PRODUCT HIGHLIGHTS. The Grades. Cutting tool materials suitable for universal use WPV10 (ISO P10) FV5: Finishing ISO M (Stainless Steel)

Transcription

1 /20 FOR A LIMITED TIME SAVE 25% ON WALTER'S NEW ECONOMICAL ERFORM TURNING LINE! STARTING FROM $6.27 ER INSERT! E R F O R M TURNING INSERTS RODUCT HIGHLIGHTS Eicient machining with poven technology Fo vesatile and eliable use in many dieent mateials Fo long tool lie at cutting speeds up to 750 sm Excellent poduct quality- Made by Walte Extemely wea-esistant CVD coating with a wide ield o applications Light-coloed decoative inish o easy wea detection Vesatile Indexable Insets o an extemely wide ange o mateials and applications Aeas o use: Geneal mechanical engineeing, low volume poduction and othe industies imay Application The Gades The Geometies ISO (Steel) Cutting tool mateials suitable o univesal use Wide ange o applications and simple geomety selection Seconday Application (ISO 10) FV5: Finishing ISO M (Stainless Steel) (ISO 20) MV5: Medium machining ISO K (Cast Ion) RV5: Roughing Only Negative basic shapes available: CNMG, DNMG, SNMG, TNMG, VNMG, WNMG lease note: must be odeed in 10pc packages THE BEST START HERE

2 oduct expetise EXERTISE IN MACHINING Walte eom line eicient, eliable, vesatile. Tuning

3 ERFORM LINE TURNING ISO Vesatile tied-and-tested technology. THE ALICATION Vesatile indexable insets o an extemely wide ange o mateials and applications Aeas o use: Geneal mechanical engineeing, single-pat poduction and othe industies imay application: ISO (steels) Seconday application: ISO M (stainless steels) ISO K (cast ion wokpieces) THE GRADES Cutting tool mateials suitable o univesal use (ISO 10) (ISO 20) THE GEOMETRIES Wide ange o applications and simple geomety selection FV5: Finishing MV5: Medium machining RV5: Roughing Negative basic shapes: CNMG, DNMG, SNMG, TNMG, VNMG, WNMG Extemely wea-esistant CVD coating with a wide application ange Light-coloued inish o easy wea detection Geometies o a divese ange o applications (FV5, MV5, RV5) Gades:, Fig.: MV5 geomety BENEFITS FOR YOU Eicient machining with tied-and-tested technology Fo vesatile and eliable use in many dieent mateials Fo a long tool lie at cutting speeds up to 820 SFM Excellent poduct quality Made by Walte 2

4 Geomety oveview: Negative basic shape Gade oveview: ISO [] Depth o cut FV5 RV5 MV5 Wea esistance good medium unavouable eom line eom line [] Feed ate Toughness Cutting speed selection based on tensile stength/hadness: Cutting speed v c [sm] Binell hadness [HB] Tensile stength [ksi] Basis: = Cutting speed ange o selected mateials: ISO mateial goup Mateial Tensile stength Binell hadness Cutting speed 2 AISI 1015 (St37), ASTM ,500 psi 150 HB sm sm 7 ASTM A295 (52100), AISI ,030 psi 240 HB sm sm 9 ASTM A ,300 psi 370 HB sm sm 3

5 ERFORM LINE TURNING ISO Eicient, eliable, vesatile. The Walte eom line tuning insets stands out pimaily due to thei vesatile application ange. The indexable insets o the Walte eom line ae easily identiied by the V in the designation: It stands o vesatile. Simple geomety designation: Simple gade designation: M V : Chip beaking ange e.g. M = Medium machining 2: Mateials = Vesatile 3: Feed/chip beaking ange W V : Walte 2: Fist pimay application e.g. = ISO 3: Second pimay application, Vesatile 4: ISO application ange The cutting tool mateials ae specially developed o use on multiple mateials. Fo example, the cutting tool mateial can be used on steel, as well as on cast ion and stainless mateials. Example: WNMG432-MV5 4

