivalent, Terwin Type:. Zero (Z) adjust potentiometer Standard Manual djust Transmitter Optional UTO ZRO Transmitter UTO Zero () button Span () 80% L adjust potentiometer Z Note: 8 8-pin threaded connectors are NOT available on 4-20m or 0-10V pressure transmitters. Terwin Instruments Ltd, Winterbeck Industrial state, Orston Lane, OTTSOR, Nottinghamshire, NG13 0U UK T:\Terwin Templates\Sales ata Sheets etc\nw atalogue\ultra-mx\ultra-mx Series (Page 3) (a).docx

4 Terwin Ultra-MX Series Melt Pressure / Temperature Quality re Our No.1 Priority onnectors: Mating onnectors: 6-pin strain relief connector (standard) Type PT S (SR) or equivalent. Terwin Type: -SR 8-pin strain relief connector (optional) Type P S (SR) or equivalent. Terwin Type: 8-SR Integral Temperature Sensor onnectors: Standard Male & emale Thermocouple onnectors Type J I/ (standard) Optional type K / Optional 3-wire PT100 Integral Temperature Sensor Pin male connector (fitted to sensor) 3-wire PT100 connections: Red = 3 & 1 White = 2 Mating 3-Pin female connector (supplied with sensor) Terwin Instruments Ltd, Winterbeck Industrial state, Orston Lane, OTTSOR, Nottinghamshire, NG13 0U UK T:\Terwin Templates\Sales ata Sheets etc\nw atalogue\ultra-mx\ultra-mx Series (Page 4) (a).docx

5 Terwin Ultra-MX Series Melt Pressure / Temperature Quality re Our No.1 Priority Specifications: vailable pressure ranges: Pressure transducers: Standard output 3.33mV/V psi to 0-30,000 bar 0-50 to 0-2,000 Pressure transmitters: Standard output 4-20m or 0-10V psi to 0-30,000 bar 0-35 to 0-2,000 Standard pressure ranges: psi g 0-1, , , , , ,000 bar g ,000 ombined error: Standard pressure ranges: Non-standard pressure ranges: 0.50%.S.O. (optional 0.25%) 1.00%.S.O. (optional 0.50%) Repeatability: 0.1%.S.O. Resolution: Infinite 2 x full scale or 25,000psi (1,700 bar), whichever is less. Maximum pressure: On 30,000psi (2,000 bar) sensors, the maximum is 35,000psi (2,400bar) ody material: 304 stainless steel iaphragm material: Terwin xtru-max Inconel 718 diaphragm with N coating for ultimate abrasion and corrosion resistance. Mounting torque: 20ft Ibs (27Nm) (240inch/Ibs) ill materials: Terwin Ultra-MX high temperature liquid metal alloy. pprovals:, RoHS, Maximum diaphragm temperature: 450 (842 ) (or even higher temperature applications, please see our Ultra-MX-HT Series.) Thread sizes: Standard Outputs: xcitation: onfiguration: ½ -20UN-2 (standard) Maximum gauge / electronics temperature: ridge resistance: 350Ω ±10% Insulation resistance: Zero balance: Internal Shunt alibration: 80%.S.O. ±0.10% M12 x 1.5mm M14 x 1.5mm M18 x 1.5mm M22 x 1.5mm P3/8 (G3/8) P3/4 (G3/4) 3.33mV/V ±10% 2-wire 4-20m 4-wire 0-10V 5-12V 15-30V our-arm bonded foil Wheatstone bridge strain gauge 121 (250 ) 85 (185 ) 1KMΩ@50V ±10%.S.O. Zero shift due to temperature change: <0.02%.S.O./ (<0.01%.S.O./ ) Span shift due to temperature change: <0.02%.S.O./ (<0.01%.S.O./ ) lectrical connections: Integral temperature sensors: (model UM4 only) 6-pin bayonet PT P or equivalent. (standard) 8 8-pin threaded PT P or equivalent (optional) 100MΩ@50V ±10%.S.O. a) djustable by accessible potentiometer. b) Using the uto Zero button or remotely wired switch on the uto Zero versions. ½ -14NPT threaded adaptor with direct cable outlet. (optional) Thermocouple J I/ (standard) Thermocouple K / (optional) 3-wire PT100 (optional) Terwin Instruments Ltd, Winterbeck Industrial state, Orston Lane, OTTSOR, Nottinghamshire, NG13 0U UK T:\Terwin Templates\Sales ata Sheets etc\nw atalogue\5000 Series\2017\5000 Series (Page 5) (a).docx

6 Terwin Ultra-MX Series Melt Pressure / Temperature Quality re Our No.1 Priority Ordering odes: ode: xample: G - H - J - K - L UM J M - - M18 - Model ode Rigid Stem 1 Rigid Stem + lexible apillary 3 Rigid Stem + lexible apillary + Integral Temperature Sensor uto Zero unction (transmitters only) ode Not fitted itted Rigid Stem Length: 4 Left blank ode 3 inches (76.2mm) 3 6 inches (152.4mm) (standard) 6 9 inches (228.6mm) 9 12 inches (305mm) inches (457mm) 18 Pressure Output Signal: 2.0mV/V T ode M2 2.5mV/V M mV/V 3.33mV/V (standard) 4-20m (2-wire loop + calibration pair) 0-10V (4-wire + calibration pair) Temperature Sensor Model UM4 ONLY: None J I/ (standard) K / PT100 (3-wire) rmoured apillary Length Models ONLY: None (model 51 only) M3 M V T ode X J K P T ode 18 inches (457mm) (standard) inches etc. 30 onnector Type: 6-pin bayonet (PT P) (Standard) 8-pin threaded (P P) ½ -14NPT threaded process with 2 metre flying leads. or Intrinsically safe applications. ONLY available with 2-wire 4-20m output. Y ode G 8 NPT2 T Pressure Range: 0 (zero to) psi g ode H bar g ode H 500 psi 5 35 bar psi bar 50 1,000 psi 1M 70 bar 70 1,500 psi 1M5 100 bar 100 3,000 psi 3M 200 bar 200 5,000 psi 5M 350 bar 350 7,500 psi 7M5 500 bar ,000 psi 10M 700 bar ,000 psi 15M 1,000 bar ,000 psi 20M 1,500 bar ,000 psi 30M 2,000 bar 2000 Other - contact sales ccuracy: 0.5% (standard on ranges 1,500psi to 15,000psi or 100 bar to 1,000 bar) 0.25% (available to special order on ranges 1,500psi to 15,000 psi or 100 bar to 1,000 bar) Thread Size: ½ -20UN-2 (standard) M12 x 1.5mm M14 x 1.5mm M18 x 1.5mm M22 x 1.5mm T ode J ode K Left blank M12 M14 M18 M22 P3/8 (G3/8) G3/8 P3/4 (G3/4) G3/4 Other - contact sales Special ode: None ode to be issued by factory T ode L Left blank SP0XXX Terwin Instruments Ltd, Winterbeck Industrial state, Orston Lane, OTTSOR, Nottinghamshire, NG13 0U UK T:\Terwin Templates\Sales ata Sheets etc\nw atalogue\ultra-mx\ultra-mx Series (Page 6) (a).docx