PRODUCT SPECIFICATION

Transcription

1 ALB-C-1-26W-CF-W-O-RING Product description Weblink: 131 Design: Jens Møller-Jensen Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as clear or white opal glass, depending on the desired light source. Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated. Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized, extruded steel. Housing: Die cast aluminum. Mounting: Surface: Mounted directly over a recessed 4 octagonal junction box. Weight: Max. 6 lbs. Label: culus, Wet location. IBEW. Product code Light source Voltage Finish Shade ALB-C 1/26W/CF GX24q-3 1/100W/A-19/CL medium V 120V BR ST STEEL GALV WHT WITH SATURN RING WITHOUT SATURN RING a. CF variant provided with one V integral electronic ballast. b. CF variant provided with an opal glass lamp diffuser. c. Incandescent variant provided with clear glass lamp diffuser. d. Incandescent variant only available in 120V. I. Stainless steel versions are only for indoor use. II. The comparable EU version has the following classification: Ingress Protection Code: IP44. 1/3

2 ALB-C-1-26W-CF-W-O-RING Material description 2/3

3 ALB-C-1-26W-CF-W-O-RING Light measurements 3/3

4 Design Jens Møller-Jensen I1 Light source Voltage Weight Electric shock protection Ingress protection 1/26W/CF GX24q V 6.0 Lbs Cl. II, Wet location IP 44, Grounded 1/100W/A-19/CL Medium 120V Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<122 F/ 50 C) with a mild detergent. Warning: Scouring powder and similar substances will scratch surfaces. All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor. The installer must ensure that the ceiling can support the luminiare s weight. The installer must if necessary reinforce the ceiling structure by adequate means. Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale, Florida

5 44207-I1 1 CONNECT WIRES TO JUNCTION BOX IN CEILING 4.3" 3 2 x 3 - Green to Green (ground) - White to White - Black to Black 4.3" 2.45" 1 2 Mount the luminire junction box to the ceiling, over a 4 junction box or directly to the junctionbox (remove knockouts) 3 NOTE: FOR WET LOCATION, THE INSTALLER MUST PROVIDE A BEAD OD SILICONE AROUND THE JUNCTION BOX 4 4 Octagonal junction box Rawplugs Screws Expansion bolts (Not provided) The installer must ensure to use proper means (rawplugs/screws/expansion bolts) to secure the The installer must if necessary reinforce the ceiling structure by adequate means Use only light source in accordance to the lamp replacement label on the luminaire

6 Design Jens Møller-Jensen Concept Finish The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the ceiling. The anti-glare ring prevents horizontal glare. The diffuser is clear or white opal glass, depending on the desired light source. Galvanized. Stainless steel, brushed and lacquered. White, powder coated. Material Mounting Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or die cut galvanized steel. Anti-glare ring: Spun aluminum, spun stainless steel or extruded galvanized steel. Housing: Die cast aluminum. Surface: Mounted directly over a recessed 4 octagonal junction box. Weight Max. 6 lbs. Label culus, Wet location. IBEW. Product Code Light source Voltage Finish Diff./Encl./Glass Shade ALB-C 1/100W/A-19/CL medium V BR ST STEEL CLEAR WITH SATURN RING 1/26W/CF GX24q-3 120V GALV OPAL PAINTED WITHOUT SATURN RING WHT Specification notes a. CF variant provided with one V integral electronic ballast. b. CF variant provided with an opal glass lamp diffuser. c. Incandescent variant provided with clear glass lamp diffuser. d. Incandescent variant only available in 120V. Info notes I. Stainless steel versions are only for indoor use. II. The comparable EU version has the following classification: Ingress Protection Code: IP44.

7 ALB-C-1-100W-INC-W-RING Product description Weblink: 131 Design: Jens Møller-Jensen Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as clear or white opal glass, depending on the desired light source. Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated. Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized, extruded steel. Housing: Die cast aluminum. Mounting: Surface: Mounted directly over a recessed 4 octagonal junction box. Weight: Max. 6 lbs. Label: culus, Wet location. IBEW. Product code Light source Voltage Finish Shade ALB-C 1/26W/CF GX24q-3 1/100W/A-19/CL medium V 120V BR ST STEEL GALV WHT WITH SATURN RING WITHOUT SATURN RING a. CF variant provided with one V integral electronic ballast. b. CF variant provided with an opal glass lamp diffuser. c. Incandescent variant provided with clear glass lamp diffuser. d. Incandescent variant only available in 120V. I. Stainless steel versions are only for indoor use. II. The comparable EU version has the following classification: Ingress Protection Code: IP44. 1/3

8 ALB-C-1-100W-INC-W-RING Material description 2/3

9 ALB-C-1-100W-INC-W-RING Light measurements 3/3

10 ALB-C-1-100W-INC-W-O-RING Product description Weblink: 131 Design: Jens Møller-Jensen Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as clear or white opal glass, depending on the desired light source. Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated. Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized, extruded steel. Housing: Die cast aluminum. Mounting: Surface: Mounted directly over a recessed 4 octagonal junction box. Weight: Max. 6 lbs. Label: culus, Wet location. IBEW. Product code Light source Voltage Finish Shade ALB-C 1/26W/CF GX24q-3 1/100W/A-19/CL medium V 120V BR ST STEEL GALV WHT WITH SATURN RING WITHOUT SATURN RING a. CF variant provided with one V integral electronic ballast. b. CF variant provided with an opal glass lamp diffuser. c. Incandescent variant provided with clear glass lamp diffuser. d. Incandescent variant only available in 120V. I. Stainless steel versions are only for indoor use. II. The comparable EU version has the following classification: Ingress Protection Code: IP44. 1/3

11 ALB-C-1-100W-INC-W-O-RING Material description 2/3

12 ALB-C-1-100W-INC-W-O-RING Light measurements 3/3

13 ALB-C-1-26W-CF-W-RING Product description Weblink: 131 Design: Jens Møller-Jensen Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as clear or white opal glass, depending on the desired light source. Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated. Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized, extruded steel. Housing: Die cast aluminum. Mounting: Surface: Mounted directly over a recessed 4 octagonal junction box. Weight: Max. 6 lbs. Label: culus, Wet location. IBEW. Product code Light source Voltage Finish Shade ALB-C 1/26W/CF GX24q-3 1/100W/A-19/CL medium V 120V BR ST STEEL GALV WHT WITH SATURN RING WITHOUT SATURN RING a. CF variant provided with one V integral electronic ballast. b. CF variant provided with an opal glass lamp diffuser. c. Incandescent variant provided with clear glass lamp diffuser. d. Incandescent variant only available in 120V. I. Stainless steel versions are only for indoor use. II. The comparable EU version has the following classification: Ingress Protection Code: IP44. 1/3

14 ALB-C-1-26W-CF-W-RING Material description 2/3

15 ALB-C-1-26W-CF-W-RING Light measurements 3/3