6 ISO tuning Negative hombic 80 CNMG d 80 l s Indexable insets ANSI Desciption Desciption CNMG431-FV5 CNMG FV a b CNMG432-FV5 CNMG FV a b CNMG431-MV5 CNMG MV a b CNMG432-MV5 CNMG MV a b CNMG433-MV5 CNMG MV a b CNMG543-MV5 CNMG MV a b CNMG432-RV5 CNMG RV a b CNMG433-RV5 CNMG RV a b CNMG543-RV5 CNMG RV a b CNMG544-RV5 CNMG RV a b Fo dimensions, see the ISO 1832 designation key = Coated cabide Optimum indexable inset o Good Aveage oo machining conditions

7 ISO tuning Negative hombic 55 DNMG d 55 l s Indexable insets ANSI Desciption Desciption DNMG331-FV5 DNMG FV a b DNMG332-FV5 DNMG FV a b DNMG432-FV5 DNMG FV a b DNMG441-FV5 DNMG FV a b DNMG442-FV5 DNMG FV a b DNMG332-MV5 DNMG MV a b DNMG432-MV5 DNMG MV a b DNMG442-MV5 DNMG MV a b DNMG442-RV5 DNMG RV a b DNMG443-RV5 DNMG RV a b Fo dimensions, see the ISO 1832 designation key = Coated cabide Negative squae SNMG d 90 l s Indexable insets ANSI Desciption Desciption SNMG432-MV5 SNMG MV a b Fo dimensions, see the ISO 1832 designation key = Coated cabide

8 ISO tuning Negative tiangula 60 TNMG 60 d l s Indexable insets ANSI Desciption Desciption TNMG331-FV5 TNMG FV a b TNMG332-FV5 TNMG FV a b TNMG331-MV5 TNMG MV a b TNMG332-MV5 TNMG MV a b TNMG332-RV5 TNMG RV a b Fo dimensions, see the ISO 1832 designation key = Coated cabide Negative hombic 35 VNMG 35 d l s Indexable insets ANSI Desciption Desciption VNMG331-FV5 VNMG FV a b VNMG332-FV5 VNMG FV a b Fo dimensions, see the ISO 1832 designation key = Coated cabide Optimum indexable inset o Good Aveage oo machining conditions

9 ISO tuning Negative tigon 80 WNMG d 80 l s Indexable insets ANSI Desciption Desciption WNMG432-FV5 WNMG FV a b WNMG332-MV5 WNMG MV a b WNMG431-MV5 WNMG MV a b WNMG432-MV5 WNMG MV a b WNMG433-MV5 WNMG MV a b WNMG432-RV5 WNMG RV a b WNMG433-RV5 WNMG RV a b Fo dimensions, see the ISO 1832 designation key = Coated cabide Optimum indexable inset o Good Aveage oo machining conditions

10 Technical inomation Cutting data o tuning insets Negative basic shape Cabide gades The speciied cutting data ae aveage ecoended values. Fo speciic applications, adjustment is ecoended. = Cutting data o wet machining = Dy machining is possible Cutting mateial gades Stating values o cutting speed v c [m/min] Mateial goup Oveview o the main mateial goups and code lettes Binell hadness HB Tensile stength R m psi x 1000 Machining goup 1 [in/ev] [in/ev] C 0.25% Annealed C C C C > 0.25 to 0.55% Annealed C C C Cabon steel C > 0.25 to 0.55% Heat-teated C C C C > 0.55% Annealed C C C C > 0.55% Heat-teated C C C Fee-machining steel (shot-chipping) Annealed C C C Annealed C C C Heat-teated C C C Low-alloy steel Heat-teated C C C Heat-teated C C C High-alloy steel and Annealed C C C Hadened and tempeed C C C high-alloy tool steel Hadened and tempeed C C C Stainless steel Feitic/matensitic, annealed C C C Matensitic, heat-teated C C C Austenitic, quench hadened M1 C C C M Stainless steel Austenitic, pecipitation hadened (H) M2 C C C Austenitic/eitic, duplex M3 C C C Malleable cast ion Feitic K1 C C C ealitic K2 C C C K Gey cast ion Low tensile stength K3 C C C High tensile stength/austenitic K4 C C C Cast ion with spheoidal gaphite Feitic K5 C C C ealitic K6 C C C CGI K7 C C C Aluminium wought alloys Not hadenable 30 - N1 Hadenable, hadened N2 12% Si, not hadenable N3 Cast aluminium alloys 12% Si, hadenable, hadened N4 > 12% Si, not hadenable N5 N Magnesium alloys N6 Unalloyed, electolytic coppe N7 Coppe and coppe alloys Bass, bonze, ed bass N8 (bonze/bass) Cu alloys, shot-chipping N9 High-stength, Ampco N10 Fe-based Annealed S1 Hadened S2 Heat-esistant alloys Annealed S3 Ni- o Co-based Hadened S4 Cast S5 S ue titanium S6 Titanium alloys α and β alloys, hadened S7 β alloys S8 Tungsten alloys S9 Molybdenum alloys S10 Hadened and tempeed 50 HRC H1 Hadened steel Hadened and tempeed 55 HRC H2 H Hadened and tempeed 60 HRC H3 Hadened cast ion Hadened and tempeed 55 HRC H4 Themoplastics Without abasive illes O1 Themosets Without abasive illes O2 lastic, glass-ibe-einoced GFR O3 O lastic, cabon-ibe-einoced CFR O4 lastic, aamid-ibe-einoced AFR O5 Gaphite (technical) 80 Shoe O6 C C Recoended application (the speciied cutting data is egaded as stating values o the ecoended application) C ossible application = Coated cabide Note: I dy machining is possible, the tool lie is educed by 20 30% on aveage. 1 The assignment o the machining goups can be ound in the Geneal Catalog. 9

11 Technical inomation Cutting tool mateial application table Cabide Mateial goups Application ange Walte gade designation Standad designation M K N S H O Steel Stainless steel Cast ion NF metals Diicult-tomachine mateials Had mateials Othe Coating pocedue Coating composition Example indexable inset 10 M 20 K 20 C C C C CVD TiCN + Al 2 O 3 + TiN 20 M 20 K 20 C C C C CVD TiCN + Al 2 O 3 + TiN Geomety oveview o tuning insets Negative basic shape Finishing Mateial goups M K N S H O Geomety Remaks/ield o applications Steel Stainless steel Cast ion NF metals Diicult-to-machine mateials Had mateials Othe Section Main cutting edge Section Cone adius [] [] FV5 Finishing steel mateials Can also be used in semi-inishing C C C C [ ] [ ] Medium machining MV5 Univesal geomety o steel mateials Wide ange o applications C C C C 15 R R [ ] [ ] Roughing RV5 Roughing steel mateials Roughing ductile cast ion C C C C [ ] [ ] R Coent: Sectional views show CNMG432.. = Coated cabide C C imay application C Additional application 10

12 Walte GS The latest geneation o tool navigation. Find the ight tool with a click o the mouse In just ou clicks, Walte GS takes you om the deinition o you taget to the most cost- eicient tool and machining solution. Walte GS is supisingly compehensive. Whethe dilling, theading, tuning o milling: All the inomation about all Walte, Walte Titex and Walte ototyp tools ae instantly thee o you to see. Access mandatoy usage data, such as accuate cutting data o pecise cost-eiciency calculations, on you sceen. Walte GS is now also available o smatphones and tablet Cs. This means that you ae able to access all the equied tool inomation at any time, wheeve you ae, even without a C: In the wokshop, at the machine o on the move. walte-tools.com

13 Walte USA, LLC N22W23977 RidgeView akway West Waukesha, WI 53188, USA hone: Fax: Walte Canada Walte Tools S.A. de C.V. Ca. Estatal KM 2.22 #431, Módulo 3, Inteio 19 y 20 El Coloado Galindo, Municipio El Maqués, Queétao, C , México hone: +52 (442) sevice.mx@walte-tools.com TDM Systems Inc N. Roselle Rd. Suite 800 Schaumbug, IL 60195, USA hone: ino@tdmsystems.com inted in the USA , ED-# (12/2017) Subject to change without pio notice